This device is correct and useful when the sensitivity of the front sensors is about 20 cm, otherwise, in heavy traffic, the sound of the device will disturb the passengers of the car, because the distance from the cars in front is about 50 cm in traffic, but when parking that the front bumper of the car may rub against an obstacle.
Hi, I got mine on Amazon for back sensors and it looks very similar to the one you reviewed in this video. And I hope it will work great because it does require drilling in the back. 🙏🙏
Tis video answered all the questions that have except one. What is the maximum distance that it picks up? I do not want to sit at a red light with a vehicle 3 to 4 feet infront of me with this going off?
It all makes sense apart from connecting the front sensors, Surely if I connect the fronts to my brake lights they will will work when I press the brake? As the brake lights aren't always on? Surely the front sensors need a constant power source to? Thanks
My thoughts exactly. I'm going to attach the power of the front ones to my rear lights. That way, when I park if I turn my lights on the sensors will work and when I turn my lights off the sensors will be switched off. It seems dumb to me to only have the front sensors working when I put my foot on the brake. Driving at night with my lights on wont effect the sensors as long as I am not driving into another vehicle, or a wall lol.
We have multiple options when it comes to Parking sensors. Please visit this link for the list of systems. www.tadibrothers.com/category/parking-sensors
Would installing rear parking sensors overload the reverse circuit, considering that some vehicles already have a backup camera or an aftermarket camera installed?
Thanks a lot for your installation guide. Actually, I have a small question.. Can I connect the yellow cable to a direct 12V not link it with the brake? In order to enable the sensors detection all of the times not only while press brake..
The front switch should not be connected to the brake lights. I’m thinking of having the installer connect it to a dash mounted toggle switch. Most modern cars have the front sensors activate on their own (which I have had in the past) or activated by a toggle switch which my bmw has and is what I prefer.
Hi Tadibrothers I have som questions please you said white connects to reverse so which one the + or - ??? And also the yellow please i Hope i will get the answer and wish you s happy Christmas
Can I use your kit with OEM back up sensors? I have an F150, with a rear bumper that already has the sensors installed, but the truck doesn't have the back up sensor system. Looking to use the OEM sensors but with an aftermarket system.
My front sensors wont work all the time. May be something to do with electric regenerative power, it won't give 12v to brake light. When I put reverse gear and immediately drive mode it works otherwise it wont work even front is a car. It is just hit and go. I am thinking connect white wire to red wire so that it gets 12v all the time and senses distance whenever something come front. Display will be on all the time, my guess. Any suggestions please?
Hi, Here you go… Parking Backup Sensor System with Sound and Volume Control SKU2830325 www.tadibrothers.com/category/parking-backup-sensors You can get it here or call us at 866-966-5550 Merry Christmas 🎄
All of our sensor systems come pre-configured with the rear sensors. However, if you use the customized button on the website, you can upgrade any system to front and rear. That is also where you can choose the color and type of sensor that you want.
I'm wondering: if you put 2/4 sensors at the rear activated by the reverse, how could you activate 2/4 sensors installed on the front ? Obviously not with the brake or reversing light? It perhaps needs to be incorporated into the gear shift ?
because you control the distance to anything in front of you you just don't get right up on anyone's butthole and you won't trigger the sensor. in traffic someone might pull up right on your butthole though and you only want the rear sensors on when you are in reverse!
Can this be used as proximity/driving sensors to improve safety, by having all 8 sensors ON and connecting it to a switch to trigger (turn on/off) manually. How would one wire this.
Connect white, yellow, red to always on after ignition key on like radio +ve source , then install a ON / OFF swich on black wirev(or red also supposed work)
Yes as per the defined procedure. However 1) you can connect white to acc +ve and put a switch on white cablle and make it on prior to requirment (but we may forget to on it when it is needed or 2) we can keep it always on , we have to maintain a large distance in the front to avoid beeping 3) In case it is connected to brake as designed , it will be helpful in front accurate parking but it is not going to alert of front obstacle prior to braking unlike in reverse ( which may not be needed as front visibility is good ) However there is a scope for improvement.
The module or "brain" of the system receives a constant power supply, with trigger wires connected to your reverse light. This setup allows the sensors to activate when a nearby object is detected and enhances the detection range when the reverse light is engaged.
I have the same question. The sensors in the front of the car must be activated at a speed below 10 km/h, in the state in which we want to park, and in some cars there is a port called the canbus to which this radar is connected, and according to the speed The car will be activated, and the range of the front sensors should be low and they should beep only when we reach 10 cm of the obstacle.
