I just like it because unlike a lot of full auto pistols, full auto real steel. Sure there are glock 17/19 conversions where they have a fire selecter on the back of the upper where the firing pin cover would be but the 18c has cutosuts to make the slide lighter so ot ahoots faster. So much so that you get stopages on a 30 round where as the conversions you stick mag where as on conversions you dont they also have baffles to compensate the recoil. In airsoft, the baffles are esthetic. Thats why the c is there. It means compensated.
Dont forget to cover all inner mechanical with silicone oil spray expecially hammer. Silicone cover the metal from cold gas that will crack your hammer otherwise your gun will fire on its own right after your first reload. Avoid using auto frequently if you didnt cover up your inner parts and hammer.
i know this vid is old but the we tech g18c Is really cheap for what it is and if bought now you can really customize the interals nicely! i got the elite force g18 which does not really need anything different at all other than a new spring but that is cheap And it shoots REALLLY fine and fun
The only thing i dont like about airsoft glock 18c's is no longevity. Marui's gass system is weak and made for duster gas and is all polymer. You can use green gas but after ill guess 1000 shots, it will start to break down and you will have to buy a metal slide and while you're at it, a metal rear sight since they do break and hold the gbb unit in place. For we the loading nozzle is prone to breaking. If you do enough digging, you can find an aluminum nozzle for it. jk army and rwa sell them. Other than that, run it until it breaks.
@@drklwo39 best one if you dont want to pay the extra money for a vfc is probably kjw. Its a tm clone but with a metal slide. In fact, theyre the only company that copys tm. We and vfc both use their own design.
Darkshock 42 MLG 0 the original stark arms crap was a lot closer, but the dimensions were proprietary. We tech just adds “innovations”. KJW is probably the best bet besides tm. Tbh for a 18c, all you need is a steel hammer and you’re set
I love your channel man. Inspired me to start a We Glock Collection. All three of my we Glock’s came in. Airsoft global is by far the best. But army panda came through as well so I’ll definitely be ordering new parts like a TM outer barrel and maybe a laser something lol keep up the good videos dude!!
Awesome man! Really appreciate the feedback on my channel :) Im a huge glock fan myself and always am going to continue to fill up my glock family haha
Quick question. Do you know of any replacement slides for this gun? Here in Scotland you need a UKARA (airsofting) membership or a valid reason to get full black airsoft weapons. Because of this I need to buy airguns painted in a two tone colour variant. I plan to buy a two tone and replace the slide on the pistol to black once I get the required membership. Trying to find a gut at the moment that has good aftermarket slides or replacement slides readily available
Hey man I’m looking to buy this soon and I’ve seen a lot of people buying a upgraded recoil spring and outer barrel with the gun, can you link me the upgrades you used for the pistol ? Thanks !
I've got one of these coming from kyairsoft with an extended mag. Should I worry about customs seizing it? I've read a few posts saying that they do target these. I'm also concerned about whether or not it will have the orange tip on it. I've bought a WE F226 from Redwolf and the website had images of it without one but I looked on their website and it said that they are required to put the orange tip on it for US sales. I couldn't find anything about that on kyairsoft's site however.
ok so i had a we 18c before but i sold it. big regret loll anyways im thinking of buying/importing another one. do you think its more risky this time around with the elite force glocks being around? dont feel like buying one and then customs taking it.
Jello a Glock 18c from Elite Force isnt promised so you should buy the WE Tech now and if they do come out with an 18c then you can sell it or just buy another one
@@drklwo39 two things, first, have you ever had any experience with a WE tech Glock or asked anyone who has their opinion on it, and second, good luck telling this guy an easy, reliable way to get a TM Glock.
