Thank you for making these videos! I just started Netcad Cisco and was having trouble because our classes are now virtual due to COVID and not in a class, so my teacher is not always there to explain how to properly do these. Then I discovered you and how you elegantly breakdown each step and explain each step. Thank you again so much for making these!
You are so welcome! And thanks for your great support and sharing my dear friend....!! Also you are always welcome if you get any trouble. Please feel free to contact our team using our website, link will get from description.
@@TechAcad Additional Clarity for others: Typically, link-local IPv6 addresses have “FE80” as the hexadecimal representation of the first 10 bits of the 128-bit IPv6 address, then the least-significant 64-bits of the address are the Interface Identifier (IID). Note, that no matter the specific names and IP addresses in your packet tracer exercise, "FE80::1" is appropriate to use.
when you were filling out the information into the excel spreedsheet for the ipv6 information how did you come up with the custom ipv6 addresses? im super confused
I've been following all your package tracers but this one only gave me up to 93% completion. I matched your completion before you exited but I found one or two things which I can't remember which I got it up to 93%. The thing that really stomped me was the IPv6 addresses were incorrectly configured. I went and did a reset and did a different activity with a different person and I got 100%. I was a little hesitant about going back to you but so far I've done up to the modules in 17 and I've had no problem. I even guessed a couple things before you did which told me that I'm learning a lot from your videos. I would hope that you do a remake of this video and get 100%. The strange thing that I noticed is that one of the monitors had an fe80::2 which your layout did not have but in order to get an improved score I had to change it to that. There was one other thing I cannot remember what I did. Anyway keep on making your videos, but I would correct this one to make it 100%.
It seems some of these packet tracers are bugged to come degree, kind of weird considering the IPv6 addresses are set correctly but still come up incorrect it’s odd.
I have a query about something at 13:04 min of the video specifically the information that goes into the table for RTA 0/0 and 0/1 the information that goes into the third column of the table directly below ip address. I am unsure from where 2001:DB8:CAFE:1::1/64 2001:DB8:CAFE:2::1/64 FEB80:1 where this information comes from? Is it from the CLI on the router?
WARNING: for all those who watch this video it is NOT 100%. I like your videos a lot! unfortunately I would have liked to know from the beginning that It was not 100%, I lost a lot of time and I had to start from the beginning :c
where did you get the LAN number from when u did the description 25:00 , ive gone through everything and the instructions and the cisco packet activites
Awesome video. The activity was trying to be clever varying the requirements, but I managed to get 93%. I couldn't understand why the GigabitEthernets didn't like my IPv6 adresses on the router. My VLAN didn't like the IPv4 address. Regardless, everything pinged with one another. The missing 7% really bothered me, like where else am I supposed to get the "right" IP addresses?
Hello, I have just found your videos! This one is a total lifesaver! Is there anyway to post how to correct the mistakes that were left uncorrected. My score is up to 91 %. The vlan 1 ip add and G 0/0 IP ADD and G 0/1 IP ADD are not correct. As well as a local link. Any help with that? Thank you so much for your time and patience in going step by step with this!
I have a question, this has happened to me a couple of times trying to finish this PT. I clicked G0/0 by mistake and the cable disconnected. When I try to connect it back, G0/0 and the little red triangle disappeared. I can't undo what I did and I don't know how to get it back on there. Please help!
This is the most difficult and confusing lab yet. I got an entirely different set of numbers and it was really difficult to follow because of that. I did my best to do what you did but I just don't think I have enough understanding to make it out, unfortunately. I got stuck around 75%. You are just throwing out IP addresses left and right and changing them on the fly and I don't know how. If I have any other questions I'll just use the website I guess.
i have the same issue right now. I started with a completely different set of numbers as well, made it very difficult to follow, and I have more "incorrect" items in the list than his shows. My IPv4 ping keeps timing out, so something isn't right.
I know this is so much a year late but what I try to do is download a packet tracer reset the activity a few times until your activity matches his. This may take five to six resets or possibly more to do it.
Good video, but you didnt finish it. Also i notice when people ask questions, you direct them to your website. Please try to finish videos, and help people without sending them away from youtube.
to those that need help. Reset activity until the ipv6 for each lan is set to 2001...A and B instead of Cafe or acad. This is because the lab was not made correctly for the other two ipv6 topologies. The ip for the vlan must be 15 in last octet to score 100% Thank me later.
I can't seem to get past 34%. I completed the steps at 19:16 and forward but cannot get to 40% like you have at 21:06??? I deleted and reinstalled the Packet Tracer program, and will try again in an hour! Let me know what the potential problem could be, please!
