ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Man I wish I had a laser cutter, that’s just beautiful.
These are beautiful
Thank you
so I am guessing this will take a couple of 12x24 inch boards?
Total material needed: 26x16 inches. But if you are using 12x24 boards, then 3 pieces.
Do you have to do any kerf offset to make the pieces fit snugly?
No, the files already designed with kerf in mind (for 3mm plywood). I've made some other thicknesses too (I send them on request).
Can u, please, show us, how u make that things in program? What u use?
You want a tutorial on how to design this kind of boxes? I use Illustrator, but any vector editor will work.
@@customcraftua Yeah, i want tutorial. I using coreldraw, i have no ilustrator, and my laser work directly from corel. I have chinese ruida laser. And i just started to learn. Tnx alot 🌹
Could you tell me where you got your wood. I am using Glowfordge PG medium Draftboard and they are not fitting without filing down.
We use Baltic birch plywood in our country we can buy it now … also we use native Ukrainian plywood as well
What kind of settings do you use for the 3mm birch wood? is that similar to 1/8 mdf?
For 3mm plywood I use (for 100w co2 laser) speed: 40mm/sec; power: 61%. MDF is usually a bit harder, I’d lower the speed to 25-30mm/sec
What dimension would you recommend the mdf or wood board to be when making it in the laser engraver?
Overall dimensions of all part is 37x64cm. The largest part is 37x13cm. Just add a bit extra room from the sides.
how thick is your board?
My plywood is 3mm (2.8mm)
Where to order different files???
www.etsy.com/shop/CustomCraftUA
@@customcraftua Than you for this!!! God bless you!
what is the measurements once built HxWxD?
Inner size: Height - 10 cm, Width - 10 cm, Length - 36 cmOuter size: Height - 12.5 cm, Width - 10.5 cm, Length - 36.5 cm
Woa 🙌👌
Thank you :)
😍💙
Сколько стоит макет?
С текущей скидкой - 4$ и 20 центов
@@customcraftua 4 доллара это за все макеты?
Can you please try adding a voice over? I don’t know why, but it really bothers me when people don’t talk in their videos… just saying
Ссылка не работает. Напиши в ответ
The link is in description, working fine.
Man I wish I had a laser cutter, that’s just beautiful.
These are beautiful
Thank you
so I am guessing this will take a couple of 12x24 inch boards?
Total material needed: 26x16 inches. But if you are using 12x24 boards, then 3 pieces.
Do you have to do any kerf offset to make the pieces fit snugly?
No, the files already designed with kerf in mind (for 3mm plywood). I've made some other thicknesses too (I send them on request).
Can u, please, show us, how u make that things in program? What u use?
You want a tutorial on how to design this kind of boxes? I use Illustrator, but any vector editor will work.
@@customcraftua Yeah, i want tutorial. I using coreldraw, i have no ilustrator, and my laser work directly from corel. I have chinese ruida laser. And i just started to learn. Tnx alot 🌹
Could you tell me where you got your wood. I am using Glowfordge PG medium Draftboard and they are not fitting without filing down.
We use Baltic birch plywood in our country we can buy it now … also we use native Ukrainian plywood as well
What kind of settings do you use for the 3mm birch wood? is that similar to 1/8 mdf?
For 3mm plywood I use (for 100w co2 laser) speed: 40mm/sec; power: 61%. MDF is usually a bit harder, I’d lower the speed to 25-30mm/sec
What dimension would you recommend the mdf or wood board to be when making it in the laser engraver?
Overall dimensions of all part is 37x64cm. The largest part is 37x13cm. Just add a bit extra room from the sides.
how thick is your board?
My plywood is 3mm (2.8mm)
Where to order different files???
www.etsy.com/shop/CustomCraftUA
@@customcraftua Than you for this!!! God bless you!
what is the measurements once built HxWxD?
Inner size: Height - 10 cm, Width - 10 cm, Length - 36 cm
Outer size: Height - 12.5 cm, Width - 10.5 cm, Length - 36.5 cm
Woa 🙌👌
Thank you :)
😍💙
Сколько стоит макет?
С текущей скидкой - 4$ и 20 центов
@@customcraftua 4 доллара это за все макеты?
Can you please try adding a voice over? I don’t know why, but it really bothers me when people don’t talk in their videos… just saying
Ссылка не работает. Напиши в ответ
The link is in description, working fine.