My OCD really appreciates the way you clean the engine before working on it as well as wrapping the bumper/fenders to protect them from scratches. Also, keeping your parts organized when off the vehicle is amazing. So many other TH-camrs don’t do any of this and it makes me anxious when they work on their cars in filthy conditions.
I’ve been watching you since that V1 CTS V and man I love your work, then as a person, you’re a cool dude, very humble, and calm personality. Looking forward to your progress and achievements
Great and clean job. Just one thing I would add. After cam sprocket work always set them up with your chosen diag equipment. With the official Mercedes diagnosis kit there is a option to do this in the adaptation menu. 😊
As we say in the military attention to detail! And that my friend you absolutely have! There is no greater satisfaction then doing the work yourself. Knowing it’s your car and you want it done right. A job well done. 👍
I did a ton of research to see how many head bolts fail on the early engines by asking dealer techs and independents . The results were common in that failure was rare, like 1 in 100! Also, If a bolt snaps when you try to remove it , it becomes a major major job . For these two reasons I have chosen not to change my head bolts and keep a close eye on coolant level.
exactly! if the old bolts are fine till now, they'll probably stay fine. there's no guarantee that the new bolts will stay fine. probably has to do with some bolts having bad coating
Also took care of this job on my channel for my ML63 AMG along with head bolts and cam buckets using upgraded OEM parts and the 63 Motorsports adjuster plates and hardware. Nice work and great video, cheers to many more smiles in the M156! Subscribed!
I really enjoyed every minute of this video. Very educational and interesting. I am so glad I have found this channel. You pay attention to every detail. This makes you so unique, compared to many other mechanics and shops. Great job Chris.
Just bought 2008 CL 63 same 156 engine, was little worried about it’s condition, this is where I found this video, great job man! Great filming and editing! Smooth af! Thank you for your time.
Hi, I started watching your channel when you started your 69 Camaro since I am doing a 68, but I wanted to let you know I find your work on everything is top notch and usually way beyond my capabilities, but there is something we can all take from them like how neat and organized and thorough you are. Your music taste could use some work 😄, but other than that very impressed.
@@Official_ChrisSullivan Hi , thanks for the gift offer, totally not necessary, and I don’t even know if this is where I send the response but curious and based on you videos it could be something cool.
I love to say you do a great job. I,like a lot of us have been reading, watching everything about car's/trucks my whole life so I can see real quick if a person has a good way to explain. You do a great job and I love what your working on.
Dude you are awesome. You have so much attention to detail for everything. I hope to one day own a garage like yours with a lift and all those awesome cars you have
I'll be tackling cam adjusters on my '11 soon. Always appreciate how thorough you are. How about some affiliate links to the items used in each job like timing tools, plastic wrap, fluids etc? Interested in supporting future content.
Amazing how quiet it is after that work! Next items you may want to do are new injectors, PCV valve, and pulleys. They factory plastic pulleys seize around 60-80k. I replaced my PCV at 70k and it wasn't broken, but felt soft compared to the new one.
@@OGYELLOW I think I replaced mine around 70k as well with the BOSCH ones. I was surprised how dirty the old ones were and I've used nothing but 93 octane in mine.
@FirearmTutorials me too! Mine were filthy although no idea how it was treated before me. I pulled 100k injectors from a vq35hr and they were spotless. Granted a couple hundred less hp
I did this work (just the cam adjuster rebuild though) on my C63 few months ago and a relearn was necessary. After about a month of driving I started getting misfires and cam out of position codes. After clearing the codes using a normal scanner they came back a few clicks later. Since the relearn I've had no codes but I also have not driven it much (stored for winter). I hope you bought new cam shaft bolts since the original ones are one time use only. Great video! Keep us posted.
I have 09 sl63 when I bought 5.5 years ago. I read all about the head bolts and after a year I had the first low coolant light. Thank goodness I bought the aftermarket warranty and they covered the headbolts, suspension pump and front suspension before the end of the 3 years. I change the oil frequently but thin that I will have to do the cam tensioners soon - thanks for giving me an insight on what it entails
Great video! I just picked up a 2010 C63 with low miles as a fun summer car.. I can't find any records of the work being done.. so going to do the head bolts and cam mods so I can have some peace of mind.. You vid will be on full screen and I take it all apart! Cheers!
Great video. Getting ready to pick up a 507, just under 80K miles. Wanting to learn more about maintenance on M156. Hopefully I’m not getting over my head with the car. Great video! Thanks for sharing.
In my opinion as a MB tech the M156 is definitely one of the more approachable engines for enthusiasts to work on. Good luck on the sale for that 507, I still remember the first time I drove a 507 C63. It was badass and roudy!