@@blackman1467 i have not gone back to the assignment yet unfortunately. i still have till the 12th at midnight so im probably gonna procrastinate it a bit tbh lol.
At 24.52 where you are have "description of the LAN" where did you get 172.16.5.0? I have gone back several times to review and I can't figure out where you got that IP address from. Can you please assist?
I completed activity to 100%. I had to correct errors in the default gateway for User-3 and User-4. Then I put the correct ip address and subnet mask for ASw-2 after interface vlan 1.
thank you that was good I have reached 97% but i don't know how to get how to get 100% the platform shows that my vlan 1 ip address is wrong even i tried to make the ip address ends with 1 / 254 it didn't work any solutions ?
Hi You just contact us using our Website. So that you can share your Packet Tracer File. We will Troubleshoot it... Thank you so much for your great support my dear Friend...
i got a 100% thank you i need help how to do it all in 1 go and how to find stuff. the lessions go back and forth and it was confusing me but you just about simplify everything
I got stuck at 24:38, when I go to CLI to document the interfaces, it says "warning, User access verification" then it wants the password, but when I try to enter it, it does not appear and won't be enteted
This is the one activity, we have. And mostly the configurations may be the same with minor changes! Thanks for your great support and sharing my dear friend!
I tried to get the ipv4 for the non-accessible switch for almost an hour now, then looked this up and it seems you don't. It does not seem to be a requirement in the assessment items. -_-
Hi sir Whenever I try to open cli or terminal in it . I got only blank page. And it is not working I need your help in it. Please guide me sir what should I do know to make terminal running
I have another issue at 19:10 of the video. When I keep entering this command it keeps returning the same message . It seems to be the same command as on the video. RTA(config)#interface gigabitEthernet % Incomplete command.
After doing all the configuration I'm stuck with 55%. This are all the commands I've used College Router enable config terminal hostname College enable secret class line console 0 password cisco login line vty 0 15 password cisco login exit service password-encryption banner motd #Unauthorized access to this device is prohibited!# interface g0/0 ip address 128.107.20.1 255.255.255.0 ipv6 address 2001:db8:a::1/64 ipv6 address FE80::1 link-local description Link to Class-A no shutdown interface g0/1 ip address 128.107.30.1 255.255.255.0 ipv6 address 2001:db8:b::1/64 ipv6 address FE80::1 link-local description Link to Class-B no shutdown exit ipv6 unicast-routing end copy running-config startup-config Class-B Switch enable configure terminal hostname Class-B banner motd #Unauthorized access to this device is prohibited!# enable secret class line console 0 password cisco login line vty 0 4 password cisco login exit service password-encryption interface vlan 1 description Vlan 1 ip address 128.107.30.15 255.255.255.0 no shutdown end copy running-config startup-config
Thanks for commenting this, I was legit wondering if I downloaded the wrong file. I found that you can reset the activity multiple times until you get the one done in the video.
Thank you for making these videos! I just started Netcad Cisco and was having trouble because our classes are now virtual due to COVID and not in a class, so my teacher is not always there to explain how to properly do these. Then I discovered you and how you elegantly breakdown each step and explain each step. Thank you again so much for making these!
You are so welcome!
And thanks for your great support and sharing my dear friend....!!
Also you are always welcome if you get any trouble. Please feel free to contact our team using our website, link will get from description.
This is an absolutely fabulous presentation. May I tell you how valuable this video has been to my CCNA study . Keep up the great work!
Wow, thank you!
And if you like to get any support please feel free to contact us...
Thank you for all your help! You've honestly taught me a ton and have helped me enormously with grasping these concepts! Keep the videos coming!
Thank you so much my dear Friend for your great support...
Danke Inder, du rettest meinen Tag.
Schön, dass es geholfen hat!
THANK YOU!!!
Edit: How did get the link local address FE80::1 for the router at 12:39?
Hi
Here we used the link local address. You can use any address start with link local FE80::
Thank you so much for your great support dear Friend...
@@TechAcad Additional Clarity for others: Typically, link-local IPv6 addresses have “FE80” as the hexadecimal representation of the first 10 bits of the 128-bit IPv6 address, then the least-significant 64-bits of the address are the Interface Identifier (IID). Note, that no matter the specific names and IP addresses in your packet tracer exercise, "FE80::1" is appropriate to use.
@@brandonbierer4451 this was the answer I was looking for ! /clap
when you were filling out the information into the excel spreedsheet for the ipv6 information how did you come up with the custom ipv6 addresses? im super confused
Still confused, please feel free to contact our team, so that we will help you.
