I've just ordered my Pro-ject T1. Eagerly awaiting arriving. As a young one, my father handed over his turntable (rotel) along with Rotel amplifier. Aiwa tape deck and JVC tuner. Why the hectic I opted for a Crosley Suitcase as my first adult choice escapes me. After seeing product suggestions of Pro-Ject, I instantly aimed at upgrade. Unfortunately, my missus decided to surprise me with a Jam turntable and speakers for a Christmas gift. Instantly recognising the cheap Crosley mechanism and dreaded built in speakers, I knew that I could not make regular use of this set up. The Jam Bluetooth active speakers are okay, but have too much bass. I have waited 3 year before taking my step towards purchase of T1, as not to offend my wife. My vinyl collection is almost at 100 count, and 80% or more have yet to have been played as fear of damage to quality. Finally, I start my own adult build, will never meet my late father's Delphi Oracle with Kef speakers set up, but I aim to build an impressive entry-mid level sound system to enjoy.
I have played my records on a vintage turn table for years. One day I have bought a Carbon Evo . Now I really can listening music ! Best buy I have ever made.
I am running a Audio technica LPW30 but I really want to upgrade to a Project debute Pro S. My setup rn really just consists of the turntable and a bluetooth speaker. Not the best sound quality sadly…
Treated myself to one of these turntables recently, love the basic design but found a couple of problems using it. The on/off switch is underneath and using it will push the turntable to one side. Lifting the cover will lift the front of the turntable. I've heard that by using 3 mounting feet is ideal, but i found it made the table very unstable. Most of these issues can be solved by using a heavier or better quality wood for the turntable carcase.
how do you manage that? I admit the switch on my (carbon Evo) is stiff, but i don't just use a finger on the switch my thumb is on the top of the plinth so the table doesn't move. I don't have any issues lifting the cover so your must either be very stiff, or you're applying more force. Stability issues I don't have either unless you lean on the rear of the table where the single leg is. 3 legs is theoretically the most stable design, it will sit on any surface no matter how uneven that surface is, which is why you see this employed on many high end tables, and many barstools too ;-)
The problem with the lifting of the cover and the stiff hinges also occurred on my essential 3. But it gets better after time. I really love my essential 3. Only issue i really had is that it took me a while to figure out that the usb output would only work if u used thr built in pre-amp. Since i connect my table to an old amp with phono in, i had switched the onboard pre-amp off. Thus disabling the usb. Now i know this, i will switch the pre-amp on whenever i want to make a digital copy of a record, and off afterwards. The switch is on the back of the connection box making it a bit difficult to reach.
I bought a Pro-ject 1. 2 brand new in 1995 (I think 😂) it was an entry level machine made by Pro-ject and it's still going strong and still sound's fantastic.
I've had one since '98. Got rid of the Oyster cartridge right away, though. The Grado Red has sounded really good, though I'm sure others would as well. The X1 and a few others have tempted me, but I've decided I'll stick with it until it refuses to stick with me.
@@jk25653 I have the T1, phono sb model as it has the integrated phono stage and I like it all contained in one box. Piano black finish, though the walnut almost happened. I don’t have any other tables to compare it to, but to my ears it has a very pleasing sound and I love how easy it was to put together and start spinning records straight away. Very pleased with the purchase and the price.
My EVO I did not like much when I first got it but the more I listen to it the more I like it great sound just wish you had stayed with the ortofon 2 red
I have a Pro- Ject acrylic, great table with a Hana eh cartridge, these tables need a turntable platform under them to isolate them to sound there best as there is no suspension.
I have the pro-ject essential 3. Hooked up to a decent headphone amp with Philips X2hr headphones. When the unit is turned on and amp volume at max (no record playing), it is completely silent. No hum or rumble!
Except the A1 which...was a return for replacement for me. The platter came wobbly, the mechanism clunky and the worst parasitic noise in the speakers when in phono mode my guess because the platter rubs against the central spindle (not a great design). Quality control? Hope the replacement will be better or it's a return for me😑
I recently purchased a Pro-ject X1. I'd like to replace the standard sub platter with Pro-ject's replacement aluminum sub platter. Pro-ject does make them for their X1-X2 models. Unfortunately, I can't find any Pro-ject dealer in the USA that sells them, or even has them in their inventory. Can anyone HELP?
