Gladiator Build Part 6 McClean Metal Works Hammock Stand
ฝัง
- เผยแพร่เมื่อ 27 พ.ค. 2021
- www.selfrelianceoutfitters.com
Please Visit my Amazon Influencer page and my web site to see most of the gear I recommend and use
www.amazon.com/shop/influence...
Check us out on Instagram at- / pathfindersurvival
We have a large Discussion Group for Learning on FB at- / 178558438998777
Check us out on FB at-
/ woodlandbushcraft
/ pathfinderschoolllc
/ vikingbushcraft
For a full media kit or further questions contact me direct at
pathfindersurvival@gmail.com
There is no reason not to have this, it gives comfort, and a little joy wherever you go, and not to mention convenience if someone ate beans and needs to sleep alone.
"Looks like we have some instructions here" sets aside, won't be needing that. 🤣🤣🤣
Been using that exact set-up for a couple of years now. LOVE it ! To that, I've added some of their extras, like the zippered tubular bags for storing those poles in ( bought two bags ). I also bought the rain-fly kit (reason for the second bag). Those caps at the end where the carabiners hook to, those pop out and stubby poles insert in them, each has a tit for the rain-fly grommets. I also have the suction cup for the rig, to attach one corner of the rain-fly to, and use a short pole to raise the corner headed to the ground.
Since I have a Tahoe with the ambulance style doors, and my Dakota P/U which does not have a 2" receiver hitch on it... I opted for their accessory, which is of the same caliber of steel, triangular in shape. It stands on the ground, against the tire, and a 10,000 lbs capacity ratchet strap goes around the tire and secures the frame to the tire. It has the 2" receiver on it as well, and the hammock stand slides into that. I like using it on the front tire and turn the tire so the hammock angles away from the side of the rig, allowing me to open the door to access.
I rig a 10' x 10' tarp from the roof rack and use three of those Green Elephant poles and guy lines, and 12" spike tent stakes. Add a "tail-gater table" sold by Firebox Stove, and I have a covered table/sitting area at the rear wheel of my rig.
Since my rig is too old for the slider kit... I use the Ridgid tool cases to store my gear in. They lock together/stack, and can be supplemental seating for camp visitors in need of a place to park. I just got home from camping for the long weekend. LOVE me some hammock snooze time. Also, for those of us a little older, and/or mid-line ballast challenges... sitting up in the hammock, and reaching behind, you can use each of those poles as a hand-hold while getting up.
Dave, it looks like you're bringing 'smoothin it' to a whole new level in this series. It's fun watching you evolve over the years.
So happy to see this! When I first became a van dweller, I had little more than a hammock in my van but that was okay because it kept me out of the hospital and restored my health after my 2nd bout with severe mold poisoning. Now my van build has progressed and I have a more conventional bed but I MISS my hammock! I really want one of these stands 🥰
Everyone’s talking about the hammock, but can we all appreciate Dave’s “Got Mora” license plate? Subtle, classy, perfect.
When I built the rack for my gladiator, I had to have a hammock hanger off it. Off the passenger side and rear two bars swing out with 10ft between to hang my hammock. Still have the back for my kitchen.
This is a great series to follow. You demonstrate plenty of ideas and the reasoning behind them.
Cool stuff. I wouldn't mind having one of these.
Very cool, I like how compact it is. I made one years ago, similar although not as compact. I made it with a receiver extention that allows me to keep the tail gate open. I also added a adjustable stand to eliminate the bouncing which becomes more of an issue with the receiver extention. The greatest attribute of the hitch mount is you have the ability to use a hammock in places you normally couldn't, like facing a beautiful veiw. The only down side is your shelter system is mounted to the rig, which for long camping trips can be an issue. I still have and used mine today.
Dave a little trick i've found for your hammock is that you put a string about the lenght of your hammock to the inside zipper so when you go inside to stay you pull the string and you can push it out with your toes it worth every penny
Just ordered mine! Thanks for the review.
Not only is this my favorite truck ever made. But Dave has the most decked out one I’ve ever seen by a absolute mile! Great video and great series
Awesome setup. Nice that the tailgate can still open.
Great review, I had this on my list to mount off the front hitch mount.
Lol..the exact hammock stand I mentioned in your first vid!
I can't wait to get mine!
Great vid Dave thank you!
I love these Overland videos!
That is a pretty slick device!!
That’s a very cool idea. I love your truck, it’s a beast!👍🏼
Really cool Dave
That is really cool , thankyou,safe travels.