Maxcellaneous I’ve owned multiple we glocks, stark arms and multiple Marui’s. From personal experience the tm outlasted all of them. I’ve had quite a bit of experience with airsoft working with them, and just using common sense, you can tell the casting in the tm is much better quality despite it using a lower propellant. The problem with WE is that it’s not quite tm compatible too. The only other alternative that is better is kj works. But I’d still prefer the tm, as it’s the original design people clone their guns off of
Fatlittlefrog I’ve delt with both. I’ve only had experience with the original stark arms 18c’s, which is still VFC, but the only issue I had with those were hammer. We had definitely gotten better casting, but they do break. And since We tech doesn’t have a lot of upgrade parts, go with VFC. But tbh, these are all are based on Tokyo Marui. That’s the gold standard. Another brand is KJW. Pretty much exactly 1:1 with Tokyo marui
Quick question, I bought the WE Tech 50 round extended mag for my G18 and was wondering how long should I fill it with gas for? How long should I do this for the regular mags as well? Thanks.
if i order from armypanda or airsoftglobal to texas will it be taken up? Sorry im new to airsoft so im not too great at buying from diffrent countries and how it works.
Im not sure for Texas, but airsoftglobal really takes the effort to make sure things dont get seized. Check out my video with how to avoid seizure of your airsoft products.
With the G18 , are you sacrificing anything over the G17 ? I mean , the G18 does everything the G17 does , so unless you have a problem with the selector might as well get that one , no ?
Honestly it’s like a 2 in one deal if you get G18c. I never had issues with the selector switch so I would not let that be the deciding factor. Pair that with an extended mag and it will be the perfect package.
@@MaxCherepenin Thanks for that. In fact I was looking at the G19 , but could not find one ( I'm from EU , need to get it online and its a pain ) .Since I had to content with the larger Glock anyway, I opted for this since it has the auto feature.
Ef 18c is actually rigjt around the corner.mid summer and its late spring. Ill sat mid july and if i can i will pay the $190. Also i hope its reliable and it probabaly is because technology has gotten better in the past 10 years. Also posiden made reliable 18c's that wont break but those were limited quantities since they were made by hand.
Hmm I would say the ELite force brand and TM for quality. I would say WE Tech is great as well for cheap and parts are not hard to find if something does break.
Honestly, it will depend on what you want. I like both so I got both and enjoy them equally. The quality seems to be there with EF and the accurate trademarks are a plus for authenticity.
Loving your videos so far man. Subbed! I was wondering about the aftermarket upgrades for the G18c. I heard there are far less of them available for the G18c as compared to the G17 variant. Is that true? I was also wondering about the hammers on the G18Cs - they seem to be quite a lot weaker than those of G17s? Is that correct?
Thanks so much man! that is true as i tried to get some more upgraded for my g18c and there is not much out there. However, international retailers tend to carry more parts.
They are comparable with vsr 10 parts. honestly all you really need is a garder aluminum nozzle and a maple leaf hop bucking and barrel, it's like 50 on ebay
Hi Max! I have the same WE glock 18c for a year and in my country (spain) there is some months when we have low temperatures and the gun doesnt work well. Im thinking about upgrade internals to use it with co2 mags like the kp17 or kp18 but i cant find KJW original parts. Do you know what parts and brands i can buy? Thanks you!
Yes it is easy to brake... i have my experience with it beacause i've ran it in stock. It was breaking in the firering mechanism. What was breaking was the spring or it broke the thing that the spring is hooked on. So i totaly reccomend steel G-20 (google it, it is the hammer) and aluminium nozzle, cuz it has more power and it is more robust. (With my we g18c was there one more problem... when i used a normal green gas the silicon oil was getting on to the hop up rubber and causing the bb drop down after like 10 meters. Thats like 11 yards. Like it wasn't just start dropping. It totaly shoot in to the ground if you know what i mean) i hope this helped you and im sorry for the mistakes. Im not from Czech republic and we dont speak English.
The loading nozzle breaks easy. Buy an aluminum one from red wolf airsoft or jkarmy. Be sure to get a we nozzle and not a marui nozzle. They aren't interchangeable.
@@Scoobydcs actually i heard thats a bad idea a while ago. What i do reccomend is putting a rubber damper on the nub at the top. just cut a piece out of a rubber band and glue it to the nub.