As a mechanical engineer... softer plate or softer pin.. I'm going with a softer pin if it means the assembly can still function in the event that the plate wears out. Seems to function fine, minus the annoying rattle at start-up. Amazing what is charged for aftermarket plates but this is a 100K+ car new, so.. maybe not so much; everything comes at a premium $ with these cars. Nice video detailing the replacement process, thanks!
yeah. I wonder what's the problem with a little rattling. the vanes inside seem a lot stronger and I doubt it would break easily. most manufacturers don't use pins; I think they use a spring to dampen the lash
I like how you start with cleaning… so frustrating to watch people working on dirty cars and engine bays… its not just bad practice, the damage from dirt is real both to bodywork and engine internals is real. Also its just nicer wot work on clean stuff.
You are much braver than I was! I pulled the heads and installed ARP headstuds instead of the updated head bolts. I added the SLS buckets and billet idler pulley set from Weistec since I was there. Great job on your part, your engine looks immaculate! Recently I put in new fuel injectors and noticed my intake manifold was disintegrating…so I had to get a new one. Keep an eye on that!
@ I also have a 2010, but a W221. Bought it in 2015 and loved every minute of it! No, I didnt pull the motor and I said a lot of prayers after it was all put back. I ran all the software checks and it started on the first try. I also run stock except for a cold air induction kit with AfE that I got from a local guy I met at an AMG meetup here in Houston. Ultimate Performance. So far, I’ve replaced the crankcase breather twice from those two projects I mentioned in the first post, both engine mounts, and front camshaft cover seals for an oil leak. Replacing the manifold was also a good idea, since all those electrical connectors were spent and barely hanging on. Now the manifold looks just like yours! Haha
One of the few channels that have my attention the whole video. The content is thorough, your knowledge seems endless, and the cars are clean. Have you ever discussed what you do for work? Interested to know.
Thanks for sharing this comprehensive guide. I'm considering buying a 2014 model so hopefully not too many of those issues exist on it but I now have all the necessary info to do the work if required. 47:00 Great sense of satisfaction having that purr like a kitten.
Great video Chris! I did this exact same job a year ago on my C63, even did the same marks on the phasers. I was wondering why you didn't change the lifters in the first part of the video, but then saw you changed your mind at the end. Thanks for some great content.
i’m considering buying a 60k mile s63 2010 and the only worry i have on it is this. I’ve done my timing belt on my current lexus but this seems pretty straightforward. Any input on the car and the engine project.
@@maxmiller3719 everything went smooth, if you have any other experience with working on a cars engine you should be okay. Just be patient and do lots of research.
Did all of that to my 2009 E63 two years ago when it had 50k miles on it. Initial complaint was high idle speed with no codes. Removed intake to find corroded throttle support plate which I replaced with the aftermarket aluminum one. While in there, bead blasted bottom cover and painted with aircraft primer. Next, noticed oil leakage (tiny bit) from the valve covers, so removed those plus the front adjuster covers to replace those seals. Again while in there, did the head bolts which looked exactly like yours, and wondered why I bothered. Noticed some distress to a few of the lifters, so replaced all those too. Cams looked fine. Adjusters had a bit of locking pin hole wear on the intakes; exhausts looked perfect, so reassembled those and reused. Also replaced PCV valve. One note of caution: washing the engine lets water get under the intake manifold and causes corrosion of the uncoated magnesium. There are foam pads between the manifold and valley which trap the water.
Awesome content. Super clean shop/garage and mad props for being so thorough. I’m a e90 m3 owner and was researching some stuff to potentially switch to the m156 e63. Glad I found your channel and feel leaps better of switching now.
330k miles on my m156.....did the head bolts one at a time 175k miles ago....did the pin flip at the same time as the headbolts....had the noise come back about 15k miles ago and ordered the plates from 63motorsports and they were AWESOME!!!!!! Once you understand how it works the m156 is SUCH an awesome engine and is also great to work on
@@ChrisSullivan69 also, if you were to have the old head bolts magnafluxed i can almost GUARANTEE that you would find that at least 4 of them were cracked just below the head....if you wire brush them you can probably see the cracks with the naked eye....
@@ChrisSullivan69 the cam sensor relearn is NOT necessarily required, i did not do it when i first did my headbolts and everything seemed fine after the fact. However, i will say that in the meantime i have bought a new diag system that allows me to do all of the relearns and when i did the adjuster plates i did the relearn and it DID feel a lot stronger, but may have just been the adjusters able to hold accurate timing again. and its easier with the scanner but resetting the trans adaptives in these cars REALLY wakes them back up.....shut it off, KEEP THE DOORS CLOSED, press start 2 times, press the accelerator pedal all the way to the floor and hold it, press start so that ignition turns off....keep holding the gas to the floor for 10sec after turning off ignition.....let go of gas pedal....now sit there for 3min, do not open the door or anything, just sit there....after 3 minutes have passed open and shut the drivers door and youre done(Mercs see the driver door opening and closing as part of the ignition/drive cycle, as in when the ecu sees the driver door open and close after the ignition turns off only THEN does it see that drive cycle as being complete)
@jp taylor good to know. Car has been driving perfect without it but I've got an appointment at the dealer to have it done just to be sure. It does call for it in WIS. I'll keep the trans relearn in mind!