I'm not talking about the acrylic platter (no problems with that).. I'm talking about the plastic sub-platter and the fact that there is an upgrade to aluminum for the debut and classic range but not for x1
I want to buy a Debut Carbon EVO and a stand for it and I absolutely love the stand that is shown in this video ( stand is shown at 0:35 ) could you please tell me where to get one
If your amp has a phono input, you're fine. If the turntable has a high level output, you're fine too. Otherwise, you'll have to get a separate phono preamplifier (because of the very weak signal coming from the turntable)
Looking to buy my first turntable and have been eyeballing the Essential 3, but the wow & flutter seem quite high when compared to for example a Debut Carbon. Is this anything to be worried about in terms of the playback quality of my records?
As the Debut Carbon EVO features better materials like a heavy steel platter for example we were able to reach better measurements. The Debut Carbon EVO is the more advanced model compared to the Essential, but also the Essential is still a great turntable & perfect for beginners.
I am thinking about buying a debut carbon evo, and am wondering what the best options would to if I want to listen to it via hesdphones, but might upgrade to speakers later...?
if you want to buy speakers in the future, a MaiA S2 or DS2 would be a great choice for example. Both have a headphone output on the front & depending on the speakers & features you need you can choose between these two.
@@renelesch6244 the Debut Carbon EVO has no built in phono preamp, but both, MaiA S2 and DS2, have one included. For sure, you could also go for a tube amp like the Tube Box S2 if you like the tube sound.
You won't find hi end (over 2000€) or mid range (1000-2000€) turn tables with direct drive. At least those intended for pure sound quality because the direct drive causes vibrations, and thats the main goal of these turn tables, get rid of all that causes vibrations. Normally are Dj turntables and entry level the ones with direct drive. cheers.
@@Thryym You should do a bit more research before posting, because that's incorrect. For example VPI, which is a well know audiophile brand makes direct drive turntables as their highest-end turntables, like the VPI HW-40. Swedish Analog Technology, which is also a well known high-end manufacturer makes a direct drive turntable called the SAT XD1. The SAT XD1 uses the same direct drive motor as in the Technics SL-1000R, which is considered to be one of the most accurate turntables made in the past 40 years. A very similar motor is used for the Technics SL-1200G which is an audiophile version of the regular SL-1200 models. Clearaudio is also a well respected brand in the audiophile scene and their best turntable is the Clearaudio Statement - also a direct drive. I can call at least 3 more examples, just from the top of my mind, like the Brinkmann Bardo, Grand Prix Audio Monaco, Thorens TD402DD... You'll probably be able to find many, many more examples of high-end DD turntables.
i would pass on Project because , i want a metal arm, i want adjustable scale showing grams and no hanging anti skate also they come with cheap stylus weight scale
My partner and I are in the market for a new turntable and we have our eyes on the Debut Carbon Evo, hence, why we watched this video. Very informative, until at 5.04 you state that all customers are male! Poor show - it is 2021 not 1971!
"Designed in Austria, made in Europe". When your sayin' this on the way you've said it, it sounds like Austria isn't a part of Europe.. Need a map Europe?
We currently have two production facilities: One in the Czech Republic and one in Slovakia. As the design, production, assembly, quality control etc. is split up to 3 countries (Austria, Czech Republic & Slovakia) our products are "Made in Europe".
IMO vinyl format its not worth it because:1.the cost it is stupid high for the sound quality 2.sound quality its worse in every mode to cd 3.its an inconvenience for listening to music at a good quality,you need to buy tens and thousands of accessories for maintenance and they scratch and get dirty very easy.To put in perspective with cd,that is much cheaper,better sound quality with an average setup that contains a cd player with some active speakers,that from my experience sounds better than a 500$ turntable with external pre-amp and reciver with passive speakers.I just want it to put my two cents on this debate,but choose want do you want,my choice majors the fact that I don't have the money to spent on an audiophile setup with hundreds of records,but at least I support my favorite artists with the cds I buy.
Buy yourself an affordable Pro ject with a built in phono stage. Plug it in to your active speakers and listen. More inconvenient than cd but more involving.
@@nachocheese1934 Yes new I80g vinyl is expensive but here in the UK when cds became the norm they were about £15.00! So after 30 odd years the price of records ain't that bad at about £20. I have a large collection of both cds and Lps. Lps are now outselling cds!
CDs were hyped as more durable, but sad truth is they scratch so much easier than LPs, and then you have to polish them, just to play them! Otherwise, the tray spits them out! CD vs LP price depends on where you live. CD players also do not last long! I had all of them crap out on me in the last 30 years, none lasted more than about 8 years, a few only 6 months, while several of my turntables were made close to 50 years ago! Nowadays I use my refurb computers to copy my CDs onto hard drive, and they play quietly, which I cannot say about CD players, which often make nasty noises! I still buy CDs, but for listening, the 1:1 copy on computer is more convenient :) My LPs save all that work!