The part where you said the glock 17 os semi auto isnt entirely true. Stock they are but if you have an auti sear and fire select back plate, you can gwt a full auto glock 17. Dont make one unless you got the parts from someone who owned them before 1986. That's when machineguns for individual use was banned. If they were grandfathered and you do the paperwork and have the $10000, the fbi will give you the ok to make a full auto glock. They are that expensive because supply and demand. You just cant manufacture the sears and/or backplates. That's illegal. For assault rifles, you need a machine gun lower since the ar15 lowers have the spot for the auto sear blocked and you'd need to mill it out.
I have a TM g18c upgraded slide parts with guarder parts. Has a WE mag and when i go to shoot it, its kind of weak on the gas pressure and gas in the mag is done within half the normal mag only. If set to full auto shooting the gas leaks out the mag after a few bbs. So basically with a full fill of gas in the magazine i can only shoot half the mag before it runs out. Lol no leaks on the mag either. What can be the issue. I need some help.
We tech Glock mags do not work in the Marui. The gas route seal is different. If you bought a Marui gas seal and replaced the we one, it would work much better. Hope this helps.
Not sure if it works as I have not tried. You can get a stark arms mag base that looks like the KSC glocks mag base. You may need a bit of tape so it fits snug. it’s easier than buying a whole new mag.
It does and they do sell one for the we glocks. But be aware that the stock oem nozzles are not capable of handling that power. Make sure you upgrade the nozzle as well.
Aye bro plz can you post a video on the we g18c on what stuff you did to the front of the gun because if i buy one i don’t want it to be showing the gold thing i want it just like yours what did you do to the front that its just a barrel like clear plz reply i want mine just like yours just tell me the stuff you did to your we g18c plz bro appreciate it🙏
If I understood correctly, you want to make it to where you cannot see the inner barrel right? Get the steel gaurder outer barrel, they sell it for g17's but it fits a g18c just fine as I have it on mine in this video. here is link www.evike.com/products/85806/
Max Cherepenin so all i do is when i buy the we g18c from airsplat and take the orange tip out then buy the guarder outer barrel steal from the website you gave me then remove slide take the inner barrel that came with the we g18c gun then put the inner barrel with the guarder outer steal barrel right? And that would make it where you can’t see anything inside like clear just like yours right?
Does anyone know where to order the Wetech Glock 18c? The only place I can find it is some sketchy Chinese sites. If that's the only place I can get them, which site is the most reliable?
Are you taking about the extended mag? I bought that from evike, they still sell them there and you can apply a coupon in it as well. The pistol itself does come with a standard mag.
idk if they'll even release state side at this point :/ Stark Arms glocks are basically sold out everywhere so there's really no way to get the "Elite Force Glock" at this point
Best solution for this is multiple mags, extended mags too. I know there are valve upgrades but I have no idea if they curb the freeze up issue (if I understand correctly, you mean when it gets too cold to function after being fired in rapid succession?)
Nd Co they don’t have legal licensing for it but if u want the trademarks try Umarex I know they have their trades www.evike.com/search/?search_in_description=1&sort=3a&keywords=umarex+and+glock&categories_id=45&inc_subcat=1
@@8233Tae I really love the umarex but sadly the aftermarket parts are wayyyy to limited so good luck upgrading the thing. I have looked months for a threaded barrel and just no luck :(
![ตีสิบเดย์ [FULL] | เปิดใจ "อาจารย์ เบียร์ ฅนตื่นธรรม" นักสนทนาธรรมสายดุดัน!](http://i.ytimg.com/vi/vqaBI_mnoDk/mqdefault.jpg)
I just like it because unlike a lot of full auto pistols, full auto real steel. Sure there are glock 17/19 conversions where they have a fire selecter on the back of the upper where the firing pin cover would be but the 18c has cutosuts to make the slide lighter so ot ahoots faster. So much so that you get stopages on a 30 round where as the conversions you stick mag where as on conversions you dont they also have baffles to compensate the recoil. In airsoft, the baffles are esthetic. Thats why the c is there. It means compensated.
Great gun! I have one. The full auto is incredible!