Quick question i have a kenwood radio that have the parking assist included option but i wanna get rid off the monitor you guys sell to replace the 4 pin wire to 4 pin to dual av male and av female so that i can use the monitor port to connect to my camera and the sensor then send all the signal to the radio is that possible??
if u connect yellow wire to brake switch every time you hit the brake pedal gonna hear a beep from module. is this normal or there another way to connect yellow wire?
The video shows the first 4 sensors connections are for the front but the PDF you sent me after purchase says the first 4 sensors are for the rear. Which is it?
Scusami o acquistato dei sensori x la yuke, ne devo montare 8, anteriori e posteriori..il vero problema mi nasce sl cablaggio,qui mi nasce un problema come collegarli.. Qui abbiamo 8sensori,. Nooo 4, i quattro sono semplice..Rosso e nero che ndava al bianco e nero della retro.. ADS abbiamo io 4 fili, non solo alla 12 volt! Grazie
front sensor is only suitable for automatic transmission vehicles? as it uses brake light to activate... manual transmission dont need to use breaks when front parking...
so the red wire goes to the positive wire of the back light and the black wire goes to the ground or the chassis of the car, can i also connect it to the negative wire of the back light instead of the ground?
Can the length of wires be cut to exact installation length or must the wires remain full length as not to alter the sensors performance? Does the length of wire affect the sensor's performance?
Sorry to hear that, there might be something in the wiring, please call our service department any time at 866-966-5550 and once they pull up your order, they will be able to troubleshoot it with you over the phone. Also, do you have a one year warranty on the product so if there are any technical issues, we will gladly swap it out for free.
If you purchased the sensor system from TadiBrothers, the button should be on the top of the display near the round speaker holes. if you still cant find it, call our tech department and they will do their best to assist you at 866-966-5550. Make sure to have your order ID or email so they can find your order and see exactly which model you purchased.
Yes, this sensor system was designed to fit most vehicles from a ford focus to a FedEx truck, if you need extensions we have those as well www.tadibrothers.com/products/sensor-extension-cable-10ft
how you get 12v from/(for) brake light? for front parking sensor i tried to connect it on each of the wires (one was green and one was white with black stripe) and it didnt work..what should i do? (btw i have a toyota prius 2007)
Is there not just one main RED wire that powers all the sensors? And then obviously black is the ground and then the other wires are for triggering them at certain points?
Hello, I want that the front sensors activate when I put in reverse so not when i press the brake. Because if the front sensors will activate everytime i press the brake it will be annoying especially when you are in heavy traffic. And how does it do in bad weather?
I have the same question. The sensors in the front of the car must be activated at a speed below 10 km/h, in the state in which we want to park, and in some cars there is a port called the Canbox to which this radar is connected, and according to the speed The car will be activated, and the range of the front sensors should be low and they should beep only when we reach ten centimeters of the obstacle.
Hello, we have a large assortment of colors feel free to call us to verify that we have (866) 966-5550. Also, feel free to paint the sensors, it will NOT affect the quality of the sensor or void the warranty.
I rather install 2 units of 4 secors not 8 . one for the rear ,connect them through reverse lights ,and for the front i connect through a switch ,so i can put them on when i need to.
We have a version that only has sound, SKU2830325 on the TadiBrothers website www.tadibrothers.com/products/parking-backup-sensor-system-with-sound-and-volume-control-tb-s058s However, the sound on the display system in the video is a little bit crisper and what some people do is either cover the screen with electric tape or just bury the display under the seat or dash. I hope this helped :-)
FUNNY COMMENT AT THE END OF IT. L.M.A.C.O. LOL Back up system and or side warning system. All Voice, no beeping? Voice tells the driver how many feet, inches away that the vehicle is from your vehicle. Drivers side approaching vehicle / passenger side approaching vehicle with beep as the vehicle gets closer , 1 foot continuous beep. Sounds like a great idea huh?? Some dumb people drive without lights on at night , sad but true!! This isn't 2010 anymore, we want cool ways of knowing, vibration mini motors in the seats, one on one left cheek and the other one on the right cheek of our ass cheeks in case the radio is too loud you can feel the vehicle getting closer!! LOL
This is the best clear video I even seen about the wires connection, well done
Thank you for the kind words, we appreciate the feedback
I agree, very nice and clear instructions.
على قناتي في فيدو اذا بتحب اتشوفو
EXCELENT JOB. VERY CLEAR EXPLANATION ,ANYBODY WHO FOLLOWS THIS CAN FIT PERFECTLY.
Thank you very much!