Killer - I've heard of the MKs doing close to 500K but not a M156, yet. Our 07 E63 just turned 110K so that is good to hear. We had to do a disassembly at 100k for carbon-plugged air injection ports and did the head bolts, etc while in there - running good now, I absolutely love this motor - plan to keep it as long as it makes sense.
Good to know about the cam adjuster plates. I have a 2014 C63 almost 100k on it now. So I'll have to start lookin into that place in Canada. Thanks for the info 🤘🤘
Getting ready to do this on my 09 E63. 242k on her and figured I'd do this as well as the intake belly plate issue and crankcase breather valve. As far as I know original headbolts. Bought 1/2016 with 82k. Great video...subscribed!
Is that 242k miles or kilometers? I’m at 120 k miles with my m156. Of note : The dealers and merc specialists told me that head bolt issues are rare .. like 1 in 100 , so I’ve chosen not to change my head bolts because if one snaps off it becomes a major major job ...
@@highdefp-rm7zg 242,000 miles. I've never had any coolant issues so yeah I'm leaving well enough alone with those. I may be buying new camshaft followers too depending on what shape they are in.
@@highdefp-rm7zg Thats in miles. Replacing the radiator currently. Just replaced the water pump, upper/lower radiator hoses and serpentine system last summer.
Great work and video. A bit of constructive criticism… The only thing I would have done differently of this was mine is replaced the oil prior to start up once you knew you were changing the lifters, then do another change once the engine has heat cycled a couple of times as the flush. Reason is the cam lobes and lifters have very high contact pressures, the most extreme in the engine, the new oil should contain high levels of ZDDP, would help save the cam and lifter surface of wear at this critical bed in time, also fresh oil helps the lifters pump up quicker which again can be a cause of damage due to the large clearances hammering the cams and lifters.
Great vid!! Next time throw the lifters into a tray of oil and make sure they are all submerged for about an hour. Self bleed any air in them that would cause it to clatter.
Watched thew above video. When cleaning or replacing your camshaft phasers and/ or replacing your vvt solenoids, the vehicle has to relearn the system, or the result is misfires. Using a scanner/programmer do a factory reset to factory setting. Put the vehicle in relearn for camshaft adaptation. It will walk you through the procedure. You will have to raise the vehicle to 3000k rpm for 3 minutes and it will notify you when the test is completed. That is the norms on almost every E-class Mercedes that uses cam-phases (aka VVT adjusters) and VVT actuators (aka magnets) solenoids. Hoping this is helpful in resolving issue. Recommend using STAR scan tool or Autel Maxxis.
Man making me miss my 12 cls550, i had k&n filters, airbox spacer kit, vrp charge pipes, exhaust and tune. Man that car was so sexy and fast no other motor has that mercedes exhaust note. You have yours looking sexy thats a nice car
Just bought a 2009 CL63 AMG a couple months ago with 60k miles. I was pleasantly surprised to find a Rentech carbon fiber airbox under the hood. Called Rentech in Florida with my VIN # and they told me they had worked on the car back in 2013. Upgraded airbox, throttle body, headers and a ECU tune. $20k in upgrades on top of the $155k purchase price. Got a fun car now with 571hp and 533ft/lbs of torque. I bought it for $30k from a Buick dealership that didn't know what they had. Black on black, no accidents, extremely clean, like new. Love the CL63!
You have my upmost respect 🫡 the detail and care of your workmanship is superb. Harbor freight has definitely come a long way with their tool selection . I know cause I have a few that I use professionally , their icon tools are top notch . Quin makes a tourqe wrech similar to your half inch drive . They make a 3/8 drive as well . I would look into it and it’s great quality . I was thinking about an e63 but was wondering about the timing , common engine issues and came across this video . Glad I watched …! Thanks again !
Chris just came across your channel. Great stuff man. Love a the content. I love that you your not afraid of any project, German, ford, and GM of course. I am a BMW, GM guy and have a built E90 I use for tracks and general rippin around Cape Cod my daily is a 2018 340i Xdrive and a 2006 GMC Sierra 4.8 L both of those are stock except the 340Xi has a Burger JB4 tuner which took the stock B58 322 HP to 400 HP on pumped gas. Fun car. Anyway man love your stuff. Keep the video's comin, love your Channel. Happy Holidays. Chris D.
