This was really helpful! I am taking a cisco networking class for the first time, and the way you break everything down and don't skip steps is excellent. You're a great teacher!
I wanted to reach out 3 years later to say I completed my intro to network instructor accreditation. This video helped me get there when I was getting started!
As a professional IT instructor i confirm that this video material is pure class and the explanation from the author is outstanding. Thank you for your help.You are educating people.
Thank you for making these videos and taking time to help 🙏🏼 The whole thing was confusing but you thoroughly explained and even wrote down what to do and everything.
Honestly I had no subscribed but now I did after this video because all of my schooling I’ve been helped so much by your video, I like that you explain everything so well, I really appreciate your channel
Thanks, had a lot of trouble with this particular assignment, and this was very helpful. I'll keep your channel in mind if I ever have any more trouble!
Hey getting great help with learning doing these sessions but i noticed that your G0/= interface ip address 192.168.0.1 is the same as LAN-A Switch 192.168.0.1. i assume as the assigment said for switch a.2 ''Use the second host address for the LAN-A switch.'' that it is just a typo as i would assume it should be 0.1 for G0/0 (customerRouter) and 0.2 for LAN-A Switch
Excellent video! I just spotted a small error. Question 2 says to use the second host address for Switch A but, in the spreadsheet, you listed the Switch A address as 192.168.0.1 (the same address as CustomerRouter.)
thank you so much , i was going crazy because i was getting an error message everytime i tried to configure the PCs ip adresses , thanks to you i finished it!
you are the best man the information that you give with the subnets and host and stuff is so helpfull thank you a lot i am going to subscribe for sure !!!
I already found the answer. The config is right on Lan B-Switch vlan1 the ip address is 2nd usable ip address. The Lan A-Switch is wrong ip address you used 1st usable ip address on Vlan 1 which should be the right ip address is the 2nd usable ip address.
thank you for this ....now one question, on the default gateway addressing in the ip configutation , what if you left it as 0.0.0.0 ? would it still work????
I am confused on the # of subnets, the table my professor provided us with on the PowerPoint shows the same prefix, subnet mask, network address, and # of host. But not the same # of subnets as this video says. For prefix /25 the table shows 512 # of subnets. Does someone know which one I should go off of?
Part 1 Step 2 b, 2) instruction says: 2nd host address to LAN-B switch. 1st was 0.65 for 2nd network so 0.66 being 2nd host address goes to switch. I am sure you figured that by now. :)
Hi, Is there a personal email I can contact you on? I need help with an assignment (need to email or Direct message it to you) and was wondering if you could make a video on it Thank you.
This was really helpful! I am taking a cisco networking class for the first time, and the way you break everything down and don't skip steps is excellent. You're a great teacher!
Glad it was helpful!
And thanks for your great support and sharing my dear friend....
If you need any support, you can contact our team.
I'm in CCNA1 right now, so this is marvelous.
I wanted to reach out 3 years later to say I completed my intro to network instructor accreditation.
This video helped me get there when I was getting started!
Are you still in this career path? Have you graduated? How’s finding jobs?
I can't thank you enough for doing these videos.
Glad you like them!
Are you still in this career path? Have you graduated? How’s finding jobs?
As a professional IT instructor i confirm that this video material is pure class and the explanation from the author is outstanding.
Thank you for your help.You are educating people.
Wow, thank you!
I just want to say thank you so much I was struggling with module 11 you really break down everything to understand
This really helped me make the connection between creating subnets and assigning them to an actual network.
Thank you for making these videos and taking time to help 🙏🏼 The whole thing was confusing but you thoroughly explained and even wrote down what to do and everything.
Glad it was helpful!
Honestly I had no subscribed but now I did after this video because all of my schooling I’ve been helped so much by your video, I like that you explain everything so well, I really appreciate your channel
I'm so glad!
You are one of the most underrated TH-camrs dude! Keep up with the great content!
Thanks, will do!
Thank you! I've been struggling with this all day. :) This video saved me.
I'm so glad!
Are you still in this career path? Have you graduated? How’s finding jobs?
I couldn't thank you more, you are a really fantastic instructor.
Wow, thank you!
Thanks, had a lot of trouble with this particular assignment, and this was very helpful. I'll keep your channel in mind if I ever have any more trouble!
Glad you like it!
Are you still in this career path? Have you graduated? How’s finding jobs?
@@luckycomments no lmao i'm fucked bro, get out while you can
@@mjdxp5688 lmao. You lyin. Why you say so? Did you complete your years? What happened?
