Also need harmonics stabilizer kit from terminador airgunz and outdoors to lock down the actual barrel inside the shroud so it doesn't shift or move anymore. Then a barrel shroud lock down for them. You can put wire heat shrink on the pellet probe instead of rubber and a moderator helps too and bottle kits. eBay has it for 4$ and terminador airgunz and outdoors is on eBay too. Look it up. The rifles will shoot 100+ yards.
Cut largest size or second largest size to 3mm or a little less. Any more and it will extrude out the back. Use a razor blade and a piece of wood with 3mm marked . Just add some silicone oil to the probe to slip it on. Robair has another version I'm gonna try with dual wall heat shrink tube with adhesive. I would clean the probe with alcohol for that one. www.amazon.com/dp/B071H5XC7C/ref=cm_sw_r_cp_awdb_imm_QSPVMGJ8YQNM2BXKYYQ9
Someone is making a killing off of selling little chopped up pieces of 3/16 small engine fuel line for $10 each, LOL! I ordered one of these kits and compared to said fuel line that can be obtained from Advanced Auto by the foot for a few dollars and it's identical in every way. Save yourself some money, make 5 or so "O-ring delete kits" and still have line left over to repair your gasoline weed eater.
You guys who wish to DIY with surgical tubing or fuel line can expect good results for a while, but don't expect yours to hold up as long as urethane does. Yes, the product works with Origin, Gauntlet, and Avenger because the probe is the same. Use a dab of silicone grease or chamber oil to ease installation and don't worry if a little stays on the probe. Expect it to seat fully after 5-10 shots. .25 cal has been out for a while now and I expect that .177 will follow if it hasn't already. Avenger .25 cal user.
I believe it is medical N2o hose but doesn't matter, it works I have 1000 AA Diabolo Field 16gr pellets and 2000 CPHP 14.5gr pellets through my origin and definitely makes tighter groups and picked up a few more shots in a fill so he takes the time to make them and ship them to you what can anyone complain about seriously, do it your self if you don't like the price or the fact that it could be done yourself but instead someone else has beat you too it lmfao ha I ordered mine from stko a month ago and all I have to say is thanks for a good product that is proven,tested rigorously and I mean rigorously so.....
Also need harmonics stabilizer kit from terminador airgunz and outdoors to lock down the actual barrel inside the shroud so it doesn't shift or move anymore. Then a barrel shroud lock down for them. You can put wire heat shrink on the pellet probe instead of rubber and a moderator helps too and bottle kits. eBay has it for 4$ and terminador airgunz and outdoors is on eBay too. Look it up. The rifles will shoot 100+ yards.
Sharing is caring. Thank you
Cut largest size or second largest size to 3mm or a little less. Any more and it will extrude out the back. Use a razor blade and a piece of wood with 3mm marked . Just add some silicone oil to the probe to slip it on. Robair has another version I'm gonna try with dual wall heat shrink tube with adhesive. I would clean the probe with alcohol for that one. www.amazon.com/dp/B071H5XC7C/ref=cm_sw_r_cp_awdb_imm_QSPVMGJ8YQNM2BXKYYQ9
th-cam.com/video/hah9fGgY6Uo/w-d-xo.html
Someone is making a killing off of selling little chopped up pieces of 3/16 small engine fuel line for $10 each, LOL! I ordered one of these kits and compared to said fuel line that can be obtained from Advanced Auto by the foot for a few dollars and it's identical in every way. Save yourself some money, make 5 or so "O-ring delete kits" and still have line left over to repair your gasoline weed eater.
Thanks I appreciate you watching the video
I use wire heat shrink on eBay. Unfortunately it outlasted the rifles pesting. No more Umarex and AVA
You guys who wish to DIY with surgical tubing or fuel line can expect good results for a while, but don't expect yours to hold up as long as urethane does. Yes, the product works with Origin, Gauntlet, and Avenger because the probe is the same. Use a dab of silicone grease or chamber oil to ease installation and don't worry if a little stays on the probe. Expect it to seat fully after 5-10 shots. .25 cal has been out for a while now and I expect that .177 will follow if it hasn't already. Avenger .25 cal user.
Thanks, I have the Carm magazine from my Avenger. Does this eliminate the need for the bolt probe?
Donde puedo conseguir una junta así
How do you fix a slow leak from fill prob
How to get in touch whit Jimmy ?
Beeman 1085 magazine will work and doesn't have the problem the fake marauder and marauder mags have.
U need to use the jsb MKII!
Its fuel line.
What size? Where would one buy the tube?
th-cam.com/video/hah9fGgY6Uo/w-d-xo.html
STKO sells the tiny fuel line piece for ten dollars.
Alguien que me diga si realmente funciona eso
How much is the o-ring kit for umarex gauntlet. 25 cal.?
they're $10 each here's my PayPal link, please include address also www.paypal.com/paypalme/STKO2011
What size of fuel line is it?
What size fuel line or med line?
@@STKO2011 do you have the probe o’ring for gauntlet.177?
@@moeenzo2 yes
I believe it is medical N2o hose but doesn't matter, it works I have 1000 AA Diabolo Field 16gr pellets and 2000 CPHP 14.5gr pellets through my origin and definitely makes tighter groups and picked up a few more shots in a fill so he takes the time to make them and ship them to you what can anyone complain about seriously, do it your self if you don't like the price or the fact that it could be done yourself but instead someone else has beat you too it lmfao ha I ordered mine from stko a month ago and all I have to say is thanks for a good product that is proven,tested rigorously and I mean rigorously so.....
😂
9 min. of talk.