This device is correct and useful when the sensitivity of the front sensors is about 20 cm, otherwise, in heavy traffic, the sound of the device will disturb the passengers of the car, because the distance from the cars in front is about 50 cm in traffic, but when parking that the front bumper of the car may rub against an obstacle.
don't park so close.
@@attiylanen of course
Hi, I got mine on Amazon for back sensors and it looks very similar to the one you reviewed in this video. And I hope it will work great because it does require drilling in the back. 🙏🙏
Many thanks mate for your video and your help!!!
Thanks dear ...It was very nice and easy explain from your side.....So Thankfullll
Hey, good job there, can you tell me how to replace one of those sensors
Check the video that you have a contradiction between the yellow wire and the white wire. yellow is reverse and white is brake
Tis video answered all the questions that have except one. What is the maximum distance that it picks up? I do not want to sit at a red light with a vehicle 3 to 4 feet infront of me with this going off?
Wpuld installing this would breach warranty?
I think the white wire is for the break light. And the yellow one is for the reverse
Mine has it wired like this too
hmm... ok so this is not 100%. then I would just have to check after installing.
These are actually not bad
Thank you
Very clear Video. A1+++++
Glad it was helpful!
It all makes sense apart from connecting the front sensors,
Surely if I connect the fronts to my brake lights they will will work when I press the brake? As the brake lights aren't always on?
Surely the front sensors need a constant power source to? Thanks
My thoughts exactly. I'm going to attach the power of the front ones to my rear lights. That way, when I park if I turn my lights on the sensors will work and when I turn my lights off the sensors will be switched off. It seems dumb to me to only have the front sensors working when I put my foot on the brake. Driving at night with my lights on wont effect the sensors as long as I am not driving into another vehicle, or a wall lol.
This is what I was looking for
Unfortunately this product is not available on Amazon...
We have multiple options when it comes to Parking sensors. Please visit this link for the list of systems.
www.tadibrothers.com/category/parking-sensors
Would installing rear parking sensors overload the reverse circuit, considering that some vehicles already have a backup camera or an aftermarket camera installed?
Good explanation tanks
Amazing, thank you !
Our pleasure!
Thanks a lot for your installation guide. Actually, I have a small question..
Can I connect the yellow cable to a direct 12V not link it with the brake? In order to enable the sensors detection all of the times not only while press brake..
Can it be installed on an ML350 W166 with a backup camera?
The front switch should not be connected to the brake lights. I’m thinking of having the installer connect it to a dash mounted toggle switch. Most modern cars have the front sensors activate on their own (which I have had in the past) or activated by a toggle switch which my bmw has and is what I prefer.
Hi Tadibrothers I have som questions please you said white connects to reverse so which one the + or - ??? And also the yellow please i Hope i will get the answer and wish you s happy Christmas
Can I use your kit with OEM back up sensors? I have an F150, with a rear bumper that already has the sensors installed, but the truck doesn't have the back up sensor system. Looking to use the OEM sensors but with an aftermarket system.
Any chance you found an answer to this? I have the same thing going on.
Where to get the eight port connector to connect both front and rear sensors in india?
My front sensors wont work all the time. May be something to do with electric regenerative power, it won't give 12v to brake light. When I put reverse gear and immediately drive mode it works otherwise it wont work even front is a car. It is just hit and go.
I am thinking connect white wire to red wire so that it gets 12v all the time and senses distance whenever something come front. Display will be on all the time, my guess. Any suggestions please?
Are al the same size hole for this sensors?
Can the loud volume be decreased?
what is the part number to buy this kit?
Hi, Here you go…
Parking Backup Sensor System with Sound and Volume Control
SKU2830325
www.tadibrothers.com/category/parking-backup-sensors
You can get it here or call us at 866-966-5550
Merry Christmas 🎄
Is this part number the kit with rear and front sensor, total 8 sensors?
All of our sensor systems come pre-configured with the rear sensors. However, if you use the customized button on the website, you can upgrade any system to front and rear. That is also where you can choose the color and type of sensor that you want.
can i connect an car's stereo to the module instead of display or speaker to see the distance on the radio screen?
No, the system we give has everything you need. It cannot connect to other devices.
I'm wondering: if you put 2/4 sensors at the rear activated by the reverse, how could you activate 2/4 sensors installed on the front ? Obviously not with the brake or reversing light? It perhaps needs to be incorporated into the gear shift ?
because you control the distance to anything in front of you you just don't get right up on anyone's butthole and you won't trigger the sensor. in traffic someone might pull up right on your butthole though and you only want the rear sensors on when you are in reverse!
Did you figured out?
Can this be used as proximity/driving sensors to improve safety, by having all 8 sensors ON and connecting it to a switch to trigger (turn on/off) manually. How would one wire this.
