How to change Spark plugs on a 2007 zx10r!
ฝัง
- เผยแพร่เมื่อ 24 พ.ย. 2024
- in this video i will be showing you the process of changing your spark plugs on a zx10r, this works for years 2004-2007. i will be including tips and helpful information that will help you with this process.
Very good video! Thanks for sharing the process. I just bought a zx10r 2007 and it has a rough idle not sure if it's from spark plugs. Hopefully changing them will fix the problem. It has yoshimura loud exhaust not sure if it's a fuel map/ o2 sensor no back pressure from the yoshimura. I don't even know if it's a full exhaust or just a slip-on. It rides nicely above 3000rpm but below that it jumps up and down worrying it will break the chain or destroy something so below 3rpm especially when I just start the bike I have to have my hand on the clutch so I can catch it when it starts jerking before it fucks up the transmission or chain. once I start going no more problems. the bike has only 12800miles on it. It also had no charging so I had to replace the stator. guy cheated me with the bike not charging sold it to me while he was charging the battery through the wall. scammers.
How the hell did you get the coil on the end out ? It hits against the frame.
Asshole cut the video so he didn't have to show himself getting his ass kicked. I'm doing a valve cover gasket right now and hit the same problem.
Justo por eso busque el vídeo y no lo muestra
DUDE DONT DROP THE PLUGS LIKE THAT, use the magnet to gide them down, you can hurt the the tip by droping them, magnet is good just wiggle it and the magnet comes off.
Como sacaste la bobina de la orilla?
Yea gang 💪🏾
💪🏾💪🏾
Very. Good😊
Hii, i need some if the spare parts of the same bike. Kindly help
I recommend checking Facebook market or eBay
how to remove air duct tubes?
Typically just have to turn them back and forth, like wiggle them out. Shouldn’t be hard getting them out, it is tougher getting them back in!
A shop is charging me 360 for this job is that okay?
No😂
Yes
Shop labor rate is probably 150 an hour and they will have more than 2 in it. It costs money to pay people to maintain your stuff
the air ducts are a royal pain in the arce, to get out and worst to get in, you didnt show that part, to get out just pull and wiggle, to get in they go in better if you heat them up a bit with a hair driyer and lube them with WD40. 👌👌👌👌👌
It was hard to show how I got them in by me recording and working with one hand, but I didn’t have to much trouble with them just worked them in
💪🏾💪🏾