Volkswagen 2.5 iE tuned exhaust clips
ฝัง
- เผยแพร่เมื่อ 10 พ.ค. 2021
- 2.5” catless testpipe to a 2.5” Rev9 GTI muffler delete catback that features a small bottleneck resonator
Recently swapped on an Injen cold air intake to replace my spectre intake I had made.
shop.redline360.com/products/... - ยานยนต์และพาหนะ
![[HIGHLIGHT] หมีLIVEปะ? | EP.171 เห็นแต่ในจอ วันนี้มาต้องขอคารวะ](http://i.ytimg.com/vi/gPWLxa0e_Z8/mqdefault.jpg)
further it gets the way the more of a v10 it sounds like lmao. love our mini lambo engine
I swear these golf's are a1 very well slept on car.
🥵🥵 sounds insane g good shit !
My man!
Duuuuuuude!!!! That was awesome!!! Now I got to do my MK5 Jetta like this
one of da best sounding cars ever
Very nice & throaty 🔥🔥
Thank you!
Sick care bro I also drive a golf and we have the same name except mines “James Garrett” lol Ive never met someone with my same name👍🏼🤙🏼
That’s wild, can’t say that I’ve met another with my name either.
Very nice
Sheesh🔥🔥🔥
0:30 if you listen closely, this sounds close to a v10 a weird note to it or just with less power xD
Which is kinda funny considering it's a 5 cylinder.
Sounds good, not fan of loud and slow cars but i guess this is ok, and the sound is good.
Appreciate it! I completely understand as I have plenty of days where my exhaust gets the best of me and I get a little annoyed. It’s much quicker now than it was in the video and will be boosted this summer to make up for all of this noise.
I think that’s the point bud
@Garrett James I've always said since I was a little boy.....if your straight piped 07k is so loud at 3k rpm that you can't even hear the turbo spool and you still got 4.5k more to go, you're having a fun time. Only thing I wish was if this engine could actually cold start one time without sounding like it won't make it down the block, but that's probably skill issue. It's fine after a sensor figures out it's awake. It's literally just "The Infamous e46 Cold Start Problem", but on a VW.
Also, what was the 0-60mph on yours? or 5/10-60mph. Mine's an 08 mk5, I got it in at 5 seconds flat from a good launch and then stopped there because sometimes it too much for me. I could tune it to be quicker, but it beats 95% of things on the road anyways. If this engine could actually have an internal engine failure (so many stories with this car on why it's indestructible) , then I've got BIG plans for it, but for now, it's going to be my 200,000 miles 5 second car.
Fuck this sounds good I'm doing this to mine asap
Make a full rev video plsssssss
Assuming this is manual...
Manual or DSG/Auto?
Either one. AWESOME BUILD MAN
02q six speed swapped from the 0a4 five speed, thanks for the love!
My doesn’t fart like that but sounds exactly the same in first second and third 2.5
I miss my 07K
🔥
Holy Hell that exhaust note is Sexy as Hell!
Damn that sound good what exhaust it running need to get one like that
Rev9 with catless test pipe
yo so I got the rev 9 catback for mine and I love it but i’ve been trying to find a rear valence that fits for the dual pipes and nothing seems to work even a gti oem one
Fr? Did you try one? What keeps it from fitting?
What tune you running? If on stock, sounds mean ,maybe a res to drone it down . Still badass lil 5cyl
Thank you 🙏, I’m running iE’s stage 1 for now. Am hoping to go stage 2 and 02q swap this summer. Someday when I’m bored I’ll get myself to slap on another resonator.
@@Garrett_James nice I got a 07 New Beetle 2.5 5spd ,gonna 6spd swap it too soon , mostly stock with a singlemass flywheel ,a 2012 oem short runner intake , evolution tuning short intake and heat shield , evolution tuning headers(not installed yet) , rear suitcase muffler delete , eibach pro springs, awesome fun beetle
@@Garrett_James is o2q swap the 6 speed transmission? Can the stock 5 speed not handle any power
I bet it’s a blast. Just got my ie manifold and am putting it on tonight
The ratios in the 02q are far better than the tin can 5 speed. A lot of people have had problems with high mileage and the 5 speed and from what I’ve heard, the 5 speeds thrown in these cars are throw away transmissions. I’ve got a 02q being shipped to me right now which I’m excited about.
build dreams
what wheel converters you using. got a set of bmw bbs sitting that i think would look cool on the 2.5
Appreciate it! They’re just bmw hubcaps I poked into some jnc005 reps. Need to get some real bbs, on the look out currently.
I like it but it's just a big too raspy I prefer the sound of audi and volvo 5 cyl
Bro not kidding , not bias , (maybe a little) I own this car, 2012 2.5 MK6-
But this is the best sounding exhaust clip I’ve ever heard and n TH-cam.
I’ve done the Ingen CAI, and the Awe Tuning Catback exhaust. How do I go to this sound? Please let me know what I need to do.
