How to Install Cheap Parking Sensors * Easy Car Mods*
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Installing Parking Sensors onto my Vauxhall Astra SXI
Parking sensors: rover.ebay.com...
There’s an update at the end of the video! *
Be sure to smash the like button and join the movement by subscribing! Also, be sure to hit the notification bell icon to stay up to date with my content.
Hope you all enjoy this video! :)
Find me on:
Snapchat: OfficialBigHus
Twitter: / officialbighus
Facebook: / big-hus-2725. .
Instagram: / officialbig. .
Google+: plus.google.co....
Business Inquiries: OfficialBigHus@gmail.com
#parkingsensors #Vauxhallastramods #Cheapparkingsensors
Beautiful fitted n shown the test too 😎
Sajid Hussain Thanks bro❤️
guy's explained it better than some other fellas out there... thanks for doing this video
I fitted mine today(same as your setup) I would suggest fitting them lower below the reg plate, due to some small fence/walls. Great video easy to follow.
I’m glad that my video has came useful for you. I understand where you are coming from. Thanks for the compliment 👍😃
This is great. I have a zafira A and exactly the same system as yours mate. I'm not the greatest when it comes to following guidelines but you've boosted my confidence a lot. Thanks buddy.
If I can do it Buddy, Anyone can! Give it a shot. All the best :D
Top man helped me a lot with sorting one out for my van. Thanks brother
Important. For H model it is the red wire to connect to the white wire with black stripe for reverse light. The white only wire is for the sidelights.
Hi.
Where does the black 0V wire go from the parking sensor unit? The video shows him connect it to "power" wire but that can't be right, can it? From my understanding the red wire connecting to the reverse white wire is providing the 12V so black wire should be for neutral/ground.
Very clear instructions.
Giving hope to non technical person like me.
Nice video.
How to find which one is A,B,C,D sensor.
I just bought today from ebay.
I can see its written on a box. But nothing is mention on sensors.
I will install ist time in my life.
Your guidance would be very helpful.
Thanks
Doesn't matter. All the sensors are same.
Just ordered same setup for my Saab, 100% will use the video
during assembly ^^
Good luck with your Installation! Thanks 👍🏽
Gonna do this tomorrow sensors been in for 3 weeks . thanks bro great video....
Great content brother. So many other youtubers are trash, this was great.
When having that many wires should keep track of which one goes to which sensor by 1 2 3 4
Also want to know this 👍
I would complete a test electrical connection before doing any bumper drilling. Might have gotten a defective unit.
Good job👍🏻👍🏻👍🏻
So you connected red wire to the reverse light wire?
Black and white wire for astra. Lol I learnt how to do watching your video. And I just did a astra and cut the wire going on your vid. But it was the black and white Wire for reverse.
Love the gta 4 track , will this work on any car ?
My rear parking sensors suddenly stopped working. The front works just fine. What could be the problem and how do I go about checking this? Can't afford to go to the garage 😢 The car is a Vauxhall 2009
Masha Allah. It was a clear video, you explained it quite well. However I am not gonna attempt this.
thanks for clear instructions brother . how do you do the front? wirring wise? a bit stuck
Ah thks...so what if I wanted to put one out of the four sensor to the front of the car?
Thanks fella, you have helped my understanding of fitting a lot.
My Pleasure mate :)
Does the black wire from the power go to a ground? You connected it to 'power' you said, is that 12v? I guess not if the reverse wire where you connected red wire to is the 12v?
Great video and very well explained well done 👍.... but just be gentle and let the drill do the work and no need to push to hard on the drill (only a suggestion not a criticism) but you did great - nice job my friend.
Matthew Throup Really Appreciate the honest feedback. Will take that on board for future. Thank you my friend. All the best.
Job done Big Hus. No problems,guessed the reverse wire colour first time,choice of 6. Mud flaps next
Well done Neil! Glad all went well. Thanks
I gor 2 white wires on mine so which one of them do i connect to?
Thanks for sharing I subscribed bro it looks easy but it ain’t I got a Volvo saloon. I got tints i need this and runs into black
Yes big hus :D video made my day brother lol thanks ( keep the driller chargers on deck lol)
Great video bud 👍
Thank you :)
The big Lexus LS430. Beautiful V8.
Great video, well done
Will it work without drilling? I just want to place sensors to the rear side of the trunk.
The sensors will work if wires are connected properly however, for this type of installation drilling is required.
It's there a chance to fix two in front and two in back?
