Google Assistant V2 Home Automation and Blynk IOT | Google Assistant V2 Projects
ฝัง
- เผยแพร่เมื่อ 25 ต.ค. 2022
- Home Automation Using Google Assistant V2 and Blynk IOT | Google Assistant V2 Projects | ESP 8266 | IOT Projects
In this experiment we can see how to do Home Automation using Google Assistant V2
Required Components
==================
1. NodeMCU
2. Relay
Components Link
===============
1. NodeMCU - robu.in/product/nodemcu-esp82...
2. Connecting Wires - robu.in/product/30pcs-flexibl...
Software Required
===============
1. Arduino IDE - www.arduino.cc/en/main/software
2. Programming Language - C Language
Source Code
==========
github.com/Tech-Trends-Shamee...
Reference Video of Arduino/ESP8266/ESP 32 Projects
==================================================
Blynk 2.0/Blynk IOT Projects
• Control LED using Blyn...
ESP8266/NodeMCU Projects
• ESP8266 - Node MCU Pro...
LCD Display Projects | Arduino
• How to Display Text in...
GSM SIM Module Projects
• GSM SIM 800 C Caller I...
DHT11 Temperature Sensor Projects
• Weather Station | Temp...
Arduino IOT Cloud Projects
• Temperature and Humidi...
OLED Display Projects
• Temperature Display in...
ESP32 Projects
• ESP32 Temperature Web ...
Music: www.bensound.com
♥ Facebook: / techtrendsshameer
♥ Instagram: / tech_trends_shameer - วิทยาศาสตร์และเทคโนโลยี
Oh god finally I found this.....every tutorial was based on the older version of blynk...but this one is too good....Thank you sir🙏🏽
You're welcome 😊. Please subscribe.
thank you from the bottom of my heart
Welcome. Keep supporting ♥️
@@TechTrendsShameer did you make any video of Blynk and Siri?
thank u soo much for this sir we love u a lot😘❤️
Most welcome 😊
Nice keep it up sir
Thank you. Keep watching
@@TechTrendsShameer in iffttt after clicking activate scene, there is no option called scene name and create trigger it is not showing anywhere, help
Thanks a lot sir subscribed right away
Welcome!
Very excellent explanation sir.tnq
U use a relay low trigger or high trigger sir? Pliss answer
is there a way to make 2 pins high with only 1 webhook?
In the previous version of Google assistant we could send a specific value number through IFTT. How can we do the same in this version of Google assistant?
I can only use Goolge Asisstant to turn the light on and off on Dashbord on Blink but the light does not light up? Do you have a solution?
Sir but for me I said activate turn on the light it means home assistant says " sure activating turn on the light and it may loading .... Sir what is the problem heare can you explain
When the light is on, the relay is activated and the lights are turned on, but when the light is turned off, although the code I entered into the webhook is correct, these lights are not yet installed, it gives the answer that you can do this from the assistant settings. I couldn't find a solution. Can you help me in any way?
Sir when i try to send the command through google assistant , it is taking me to the device linking part. But i have linked the ifttt with my google home and ifttt is present there in the linked devices area. Need your help sir
Sir please make vedio on operatinf fridge using mobile phone with help of aurdino....
Will try.
sir, please make a project on esp 32 google assistant v2 ,blynk iot home automation
sir if possible make a video on how to file a 'patent' on the project. Its very useful sir please make a video on this
Ok I will try
@@TechTrendsShameer
Hello Sir, I am facing issues with relay.
My relay is getting NC to NO.. on applying both 3Volt and ground
When I touch input pin of relay to 3volt of nodemcu it gets switched... And if i also connect it with ground pin of nodemcu..it also switched on
thanks
Welcome. Project working?
@@TechTrendsShameer trying
@@TechTrendsShameer have a little problem with google assistance and ifttt sync
@@TechTrendsShameer now. it working!