@@luckycomments reality set in
change to psychology
I truly appreciate your channel which helps me a lot to learn about switch and router configuration. Bless you
Happy to hear that!
Still a great source of info today! I was having trouble till I found this video. Thank for your help
Glad it helped!
Thank you very much for your help, you are a very good teacher. Greetings from Spain.
Glad it was helpful!
my teachers such a g he doesent make us fill out those time consuming tables. LOVE THE VIDEOS BTW very helpful
Glad you like them!
Hey getting great help with learning doing these sessions but i noticed that your G0/= interface ip address 192.168.0.1 is the same as LAN-A Switch 192.168.0.1. i assume as the assigment said for switch a.2 ''Use the second host address for the LAN-A switch.'' that it is just a typo as i would assume it should be 0.1 for G0/0 (customerRouter) and 0.2 for LAN-A Switch
Noted!
I notice that as well comment helped me realize I wasn't going crazy
later he corrected in 38:55
Excellent video! I just spotted a small error. Question 2 says to use the second host address for Switch A but, in the spreadsheet, you listed the Switch A address as 192.168.0.1 (the same address as CustomerRouter.)
Ok, thank you for the correction. And all viewers are requested to note the same.
And also thanks for your great support and sharing my dear friend...
He picked that error and corrected at 39:08 time line :)
so the ansser for that will be 192.168.0.2 right?
please help me out,, im tryna to pass my test
@@raymondting6614 Yes, the correct address for that switch would have been 192.168.0.2.
@Cody F thank you so muchh
This assignment packet tracer is alright, but I’m not great with Excel which is addressing table, but I’m glad this helps. Thank you Tech Acad!
Glad it was helpful!
this is super helpful - i just wish you'd type in the answer so there's no confusion or misunderstandings of an answer- very helpful though
Thank you so much for walking through this. you saved my homework.
Glad it helped!
thank you so much , i was going crazy because i was getting an error message everytime i tried to configure the PCs ip adresses , thanks to you i finished it!
Glad I could help
16:46 can you show me where the link for that video is, I cannot find, thanks.
You are the best, thanks so much for your service to this community
You're the best!
I'm confised where you got the other 3 subnet addresses for the table at 25:00
Yup. I was like bro wtf
Thank you! absolutely fantastic walk through of the packet tracer lab!
Thank you so much my dear Friend for your great support...
Are you still in this career path? Have you graduated? How’s finding jobs?
From 24:00 to 25:38, I dont understand how you got those answers could you explain?
same
Thank you very much for making this so easy.
Glad it was helpful!
Absolutely concise information, thank you🙏
Glad you enjoyed it!
you are the best man the information that you give with the subnets and host and stuff is so helpfull thank you a lot i am going to subscribe for sure !!!
Glad it was helpful. And thanks for your great support and sharing!
Thanks man I just subscribed I appreciate the walkthrough :)
Thanks for the sub!
And thank you so much for your great support and sharing our channel with your friends...!
Question. Why did you assign 192.168.0.66, instead of 192.168.0.65? when the first usable is 65 instead of 66? this is on VLAN1 Lan B-Switch. Thanks!
I already found the answer. The config is right on Lan B-Switch vlan1 the ip address is 2nd usable ip address. The Lan A-Switch is wrong ip address you used 1st usable ip address on Vlan 1 which should be the right ip address is the 2nd usable ip address.
Thanks sir really appreciate your hard work
It's my pleasuret
And thanks for your great support and sharing my dear Friend...
you teach better than my prof
Thank you so much that was very helpful! Helped me solve the pka!
Glad it helped!
Thank you so much Tech Acad for the great tutorial.
Glad it was helpful!
Thank you for the great lesson ❤️💯
Glad you liked it!
Thank you, this was great - I learned something 👍
thank you!!! This was the only thing I can think right now
Glad you like it!
This helps me alot. But can you teach on how to create the topology design? I appreciate all helps here:)
Sure thing!
thank you for this ....now one question, on the default gateway addressing in the ip configutation , what if you left it as 0.0.0.0 ? would it still work????
It will work only locally. It will not communicate with the remote network!
just wanted to know, if pc can have same ip address as switch or not?
No, we should give unique IP Address for each device!
absolute life-saver. you sir, have my absolute thanks
Glad it helped!