Dont forget to cover all inner mechanical with silicone oil spray expecially hammer. Silicone cover the metal from cold gas that will crack your hammer otherwise your gun will fire on its own right after your first reload. Avoid using auto frequently if you didnt cover up your inner parts and hammer.
i know this vid is old but the we tech g18c Is really cheap for what it is and if bought now you can really customize the interals nicely! i got the elite force g18 which does not really need anything different at all other than a new spring but that is cheap And it shoots REALLLY fine and fun
Really looking into one of these. Do you recommend a Gen4? Also what size BBs does this use?
david binkowitz 6mm
Wowwww... glizz9 I would say .20s ir .25s
All the other glocks don’t have the white coloring on the side like yours does? Where can I buy this exact one?
I actually used a crayon to make the white stick out, I have a tutorial on how to do it! Check it out. th-cam.com/video/XOoCkDAfJ_4/w-d-xo.html
HobbyLobbyTactical Crayons
Max Cherepenin Where do i get the g19 or g26 airsoft glock from
@@MaxCherepenin what gen mate?
Crayon and wd40
The only thing i dont like about airsoft glock 18c's is no longevity. Marui's gass system is weak and made for duster gas and is all polymer. You can use green gas but after ill guess 1000 shots, it will start to break down and you will have to buy a metal slide and while you're at it, a metal rear sight since they do break and hold the gbb unit in place. For we the loading nozzle is prone to breaking. If you do enough digging, you can find an aluminum nozzle for it. jk army and rwa sell them. Other than that, run it until it breaks.
Depends on who takes care of the gun. To be fair we tech is much lower in quality
@@drklwo39 best one if you dont want to pay the extra money for a vfc is probably kjw. Its a tm clone but with a metal slide. In fact, theyre the only company that copys tm. We and vfc both use their own design.
Darkshock 42 MLG 0 the original stark arms crap was a lot closer, but the dimensions were proprietary. We tech just adds “innovations”. KJW is probably the best bet besides tm. Tbh for a 18c, all you need is a steel hammer and you’re set
I love your channel man. Inspired me to start a We Glock Collection. All three of my we Glock’s came in. Airsoft global is by far the best. But army panda came through as well so I’ll definitely be ordering new parts like a TM outer barrel and maybe a laser something lol keep up the good videos dude!!
Awesome man! Really appreciate the feedback on my channel :) Im a huge glock fan myself and always am going to continue to fill up my glock family haha
How is the reliability? Would it malfunction after a few years?
Quick question. Do you know of any replacement slides for this gun? Here in Scotland you need a UKARA (airsofting) membership or a valid reason to get full black airsoft weapons. Because of this I need to buy airguns painted in a two tone colour variant. I plan to buy a two tone and replace the slide on the pistol to black once I get the required membership. Trying to find a gut at the moment that has good aftermarket slides or replacement slides readily available
Hey man I’m looking to buy this soon and I’ve seen a lot of people buying a upgraded recoil spring and outer barrel with the gun, can you link me the upgrades you used for the pistol ? Thanks !
I've got one of these coming from kyairsoft with an extended mag. Should I worry about customs seizing it? I've read a few posts saying that they do target these. I'm also concerned about whether or not it will have the orange tip on it. I've bought a WE F226 from Redwolf and the website had images of it without one but I looked on their website and it said that they are required to put the orange tip on it for US sales. I couldn't find anything about that on kyairsoft's site however.
This should answer your question: www.reddit.com/r/airsoft/comments/8clkt3/buying_a_new_we_glock_in_the_us/dxgiv6s/
ok so i had a we 18c before but i sold it. big regret loll
anyways im thinking of buying/importing another one.
do you think its more risky this time around with the elite force glocks being around? dont feel like buying one and then customs taking it.
or, alternatively, do you think its better for me to wait (probably another year) for an elite force 18c
Jello a Glock 18c from Elite Force isnt promised so you should buy the WE Tech now and if they do come out with an 18c then you can sell it or just buy another one
Bruh EF Glocks are literally Stark Arms glocks. Get a WE from KYAirsoft, they ship to the US
@@buddybuddy8263 elite force glocks are trash compared to the we ones
Do you recommend the fully licensed Glock 18c or the WE tech version?
