Motor Driven Boiler Feed Pump (MDBFP)
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Motor Driven Boiler Feed Pump (MDBFP)
MDBFP
• How MDBFP rapid start ...
• How MDBFP rapid start ...
Boiler Feed Pump.
• Boiler circulation wat...
• Boiler light up proced...
• Start permissives of M...
• What is Working Princ...
• How MDBFP scoop tube w...
@PPTK1506
@PowerPlantDiscussion
@PowerPlantGuide
@BhagwanSRathore
@rahulsirclasses1987
Sir, why the pump speed is higher than motor speed ? By using hydraulic coupling, the output speed must lower than motor speed, isn't ?
Actually Motor input power must be higher than pump output, but RPM can be increased by hydraulic coupling, no issue. Suppose Motor input power 12 MWH so pump mechanical output cannot exceed 12 MWH.
Sir
Before starting of MDBFP reheater Attempretion valve and super heater Attempretion valve always should have open or not...?
It can be made open but block valve of both attemperator must be closed.
Good explanation. Please explain Operation of hydraulic coupling. Scoop function and Remote trip solenoid
You can watch ' How scoop tube function' video th-cam.com/video/WILqwqeLd9E/w-d-xo.htmlsi=C8mw2HscAzPMFJdq
Remote trip solenoid & Rapid start, I will explain.........
Sir need video on bearing stiffness or shaft stiffness
Ok
Sir boostor pump suction me buket stainer or main pump me conical stainer hota hai or sir boostor pump ka suction pr 8 kg tak hota hai
Yes you are correct, but suction pressure varies according to Deaerator pr
ECW water is going to mechanical seal cooling and also to seal jacket. What is seal jacket. Please differentiate mechanical seal and seal jacket
Mechanical seal water goes to mechanical seal cooler instead of directly to mechanical seal. Jacket cooling provided at pump jacket.
@@kpatelbla could you please physically differentiate seal jacket and mechanical seal
Please give reply
Sir what is water hammer??? any 3 reasons why this water hammer forms??
When steam comes in contact of condensate water it moves with high velocity of steam and create hammering sound on pipe surface, before it get condense.
Sir why balancing line is provided before pump in Condensate extraction pump??in power plant???
The only purpose of balancing line is to prevent the shifting of Rotor of the pump during operation.