Yes you can do, we also sell the switch on TadiBrothers.
Call us for more details at 866-966-5550
Connect white, yellow, red to always on after ignition key on like radio +ve source , then install a ON / OFF swich on black wirev(or red also supposed work)
Hi again so do you mean (black and red and white ) I have to connect from rear brakes
And yellow one I have to connect to plus to reverse????
So every time I step on the break it will turn on? Even when on a stop light?
I have the same question, do you find the answer?
No, there are different ways to set it up so that it will only activate when you go in reverse
Yes as per the defined procedure. However
1) you can connect white to acc +ve and put a switch on white cablle and make it on prior to requirment (but we may forget to on it when it is needed
or
2) we can keep it always on , we have to maintain a large distance in the front to avoid beeping
3) In case it is connected to brake as designed , it will be helpful in front accurate parking but it is not going to alert of front obstacle prior to braking unlike in reverse ( which may not be needed as front visibility is good )
However there is a scope for improvement.
The module or "brain" of the system receives a constant power supply, with trigger wires connected to your reverse light. This setup allows the sensors to activate when a nearby object is detected and enhances the detection range when the reverse light is engaged.
hello, can the beep of monitor been redused?it is too loud..thank you
Stick a tape on the speaker, you'll hear it enough
can you manually turn off the smart monitor
I keep a trailer hitch on my truck at all times...Will this affect this system at all?
Same question!
So, how would you know what among those sensors will hit something? Does it indicate left, right , center sensor will hit?
It is there anyway to lower down the volume? i have it and i think is very loud.
I have the same question. The sensors in the front of the car must be activated at a speed below 10 km/h, in the state in which we want to park, and in some cars there is a port called the canbus to which this radar is connected, and according to the speed The car will be activated, and the range of the front sensors should be low and they should beep only when we reach 10 cm of the obstacle.
Even in bumper to bumper traffic we are below 10kmph
Quick question i have a kenwood radio that have the parking assist included option but i wanna get rid off the monitor you guys sell to replace the 4 pin wire to 4 pin to dual av male and av female so that i can use the monitor port to connect to my camera and the sensor then send all the signal to the radio is that possible??
if u connect yellow wire to brake switch every time you hit the brake pedal gonna hear a beep from module. is this normal or there another way to connect yellow wire?
There are a few ways to do that. Call our service center and they will help you with that 866-966-5550.
Can volume be adjusted?
Yes, The volume can be adjusted on sensor speaker . The display version the sound can be turned muted on demand with a button
From where i can buy them please?
The video shows the first 4 sensors connections are for the front but the PDF you sent me after purchase says the first 4 sensors are for the rear. Which is it?
Just one major thing... WHERE do I connect the power harness in the car??? I know it's kind of a newbie question.
How do you connect the sensors with a Kenwood Radio ?
Do you need to connect the red cable? What happens if you don’t connect it?
Scusami o acquistato dei sensori x la yuke, ne devo montare 8, anteriori e posteriori..il vero problema mi nasce sl cablaggio,qui mi nasce un problema come collegarli..
Qui abbiamo 8sensori,. Nooo 4, i quattro sono semplice..Rosso e nero che ndava al bianco e nero della retro..
ADS abbiamo io 4 fili, non solo alla 12 volt!
Grazie
Great video...How does it work on a stick shift?
Same way?
Does your stick shift not have a battery + and -, does it not have brake light, and reverse light?
What is the size of the Hole drill bit???
Watch the video, it comes with it
Hi, Clear video but does not cover the order the sensors are fitted to the bumper, assume a-b left to right? front and rear.
Hi I want to trigger front sensor if speed is lower than 5 miles , please guide me if it possible
front sensor is only suitable for automatic transmission vehicles? as it uses brake light to activate... manual transmission dont need to use breaks when front parking...
Thanks bro
so the red wire goes to the positive wire of the back light and the black wire goes to the ground or the chassis of the car, can i also connect it to the negative wire of the back light instead of the ground?
yes
can i use the same sensor to connect it to arduino?
Hi i just want to know what does the button do behind the monitor system
Mute
Can the length of wires be cut to exact installation length or must the wires remain full length as not to alter the sensors performance?
Does the length of wire affect the sensor's performance?
interesting. I would say yes.
Hi i have a problem, the display is working but no sound...
Sorry to hear that, there might be something in the wiring, please call our service department any time at 866-966-5550 and once they pull up your order, they will be able to troubleshoot it with you over the phone. Also, do you have a one year warranty on the product so if there are any technical issues, we will gladly swap it out for free.
hi. is there any way to remove the sound and just have the leds?