My brother did his pre-emptively on a CL63 after a long trip consumed a small amount of coolant. One bolt came out with NO resistance cos the head was coming away from the bolt. I'd already traded my C63 on a B7 RS4 to a dealer (telling him about the bolt problem) cos in NZ every M156 auction pre 2012 had "done the head bolts yet mate?" questions by people on a public service campaign or something. I'd disclose it anyway but nobody would buy it. *The Mercedes dealer said we have to wait til they fail (they fixed one that hydrauliced and bent a rod) cos they made our cars WORTHLESS.*
Great cars are kept running that way by a meticulous mechanic. I'm glad I found another out there like myself, just wish I had the bankroll to support the habit.
Hey Chris, at 23:22 when you are re-assembling the cam adjuster, did you re-use the factory bolts? And what ft-lb did you torque them to? I have found info that states to torque to 11ft-lb, then go back to 16ft-lb all around. Is that accurate?
Nice video. Nice E63. Nice job. Just saying that that you have to do the head bolts, lifters, and cam adjusters sounds very complicated but your process simplified the project.
You have one of the best channels on TH-cam in my opinion
That ain't NO LIE!! 💯👍
Thanks man! Appreciate the support
I second that!!
@@ChrisSullivan69 💪🏽‼️Love how you actually finish the cars you start and the cars come out great
I 3rd that!
My OCD really appreciates the way you clean the engine before working on it as well as wrapping the bumper/fenders to protect them from scratches. Also, keeping your parts organized when off the vehicle is amazing. So many other TH-camrs don’t do any of this and it makes me anxious when they work on their cars in filthy conditions.
Agreed… its not just nicer to work on clean ‘stuff’ it helps stop damage. Its good practice.
Knocking like a door to door bible salesman...best one I've heard in a long time.
Just did mine, 09 E63. Your video was excellent reference. Bolts, adjuster plates from 63 motorsports and new lifters. Thanks for posting.
I have a 2013 year think lifters are bad, as Chris says while you’re at it , what other parts can i replace as i do the lifters?
@@realmike8238 If lifters are bad, check cams
@@realmike8238 2013 has updated head bolts, no need to do those on your car ❤
@@KafeiMask thank you lots for that!
@@realmike8238 no worries! Very nice car you got congrats! Recently sold my 2014 c63, looking at w211 E63’s 🙂
Excellent video. I've been procrastinating doing the headbolts and adjusters on an 09 M156. You make it look easy.
I’ve been watching you since that V1 CTS V and man I love your work, then as a person, you’re a cool dude, very humble, and calm personality. Looking forward to your progress and achievements
Thanks brotha
Great and clean job. Just one thing I would add. After cam sprocket work always set them up with your chosen diag equipment. With the official Mercedes diagnosis kit there is a option to do this in the adaptation menu. 😊
As we say in the military attention to detail! And that my friend you absolutely have! There is no greater satisfaction then doing the work yourself. Knowing it’s your car and you want it done right. A job well done. 👍
I did a ton of research to see how many head bolts fail on the early engines by asking dealer techs and independents . The results were common in that failure was rare, like 1 in 100! Also, If a bolt snaps when you try to remove it , it becomes a major major job . For these two reasons I have chosen not to change my head bolts and keep a close eye on coolant level.
what does keeping a close eye on coolant level meaning?
@@eatmoreeats9566 it means checking it a lot . When the head bolts begin to fail , the water level either drops or becomes contaminated with oil
@@highdefp-rm7zg oh wow great information
@@highdefp-rm7zgdoes oil analysis help at all ? like with BMW rod bearings ? or does it just contaminate from the oil to the coolant?
exactly! if the old bolts are fine till now, they'll probably stay fine. there's no guarantee that the new bolts will stay fine. probably has to do with some bolts having bad coating
Finally, a new episode of your beautiful W212 🤩
Thanks in advance and kind regards from Germany 🇩🇪,
Philipp 👋
Also took care of this job on my channel for my ML63 AMG along with head bolts and cam buckets using upgraded OEM parts and the 63 Motorsports adjuster plates and hardware. Nice work and great video, cheers to many more smiles in the M156! Subscribed!
I watched your video before tackling the job. Great video!
Came for the TT c6 Z06 stayed for the quality of these videos keep going bro you’ll be in the big leagues soon 💯
Thanks man!
I really enjoyed every minute of this video. Very educational and interesting. I am so glad I have found this channel. You pay attention to every detail. This makes you so unique, compared to many other mechanics and shops. Great job Chris.
Just bought 2008 CL 63 same 156 engine, was little worried about it’s condition, this is where I found this video, great job man! Great filming and editing! Smooth af! Thank you for your time.