Finally someone who explained very clearly. Thank you for helping 😀
Glad it helped!
I even donated to you cause you're very helpful man!
Much appreciated!
I've been following all your package tracers but this one only gave me up to 93% completion. I matched your completion before you exited but I found one or two things which I can't remember which I got it up to 93%. The thing that really stomped me was the IPv6 addresses were incorrectly configured. I went and did a reset and did a different activity with a different person and I got 100%. I was a little hesitant about going back to you but so far I've done up to the modules in 17 and I've had no problem. I even guessed a couple things before you did which told me that I'm learning a lot from your videos. I would hope that you do a remake of this video and get 100%. The strange thing that I noticed is that one of the monitors had an fe80::2 which your layout did not have but in order to get an improved score I had to change it to that. There was one other thing I cannot remember what I did. Anyway keep on making your videos, but I would correct this one to make it 100%.
You are saving my life 😭😭 thank you
I did everything listed, and I came out with only 73%. I have the latest version, and that's never happened before. This one was tricky.
Hi
If you still face the problem, please feel free to contact our team.
Thanks for your great support.
mine ended with 49% :'(
I got 73% but only because our engineer asked to not do IPv6
It seems some of these packet tracers are bugged to come degree, kind of weird considering the IPv6 addresses are set correctly but still come up incorrect it’s odd.
Please update the packet tracer software with the new version. Most of the problems may resolved.
Hi! It's me again! Thank you so much man!
Welcome!
Love your videos! They help so much alongside my Cisco studies
Glad you like them!
got to 93% completion and am stuck. Wish you finished the video.
How did you finish it I can’t get it
Dzięki mordo pomogłeś mi z zawodowymi na infie.
Greetings for you man, you saved my ass!
Cieszę się, że ci to pomogło!
thankyou for your help, you are the lifeline for me, thankyou
You are so welcome!
I have a query about something at 13:04 min of the video specifically the information that goes into the table for RTA 0/0 and 0/1 the information that goes into the third column of the table directly below ip address. I am unsure from where
2001:DB8:CAFE:1::1/64
2001:DB8:CAFE:2::1/64
FEB80:1
where this information comes from? Is it from the CLI on the router?
WARNING: for all those who watch this video it is NOT 100%.
I like your videos a lot! unfortunately I would have liked to know from the beginning that It was not 100%, I lost a lot of time and I had to start from the beginning :c
Great point!
Got 97% with this at around 30 mins in, this video saved me😭 thanks!!!
Glad it helped!
Appreciated your assistance❤
thank u so much. this saved my ass. very nicely explained.
where did you get the LAN number from when u did the description 25:00 , ive gone through everything and the instructions and the cisco packet activites
All the instructions given in the activity itself!
You can contact us any time for assistance.
Thank you for these videos. It has been a great help.
Glad you like them!
Awesome video. The activity was trying to be clever varying the requirements, but I managed to get 93%. I couldn't understand why the GigabitEthernets didn't like my IPv6 adresses on the router. My VLAN didn't like the IPv4 address. Regardless, everything pinged with one another. The missing 7% really bothered me, like where else am I supposed to get the "right" IP addresses?
yeah the same happened with me, it only works with the college router on a different activity when you reset that one.
I like the way you explain, thanks
So nice of you
And thanks for your great support and sharing my dear friend...!!
And you can contact us, if you get any trouble.
at 35:30, you cycled through several things you previously typed in CLI without actually typing any of them. How did you do that?
how did you get 172.14.10.254 for the asw switch?????
Hello, I have just found your videos! This one is a total lifesaver! Is there anyway to post how to correct the mistakes that were left uncorrected. My score is up to 91 %. The vlan 1 ip add and G 0/0 IP ADD and G 0/1 IP ADD are not correct. As well as a local link. Any help with that? Thank you so much for your time and patience in going step by step with this!
Hi dear Friend.
Just contact us using our website. So that we will help you soon....
I have a question, this has happened to me a couple of times trying to finish this PT. I clicked G0/0 by mistake and the cable disconnected. When I try to connect it back, G0/0 and the little red triangle disappeared. I can't undo what I did and I don't know how to get it back on there. Please help!
This is the most difficult and confusing lab yet. I got an entirely different set of numbers and it was really difficult to follow because of that. I did my best to do what you did but I just don't think I have enough understanding to make it out, unfortunately. I got stuck around 75%. You are just throwing out IP addresses left and right and changing them on the fly and I don't know how. If I have any other questions I'll just use the website I guess.
i have the same issue right now. I started with a completely different set of numbers as well, made it very difficult to follow, and I have more "incorrect" items in the list than his shows. My IPv4 ping keeps timing out, so something isn't right.
