How to change spark plugs on a 2011-2014 Kawasaki Zx10r
ฝัง
- เผยแพร่เมื่อ 28 พ.ย. 2024
- 2014 Zx10r spark plug change, done by yours truly.
Step by Step Process
1. Remove Rear seat and rear fairing (Use your key to take off rear seat first) then use a (3mm Allen key)
2. Remove front seat (5mm Allen key)
3. Disconnect your battery (Screwdriver)
4. Take off tank bracket ( 5mm Allen key)
5. Take off side fairings (4mm Allen key)
6. Take off the side bolts holding the tank in (5/16 socket) (usually a 8mm socket)
7. At this point the tank will be able to pull up. There are two vent lines that are clamped in. Squeeze the end of the clamps together to loosen it. If you have trouble use a needle nose pliers. Be super careful though
8. Disconnect fuel pump line that runs under the tank. (You'll be able to see it once its lifted up) Dont pull to hard, you don't want to damage it.
9. Disconnect the main fuel line (shown with the red clamp in the video) and stand clear. Most of the time fuel will leak out, so just be ready. After this the tank will come right off. Place is safely and not on its side or in any position to potentially throw off the sensors.
Airbox Removal
1. Unfasten the upper injectors on top (as shown in the video)
2. Loosen the 10mm bolts on the steering damper (doing this will free up some space)
3. Grab your 5mm Allen key and loosen the bolt that's holding the airbox in at the front. Its right up under the steering damper (as shown in the video)
4. Take off the tank bracket on the side (10mm) this makes it so much easier to access the 4mm bolts you'll have to get to.
5.Take off the fuel line on the front of the airbox. (They supply your upper injectors so just know some fuel will come out)
(NOTE : you don't have to remove fuel line on the bottom portion, but you can. It will make the process easier. In the video I didn't)
6. Remove the crankcase breather (Thick black tube)
7. Remove drain tube (white tube, next to thick black tube)
8 Remove the vent tube.
9. Remove both hose clamp bolts 4mm (BALL Allen key)
10. Remove your relays from the relay box in order for it to completely come up.
This is the way I conducted my spark plug change. Just know there are different orders you can go in, and some people have their own preference. For anybody wondering, I had to get my spark plugs from auto zone because no motorcycle shop carried them on hand. Of course they are NGK, spark plugs. Be sure to look up your specific spec for your bike and remember where everything goes. If you have any questions comments or concerns then hit me up directly on my email listed on my channel or leave a comment. Thanks for tuning in.
Follow me on social media
voicebehindthehelmet
Pointless Tags :
#airboxremoval, #sparkplugchange, #zx10r, #kawasaki, #motolife, #Doityourself, #DIY, #youtubemechanic, #motovlog, #motovlogger, bestmotovlogger, #femalevlogger, #femalerider, #motorcycle, #moto, #bikelife, #kawasakizx10r, #gopro, #gopro8, #ducati, #suzuki, #gsxr, #honda, #bmw, #s1000r, #yamaha, #therapy, #motorcyclemaintenance, #itsgotime, #voicebehindthehelmet, #voicebehind, #everyonematter, #bikelifematter, #nightlife, #rideorwrong, #rider,
It's good that you show maintenance on your bike bc a lot of times it that's a huge question for ppl when choosing a new bike
11:09 missed the catch on the front of the saddle before screwing the saddle down, installing the rear fairing, and the passenger seat...FAIL😂 jkjk great video. That garage is immaculate😍
I wonder if it’s good to put dilectric grease on the plugs and coils
Shorty....I’m proud of you bra. Keep it ip
I truly appreciate that ✊🏾
The voice behind the helmet You know it’s always been love 🤞🏾❤️
U go girl like to see more women get their hands oily
girl? she's a bad dude
Did you ever experience your ESD warning light indicator coming on after changing the spark plugs? Mine seem to come on after I changed them. Some forums say it could be a loose connection in wire or a battery but I’ve made sure my connections are good and a new battery. I’ve taken my bike apart like 30 times before and never had this problem.
I haven't but mine came on cause my stabilizer needs to be replaced. Take it out and then put it back in. There's an end on it that pops out
Notifications ✊🏽run these watch hours up
I appreciate you 🤟🏾✊🏾
My coils aren’t budging when i try to left them. I’m not sure if it’s supposed to be at a certain spot or what but it’s not working.
Are you using the universal joint ? So for each one, try and turn them left. See if you can get some play out of it. Once you do that, try and take the universal off and hand twist it to the left
@@Thevoicebehindthehelmet 😂 as soon as I posted this I managed to get them off. Just took a little tlc, wiggling and pulling up. Your vid helped a lot though I appreciate it.
@@jaymelisreal6477 no problem ! I’m glad it helped 🙏🏾
👍👍👍