Hi, I started watching your channel when you started your 69 Camaro since I am doing a 68, but I wanted to let you know I find your work on everything is top notch and usually way beyond my capabilities, but there is something we can all take from them like how neat and organized and thorough you are. Your music taste could use some work 😄, but other than that very impressed.
@@Official_ChrisSullivan Hi , thanks for the gift offer, totally not necessary, and I don’t even know if this is where I send the response but curious and based on you videos it could be something cool.
Nothing better than a job well done!! It sounds better now even at idle, great job Chris!
A job that doesn't have to be done is the best.Built in obsoletion the Germans are the best.
I love to say you do a great job. I,like a lot of us have been reading, watching everything about car's/trucks my whole life so I can see real quick if a person has a good way to explain. You do a great job and I love what your working on.
these videos are incredibly great. you’re insanely talented man!
Dude you are awesome. You have so much attention to detail for everything. I hope to one day own a garage like yours with a lift and all those awesome cars you have
So many videos of this procedure on the tube, and this is by far one of the best! Appreciate the content...
I'll be tackling cam adjusters on my '11 soon. Always appreciate how thorough you are. How about some affiliate links to the items used in each job like timing tools, plastic wrap, fluids etc? Interested in supporting future content.
Good idea! I'll add those links. Reach out if you have any questions.
@@ChrisSullivan69do you have the links for the parts I really need those. 👍🏼
How is she holding
Amazing how quiet it is after that work! Next items you may want to do are new injectors, PCV valve, and pulleys. They factory plastic pulleys seize around 60-80k. I replaced my PCV at 70k and it wasn't broken, but felt soft compared to the new one.
You can actually here an idler pulley making a bit of noise in the video. Already have a new one on the way! other than that its running smoooooth
@ChrisSullivan69 injectors have been know to kill m156 engines. I put new injectors on as my first mod 2 days into ownership. Dont wait.
Great call on injectors. My 09 has 68k and it was the first thing I did 2 days into ownership
@@OGYELLOW I think I replaced mine around 70k as well with the BOSCH ones. I was surprised how dirty the old ones were and I've used nothing but 93 octane in mine.
@FirearmTutorials me too! Mine were filthy although no idea how it was treated before me. I pulled 100k injectors from a vq35hr and they were spotless. Granted a couple hundred less hp
Really enjoy watching your channel. There’s a little bit of everything, nice work!
Thanks!
I did this work (just the cam adjuster rebuild though) on my C63 few months ago and a relearn was necessary. After about a month of driving I started getting misfires and cam out of position codes. After clearing the codes using a normal scanner they came back a few clicks later. Since the relearn I've had no codes but I also have not driven it much (stored for winter).
I hope you bought new cam shaft bolts since the original ones are one time use only. Great video! Keep us posted.
I have 09 sl63 when I bought 5.5 years ago. I read all about the head bolts and after a year I had the first low coolant light. Thank goodness I bought the aftermarket warranty and they covered the headbolts, suspension pump and front suspension before the end of the 3 years. I change the oil frequently but thin that I will have to do the cam tensioners soon - thanks for giving me an insight on what it entails
was on the market for a 09’ SL63, amazing video! very detailed about the head bolt issue. keep it up!
Great video! I just picked up a 2010 C63 with low miles as a fun summer car.. I can't find any records of the work being done.. so going to do the head bolts and cam mods so I can have some peace of mind.. You vid will be on full screen and I take it all apart! Cheers!
Chris you and Tony Angelo are killing it!! My 2 favorite channels by far!!
Originally I had a lot of praise , however at 46:50 said it all! Speechless!!
Great video. Getting ready to pick up a 507, just under 80K miles. Wanting to learn more about maintenance on M156. Hopefully I’m not getting over my head with the car. Great video! Thanks for sharing.
In my opinion as a MB tech the M156 is definitely one of the more approachable engines for enthusiasts to work on. Good luck on the sale for that 507, I still remember the first time I drove a 507 C63. It was badass and roudy!
How’s the m156 treating u
As a mechanical engineer... softer plate or softer pin.. I'm going with a softer pin if it means the assembly can still function in the event that the plate wears out. Seems to function fine, minus the annoying rattle at start-up. Amazing what is charged for aftermarket plates but this is a 100K+ car new, so.. maybe not so much; everything comes at a premium $ with these cars.
Nice video detailing the replacement process, thanks!
yeah. I wonder what's the problem with a little rattling. the vanes inside seem a lot stronger and I doubt it would break easily. most manufacturers don't use pins; I think they use a spring to dampen the lash
I wish I knew 5% of what this man knows about cars. Im amazed more and more with every video.