I know this is so much a year late but what I try to do is download a packet tracer reset the activity a few times until your activity matches his. This may take five to six resets or possibly more to do it.
Thxx for the vid the only thing that did not work were the ip addresses I had 93% in the end so I am happy with it thxx :))
you're such a homie bro
Glad it helped!
Good video, but you didnt finish it. Also i notice when people ask questions, you direct them to your website. Please try to finish videos, and help people without sending them away from youtube.
Thanks for the tip
And we will.
to those that need help. Reset activity until the ipv6 for each lan is set to 2001...A and B instead of Cafe or acad. This is because the lab was not made correctly for the other two ipv6 topologies.
The ip for the vlan must be 15 in last octet to score 100%
Thank me later.
@@sinopulence Thank you. The vlan is the one thing that was holding me up. Appreciate you sharing this!
@@sinopulence 2 years later and you helped me get from 97% to 100%. I had my last octet set to 35. Changed it to 15 and boom, 100%! Thank you!
@@eddiehurtado5449 :) Congrats :)
Why do you use Fe801 for the link local address ?, and where did you get that from
on 12:42
It is called Link-Local address which same like private IP Address in IPv4. And FE80 is its starting Range.
Back again with another great video thanks 👍🤯
Thank you so much my dear Friend for your great support...
@@TechAcad 🙏
Thank you for the video it helped.
Thank you so much my dear Friend for your great support...
I can't seem to get past 34%. I completed the steps at 19:16 and forward but cannot get to 40% like you have at 21:06??? I deleted and reinstalled the Packet Tracer program, and will try again in an hour!
Let me know what the potential problem could be, please!
Hi
You can contact our team, so that we can help you.
any luck? i have the same problem!
@@blackman1467 i have not gone back to the assignment yet unfortunately. i still have till the 12th at midnight so im probably gonna procrastinate it a bit tbh lol.
At 24.52 where you are have "description of the LAN" where did you get 172.16.5.0? I have gone back several times to review and I can't figure out where you got that IP address from. Can you please assist?
lol life saver. thank you!
Thank you so much my dear Friend for your great support...
Thank you so much for this, just one question...where did you get the IP address FE80:1 from? Thanks again for the great videos!
It is Link Local IPv6 Address! Please check the range of this Link Local Address!
@@TechAcad That's right (with two colons, by the way), and that's for G0/0; for G0/1 it's FE80::2!
@@davidpotvin4983 nice
Great video. Are you doing 11s, 12s and more packet tracer too? like, 11.10.1,12,91 and 13.3.1. that would be awesome. thx
If you have done more of packet tracer, can you please send me to newyork2022@yahoo.com. thank you
yes, its in progress and once it is ready we will let you know.
Thank you so much for your great support...
I completed activity to 100%. I had to correct errors in the default gateway for User-3 and User-4. Then I put the correct ip address and subnet mask for ASw-2 after interface vlan 1.
thank you that was good
I have reached 97%
but i don't know how to get how to get 100%
the platform shows that my vlan 1 ip address is wrong even i tried to make the ip address ends with 1 / 254 it didn't work
any solutions ?
Hi
You just contact us using our Website. So that you can share your Packet Tracer File. We will Troubleshoot it...
Thank you so much for your great support my dear Friend...
burh how did you get to 97% im stuck on 34 and ive done everything!
Did you ever get to 100%? . . . I am stuck on that now and I've tried everything myself.
i got a 100% thank you i need help how to do it all in 1 go and how to find stuff. the lessions go back and forth and it was confusing me but you just about simplify everything
Glad it was helpful
great for tutorial PTA exam
Glad you think so!
And thanks for your great support and sharing my dear Friend. ..
I got stuck at 24:38, when I go to CLI to document the interfaces, it says "warning, User access verification" then it wants the password, but when I try to enter it, it does not appear and won't be enteted
It doesnt show the typing for the password. If you enter cisco/class for whichever you do then hit enter it should let you in still.
how to get 100% completion?
I have a doubt in 25:00 from where did you add the lan address
same, like i dont see that number anywhere
What would you say are the advantages & disadvantages of Basic device configuration?
How did you know/find the IP address of USER-04? because that's my only mistake Thank youu
Me too
Do you have videos for the other two possible topologies that can happen with this packet tracer activity?