Yes, the display you see in the video has a button on the back that allows you to toggle the sound
TadiBrothers.com
Where is that button
If you purchased the sensor system from TadiBrothers, the button should be on the top of the display near the round speaker holes. if you still cant find it, call our tech department and they will do their best to assist you at 866-966-5550. Make sure to have your order ID or email so they can find your order and see exactly which model you purchased.
Are the wires long enough to put this kit in a full size truck?
Yes, this sensor system was designed to fit most vehicles from a ford focus to a FedEx truck, if you need extensions we have those as well www.tadibrothers.com/products/sensor-extension-cable-10ft
I don't understand the red wire , any positive from the rear of the car , or from the accessories.
That is a great question, please call our service team for more support.
866-966-5550
Thanks
how you get 12v from/(for) brake light? for front parking sensor i tried to connect it on each of the wires (one was green and one was white with black stripe) and it didnt work..what should i do? (btw i have a toyota prius 2007)
Is there not just one main RED wire that powers all the sensors? And then obviously black is the ground and then the other wires are for triggering them at certain points?
Can these get painted ? I was planning on installing then having my car get painted do I let them know to tape them or would it be ok to paint over it
Feel free to pain them :-)
Why would last
Owner in my
Dodge truck add this is if the truck already has a backup camera.
Hello, I want that the front sensors activate when I put in reverse so not when i press the brake. Because if the front sensors will activate everytime i press the brake it will be annoying especially when you are in heavy traffic. And how does it do in bad weather?
I think you need to connect both triggering wires to reverse lamp
I have the same question. The sensors in the front of the car must be activated at a speed below 10 km/h, in the state in which we want to park, and in some cars there is a port called the Canbox to which this radar is connected, and according to the speed The car will be activated, and the range of the front sensors should be low and they should beep only when we reach ten centimeters of the obstacle.
Which one works better on Dodge Charger 2016 SE ?
This is what I would go with
www.tadibrothers.com/products/dual-parking-backup-sensor-system-with-sound-tb-s68
Thank you, but do you have Dark Gray sensor color ? I did not find it.
Hello, we have a large assortment of colors feel free to call us to verify that we have (866) 966-5550. Also, feel free to paint the sensors, it will NOT affect the quality of the sensor or void the warranty.
I rather install 2 units of 4 secors not 8 . one for the rear ,connect them through reverse lights ,and for the front i connect through a switch ,so i can put them on when i need to.
That is a great idea, we have a few other customers that have done that. The only downside is that it increases the cost.
hello! Do you need car electronic products such as parking sensor, rear-view mirror? Chinese manufacturer!
Is there a sensor to turn off sensor... for when i tow i dont want it to always go off when its in reverse and i got a trailer hooked up
Use a switch in between the power supply
pls i need a diagrame of main board
Hi, Please call our tech team in Los Angeles at 866-966-5550 X 2 with your order info so that they know exactly what they should send you.
Brake not break
Mine only shows 3 lines on the screen but nothing else, my suggestions why?
can it be fixed to have just the sound only
We have a version that only has sound, SKU2830325 on the TadiBrothers website www.tadibrothers.com/products/parking-backup-sensor-system-with-sound-and-volume-control-tb-s058s
However, the sound on the display system in the video is a little bit crisper and what some people do is either cover the screen with electric tape or just bury the display under the seat or dash. I hope this helped :-)
Yes, we have a speaker version and some people just hide the display under this dash
Someone knows anything about error E4? The screen just show two red lines and when I got reverse it blink showing error E3, help please
You might have a bad sensor. Try unplugging them one at a time and see if the error goes away.
FUNNY COMMENT AT THE END OF IT.
L.M.A.C.O. LOL
Back up system and or side warning system.
All Voice, no beeping? Voice tells the driver how many feet, inches away that the vehicle is from your vehicle. Drivers side approaching vehicle / passenger side approaching vehicle with beep as the vehicle gets closer , 1 foot continuous beep. Sounds like a great idea huh?? Some dumb people drive without lights on at night , sad but true!! This isn't 2010 anymore, we want cool ways of knowing, vibration mini motors in the seats, one on one left cheek and the other one on the right cheek of our ass cheeks in case the radio is too loud you can feel the vehicle getting closer!! LOL
Great way to show me how to do a car installed product by installing on a .... TABLE not in a CAR???????
Unless help
are you guys importing generic chinese products and rebranding them as yours? this stuff is identical to the ones on ebay at a fraction of your price.
How to install another dust display to the camera ? And is possible to turn the noise down ?