Lmao don’t get we tech. My opinion? Get a marui
@@drklwo39 two things, first, have you ever had any experience with a WE tech Glock or asked anyone who has their opinion on it, and second, good luck telling this guy an easy, reliable way to get a TM Glock.
Maxcellaneous I’ve owned multiple we glocks, stark arms and multiple Marui’s. From personal experience the tm outlasted all of them. I’ve had quite a bit of experience with airsoft working with them, and just using common sense, you can tell the casting in the tm is much better quality despite it using a lower propellant. The problem with WE is that it’s not quite tm compatible too. The only other alternative that is better is kj works. But I’d still prefer the tm, as it’s the original design people clone their guns off of
drklwo39 any cons about the we tech 18c and any opinions on the elite force? thanks
Fatlittlefrog I’ve delt with both. I’ve only had experience with the original stark arms 18c’s, which is still VFC, but the only issue I had with those were hammer. We had definitely gotten better casting, but they do break. And since We tech doesn’t have a lot of upgrade parts, go with VFC. But tbh, these are all are based on Tokyo Marui. That’s the gold standard. Another brand is KJW. Pretty much exactly 1:1 with Tokyo marui
Quick question, I bought the WE Tech 50 round extended mag for my G18 and was wondering how long should I fill it with gas for? How long should I do this for the regular mags as well? Thanks.
Well the gas capacity is pretty large so filling it may take a few seconds longer than the stock mag. You should here the hissing stop when full.
The ultimate mini uzi, we, or marui, run till it breaks then buy after market internials, oh, dont forget to lube it and keep it lubed
I did a guide rod stainless and a maple 🍁 leaf barrel and hopup and a bigger vavle for one of mags and it shoots amazing
if i order from armypanda or airsoftglobal to texas will it be taken up? Sorry im new to airsoft so im not too great at buying from diffrent countries and how it works.
Im not sure for Texas, but airsoftglobal really takes the effort to make sure things dont get seized. Check out my video with how to avoid seizure of your airsoft products.
With the G18 , are you sacrificing anything over the G17 ? I mean , the G18 does everything the G17 does , so unless you have a problem with the selector might as well get that one , no ?
Honestly it’s like a 2 in one deal if you get G18c. I never had issues with the selector switch so I would not let that be the deciding factor. Pair that with an extended mag and it will be the perfect package.
@@MaxCherepenin Thanks for that. In fact I was looking at the G19 , but could not find one ( I'm from EU , need to get it online and its a pain ) .Since I had to content with the larger Glock anyway, I opted for this since it has the auto feature.
For how long do you own the G18C? 2 years later, did it break on you or does it still work until today?
Still a beast to this day. Have not had to change anything on it.
@@MaxCherepenin Fine, but have you used it a lot 🙂
Ef 18c is actually rigjt around the corner.mid summer and its late spring. Ill sat mid july and if i can i will pay the $190. Also i hope its reliable and it probabaly is because technology has gotten better in the past 10 years. Also posiden made reliable 18c's that wont break but those were limited quantities since they were made by hand.
Whats the best best best airsoft glock 18c? Doesnt matter price or hard to find
Hmm I would say the ELite force brand and TM for quality. I would say WE Tech is great as well for cheap and parts are not hard to find if something does break.
@@MaxCherepenin shoud i keep saving to get a elite force or buy a we tech
Honestly, it will depend on what you want. I like both so I got both and enjoy them equally. The quality seems to be there with EF and the accurate trademarks are a plus for authenticity.
Loving your videos so far man. Subbed!
I was wondering about the aftermarket upgrades for the G18c. I heard there are far less of them available for the G18c as compared to the G17 variant. Is that true? I was also wondering about the hammers on the G18Cs - they seem to be quite a lot weaker than those of G17s? Is that correct?
Thanks so much man! that is true as i tried to get some more upgraded for my g18c and there is not much out there. However, international retailers tend to carry more parts.
They are comparable with vsr 10 parts. honestly all you really need is a garder aluminum nozzle and a maple leaf hop bucking and barrel, it's like 50 on ebay
Hi Max! I have the same WE glock 18c for a year and in my country (spain) there is some months when we have low temperatures and the gun doesnt work well. Im thinking about upgrade internals to use it with co2 mags like the kp17 or kp18 but i cant find KJW original parts. Do you know what parts and brands i can buy? Thanks you!