This is the one activity, we have. And mostly the configurations may be the same with minor changes!
Thanks for your great support and sharing my dear friend!
I tried to get the ipv4 for the non-accessible switch for almost an hour now, then looked this up and it seems you don't. It does not seem to be a requirement in the assessment items. -_-
Hi sir
Whenever I try to open cli or terminal in it . I got only blank page. And it is not working I need your help in it. Please guide me sir what should I do know to make terminal running
You should install the latest version of Packet tracer!
version 8.0.1
And still you are in trouble, please feel free to contact us!
vlan ip was .15 for mine
Ahh worked for me too! Do you know the reason for this by any chance?... Anyone??
.35 for me. I reached 95%
Thank you for your help
Always welcome
Where did you get the LAN number from?
Hi
All the instructions given in the activity file!
Thank you so much for your great support and sharing my dear friend!
I have another issue at 19:10 of the video. When I keep entering this command it keeps returning the same message . It seems to be the same command as on the video.
RTA(config)#interface gigabitEthernet
% Incomplete command.
i added a space between interface and gigabitEthernet on the CLI though it doesn't appear that way in the chat.
Make sure that you give the interface id also!
How did you get the IPv4 address for the RTA to not overlap? Mine keeps saying my addresses are overlapping and I'm not sure what to do lol
Hi
When we assign IP address to interfaces to in the same router, they must be from different networks.
thank you for this. but the ip address for vlan 1 is still wrong. any solution?
Can you share the file..
We will look into it and help you...
Just visit our website to contact us....
How do you type in default gateway?
24:46
Thank you very much!
You're welcome!
Where to download this pka?
Anyone know how to get that FE80::1 ? at min 12:38
It is called Link-Local Address!
i have one question in ports my fast ethernet 0 is incorrect i mean the ip address is showing wrong , what should i do?
You can contact us for the support!
And thanks for your great support and sharing my dear friend!
how do you get subent mask
is this the config fixed version?
These are Packet Tracer Activity files!
In 28:00 what’s the command ??
Actually I put a question mark to check the next command.
The command is: ip default-gateway 172.14.10.1
Thank you!
This one is REALLY disorganized I am sorry to say. An 81????!!!! Usually they are pretty good.
Thanks for your message and support!
Привет, кто с ФИТа
I love these videos so much
Thank you so much my dear Friend for your great support...
22:12 for my personal use lol
how did he ge FE80::1
Thanks Mate!
You're welcome!
Pls reply as soon as possible
What's ur web site
Details given in the description
how did you get the table in excel
That just we created!
how to unlocked router dude. still unlocked
You can access the switch either using console or Telnet...
After doing all the configuration I'm stuck with 55%. This are all the commands I've used
College Router
enable
config terminal
hostname College
enable secret class
line console 0
password cisco
login
line vty 0 15
password cisco
login
exit
service password-encryption
banner motd #Unauthorized access to this device is prohibited!#
interface g0/0
ip address 128.107.20.1 255.255.255.0
ipv6 address 2001:db8:a::1/64
ipv6 address FE80::1 link-local
description Link to Class-A
no shutdown
interface g0/1
ip address 128.107.30.1 255.255.255.0
ipv6 address 2001:db8:b::1/64
ipv6 address FE80::1 link-local
description Link to Class-B
no shutdown
exit
ipv6 unicast-routing
end
copy running-config startup-config
Class-B Switch
enable
configure terminal
hostname Class-B
banner motd #Unauthorized access to this device is prohibited!#
enable secret class
line console 0
password cisco
login
line vty 0 4
password cisco
login
exit
service password-encryption
interface vlan 1
description Vlan 1
ip address 128.107.30.15 255.255.255.0
no shutdown
end
copy running-config startup-config
why 1/24 instead of 0/24?
We specified the Network Address.
where’s your 100 percent
BEWARE. IP address always changes :(
Thanks for commenting this, I was legit wondering if I downloaded the wrong file. I found that you can reset the activity multiple times until you get the one done in the video.
@@irvenman Thank you so much for the tip!
Sloppy af 😂 must be in cahoots with the teachers 😂
you´re machine
Thank you so much for your great support my dear Friend...
bad mask 24
I have sent an Email please help!
Sure! I will check and message you soon! Thanks for your great support and sharing my dear friend!
nice one bro hahaha
Thank you so much my dear Friend for your great support...
Incomplete
We mostly completed!
Help me plsss
Please contact our team using our website, we will help you
Thank you
♥️
Thank you so much my dear Friend for your great support...