**TimeStamps** 0:00 - Ford Mondeo MK4 Diesel leak off pipe replacement (How to) 0:36 - Replacing the Leak off pipe 9:47 - Installing the new Leak off pipe
I'm so happy this is all I habe to do aha I bought a van today and then it pissed fuel oit and I checked and it was exactly same one as on here so thank you for this it's helped loads! I'll be doing it once the part comes 😊
Excellent video Chazz - If you ever find yourself doing this again the 'pain in the arse' retainer clips can be inserted into the injectors first and then just push the leak off pipe through the clip - job done..! - Windscreen is delaminating and letting water through the layers of glass so time to go, but check out the price of these heated replacements, you won't need the washer jets 'cos the price will bring tears to your eyes..!! Keep up the good work mate.
cheers for that info, i contacted my insurance to replace the screen and as its not cracked its classed as ware and tear and they can replace it but i wouldnt get much change from 300
@@ChazzCoombes That's crap news mate - bloody insurance companies. I just had my '09 S-Max done for same reason but luckily I had a 1 inch crack so got it done for £85 excess. Guys who fit it reckoned about £680 for the heated, rain sensor screen.... I have got tie wraps on my leak off pipes like your Mondeo had 'cos even though I replaced all the pipes and clips for new like yourself and removed; cleaned and reseated all the injectors, one of the buggers still used to blow off every day so keep an eye on it - hopefully you will be good but those tie wraps have never let me down..!!! - All the best, Andy
Great video! Made me realice the stupid retaining clip was not all the way in.. As I took out the broken injector.. the clip dropped near the injector hole.. I’m just hoping it won’t fit down .. I can’t find it anywhere and I’m just praying it didn’t go inside the engine 😅😅
I have an smax with the same loss of paint around the edges of the windscreen. On the back of the glass, outside the adhesive seal. It was caused by jetwashing too aggressively. It hasn't affected the sealing on the windscreen, on mine it's purely cosmetic.
Guna try this ina min. Thanks for vid. Im not sure you need to remove the pins all the out, just need to pop with screw driver then pry out. Would save dropping them.
Cheers for the comment yeah i know i was putting new ones in regardless. Its all good now tho and in my new mk4 vid you see me using a flat screwdriver behind the pins to stop them popping out.
Thanks for this , very helpful going to attempt it tomorrow... Does it matter if clips are pushed from front? After checking under my bonnet seems two clips are pushed from the front and two clips are as is.
I need a new injector for 2 and 3 now for mine mate as they are showing 1.4 at idle and the number 1 and 4 are showing 0.6 on machine and number 1 is brand new so gotta be 2 and 3 thats wrong
I’ve just realised my car which one second was driving ok then all of a sudden won’t drive above 10 mph ( fuel/ air related) has no r clips in place and therefore one / 2 keep popping out. Could this be reason car is not working? Thank u for your thoughts
@@ChazzCoombes hello mate, yes bad news garage saying clips in place , hoses staying connected. Car will idle, sometimes rev sometimes won’t, complete loss of power if attempted to drive. Doesn’t make sense as drove absolutely fine few days ago , any chance they just haven’t bled it properly? Cheers
I didnt get the car for power, just for a daily runner. The 1.8 TDCI is a reliable engine providing its serviced and looked after. I just done an oil change on it and the old oil wait till you see the colour.
![เปิดใจ “ต้นหอม ศกุนตลา” หลังโดนพาดพิงธุรกิจที่เคยทำ และผลกระทบทำถูกปลดฟ้าผ่า! | แฉ 24 ต.ค.67 [2/3]](http://i.ytimg.com/vi/vCi5OIqlxaE/mqdefault.jpg)
**TimeStamps**
0:00 - Ford Mondeo MK4 Diesel leak off pipe replacement (How to)
0:36 - Replacing the Leak off pipe
9:47 - Installing the new Leak off pipe
well done mate. Nice to see someone showing how jobs actually go with problems and dropping bits etc. refreshing!