A the old while your in there.. gets me everytime. Always happens to me go to change one thing end up doing 5 or 6. Makes sense in most cases.
Bigly underrated channel. You’re the v8 king!
I like how you start with cleaning… so frustrating to watch people working on dirty cars and engine bays… its not just bad practice, the damage from dirt is real both to bodywork and engine internals is real. Also its just nicer wot work on clean stuff.
You are much braver than I was! I pulled the heads and installed ARP headstuds instead of the updated head bolts. I added the SLS buckets and billet idler pulley set from Weistec since I was there.
Great job on your part, your engine looks immaculate!
Recently I put in new fuel injectors and noticed my intake manifold was disintegrating…so I had to get a new one. Keep an eye on that!
Nice! Sounds like a big project. W212? Did you pull the motor?
@ I also have a 2010, but a W221. Bought it in 2015 and loved every minute of it!
No, I didnt pull the motor and I said a lot of prayers after it was all put back. I ran all the software checks and it started on the first try.
I also run stock except for a cold air induction kit with AfE that I got from a local guy I met at an AMG meetup here in Houston. Ultimate Performance.
So far, I’ve replaced the crankcase breather twice from those two projects I mentioned in the first post, both engine mounts, and front camshaft cover seals for an oil leak.
Replacing the manifold was also a good idea, since all those electrical connectors were spent and barely hanging on. Now the manifold looks just like yours! Haha
Forgot to mention, 5 of the head bolts I removed were corroded, so it definitely was warranted for me.
I’m proud of your attention to this legend. The same approach I use. Respect! Nice drive!
TH-cam algorithm hooked me up!
New here. Loving the car!
One of the few channels that have my attention the whole video. The content is thorough, your knowledge seems endless, and the cars are clean. Have you ever discussed what you do for work? Interested to know.
Man I said the same thing. Some video you just want to fast forward but not his. He's a great teacher.
I can't even imagine what that would have cost at the dealership! Great job, great documentation of your work.
What do you think this would’ve cost to get done
Stretch plastic to protect the front fender is brilliant. Good tip...
Thanks for sharing this comprehensive guide. I'm considering buying a 2014 model so hopefully not too many of those issues exist on it but I now have all the necessary info to do the work if required.
47:00 Great sense of satisfaction having that purr like a kitten.
Great video Chris! I did this exact same job a year ago on my C63, even did the same marks on the phasers. I was wondering why you didn't change the lifters in the first part of the video, but then saw you changed your mind at the end. Thanks for some great content.
Great work! I just did the same job on my 07 CLS63, M156 is a pretty easy engine to work on.
i’m considering buying a 60k mile s63 2010 and the only worry i have on it is this. I’ve done my timing belt on my current lexus but this seems pretty straightforward. Any input on the car and the engine project.
@@maxmiller3719 everything went smooth, if you have any other experience with working on a cars engine you should be okay. Just be patient and do lots of research.
Well done big fella .....great camera work and your explanations of what your doing is fantastic.
Did all of that to my 2009 E63 two years ago when it had 50k miles on it. Initial complaint was high idle speed with no codes. Removed intake to find corroded throttle support plate which I replaced with the aftermarket aluminum one. While in there, bead blasted bottom cover and painted with aircraft primer. Next, noticed oil leakage (tiny bit) from the valve covers, so removed those plus the front adjuster covers to replace those seals. Again while in there, did the head bolts which looked exactly like yours, and wondered why I bothered. Noticed some distress to a few of the lifters, so replaced all those too. Cams looked fine. Adjusters had a bit of locking pin hole wear on the intakes; exhausts looked perfect, so reassembled those and reused. Also replaced PCV valve.
One note of caution: washing the engine lets water get under the intake manifold and causes corrosion of the uncoated magnesium. There are foam pads between the manifold and valley which trap the water.
Amazing. Thanks for documenting this. Gonna help alot of people do this job.
I use ceratec with every oil change on my 63, with the M157 engine, the valve train noise is significantly reduced. Beautiful job BTW.
Man you did it like knife in butter amusing job i love the way you marked three marks to make sure you are doing well great job man
😃
Real informative Channel on all your projects you giving out Vital Information
Awesome content. Super clean shop/garage and mad props for being so thorough. I’m a e90 m3 owner and was researching some stuff to potentially switch to the m156 e63. Glad I found your channel and feel leaps better of switching now.
Man it's relaxing when watching this engine work videos. Man you are a great mechanic with your attention to detail. Great job!👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿
330k miles on my m156.....did the head bolts one at a time 175k miles ago....did the pin flip at the same time as the headbolts....had the noise come back about 15k miles ago and ordered the plates from 63motorsports and they were AWESOME!!!!!! Once you understand how it works the m156 is SUCH an awesome engine and is also great to work on
Wow 330k very impressive. Original cams? Awesome to hear they can run that long!