I want one of those. That would be better then a camper any day 👍🏻
Excellent piece of equipment for anyone with a hitch. 👍😎
We love ours! Had one of the first ones he built.
dude, its been a long time but damn i love the vehicle aspect you are going to! love it, overlanding is huge Dave!
I had the McClean Metal Works Hammock stand on a Renault (like a sprinter) L1 H2 van (you can view the van tour and the stand on my channel somewhere I think). I never used it because it seemed like there was never an opportunity where it made sense to use it (either too cold, too close to other cars, not a good view, too close the the ground, etc). I think a kammock portable hammock stand makes a lot more sense, it weighs the same or less and you can put it anywhere. McClean had excellent customer service and did a great job on the stand, I just don't think the idea itself is as practical as a stand alone stand.
You deserve way more followers
Dave I had a really good question I was going to ask but then I had a check in my spirit and thought ,"Answer the question before you ask.". So now I've got some drawing to do.
Thats actually really cool
I need one of those!
Nice show and tell there Mr Canterbury that Jeep 🛻 there is starting to look like it’s becoming a home away from home 🏠 little by little nice 😊 👍 👌✌️🇺🇸
Good job 👍
Cool...been watching for years now love your videos
That thing is awesome
And you have the added advantage of the vehicle suspension!
I bet it wouldn't be too bad to modify that bumper to accommodate two poles for a similar result, for that matter a little welding on any bumper might do the trick. How about a tarp over it, that close to the bed maybe access to the inside of the cap as well. Cool idea.
Looking good man. I’ve been eyeing these things. Glad you got your hands on it and testing it out!!
That's pretty sweet. You almost beat the rain.
You rock man!
My mom just got your book for me, I am loving it so far, great job!
nice tyres man
Much appreciate the demo David. Being 6’4” and a hefty guy like you, I was happy to see how it handled you and your 11’ hammock.
Seems a great product. Was eyeing it for a while. Once the borders re-open, will certainly order one and have it shipped to Ogdensburg, NY.
You see the guy that made a trailer hitch coffin camper ? Or the collapse hotel that needs minor adjustments for me to call it perfect.
That`s a good setup I like it .
If your grill guard has a receiver in it you could still have easy access to the back end.
You can order a front hitch for most vehicles, have one on a 96 ford, still want one for the expedition
Nice!
This is next level tailgating right here
Shugemery likes his too!
Cool!
Damn nice hammock stand for your truck Dave,I've enjoyed watching u fix up that truck it has almost everything,nice video
This is America!
Might want to look into a Draw Tite J pin to take out the receiver rattle.
Cool.
In the good old days, I can see myself lying in the hammock as my friend drove through town. Oh, what the heck- You only live once!
I actually own this stand myself, I like the ability to camp anywhere, BUT this is not perfect, I am in the 240# range myself using a Tacoma, and the hammock damn near touches the ground, your underquilt definitely touches the ground. I’ve had the same results with my 4Runner, my only solution to work around this is to put my handyman jack under the hitch and raise it up to where you want. This totally fixes that issue, the other issue I have is the perfect tension on your guy line, as you sit on it, the 2 aluminum poles obviously come towards each other so that your line tension is a little sloppy. You don’t get that with trees, I do like it but I haven’t found it to be perfect, does anyone else have these issues?
I like how they give you the clips to keep the poles together when not in use since this is not a folding setup. Bonus since there is no moving parts less chance of this system failing.
I think I like this stand system better than the one I was looking at before. Much simpler and a lot less flex/give in the bars on this one. Lot more clearance away from the Jeep as well. This is with the hammock set you have on SRO isn't it? Just wanted to double check.
Cool 😎
nice
I wonder if you've seen the jacks for a truck cap that works like a pop up camper? I thought that they were pretty cool addition to an overniter in a vehicle. Nice video on your Gladiator Build it looks like you have whatever you need there. It's funny how a guys truck will turn into a 40,000 dollar man purse/closet/toolbox/bedroom etc.
👍👍Nice!
Leave it in the receiver and put skateboard tape on it. Perfect step to check the top of the shell.
String across the two fartherest points and a tarp and you have an a frame roof for rain / dew protection.
Even if you just let it hang
But if you stake it you could be away from the tarp. Either way your dry. Cause dew never falls at
0 4:40😎
Cool product!😎
Dave, could you give me some dimensions on the Hammock stand?