Gun Nut you mean nozzle and internals? or only nozzle? thx!
is it really true that this G18c in particular easy to break? if so how do you prevent it??
Yes it is easy to brake... i have my experience with it beacause i've ran it in stock. It was breaking in the firering mechanism. What was breaking was the spring or it broke the thing that the spring is hooked on. So i totaly reccomend steel G-20 (google it, it is the hammer) and aluminium nozzle, cuz it has more power and it is more robust. (With my we g18c was there one more problem... when i used a normal green gas the silicon oil was getting on to the hop up rubber and causing the bb drop down after like 10 meters. Thats like 11 yards. Like it wasn't just start dropping. It totaly shoot in to the ground if you know what i mean) i hope this helped you and im sorry for the mistakes. Im not from Czech republic and we dont speak English.
The loading nozzle breaks easy. Buy an aluminum one from red wolf airsoft or jkarmy. Be sure to get a we nozzle and not a marui nozzle. They aren't interchangeable.
@@darkshock42mlg05 any chande of some links?
@@Scoobydcs actually i heard thats a bad idea a while ago. What i do reccomend is putting a rubber damper on the nub at the top. just cut a piece out of a rubber band and glue it to the nub.
@@darkshock42mlg05 what nub?
I picked this up in a shop called Side Arms in Akihabara Japan
Love it!
Very cool!
Wait you must actually mean the aug akhiabara accept. If ots a factory new stat track, its worth a lot.
Can you put the link of the gun to buy it ??
In Canada they do not sell these anywhere I go and it is so disappointing
Try airsoftglobal.com
Will other msgs fit it? I want an extended mag but the we 50 rd mags are out of stock everywhere
They’re in stock in kyairsoft.com
Where in Canada can it be bought?
I just bought a w.e. g17 (silver slide version) what magazines can you recommend? would like to know b4 I start spending money.
Well more of the original WE mags wouldn't hurt and also the WE extended mag.
Luke Tecpa where did you get it?
The part where you said the glock 17 os semi auto isnt entirely true. Stock they are but if you have an auti sear and fire select back plate, you can gwt a full auto glock 17. Dont make one unless you got the parts from someone who owned them before 1986. That's when machineguns for individual use was banned. If they were grandfathered and you do the paperwork and have the $10000, the fbi will give you the ok to make a full auto glock. They are that expensive because supply and demand. You just cant manufacture the sears and/or backplates. That's illegal. For assault rifles, you need a machine gun lower since the ar15 lowers have the spot for the auto sear blocked and you'd need to mill it out.
Where can I buy the standard oem magazines for the Glock 18c?
Probably evike or just google a site.
I have a TM g18c upgraded slide parts with guarder parts. Has a WE mag and when i go to shoot it, its kind of weak on the gas pressure and gas in the mag is done within half the normal mag only. If set to full auto shooting the gas leaks out the mag after a few bbs. So basically with a full fill of gas in the magazine i can only shoot half the mag before it runs out. Lol no leaks on the mag either. What can be the issue. I need some help.
We tech Glock mags do not work in the Marui. The gas route seal is different. If you bought a Marui gas seal and replaced the we one, it would work much better. Hope this helps.
Does ksc extended mag work for we Glocks cause I like how it has the extended base plate instead of the flat one
Not sure if it works as I have not tried. You can get a stark arms mag base that looks like the KSC glocks mag base. You may need a bit of tape so it fits snug. it’s easier than buying a whole new mag.
Would a co2 mag work with this?? Because i don't play CQB and want a little more power
It does and they do sell one for the we glocks. But be aware that the stock oem nozzles are not capable of handling that power. Make sure you upgrade the nozzle as well.