@@ChrisSullivan69
also, if you were to have the old head bolts magnafluxed i can almost GUARANTEE that you would find that at least 4 of them were cracked just below the head....if you wire brush them you can probably see the cracks with the naked eye....
@@ChrisSullivan69
the cam sensor relearn is NOT necessarily required, i did not do it when i first did my headbolts and everything seemed fine after the fact. However, i will say that in the meantime i have bought a new diag system that allows me to do all of the relearns and when i did the adjuster plates i did the relearn and it DID feel a lot stronger, but may have just been the adjusters able to hold accurate timing again.
and its easier with the scanner but resetting the trans adaptives in these cars REALLY wakes them back up.....shut it off, KEEP THE DOORS CLOSED, press start 2 times, press the accelerator pedal all the way to the floor and hold it, press start so that ignition turns off....keep holding the gas to the floor for 10sec after turning off ignition.....let go of gas pedal....now sit there for 3min, do not open the door or anything, just sit there....after 3 minutes have passed open and shut the drivers door and youre done(Mercs see the driver door opening and closing as part of the ignition/drive cycle, as in when the ecu sees the driver door open and close after the ignition turns off only THEN does it see that drive cycle as being complete)
@jp taylor good to know. Car has been driving perfect without it but I've got an appointment at the dealer to have it done just to be sure. It does call for it in WIS. I'll keep the trans relearn in mind!
Killer - I've heard of the MKs doing close to 500K but not a M156, yet. Our 07 E63 just turned 110K so that is good to hear. We had to do a disassembly at 100k for carbon-plugged air injection ports and did the head bolts, etc while in there - running good now, I absolutely love this motor - plan to keep it as long as it makes sense.
Wish I could do half of what you do, Chris. Good video, I’m learning.
Thanks for that, awesome job - you're a brave man Chris !
Fantastic video my guy! You're my new go to channel.
Dawg my motivation is through the roof after seeing this video.
You do some awesome work, thanks for showing all of the details !
Nice visuals on the failure point of cam adjuster backing plate.
Good to know about the cam adjuster plates. I have a 2014 C63 almost 100k on it now. So I'll have to start lookin into that place in Canada. Thanks for the info 🤘🤘
Getting ready to do this on my 09 E63. 242k on her and figured I'd do this as well as the intake belly plate issue and crankcase breather valve. As far as I know original headbolts. Bought 1/2016 with 82k. Great video...subscribed!
Is that 242k miles or kilometers? I’m at 120 k miles with my m156. Of note : The dealers and merc specialists told me that head bolt issues are rare .. like 1 in 100 , so I’ve chosen not to change my head bolts because if one snaps off it becomes a major major job ...
@@highdefp-rm7zg 242,000 miles. I've never had any coolant issues so yeah I'm leaving well enough alone with those. I may be buying new camshaft followers too depending on what shape they are in.
@@highdefp-rm7zg Thats in miles. Replacing the radiator currently. Just replaced the water pump, upper/lower radiator hoses and serpentine system last summer.
Great work and video.
A bit of constructive criticism… The only thing I would have done differently of this was mine is replaced the oil prior to start up once you knew you were changing the lifters, then do another change once the engine has heat cycled a couple of times as the flush. Reason is the cam lobes and lifters have very high contact pressures, the most extreme in the engine, the new oil should contain high levels of ZDDP, would help save the cam and lifter surface of wear at this critical bed in time, also fresh oil helps the lifters pump up quicker which again can be a cause of damage due to the large clearances hammering the cams and lifters.
Really enjoying your channel. You are so real.
This is beautiful work. That’s crazy keep it up
You love this car... Nice work man! Sound is amazing 😍
Doing my valve cover gaskets and camshaft adjuster seals your video helped a lot thank you
Great Video Chris, i'm waiting to receive your plates and i will do the complete job
Great vid!! Next time throw the lifters into a tray of oil and make sure they are all submerged for about an hour. Self bleed any air in them that would cause it to clatter.
Watched thew above video. When cleaning or replacing your camshaft phasers and/ or replacing your vvt solenoids, the vehicle has to relearn the system, or the result is misfires. Using a scanner/programmer do a factory reset to factory setting. Put the vehicle in relearn for camshaft adaptation. It will walk you through the procedure. You will have to raise the vehicle to 3000k rpm for 3 minutes and it will notify you when the test is completed. That is the norms on almost every E-class Mercedes that uses cam-phases (aka VVT adjusters) and VVT actuators (aka magnets) solenoids. Hoping this is helpful in resolving issue. Recommend using STAR scan tool or Autel Maxxis.