1) Bottom Brace: Length from (Center of Left Pipe Hole to Center of Right Pipe Hole).
2) Top of Pipes where Hammock connects: Length from (Inside of Left Pipe to Inside of Right Pipe).
The way my Hammock is set up I'm thinking it is to long, so I might have to do some modifications.
Sweet! Simple comfort! 👍🏼🇱🇷
Is this hammock mount hitch still available??
GOTMORA 👌
The truth...you edited out the nap you took cuz it was so comfy?😁😁😁
Awesome video
Is it the standard, or XL model? I have the same hammock.
Do they make standard (Non- Trailer Hitch style) stands as well that works well for the pathfinder jungle hammock with bug net? 4:33
What's up David's Brian McCarty you know we appreciate what you do what you've done anything people like us continue to do let that flag fly brother
Nice setup. What brand of portable power station do you have in the back there? I’ve been looking recently, lots of options out there. Thanks
Jackery 1000 there is a review of it in this playlist
Nice Jeep OllllllllO
Which hammock are you using? Just tried a warbonnet blackbird XLC and it was too long :(
I have a Jeep JK with a big old 37 inch tire on the back. I wonder how much that tire would get in the way
That company makes tire mounts too. The hammock hanging assembly mounts on to one of your tires instead of your reciever.
I like it👍🏻
5:55 put grip tape on top, make a handy step
| NICE | Really NICE.
It would be better if it folded up and you could leave it in your receiver. That way it wouldn't take up bed space.
does it zip while in hammock???????
What brand of hammock is this?
Very cool hammock!!
That's cool. You seem to be having so much fun. God bless.
What's the weight limit on that guy? I'm 6'4 and 240lbs, I am afraid I would bend that thing out of shape.
I weigh almost that
You're a little chubby, but you'll be fine. That stand is rated to 300 lbs. You should also get a ENO Double Nest hammock for your weight too.
👍🏻
This kit looks like it puts the hammock out further than Shawn's kit did. Is that true?? I have seen these kits before and most keep the hammock to close to the back of the vehicle, IMHO
Yes, this thing is the perfect offset and very stable
Lmao Smoothing it !!!!
Thanks for sharing.. What length hammock were you using?
11'
David Canterbury, made in the USA!
Where in the heck is my tarp?
Get an extension piece to extend your hitch input. That way you can get to the tailgate when it's down
Sure it's priced on the high side, but.... unfortunately that's the current state of affairs here in America. It's certainly not Dave's fault, he's just trying to show us high quality products made in U.S.A. If we don't start supporting these American businesses now(like we should have been doing all along)then nothing will ever change. Very sad, but very true.
I don't think the cost has anything to do with it's country of orgin. Even the other brands that are made overseas are priced in the same ballpark, some are more. It has more to do with economies of scale and the niche market a product like this and the others exist in.
This setup build great I have one and I can mount it on my motorcycle with sidecar. I try not to buy made PRC goods. I do not support their military. Because half of the money of every business makes pays into the government. And I do mean half of their profits.
Their is additional cost to buy from China such as lost jobs, lost govt revenue, and having to rely on another country for your needs. Then if you consider the environmental impact of China’s manufacturing and supporting an oppressive govt that your govt has to subsidize then the scales tip drastically. Seems more expensive when you add it all up. Average Joe down the street will thank you for it.
Hey. Do you still do the entry level pathfinder classes? I'm in Portsmouth and a group of my friends are very interested
Yep our training schedule is at selfrelianceoutfitters,com
Don't leave theain piece in the receiver hitch, some A-holes will steal it, don't ask me how I know, thx for the vid.
Locking hitch pin fixes that
I was about to cuss this odd piece of gear till I saw old glory..if it was from chyna, you already be on your butt
Since it was raining, why didn't you demonstrate how a tarp might be utilized with this gadget? It doesn't seem too straightforward to me and could use some 'splainin', for my part. I like watching the buildout on your ride.
Already have a video in this series on that
@@DavidCanterbury Sorry, I thought you said you were getting it out of the box for the first time. I must have missed a video. Was it after this?
@@DavidCanterbury Dave, I found the tarp video you are referring to. Part 4 of this series? I had watched it before and forgot. Now I'd like to know a good setup if you don't have a steel bed cap and want to sleep in the hammock in the rain instead of the cab, if you can come up with one.
Daves shoulders looks like he’s been bench pressing school busses. 😁
First...which means that: