Honda Odyssey Enable factory reverse camera Connect module to work with car information on android
ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2024
- 2013 Honda Odyssey,
This video is how to find video signal from factory reverse camera wires . The hidden settings are can be accessed with codes from the video on android radio. Most android radio uses same codes and steps to change all hidden steps
These are the links for the parts
Testlight
www.harborfreight.com/612v-ci...
Android module
www.harborfreight.com/612v-ci...
Perfect great properly now thank you rever also work
Big boss everything work fine thank you. Fix you links the android module take you to.harbor f
😅
Boss everything work perfect only dont work is inform like miles and everythin on top display beside that everything work fine i can see the camera but no info
Great videos. I am planning to install this Android player on my 2014 Honda Odyssey Touring. Based on your recommendation I need to purchase the following parts:
1- 8 Core 4+64GB Android 13 Double Din Car Stereo Wireless Apple Carplay, 7 Inch Touchscreen Android Auto Car.
2- 16pin Car Radio Stereo Power Retrofit Harness Cable Wire for Honda CRV Civic 2012 13 14 15 with Radio Antenna Adapter
3- Metra 70-1729 Radio Wiring Harness for Honda 2008-Up
4- Metra 99-7880B Single/Double DIN Dash Installation Kit for 2011-Up Honda Odyssey Vehicles
5- Metra 40-HD11 2009-Up Honda Antenna Adapter Cable.
If this list is correct, please let me know. Thank you!
The kit and antenna adapter is fine but you need to get a module not the harness from metra
Please follow the Link on description
@@goautosound1 Thanks! So I only need the module that was made for the Honda CRV by Raise.
@KyleRoyal-kh2yq yes, click the link on the description it should work like ours
Don't forget to subscribe 😉
Good afternoon one if I want to remove the screen from above, because I found an Android radio that fits perfectly above could I use those same cables to connect the camera, oh the camera only works if it is connected to the original unit?
@@Ape-GG no ,you have to do what we did on the video
Big boss how did you connext to the old bracket because the radio bring small bracket that donr fit even in the old brackets thank you for everything work now even doors shows thank you
Before anything, Please subscribe our channel 🙏
Yes, we did use factory mount. You must reconnect factory radio and set all controls, and then the settings will remain on the top until the car battery is disconnected
@@goautosound1 cool but did camera take lil second to start thats normal. Or something wrong t
can use just a wire to test the signals?
Good question. The reason that you don't want to use a wire is that some wires have power and digital signals .If you use a wire to ground, it will damage the power or unit itself