Awesome video. You are the best teacher in mechanics hands down. You make me want to buy a lemon just so I can take it apart then fix it.🔥
Great video! Thanks for showing people how to do the phaser plates!
Appreciate it guys!
Such a quality vid, I’ll be watching it at least 10 times!
Man making me miss my 12 cls550, i had k&n filters, airbox spacer kit, vrp charge pipes, exhaust and tune. Man that car was so sexy and fast no other motor has that mercedes exhaust note. You have yours looking sexy thats a nice car
Just bought a 2009 CL63 AMG a couple months ago with 60k miles. I was pleasantly surprised to find a Rentech carbon fiber airbox under the hood. Called Rentech in Florida with my VIN # and they told me they had worked on the car back in 2013. Upgraded airbox, throttle body, headers and a ECU tune. $20k in upgrades on top of the $155k purchase price. Got a fun car now with 571hp and 533ft/lbs of torque.
I bought it for $30k from a Buick dealership that didn't know what they had. Black on black, no accidents, extremely clean, like new.
Love the CL63!
Bro if you live near me or I live near you, you would be my main mechanic you're real good! 👍👍👍👍👍👍👍👍👍
You never disappoint!!! great video!!! 🔥🔥🔥
You have my upmost respect 🫡 the detail and care of your workmanship is superb. Harbor freight has definitely come a long way with their tool selection . I know cause I have a few that I use professionally , their icon tools are top notch . Quin makes a tourqe wrech similar to your half inch drive . They make a 3/8 drive as well . I would look into it and it’s great quality . I was thinking about an e63 but was wondering about the timing , common engine issues and came across this video . Glad I watched …! Thanks again !
Thanks forwatching! !
I learn a lot watching your channel. Thanks for the videos!
Chris just came across your channel. Great stuff man. Love a the content. I love that you your not afraid of any project, German, ford, and GM of course. I am a BMW, GM guy and have a built E90 I use for tracks and general rippin around Cape Cod my daily is a 2018 340i Xdrive and a 2006 GMC Sierra 4.8 L both of those are stock except the 340Xi has a Burger JB4 tuner which took the stock B58 322 HP to 400 HP on pumped gas. Fun car. Anyway man love your stuff. Keep the video's comin, love your Channel. Happy Holidays. Chris D.
Great video. I own a 2011 W212 and wish I had that engine!
so knowledgeable chris, thank you for the videos brotha
My brother did his pre-emptively on a CL63 after a long trip consumed a small amount of coolant. One bolt came out with NO resistance cos the head was coming away from the bolt. I'd already traded my C63 on a B7 RS4 to a dealer (telling him about the bolt problem) cos in NZ every M156 auction pre 2012 had "done the head bolts yet mate?" questions by people on a public service campaign or something. I'd disclose it anyway but nobody would buy it. *The Mercedes dealer said we have to wait til they fail (they fixed one that hydrauliced and bent a rod) cos they made our cars WORTHLESS.*
Great cars are kept running that way by a meticulous mechanic. I'm glad I found another out there like myself, just wish I had the bankroll to support the habit.
Your so down-to-earth and cool to watch work on your own stuff subbed!! 👏🏾
Outstanding work. I really like your videos. Very hands on. Lots of useful info. Please paint that intake on the C7. Red
You have an AMG. Which means you’re cool. Which means i’m subscribing.
Excellent : how the lock plates work for Mercedes AMG C63 . . . Thanks . Larry Hernandez
Absolutely best video in some time. 🎉🎉🎉
That is such an awesome looking ride!
What a beast of a car. Good job man!
XF Motorsports fixed that part with simple welding. You should watch how they did it for future reference 😉
I don't have a $100k CNC machine like they do lol
Great video. I had a C63 at one point in my life. I miss it very much. I am wondering why you didnt put in the black series tappets?
Man it’s crazy you know ur way around any car it seems like
Hi Chris. Very good your video, now I identify the problem of my c63. Help, where did you buy that new part? Mine are all worn out.
Great Job!!! Enjoyed the video even though I don't have a M156.
done
Man that thing sounded good when put the petal down!
Hey Chris, at 23:22 when you are re-assembling the cam adjuster, did you re-use the factory bolts? And what ft-lb did you torque them to? I have found info that states to torque to 11ft-lb, then go back to 16ft-lb all around. Is that accurate?
Taking off and putting the Valve cover on is so annoying, I gave up and had it towed to the dealer LMAO
Great video, nice job on a beautiful motor.
Nice video. Nice E63. Nice job. Just saying that that you have to do the head bolts, lifters, and cam adjusters sounds very complicated but your process simplified the project.
Is stretched timing chain a common cause on these AMGs (E63) or only the adjusters fail on them?
Stretched chain is not common