Since it has full disk brakes and the light in the nose cone its a 03 or newer frame but it looks like the right engine cover or hole engine is 02 older
looks so much better,but the motor dont sound the best at all.11:39 and then some.to much rattle.maybe piston wrist pin,crank bearings,etc.there is something not happy in your motor.then again at 12:07 and then some.2 strokes are not quit for sure but there is something else make to much noise!!!
hey man great video but try wd 40 when you steal wool the plastics because its a penetrant and removes oxidation and its shines them up at the same time defiantly give it a try
Dang that is nice, I have a blaster it has been sitting it starts up and runs but it won’t stay idle I have to keep pushing the gas lever if not it will shut off
@@ApacheGarage I open up the carb learning from you’re videos, it was not dirty at all it was dry the jet was not dirty also, I’m not sure why but it will idle if I unscrew the bolt where fuel comes out from carb. I will try the Idle screw tomorrow
Thanks for watching. I will be posting quads for sale on my instagram if you want to purchase. Instagram link in description.
Thanks I live in 🇵🇹
You sell a lot of bikes? I’m looking for a kx250 of a cr250 4 stroke
How much you charge bro I need a restore asap
Bro u got a gem!!! Probably stole that blaster!! soon as I saw that carb wasn’t tapped & the oil block off was still there! You won bro!
I got a good deal on it. I have a few other projects I’m working on at the moment also. Thanks for watching!
Nice work! Looks great. And you didn’t have to completely disassemble the bike and have everything powder coated.
Thank you
Great job man. But that isn’t a 2001. With the updated front end and hydraulic brakes it’s a 2003-2006 model. Great job on it tho and great video!
Thank you
Holy shit that thing has got a ton of piston slap…. Are u gunna throw a top-end on it??
Since it has full disk brakes and the light in the nose cone its a 03 or newer frame but it looks like the right engine cover or hole engine is 02 older
Yes it’s an 03
that actually is not a 2001 with the headlight being into the wiring harness that would be a 2003-2006
Yes it’s an 03
Ik just by looking at it a 2003-2006 I think it’s a 2003
Yea it’s not an 01. I messed up on the title
Threw that dirty ass carb in the chem-Dip rooky mistake
I’m a rooky
Always clean ur machines before you work on them makes it alot easier
It was easier for me to make this one run so I can drive it all the way around to clean it
Great video. That’s a crazy transformation!
Thank you
I dunno why people do stock suspension on these. They look awesome widen out wit +4 swing arm and a banshee axel with longer a arms
I like how it looks stock
So my blaster had its oil box deleted..but now I have a hole in the side of my motor..is there a way to cover it
The motor is damaged?
No it was missing the oil line from the tors delete.. it ran from the tors ..they actually make a cover for that
nice work brother!! looks awesome
Thank you
looks so much better,but the motor dont sound the best at all.11:39 and then some.to much rattle.maybe piston wrist pin,crank bearings,etc.there is something not happy in your motor.then again at 12:07 and then some.2 strokes are not quit for sure but there is something else make to much noise!!!
not an 01
@@brandomichael6545 yes thank you
Great transformation, what are you using on the plastics what pad on the buffer ? I want to shine my Honda atc plastic back
I used cherry wax on a wool pad.
@@ApacheGarage what brand wax ? I have tried using some chemical on my bike but I was not satisfied.
@@user_ws7qt4yh9p it’s called chemical guys cherry wet wax
Spinning your wheels with that gas tank
I've always loved the Blaster and remember a friend having one back in the late '90s. I had a Honda 300 and difficulties keeping up with him.
Blasters are great quads they are also one of my favorites.
Crazy how you don’t got more subs?
It’s a 2005
I remember I messaged up on the title of the video but if I remember correctly it was an 03
That's not a 2001
I know I messed up on the title but I just left it like that the video did pretty good.
First step: clean the vehicle for easier work.
No hate towards you specifically I see other people do it too
I made it run first so I can take it to the front of my house easier and not struggle
Great job keep posting restorations on these cheap abused quads n bikes💯👍🏼
Thank you
Great work the blaster looks super good 👍🏼✌🏼keep it up 👏🏼
Thank you
hey man great video but try wd 40 when you steal wool the plastics because its a penetrant and removes oxidation and its shines them up at the same time defiantly give it a try
Thank you. I will give it a try next time
Well done
Hey man where did you get those decals?
I got them on eBay
You can drive the blaster you have a banshee
Thank you
nice work. made that thing look mint
Thank you and thank you for watching
Dang that is nice, I have a blaster it has been sitting it starts up and runs but it won’t stay idle I have to keep pushing the gas lever if not it will shut off
Clean the carburetor and adjust the idle screw
And thank you for watching
@@ApacheGarage I open up the carb learning from you’re videos, it was not dirty at all it was dry the jet was not dirty also, I’m not sure why but it will idle if I unscrew the bolt where fuel comes out from carb. I will try the Idle screw tomorrow
What type of steel wool did you use?
0000 Steel wool
$100? That’s a steal of a deal!!
Thanks for watching
Love a blaster just done one myself
Thanks for watching
Pretty cool build dude
Thank you
How much did you paid for the blaster ?
100 and 150 in parts
I paid $100 for the blaster and I spent $150 in parts. Total came out to $250 spent
Done a good job mate
Thank you
Sweet ride it will run alot better without that air box lid on it
Thank you
They actually will run better and make a little more power without the lid, but you need to bump up the main to compensate for the extra airflow.
Good work
Thank you
Heck yeah!
Thanks for watching
Hey what did you use On cleaning and buffing the plastics super interesting.
I used cherry wax
Amazing job
Thank you
nice job
Thank you