@@TechTrendsShameer many thanks
Hello sir, please how can i go about my URL auth token i dont know how to go about it, am from Nigeria thank you.
is there any available url link region location ? 4:56
Sir I have initialized virtual pin in blynk Data stream so how should I connect it with IFTTT means what pin I should mention as you have mentioned about D4 but I have used Virtual pin so what should I do
Use that virtual pin in the webhooks URL and try
@@TechTrendsShameer Not working
Sir, I have a question about the source code in your GitHub "void setup()" and "void loop()" is empty. How can it control the device?
It's not empty. blynk.run() will take care
Hello sir this project is nice but I want two chanel relay connections sir please
Did you do it? We have the same problem
how to turn all devices on or off with google assistant v2
Why we are connecting signal pin to D2 sir but we have used D4 in all other part of the project
Its based on the pin configuration of ESP8266.
D2 = GPIO4
D4 = GPIO2
Bro webhooks pro is only there it ask payment what should i do
same issue here!!!!
Sir, how to do this same work, using raspberry pi?
Kindly help me out
I haven't tried raspberry pi yet. I will try and let you know.
sir i dont have vu pin in node mcu what should i connect it to? i did it by keeping to v3 but its not working
Try Vin pin
@@TechTrendsShameer sir i connected vin pin ..but not working.. any solution for that?
Hello Sir, I am facing issues with relay.
My relay is getting NC to NO.. on applying both 3Volt and ground
When I touch input pin of relay to 3volt of nodemcu it gets switched... And if i also connect it with ground pin of nodemcu..it also switched on
May be your relay will not work on 3 v
When we upload the program from arduino ide sir?
Didn't get you. Please explain.
sir try to make a video on a robot using blynk iot
ok sure.
plz give me the url link
Its in the video. Please watch the full video.
Sir I don't have option of scene name it's only connect what should I do?!!
Pls send the screenshot in Instagram
Sir I created applets and goggle assistant reply also but I am not getting the output!
@ Tech Trends Shameer I am not getting the output plz help me!!
let me know the problem you are facing
hello sir, iftt i have connected with google assistant but it can't work. can you help me sir??
please..
Let me know the problem you are facing.
Sir can you help for this project iam trying to do this project in my clg how I contact with you
Sir reply sir pls
Sir I not able to get that url !
docs.blynk.io/en/blynk.cloud/troubleshooting
Hi can we get your contact for my son's school project
Please message me in Instagram. instagram.com/tech_trends_shameer
It show invalid token sir
Please use your token. Not mine
I am facing issues with relay.
My relay is getting NC to NO.. on applying both 3Volt and ground
When I touch input pin of relay to 3volt of nodemcu it gets switched... And if i also connect it with ground pin of nodemcu..it also switched on
Sir why my circuit is working slow...as bulb glows after 5-6 seconds...
Whether you added any delay in the code ?
i did everything right and i have only doubt in the circuit sir can u explain it clearly? for which wire we should connect the other wire?
I didn't understand your question. Can you please explain in detail?
i mean that explain the circuit diagram more clearly without skipping even a small step.
Sir i did the project successfully working 👍
Great
@@pavansravanam6472 its not working..which nodemcu module u used
Can i get the code sir?
please check video description.
@@TechTrendsShameer not found sor
Its there under Source Code in the video description.
Fatal eror😢😢
Please send me the full error message.
How to connect IFTTT to google home
I am unable to do so
I tried but IFTTT is not getting added in home services
Anybody any suggestions??
Please check the full video and follow the same steps.
Not working help
Follow the full video without missing any step. It will work.
@@TechTrendsShameer I followed everything but not working
In Google home I search ifttt from the result 2device is connected is this correct or wrong
@@spythamilyt4320 Unlink and link it again and try. Also the email which you used in your mobile and IFTTT should be same.
@@TechTrendsShameer same account only
hello sir i need ur help how can i contact you
Please contact me in instagram
Sir but for me I said activate turn on the light it means home assistant says " sure activating turn on the light and it may loading .... Sir what is the problem heare can you explain
hello sir, iftt i have connected with google assistant but it can't work. can you help me sir??
May I know the problem you are facing?