![เปิดใจ พี่ญา คนรุม หลังทัวร์ลง หนักสุดในชีวิต!! l [Nickynachat]](http://i.ytimg.com/vi/2-OJZRtclro/mqdefault.jpg)
![POLYCAT - ข้อความรูปยิ้ม [Music Video]](http://i.ytimg.com/vi/lBhIgPGCgbI/mqdefault.jpg)
I've just ordered my Pro-ject T1. Eagerly awaiting arriving. As a young one, my father handed over his turntable (rotel) along with Rotel amplifier. Aiwa tape deck and JVC tuner.
Why the hectic I opted for a Crosley Suitcase as my first adult choice escapes me.
After seeing product suggestions of Pro-Ject, I instantly aimed at upgrade. Unfortunately, my missus decided to surprise me with a Jam turntable and speakers for a Christmas gift.
Instantly recognising the cheap Crosley mechanism and dreaded built in speakers, I knew that I could not make regular use of this set up. The Jam Bluetooth active speakers are okay, but have too much bass.
I have waited 3 year before taking my step towards purchase of T1, as not to offend my wife. My vinyl collection is almost at 100 count, and 80% or more have yet to have been played as fear of damage to quality.
Finally, I start my own adult build, will never meet my late father's Delphi Oracle with Kef speakers set up, but I aim to build an impressive entry-mid level sound system to enjoy.
I have played my records on a vintage turn table for years. One day I have bought a Carbon Evo .
Now I really can listening music !
Best buy I have ever made.
Bought my project turntable 18 yrs ago and still sounds great
Started with a debut carbon. Donated to my son when I got myself the Debut Evo model. Fantastic record player.
Love mine. The fact that it is designed and made in Europe as my watches are as important as the quality. Thanks
Buying a Carbon Evo has been an amazing decision. Such a quality piece of technology and machinery
I am running a Audio technica LPW30 but I really want to upgrade to a Project debute Pro S. My setup rn really just consists of the turntable and a bluetooth speaker. Not the best sound quality sadly…
Treated myself to one of these turntables recently, love the basic design but found a couple of problems using it. The on/off switch is underneath and using it will push the turntable to one side. Lifting the cover will lift the front of the turntable. I've heard that by using 3 mounting feet is ideal, but i found it made the table very unstable. Most of these issues can be solved by using a heavier or better quality wood for the turntable carcase.
which one are you talking about?
how do you manage that? I admit the switch on my (carbon Evo) is stiff, but i don't just use a finger on the switch my thumb is on the top of the plinth so the table doesn't move. I don't have any issues lifting the cover so your must either be very stiff, or you're applying more force. Stability issues I don't have either unless you lean on the rear of the table where the single leg is. 3 legs is theoretically the most stable design, it will sit on any surface no matter how uneven that surface is, which is why you see this employed on many high end tables, and many barstools too ;-)
The problem with the lifting of the cover and the stiff hinges also occurred on my essential 3. But it gets better after time. I really love my essential 3. Only issue i really had is that it took me a while to figure out that the usb output would only work if u used thr built in pre-amp. Since i connect my table to an old amp with phono in, i had switched the onboard pre-amp off. Thus disabling the usb. Now i know this, i will switch the pre-amp on whenever i want to make a digital copy of a record, and off afterwards. The switch is on the back of the connection box making it a bit difficult to reach.
I bought a Pro-ject 1. 2 brand new in 1995 (I think 😂) it was an entry level machine made by Pro-ject and it's still going strong and still sound's fantastic.
I've had one since '98. Got rid of the Oyster cartridge right away, though. The Grado Red has sounded really good, though I'm sure others would as well. The X1 and a few others have tempted me, but I've decided I'll stick with it until it refuses to stick with me.
@@leonardblush2557 mine came with an Ortofon cassette.
The best decision I made last year was buying a Pro-Ject turntable.
Me too :)
Which Pro-Ject did you purchase? I cannot decide which Debut Carbon to get! I really like the Evo's matt green finish, but I don't know!
@@jk25653 I have the T1, phono sb model as it has the integrated phono stage and I like it all contained in one box. Piano black finish, though the walnut almost happened. I don’t have any other tables to compare it to, but to my ears it has a very pleasing sound and I love how easy it was to put together and start spinning records straight away. Very pleased with the purchase and the price.
@@jk25653 We have the Debut Carbon Evo in matt blue ...
@@darkblueturbo I'm glad you are enjoying your experience!
