2008- 2012 Honda Accord Front Bumper Removal How to Remove Replace Install Sedan 4 door

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ธ.ค. 2024

ความคิดเห็น • 43

  • @askincreative518
    @askincreative518 5 ปีที่แล้ว +6

    Everything in this video works. Only thing I'd add is to be careful about closing the hood once the bumper is off. If you drop down the hood, the latch will not work and you'll have to pop the hood (as normal) from inside the car. Then the latch will work again. The clips linked below work great. Anticipate you'll break - and have to replace - about half the clips you pull out. They become brittle over time. Otherwise the video was a huge help. Thanks!

    • @christopherjc54
      @christopherjc54 3 ปีที่แล้ว

      it's not the bumper that affects the latch, it's the force with which you close it. give it a solid drop from higher than normal and it should close properly with or without the bumper

  • @csifreak101jf
    @csifreak101jf ปีที่แล้ว +1

    Specs that I found useful to know before and during my bumper removal (I have a 2011 Honda Accord):
    1. Number of bottom bumper clips = 10
    2. Number of bumper screws = 2
    3. Number of upper shield clips = 7
    4. Clip measurements: Full Diameter of top = 20 mm; Stem Length = 13 mm, Diameter of clip/hole = 10 mm
    Hope this helps someone when they are looking to buy new clips (called retainer clips in stores or online), and when changing the clips out to know how many should go back on.

    • @crazijay4531
      @crazijay4531 10 หลายเดือนก่อน

      What’s that black thing when he removed the bumper on the driver side

  • @csifreak101jf
    @csifreak101jf ปีที่แล้ว

    This video helped so much. Thanks! I had to replace my windshield washer pump and needed to take the front bumper off to access it. Now I know how to do both things!
    An issue I ran into though was the 2nd bumper screw wasn't feeling resistance when I screwed it back in. I'm not sure why it's not grabbing anything. I may need to take a closer look at the fender cover and see why it's not gripping.

  • @philjohnson726
    @philjohnson726 ปีที่แล้ว

    Thanks!

  • @pp-qq5pi
    @pp-qq5pi 2 ปีที่แล้ว +4

    Steps are precised, short and simple. I appreciate there is no intro before the clip, thanks.

  • @dantemiles8198
    @dantemiles8198 3 ปีที่แล้ว +2

    Hit and run tonight, caught the driver.. (:
    Will be making this a project for next Sunday

  • @ShivPatel-hi2wl
    @ShivPatel-hi2wl 4 ปีที่แล้ว +2

    Can you find replacement clips

  • @clarklarewjones
    @clarklarewjones 2 ปีที่แล้ว

    I’m trying to find that Phillips screw to put back into the bumper, which one is it? Thanks

  • @Jjjj.661
    @Jjjj.661 4 ปีที่แล้ว

    Where you get prepainted grey one like that it says prime but not colored??

  • @106766298
    @106766298 4 ปีที่แล้ว +1

    Do you have any links/recommendations to other sellers? The ones in the links aren't available. Thanks!

  • @kantiusaify
    @kantiusaify 4 ปีที่แล้ว +2

    Absolutely great video with detailed instruction. Many Thanks for a wonderful job !!

  • @morad11109
    @morad11109 2 ปีที่แล้ว

    How i know the clips size is it 10 mm or something else? Thanks

  • @dmcresins
    @dmcresins ปีที่แล้ว

    Cheers, man. You made changing my fenders / wings so easy! Appreciate it, 👍 ☘️

  • @andreyv1
    @andreyv1 5 ปีที่แล้ว +9

    you gotta show how to install the new one in these videos too

    • @christopherjc54
      @christopherjc54 3 ปีที่แล้ว +1

      literally the same thing in reverse

    • @clarklarewjones
      @clarklarewjones 2 ปีที่แล้ว +1

      It’s not exactly the same in reverse, I can’t get that screw in

    • @mf897s
      @mf897s ปีที่แล้ว

      ⁠@@clarklarewjones: Also, buy some clips, because some (most of them) will break during their removal.
      Not any clips. Get part number from honda dealer. Then buy it on line or from the dealer.

  • @zomni1
    @zomni1 7 หลายเดือนก่อน

    You’re the man. Wish me luck

  • @mirandagalary8566
    @mirandagalary8566 4 ปีที่แล้ว +1

    Where the links at??

  • @x86DualBooter
    @x86DualBooter 3 ปีที่แล้ว

    This won't work on the coupe?

  • @brendanodonnell6419
    @brendanodonnell6419 4 ปีที่แล้ว

    Great job brother - perfect . Now I don’t have to try the silliness of working in the liner inserts.

  • @glennbrown9178
    @glennbrown9178 2 ปีที่แล้ว +2

    Well done!

  • @henryfernandez299
    @henryfernandez299 4 ปีที่แล้ว

    I have a v4 2012 sedan and will like to put the 2012 v6 bumper on it will it fit?

    • @jakeseidel4566
      @jakeseidel4566 2 ปีที่แล้ว +1

      It doesn't say direct fit but it should fit. They try to list parts for the 2008-2010 like they won't fit a 2011-2012 but they will, notice how the headlights , hoods and fenders fit all 4 years but the front bumper doesn't ? No, they all fit. You can put a 20122 V6 fog light bumper on the 2012 k24 Accord. Nobody talks about this

    • @ramonnunez711
      @ramonnunez711 ปีที่แล้ว

      @@jakeseidel4566 I've been really trying to verify this information before I buy a v6 bumper for my 2.4l. I appreciate your comment 💪🏽

  • @retrolee
    @retrolee 2 ปีที่แล้ว +1

    Great explanation- Thanks!

    • @DIYHonda
      @DIYHonda  2 ปีที่แล้ว

      Glad I could help!

    • @huntergale9884
      @huntergale9884 ปีที่แล้ว

      @@DIYHonda do you know where the tow points are when you remove the front bumper? I have an accord Crosstour and want to install a bull bar or improved recovery hooks

  • @calmpwn
    @calmpwn 2 หลายเดือนก่อน

    thx a lot man

  • @pauld.9347
    @pauld.9347 ปีที่แล้ว

    Thank you. 😊

  • @jcolivera881
    @jcolivera881 4 ปีที่แล้ว

    Where’s the link? I need to replace my front bumper

  • @BrianGregory-b8k
    @BrianGregory-b8k 6 หลายเดือนก่อน

    Can you sale me that one

  • @vergano
    @vergano 5 ปีที่แล้ว +1

    Excellent!! Thanks man!!

  • @majorpayne5289
    @majorpayne5289 3 หลายเดือนก่อน

    👍

  • @ChampagneTheGibbon
    @ChampagneTheGibbon 3 ปีที่แล้ว

    You're the best

  • @jamiebarsby8000
    @jamiebarsby8000 ปีที่แล้ว

    Heys guys would a 2008 Honda accord front bumper fit a 2007 Honda accord
    Please get back to me and would the 2 right side doors fit?

  • @edwinrosales1033
    @edwinrosales1033 2 ปีที่แล้ว

    Can anyone confirm the link still works to order a painted front bumper? Thanks

  • @oliviabad4310
    @oliviabad4310 3 ปีที่แล้ว

    You only showed hot to replace.. I wanted to know how to install

  • @pmag3200
    @pmag3200 5 ปีที่แล้ว

    Thanks home boy...🤣🍺

  • @tonymendez7615
    @tonymendez7615 5 ปีที่แล้ว

    2017 honda accord lx