I have a astra 07. Black great video. How do you connect the wires. Did you use a wire stripper and wind them together than use electrical tape ?
Your video it was already all taped up so I couldnt see how it was connected ?
Yes you would do that buddy, hope this helps! :)
Did you use a wire cutter bro ?
Does it matter where you wind them on the reverse and power wire ?
Yeah wire cutter, also, it does matter about winding the wires on reverse and power. Needs to be the correct ones to operate
@bighus how do u kmow wjat sensor goes where in the box abcd 1234 u failed to mention that help would be great
Great video mate, thanks for sharing 👍
Do you have idea how I can stop and start button installation in place of my egnition
Hi thanks a lot for the video, it's really helpful. I have an opel astra, and the parking kit comes with 8 sensors (4 front, 4 rear). And how do I know which is the wire for the ACC and GND in my case?
Thanks man! I needed this vid!
Hi brother how did you connect the wires together?
Nicely explained 👍👍
Great video, thanks man.
Watched this 3 times,going to try it tomorrow,if anything goes wrong it's your fault!Thanks for saying you're doing one on scratches,did that today and messed up, didn't let it dry enough. Will do the fitting mudflaps as well, thanks Big Hus
Awesome mate
Thank you for sharing bruv 👍any idea how much are they the one u bought if from Ebay please let me know
How did you measure out where to place each sensor mate
Bro can I use my android infotainment system instead of that small monitor?
Good video buddy.
that was a pretty good install
Hey I got some, mine don't say ABCD so which one goes where?
Tried this on my 56 plate astra hatchback but doesnt work. Ive tested the reversing sensors and that all work fine though
Strange🤔 mine is still working perfectly fine, must be faulty sensors mate
Good on ya mate, thank you
Helpful video -- thanks dude!
How can you check which wire is the power and reverse wire?
You can check by turning the ignition (not fully) and switch to reverse gear and connect (temporarily) on each wire until the monitor switches on and you start hearing beep sounds. Hope this helps
And how do i know which wire is the power wire? I need to connect black with the power wire.
Hard Loper You find that out by connecting it (temporary) to all the wires and once the parking sensors turns on then you know that is the power wire as the parking sensor will not turn on if connected to any other wires
Thank you for the video. Ill be honest I’m having issues. I put the red wire with the white and the black wire with the brown and all that happens is the sensor makes an audible bleep. Do you think I have a faulty device?
Yes you do.
I have a same problem
Not sure how to fix it
Brilliant just passed and plan to add reverse cams and sensors
Congratulations on passing your test. Hope this video has helped. I would advice looking into mirror dashcams which will reduce insurance price and come into good use
I'm ordering cheap eBay parking sensors after seeing this video
Glad you have benefitted from this video. Best purchase I have made. Still works perfectly to this day. Good luck 😃👍
@@BIGHUS I'll do video of install on my Mercedes W124 and let you know how it went
Fair enough n it adds value to the car
Nice work, Thanks !
My car is VW sharan MK2. Finding it hard to find the wires. Plz help.
U did it? I bought this sensor for my Sharan today and plan to install it this weekend 😊
All the best guys! :)
Killed it bro
Keep the car bro, nice vid. 👍
Nice cheap mod👍🏻
Salut.
Vezi că ai semne pe interior.
Date de fabrică .
Trebuie doar să dai bara jos.
great video . thx for the help buddy cheers
Ian rhodes No problem mate. Thanks 👍
Maa Shaa Allah
Nice one, thanks.
good video and thanks for sharing
Top lad
Handy as👍🏻🙏
Didnt get it with reverse wire.
yara can you do mines
very good.
Bro iv done this but I'm having difficulty trying to connect the power wire
Not sure where it goes and how to do it
Any tips?
Hey bro, to make things much easier, I switched my ignition on and left it in reverse gear and temporarily connected the power wire to each slot on the tail lamp light Wiring Harness until the parking sensors started to beep, that’s how you know which wire the power wire is meant to connect to. Hope this helps :)
@@BIGHUS JazakAllah ill have a go
Any new vids comin soon
@@BIGHUS So no earth conection? Brown wire to constant live and red to reverse power live- Correct?
@@doncharles9298 Did you find out? It seems instructions says 0v so assume ground is needed.
Class video, well done. Wish you could do mine lol
Same car as mine
I just don't like the monitor part...
Yeah its abit old fashioned but should be better ones now
If I were to put this on my vette lol
Nice
Doesn’t work for me
You Scottish mate?
Your very handsome
You're*