Aye bro plz can you post a video on the we g18c on what stuff you did to the front of the gun because if i buy one i don’t want it to be showing the gold thing i want it just like yours what did you do to the front that its just a barrel like clear plz reply i want mine just like yours just tell me the stuff you did to your we g18c plz bro appreciate it🙏
If I understood correctly, you want to make it to where you cannot see the inner barrel right? Get the steel gaurder outer barrel, they sell it for g17's but it fits a g18c just fine as I have it on mine in this video. here is link www.evike.com/products/85806/
Max Cherepenin yea bro so when you took the orange tip out did you have to put that the one you told me to buy
Max Cherepenin like if i buy the we g18c from airsplat and take the orange tip out would it show the inner barrel like the gold thing?
Max Cherepenin so all i do is when i buy the we g18c from airsplat and take the orange tip out then buy the guarder outer barrel steal from the website you gave me then remove slide take the inner barrel that came with the we g18c gun then put the inner barrel with the guarder outer steal barrel right? And that would make it where you can’t see anything inside like clear just like yours right?
You wanna rob someone huh
Does anyone know where to order the Wetech Glock 18c? The only place I can find it is some sketchy Chinese sites. If that's the only place I can get them, which site is the most reliable?
He gets his from AirsoftGlobal usually
Were can i get the g18c magazines or do they come with the glock?
Are you taking about the extended mag? I bought that from evike, they still sell them there and you can apply a coupon in it as well. The pistol itself does come with a standard mag.
Where’d u buy this?
Should I get one I heard it breaks easily
Yea it breaks fast but its easy to replace parts that last
how much is it?
Where did the magazine come from
hows the hop up? is it effective?
I would say so, I never actually had to adjust it. It shot pretty accurate out of the box
12 minutes and no video of it firing??
Did it come with an orange tip?
Yes, all u.s customers get them with orange tip.
Is the grip plastic and is the barrel loose
Yes it’s polymer. The barrel is pretty snug, I have a gaurder barrel thought.
Max Cherepenin where can I send you a video of mine?
Where u get it
Can you attach a tracer unit to the Glock18c?
Yes
I can not find this gun online anywhere and I would really like to get one
airsoftglobal.com
this is my other account thank you sooooo much this is reliable right
Yeah man! i placed several orders with them over the years. Awesome customer service.
Can you please send me the link to the Glock mag baseplate?
Not sure if ehobbyasia.com still has it, but this is where I bought it.
Make a video about the Elite Force glock release date bullshit
Working on it now actually ! Should be up sometime today or early this weekend! :)
idk if they'll even release state side at this point :/ Stark Arms glocks are basically sold out everywhere so there's really no way to get the "Elite Force Glock" at this point
Just got some great news here: instagram.com/p/BgxK_GNA9kE/
Anyone know any upgraded mags I can get for the 18c that’ll be able to shoot all bbs without freezing up
Best solution for this is multiple mags, extended mags too. I know there are valve upgrades but I have no idea if they curb the freeze up issue (if I understand correctly, you mean when it gets too cold to function after being fired in rapid succession?)
Where did you get jt
Evike back in the day
Does airsoft global ship to CA?
As in Canada or California?
Max Cherepenin California, you buy from airsoft global right?
12 minutes of repeating the same thing...nothing specific about the features internal & external nomenclature.
Is this the gen 4 version?
Yep!
G18c or G23
G 35 gen 4
why is there no real Glock logo in my WE Glock
Nd Co they don’t have legal licensing for it but if u want the trademarks try Umarex I know they have their trades
www.evike.com/search/?search_in_description=1&sort=3a&keywords=umarex+and+glock&categories_id=45&inc_subcat=1
@@8233Tae I really love the umarex but sadly the aftermarket parts are wayyyy to limited so good luck upgrading the thing. I have looked months for a threaded barrel and just no luck :(
PACKBACK which one do you have
give us a link to it
airsoftglobal.com and type in we tech in the search bar.
Max Cherepenin thx
I have one maple leafed but mags always break might have to make a metal part but it’s a naughty pistol
My 17 goes full auto when I drop the slide
Whatttt 😲😱
Can I have yours I'm broke and can your Glock freestyle tho?
Cringe
@@christiangarcia6516 nigga you ugly asfk
90 to 100 dollars, darn i missed a good deal try 200 now 🥲