Happy owner of a project 2xperience sb dc with grado gold 3. Fantastic.
I just got the X1, Looks great and sounds great!
i have your signature 12 and i love it i have had it since i was 17 im now 20 it has held up from move to move
Great! Happy to hear that. What else do you have?
My EVO I did not like much when I first got it but the more I listen to it the more I like it great sound just wish you had stayed with the ortofon 2 red
0:00:16. Number one: the stop feature at the end of the record would lengthen the performance of the stylus!
im' sold... my 1st turntable will be a pro-ject cn't wait
I have a Pro- Ject acrylic, great table with a Hana eh cartridge, these tables need a turntable platform under them to isolate them to sound there best as there is no suspension.
I just ordered an X1 🇮🇪
I am so happy for my new T1 Phono SB! Cheers!
Warning! This thing is silent when a record is not playing. I have accidentally left it on more than once. Awesome product
Nothing silent about 50db of rumble and motor hum.
@@DJWolves97 Yeah, if the needle is not on the record, you hear nothing. Motor completely silent.
@@abefroman764 Get full range speakers and a subwoofer and you will hear what I’m talking about. Which model do you have?
I have the pro-ject essential 3. Hooked up to a decent headphone amp with Philips X2hr headphones. When the unit is turned on and amp volume at max (no record playing), it is completely silent. No hum or rumble!
Imma get one of these one day
Except the A1 which...was a return for replacement for me. The platter came wobbly, the mechanism clunky and the worst parasitic noise in the speakers when in phono mode my guess because the platter rubs against the central spindle (not a great design). Quality control? Hope the replacement will be better or it's a return for me😑
I want to buy the new Debut Alu Subplatter. When will it be available?
I recently purchased a Pro-ject X1. I'd like to replace the standard sub platter with Pro-ject's replacement aluminum sub platter. Pro-ject does make them for their X1-X2 models. Unfortunately, I can't find any Pro-ject dealer in the USA that sells them, or even has them in their inventory. Can anyone HELP?
i wonder if there will come a aluminum subplatter for the x1? or if i could use the ones build for the debut range?
I'm not talking about the acrylic platter (no problems with that).. I'm talking about the plastic sub-platter and the fact that there is an upgrade to aluminum for the debut and classic range but not for x1
I have the elemental and the only thing I hate about it is the rubber band
Why do you hate it?
What Pro-Ject turntables would be in the budget of 250$ if there are any, thanks!
Pro-ject Primary E. Factory set, but replacing a cartridge with another one would be a little harder than on more expensive models.
@@peterregorsek1504 I'm currently saving enough money to hopefully get a debut carbon, or an Esprit!
Hi. Just purchased a primary e. What else do I need to buy in order to listen to music?
A pair of powered speakers and some records?
I want to buy a Debut Carbon EVO and a stand for it and I absolutely love the stand that is shown in this video ( stand is shown at 0:35 ) could you please tell me where to get one
Sonically it's not a good stand cabinet too thin too big what are you using at the moment
Turntable, amp, speaker that's it?
Help me Pro-Ject I'm a little confused by your website(sorry I'm a novice) and no shops during lockdown!
If your amp has a phono input, you're fine. If the turntable has a high level output, you're fine too. Otherwise, you'll have to get a separate phono preamplifier (because of the very weak signal coming from the turntable)
Are the tables in the RPM line being updated? I have an RPM 5. I think I'd like to move to a 5 Carbon or 9.
There are currently no new RPM models planned.
I can recommend the RPM5 Carbon which comes with the project 9CC Evolution arm and Ortofon Quintet Black stylus, sounds absolutely amazing 👍
Looking to buy my first turntable and have been eyeballing the Essential 3, but the wow & flutter seem quite high when compared to for example a Debut Carbon. Is this anything to be worried about in terms of the playback quality of my records?
As the Debut Carbon EVO features better materials like a heavy steel platter for example we were able to reach better measurements. The Debut Carbon EVO is the more advanced model compared to the Essential, but also the Essential is still a great turntable & perfect for beginners.
Buy a vintage Technics and you won’t be sorry.
I am thinking about buying a debut carbon evo, and am wondering what the best options would to if I want to listen to it via hesdphones, but might upgrade to speakers later...?
if you want to buy speakers in the future, a MaiA S2 or DS2 would be a great choice for example. Both have a headphone output on the front & depending on the speakers & features you need you can choose between these two.
@@Projectaudiosystems thank, that helps... Would you suggest using an external phone preamp, or use the integrated one in the beginning?