I am confused on the # of subnets, the table my professor provided us with on the PowerPoint shows the same prefix, subnet mask, network address, and # of host. But not the same # of subnets as this video says. For prefix /25 the table shows 512 # of subnets. Does someone know which one I should go off of?
thank you so much for helping out with this, very valuable information! :)
Glad it was helpful!
Thank you! The video is very helpful and interesting!
Glad it was helpful!
Hey Tech Acad! What do you do if the CustomerRouter logs off?
Hello, I have a question here, how to make sure that you have 50 hosts so that the other 12 do not stand idle
While subnetting, we cannot assure all the IP Address can be utilized. There will be some additional IP, if not using all!
@@TechAcad thank you so much
Excellent, thanks for sharing.😎
Thank you so much for your great support and sharing my dear friend!
Excelentes video, muchas gracias!
Sir can you please post the video how to make connections .
Sure,
And thank you so much for your great support and sharing my dear friend....!!
i couldnt fix the password at the end...awesome
Glad I could help!
when typing the password it will not show up as you having typed anything but it will still be there
@@slimeking101 I’m well aware
I couldn't thank you more, you are awesome!
You rock!
hello sir could you please mention the router modle you used in packet tracer
Brother how did you convert the tabel from the excercise into excell i have been struggling
Absolutely saved me, thank you so much :)
Glad it helped!
You are a life saver thank you very much.
Thank you so much my dear Friend for your great support...
Thank you so much. Your videos are really helpful.
Glad you like them!
How to configure ipv4 and ipv6 address into a pc? Please can someone helpppp
did u ever figure it out
Thank you so much from Japan!!
You're welcome!
thank you! im noob so this really helpful
Glad to hear it!
Simply Awesome. Thank You!
Glad you liked it!
Thank you very much ❤️ ❤️
You're welcome 😊
40:25 press control what?
Ctrl+z
Thank you. really helpful.
Glad it was helpful!
Fantastic ! Thank you very much ! This clarified a lot !
Glad it was helpful!
Am I missing how we know which device to use as our LAN, as they aren't labeled as such?
Very good tutorial
Glad you liked it
thank you ,you helped me a lot
Glad I could help!
Can we get the excel file with the tables in it? or not
Where can I download this activity?
This saved my ass thanks very much friend
Ma itu pake switch untuk LAN model apa?
BOW before the Indian >W< fr tho really helpful
Glad it helped!
Thank you bro 😁💪
Welcome 👍
Gracias por el video bro me sirvió mucho
where do i get the pkt file for that 11.5.5?
You can contact us!
THANK YOU SO MUCH, BROTHER!
You're welcome!
Thank you very much you help my exercise
Happy to hear that!
Thank you so much ,sir.
So nice of you
Why is LAN-B switch 192.168.0.66, if the default gateway is 192.168.0.65
Part 1 Step 2 b, 2) instruction says: 2nd host address to LAN-B switch. 1st was 0.65 for 2nd network so 0.66 being 2nd host address goes to switch. I am sure you figured that by now. :)
@@atit3838 yes. Thank you :)
Amazing stuff, Thank you!
Glad you enjoyed it!
Thank you for the video!
Glad it was helpful!
Truly you are really helpful!!!!
I'm so glad!
saving my life thank you
Glad it helped!
Your the best!!!
And thank you so much for your great support and sharing our channel with your friends...!
very good video!
Glad you liked it!
cant we just use 192.168.0.1 then 192.168.0.2 and so on for the subnet addresses?
Hi
For different subnet, we have to make changes in the network portion.
You are a 🌟 🌟 🌟 🌟 🌟 🌟 🌟 🌟 🌟 🌟 🌟
many many thanks TECH
Many many thanks
Hi, Is there a personal email I can contact you on?
I need help with an assignment (need to email or Direct message it to you) and was wondering if you could make a video on it
Thank you.
All the details will get from the videos descriptions!
@@TechAcad Hi, I have sent a message on WhatsApp. Hope to hear soon. Thank you
Thank you so very much
You are so welcome
There is a mistake with the first switch IP address, you used the same for the router.
Thank you, noted!
Thank you!!! Helped a lot!
Glad it helped!
this packet tracer lab is giving me a headache
Need to practice more on Subnet!
very nice
So nice
does anyone have the completed packet tracer file
So helpful! Thanks!
Glad it was helpful!
Hey i have issue i am unable to change pass it asking me password and i am unable to write anything please help
Passwords are invisible when you type it. Just type correctly and press enter!
@@TechAcad ohhhh thank you
Thank you my dude
Any time
you saved me. thanks.
Glad I could help!