Hahaha appreciate it greatly! This is when I had a mk5 2.5 header (since then I’ve swapped in the mk6 more tubular header, my car being 2010 go the mk5 header for whatever reason), 2.5” catless testpipe to rev9 2.5” catback. It’s quite loud.
I’m fully straight piped atm howd you achieve this noise straight piped is to raspy IMO you think throwing on a vibrant res and a performance muffler would clean it up?
I would throw on a resonator or two. I have just one small bottleneck one
chmabered muffler for high pitch scream
I’ve ran a muffler on top of this and it sounded heavenly
🤤🤤🤤
No you
I got an MK5 rabbit, and I have to ask, when you went catless, did you see a noticeable power difference?
Didn’t really... sound difference is all. But if you look online, usp quotes a “solid gain of 10-15 whp and 10-15 ft/lbs of torque”
@@Garrett_James Oh ok thanks man! Mine is stock right now, but not for long lol
Yah it lost power lol
I beg to differ. www.vwvortex.com/threads/more-power-for-the-holidays-usp-motorsports-2-5l-testpipes-240-shipped.4672874/?id=4672874
what exhaust system is that? I’m tryna run dual exhaust tips on mine but idk if a GTI delete out will work with the stock 2.5 hangers
Worked perfectly fine with my 2.5. Rev9 catback
thanks bro that’s the same one I was looking at 🙏🏻
Ok. Sooooo I have a Mk6 golf. I want it to be completely straight piped and have the iE tune. How could I get the best crackle and pops and everything? If you’d know
Dude your golf is the reason why I’m keeping my Mk6 because holy good god it sounds 🥵 straight piped
Also what exit for the exhaust did you do? It looks like a GTI style exit ( or it is )
One more thing. ( I have a lot of questions 😂😭 ) I don’t know if you have the stage 1 or stage 2 iE tune. But we’re you able to hear the difference in pops and crackles? I’m not going to go with stage 2 right away and I wanna keep the engine stock for now. With the flash tool hooked up to the computer were you able to change how aggressive the sound was?
You can’t change the sound and the pops and crackles just come with. Not sure if there’s a difference to the crackles between stage 1 and 2. I have been stage 1 with a catless test pipe which allows the pops to be brought out. I’ve got stage 2 coming this week so we’ll see
@@maydayy65 to get back to you, I never experience an increase in crackles. If anything it pops like crazy up in the power band with stage 2. Lower rpms it doesn’t pop so much.
@@Garrett_James damn I got a 2.5l I’m tryna make my shit pop
🔥 is it a 2.5 engine?
Yessir
😳😮😮😮😮😮👌🤣🤣🤣
explain exactly what you did to the exhaust i need this asap
Catless 2.5” testpipe all the way to 2.5” rev9 gti mufflerless catback
what’s the set up on the engine? and what stage tune is it? also i’m not sure if you said before but what’s the exhaust set up? i want my car to sound exactly like this
In this video it's just stage 1 from Integrated Engineering, and with that; lightweight crankpulley, ecs short shifter, injen short ram intake, catless testpipe to rev9 catback (full straightpipe to small bottleneck resonator). Since then I've six speed swapped and adopted stage 2
Would it fit my mk6 golf 2.5?
Everything fits if you make it.
I’ve got a 2.5 and was wondering if the Rev9 can be bolted on or needs to be welded?
Bolted on, you a 2.5” inside diameter exhaust clamp and cut accordingly, the pipes will sleeve to one another, with the oem size being slightly small diameter.
@@Garrett_James Do you remember how long of a pipe you need to fit, and where you got it from?
@lincolnmarshall376 oreilys. 2.5” inside diameter. 18” sections.
@@Garrett_JamesDid you get two 18” sections?
All it needs is a 6 speed swap
It is 6 speed swapped now. And stage 2.
What type of exhaust system is that
Rev9
Does it vibrate super hard or no?
I have poly engine, trans and subframe mounts so yes, but they’ve worn in to where it’s not so bad. Vibration is still there though.
What test pipe did you use?
I made my own out of 2.5” piping
Does it pass smog with everything on it?
Not a chance
@@Garrett_James 😔
What wheels are those
Jnc 005s 17x8
So what all did you deleted?
All straight pipe but one small bottleneck resonator
@@Garrett_James what brand did you get?
Made my own catless testpipe with a Rev9 gti catback
@@Garrett_James did you have any trouble getting the gti exhaust to fit the 2.5?
None at all. Just extra piping between the test pipe and catback to connect the two
You gonna sell this car ever?
I still have it but it’s not my daily anymore, I’m probably going to sell it soon.
@@Garrett_James How much?
it sounds werid
Thanks
Hey man, do you have an instagram or anything. I have a mk6 2.5 and considering building it but I’m pretty new to it so would love some advice or input.
Used to be on it. @zerosevenk but I’ve taken a break