@@renelesch6244 the Debut Carbon EVO has no built in phono preamp, but both, MaiA S2 and DS2, have one included. For sure, you could also go for a tube amp like the Tube Box S2 if you like the tube sound.
I am waiting miiiine
No direct drive turntables?
You won't find hi end (over 2000€) or mid range (1000-2000€) turn tables with direct drive. At least those intended for pure sound quality because the direct drive causes vibrations, and thats the main goal of these turn tables, get rid of all that causes vibrations. Normally are Dj turntables and entry level the ones with direct drive. cheers.
@@Thryym You should do a bit more research before posting, because that's incorrect.
For example VPI, which is a well know audiophile brand makes direct drive turntables as their highest-end turntables, like the VPI HW-40.
Swedish Analog Technology, which is also a well known high-end manufacturer makes a direct drive turntable called the SAT XD1.
The SAT XD1 uses the same direct drive motor as in the Technics SL-1000R, which is considered to be one of the most accurate turntables made in the past 40 years.
A very similar motor is used for the Technics SL-1200G which is an audiophile version of the regular SL-1200 models.
Clearaudio is also a well respected brand in the audiophile scene and their best turntable is the Clearaudio Statement - also a direct drive.
I can call at least 3 more examples, just from the top of my mind, like the Brinkmann Bardo, Grand Prix Audio Monaco, Thorens TD402DD...
You'll probably be able to find many, many more examples of high-end DD turntables.
@@QoraxAudio Thank you for increasing my knowledge.
@@Thryym You're welcome 👍
i would pass on Project because , i want a metal arm, i want adjustable scale showing grams and no hanging anti skate also they come with cheap stylus weight scale
#11. No dust cover.
Pro-Ject tables do come with dust covers, except the "designer" RPM, Elemental, and VT-E vertical players!
My partner and I are in the market for a new turntable and we have our eyes on the Debut Carbon Evo, hence, why we watched this video. Very informative, until at 5.04 you state that all customers are male! Poor show - it is 2021 not 1971!
Better listen first. Customer, not customers. Try again, bigot.
Why does he pronounce project at the beginning and then as pro-ject? I do not trust him.
"Designed in Austria, made in Europe".
When your sayin' this on the way you've said it, it sounds like Austria isn't a part of Europe..
Need a map Europe?
We currently have two production facilities: One in the Czech Republic and one in Slovakia. As the design, production, assembly, quality control etc. is split up to 3 countries (Austria, Czech Republic & Slovakia) our products are "Made in Europe".
Some people are of the belief that Pro-Ject is moving its production facilities to Germany. Hoping that isn't the case.
IMO vinyl format its not worth it because:1.the cost it is stupid high for the sound quality 2.sound quality its worse in every mode to cd 3.its an inconvenience for listening to music at a good quality,you need to buy tens and thousands of accessories for maintenance and they scratch and get dirty very easy.To put in perspective with cd,that is much cheaper,better sound quality with an average setup that contains a cd player with some active speakers,that from my experience sounds better than a 500$ turntable with external pre-amp and reciver with passive speakers.I just want it to put my two cents on this debate,but choose want do you want,my choice majors the fact that I don't have the money to spent on an audiophile setup with hundreds of records,but at least I support my favorite artists with the cds I buy.
Buy yourself an affordable Pro ject with a built in phono stage. Plug it in to your active speakers and listen. More inconvenient than cd but more involving.
@Macfie but cds are more cheaper,like a good album on vinyl Is like plus 40 dollars and on cd under 10 dollars
@@nachocheese1934 Yes new I80g vinyl is expensive but here in the UK when cds became the norm they were about £15.00! So after 30 odd years the price of records ain't that bad at about £20. I have a large collection of both cds and Lps. Lps are now outselling cds!
@Macfie I live in Romania and the prices are going nuts,on LPS,but cds remain the same
CDs were hyped as more durable, but sad truth is they scratch so much easier than LPs, and then you have to polish them, just to play them! Otherwise, the tray spits them out! CD vs LP price depends on where you live. CD players also do not last long! I had all of them crap out on me in the last 30 years, none lasted more than about 8 years, a few only 6 months, while several of my turntables were made close to 50 years ago! Nowadays I use my refurb computers to copy my CDs onto hard drive, and they play quietly, which I cannot say about CD players, which often make nasty noises! I still buy CDs, but for listening, the 1:1 copy on computer is more convenient :)
My LPs save all that work!
Your turntable motors SUCK take notes from Technics before you charge $600 or even $1000 for a noisy, motor-hum ridden deck.