Thanks so much man! All of this really tightened up my rifle, for free! I couldn't believe how loose the rail mount and barrel screws were! The weedeater string trick blew my mind how effective it was.
Awesome. I also have new aftermarket barrel band I installed that helped even more, then when I sold my umarex I kept it, if you interested I can sell that to you, it helps to support barrel even more,
FYI from the factory, my hammer screw (purchased in early October, 2024) was 1.75 turns from fully tightened. @SuperPete In this video, at 1:50 you mention Umerex indicates this should be 1.5 turns out, but then at 3:28 you mention 2.5 was where you found the most accuracy. I just wanted to make sure one of these mentions wasn't a mistake... would you recommend starting at 1.5 or 2.5 turns out? Thanks!
This guy on ebay was 3D printing them and selling, contact him, I dont see any in his store right now, but I am sure he can make one for you, his ebay name is Geoffk
One question I got the umsrex origin and I didn’t do anything with it and started shooting it out the box maybe like a month or two later it started to release more pressure towards the end so I would be like at 2 and after two shots it would already be out of air and it wouldn’t do that when I first got it you think that’s fixable? Or is that how’s it’s supposed to be once you use for quite a bit
It could be the hammer screw because back then It would be on two and I could still use a whole mag now when it’s on 2 I’ll take one shot then the next shot to empty out then pressure and id have to go fill her back up
@@texz8004 so your issue is same problem I had with my first gun 3 weeks after I got it and I heard same issue with other people, EPT system, compressed air gets behind it and it creates more pressure on the back end. You have to contact umarex, they sent me free shipping label, I shipped it to them and week and half later brand new gun arrived on my door steps, keep your magazines :)
@nickyhustle I was the hand pump that came with it. I purchased a cheap electric pump on eBay and it fills fine, but now it leaks out after a month from sitting.
Thanks so much man! All of this really tightened up my rifle, for free! I couldn't believe how loose the rail mount and barrel screws were! The weedeater string trick blew my mind how effective it was.
Awesome. I also have new aftermarket barrel band I installed that helped even more, then when I sold my umarex I kept it, if you interested I can sell that to you, it helps to support barrel even more,
More videos with the origin please. Subbed and looking for more knowledge
Have you tried the urban GAMO .22
I did not.
FYI from the factory, my hammer screw (purchased in early October, 2024) was 1.75 turns from fully tightened.
@SuperPete In this video, at 1:50 you mention Umerex indicates this should be 1.5 turns out, but then at 3:28 you mention 2.5 was where you found the most accuracy. I just wanted to make sure one of these mentions wasn't a mistake... would you recommend starting at 1.5 or 2.5 turns out?
Thanks!
1.5 turns out from all the way in is how it comes stock 2.5 works for him. I would suggest starting at 1.5. Turns out and experimenting.
I have the avenger with similar side pull lever. But not it is getting loose. Flops around and wobblys around. Do you know how to fix this?
Great video Pete. Been awhile since you uploaded a video.
Thank you, Sir, yes, been some time.
@@SuperPete276how u been?
@@fixyaaim been good.
Do you have a link for the Monol block that you found on Ebay? I cannot find anything like that on Ebay.
The guy I bought it from has not been listing them for some time, I am not sure why. That's why you can't find it.
Where can I find that monoblock?
This guy on ebay was 3D printing them and selling, contact him, I dont see any in his store right now, but I am sure he can make one for you, his ebay name is Geoffk
Did you find it? I have one for sale if you still interested.
do you happen to know what would cause a leak from the fill hole 😊
I am not sure, possibly check valve on the fill port.
You guys want a good air rifle for the price. Get the Umarex Origin in .22 cal… best air rifle I’ve ever had in my opinion.
My fill port leak ..how to repair that ?I cant find it on the internet..Please help..
after you fill it up or during fill up?
@@SuperPete276 after filling up ..thx for replay😄
Valueable information sir, Like subed.
Thanks for the sub!
One question I got the umsrex origin and I didn’t do anything with it and started shooting it out the box maybe like a month or two later it started to release more pressure towards the end so I would be like at 2 and after two shots it would already be out of air and it wouldn’t do that when I first got it you think that’s fixable? Or is that how’s it’s supposed to be once you use for quite a bit
I use a hand pump too so I’m not sure if the hand pump is the problem which I don’t think it is
I also haven’t adjusted the hammer screw either since I got it I was late to find this video lol didn’t think anything about the hammer screw
It could be the hammer screw because back then It would be on two and I could still use a whole mag now when it’s on 2 I’ll take one shot then the next shot to empty out then pressure and id have to go fill her back up
@@texz8004 so your issue is same problem I had with my first gun 3 weeks after I got it and I heard same issue with other people, EPT system, compressed air gets behind it and it creates more pressure on the back end. You have to contact umarex, they sent me free shipping label, I shipped it to them and week and half later brand new gun arrived on my door steps, keep your magazines :)
@@SuperPete276 thank you I will contact them and telll them this 👌
My origin only gets like 20 shots per fill on medium power, in 22
Very cool video but super disappointing that all this needs to be done on a 300 buck gun . jmho .....
I have the 22 and it keeps leaking after about a week.
Twist the hose until it doesn’t leak. Could be how your inserting the hose from the pump into the port.
@nickyhustle I was the hand pump that came with it. I purchased a cheap electric pump on eBay and it fills fine, but now it leaks out after a month from sitting.