Home Automation using ESP8266 & Blynk 2.0 with Real-Time Feedback II STEP BY STEP GUIDE

Home Automation using ESP8266 & Blynk 2.0 with Real-Time Feedback
In this IoT project, we will learn how to make an IoT-based Home Automation project using ESP8266 and the new Blynk 2.0 IoT app to control a 4-channel relay module from the manual switch & smartphone. The project has Real-Time Feedback System. We can use the Blynk IoT app from anywhere in the world & using Internet Connectivity we can monitor the real-time feedback in Blynk 2.0 IoT App or Blynk cloud web dashboard.
This tutorial is all about Controlling Peripherals like AC Appliances or bulbs via Relay from Blynk 2.0 IoT App or Blynk cloud web dashboard using ESP8266 WiFi Module. We would basically call it a Home Automation Project. Home automation is the automatic control of electronic devices in your home. These devices are connected to the Internet, which allows them to be controlled remotely.
Blynk Library: github.com/blynkkk/blynk-library
CODE & CIRCUIT DIAGRAM:drive.google.com/file/d/1xAOP...

[@Becrafty-ju4oz]

Thank you sir for this project ❤

[@manassesoliveira2743]

VERY VERY GOOD, THIS IS THE BEST... This was the only one that could make it work here. thank you my friend. Success in your projects.

[@360viewplus]

Thanks you so much for your valuable reply......

[@MangeshGovalkar]

Hey man, I can't thank you enough for this video. You are my life saviour I chose this as my last year project but I had issues with the code, your code works perfectly fine which helped me a lot. Out of all the videos on yt this was the best! Thank you once again @360 View Plus.
Kuddos to your work!🤝🏻

[@360viewplus]

Thank you so much for you positive comments.Keep subscribe and watch my channel.It will beneficial for you.Thank you ..

[@suvamkumarnayak]

Thanks for your effort.successfuly completed this project.keep going.

[@360viewplus]

Thank you so much for your positive reply and support.Subscribe my channel for more videos dude.

[@pselvaraj4911]

useful Project

[@MrCrumbled]

Super sir

[@user-eg2pc1rj5t]

Awesome project

[@carloscanetcanet2740]

I can not find you simple 4 chanel in the library.If I may!

[@youtubegame741]

Nice

[@hakiimnaparialhassan5062]

Supper sir! but my web dashboard is showing offline but i didn't connect any relay to the nodemcu. without that will it show online offline

[@fmtech1867]

What do you use to give power to nodeMCU? Usb with laptop or adopter

[@360viewplus]

Power bank

[@360viewplus]

I have used power bank to power up

[@raghavendradarji4863]

Good iam understand it's ok

[@360viewplus]

Thank you for your support

[@carloscanetcanet2740]

foundit,Thanks

[@360viewplus]

Thank you

[@aimanfirdaus2581]

hi admin, can you do a program with esp32 please :(

[@360viewplus]

Sure.omce done I will update....

[@mehradeel]

Kya hum bulbs ke jga electricity sockets lga skte jis me bade me koi bhe chez chla se...

[@360viewplus]

Kindly tell me in English bro.I will explain...

[@mehradeel]

@@360viewplus Can we use electrical sockets instead of light bulbs so we can run anything. I want to used it to run 5 water pumps of 12v

[@360viewplus]

Sure bro.You can use electrical socket.You can run any electrical appliances.

[@abdullahalhasan3880]

Sir, I am unable to upload the code.
It erors showing "please spacify your BLYNK TEPLATE ID and AND BLYNK TEMPLATE NAME". Please help me to get out of this problem.

[@360viewplus]

Template ID and Name will be generated automatically when you enter into Blynk ID

[@0124akash]

Relay module se ESP32 wiring connection ko kon sa protocol bolenge sir ?

[@360viewplus]

I have given in detail about how to connect relay.rewind the video and go through it slowly.you will get a clear

[@0124akash]

@@360viewplus connection kahan aur kaise karna hai ye to clear hai. Ye connection ko bolenge kya ? I2C, UART, SPI, RJ45, RS232 inme se kon sa protocol ka use kiya hai sir ?

[@topmost2481]

I not have lap now so I will try in my android its work or not

[@360viewplus]

To make Blynk dashboard you need system

[@adamrahmawan567]

Sir, why doesn't the output of my relay work, what's the problem? Plisss answer sir

[@360viewplus]

Check required amount of power given to relay

[@robotrobot7489]

Super nice sir

[@sibisk2599]

Can you send the Arduino program code .

[@360viewplus]

Kindly check in the description

[@sibisk2599]

@@360viewplus in guithub I can't find the exact program can you send exact link of the program

[@bipradipkushari1002]

Fatal python error aharaha hai sir, abhi kya karna padega. Please bataya....

[@360viewplus]

Kindly follow the steps shown in the video.Definitely it will work dude..

[@angadsingh2609]

sir is there need of giving the template nama..?

[@360viewplus]

No need dude

[@hakiimnaparialhassan5062]

sir please my device is offline help me out

[@360viewplus]

Kindly put correct token number and also put your SSID and password. ensure you have good internet connection

[@hakiimnaparialhassan5062]

@@360viewplus OK SIR every thing is intact

[@cartoontelugu6890]

hy bro my code working good but device showing offline in web and mobile

[@360viewplus]

Dude Make sure your network connection is well

[@cartoontelugu6890]

@@360viewplus bro wifi passward and user name correct but it showing offline only please help me bro

[@360viewplus]

Have you put your authentication token correctly?

[@cartoontelugu6890]

I changed the esp Now it is connecting and showing online but lights are not working

[@360viewplus]

@@cartoontelugu6890 Are you connected 220v BULB with relay?

[@motivationalandromantic]

Sir circuit diagram

[@360viewplus]

Check in the description dude

[@360viewplus]

Code and circuit diagram given in the description

[@AsadAli-mz1ou]

bro,your email address?

[@360viewplus]

For what bro?

[@Trazo176]

Super sir

[@Trazo176]

Super sir

[@boobalanponnusamy3920]

Super sir