Cheers Mike, i keep the channel real and show when i have issues.
I'm so happy this is all I habe to do aha I bought a van today and then it pissed fuel oit and I checked and it was exactly same one as on here so thank you for this it's helped loads! I'll be doing it once the part comes 😊
Lovely jubbly really clear sequences/steps, how to great thank you for your time & help m8
Really likes this video. Have to replace it and find it good to see the struggle you had with the bits :)
Great "How To" Video, well explained and well recorded. Wish me luck doing mine on my T200 connect lol
Cheers David, all.the best with your T200.
Fantastic, thanks so much, I'll approach sorting my leak off pipes with far more confidence now.
I have the exact same leak being stopped by wedging a stone behind it .. but now I'll give the pipe change a go myself thanks 😊
Thanks for posting, gonna attempt on my transit connect soon, topman. 👍
Did you buy new parts from a main dealer?
The pins looked a right pain in the arse. Another top draw vid buddy.
They was a pain.
Excellent video Chazz - If you ever find yourself doing this again the 'pain in the arse' retainer clips can be inserted into the injectors first and then just push the leak off pipe through the clip - job done..! - Windscreen is delaminating and letting water through the layers of glass so time to go, but check out the price of these heated replacements, you won't need the washer jets 'cos the price will bring tears to your eyes..!! Keep up the good work mate.
cheers for that info, i contacted my insurance to replace the screen and as its not cracked its classed as ware and tear and they can replace it but i wouldnt get much change from 300
@@ChazzCoombes That's crap news mate - bloody insurance companies. I just had my '09 S-Max done for same reason but luckily I had a 1 inch crack so got it done for £85 excess. Guys who fit it reckoned about £680 for the heated, rain sensor screen.... I have got tie wraps on my leak off pipes like your Mondeo had 'cos even though I replaced all the pipes and clips for new like yourself and removed; cleaned and reseated all the injectors, one of the buggers still used to blow off every day so keep an eye on it - hopefully you will be good but those tie wraps have never let me down..!!! - All the best, Andy
@@baytraders thats a mad price for a screen. I only.i had a crack on mine lol
You can install the clips first then push the leak off connector through the clip? Does it damage the tip?
Hi chaz good video helped me out. I had to swap mine. Lost a load a fuel last night. Thanks again
No probs Dave, glad it helped.
Great video! Made me realice the stupid retaining clip was not all the way in..
As I took out the broken injector.. the clip dropped near the injector hole.. I’m just hoping it won’t fit down .. I can’t find it anywhere and I’m just praying it didn’t go inside the engine 😅😅
Hello chazz thank's for sharing hope you are doing ok mate stay safe
Doing good ta mate, hope your well. Cheers
I have an smax with the same loss of paint around the edges of the windscreen. On the back of the glass, outside the adhesive seal. It was caused by jetwashing too aggressively. It hasn't affected the sealing on the windscreen, on mine it's purely cosmetic.
Guna try this ina min. Thanks for vid. Im not sure you need to remove the pins all the out, just need to pop with screw driver then pry out. Would save dropping them.
Cheers for the comment yeah i know i was putting new ones in regardless. Its all good now tho and in my new mk4 vid you see me using a flat screwdriver behind the pins to stop them popping out.
Thanks for this , very helpful going to attempt it tomorrow... Does it matter if clips are pushed from front? After checking under my bonnet seems two clips are pushed from the front and two clips are as is.
Hiya, id push them in from the back so they click in place fully.
Excellent video. Just a question: are those "fuel return lines?
Good job.
Cheers mate. I try lol
Its the nutty professor lol sorry bro great work
I know the hair is really bad now, lol. Hope to get it cut soon
@@ChazzCoombes I've got some clippers bro I'll sort it
@@paulmayou370 getting cut soon bro
Is that the same Engine as in the ford focus
I need a new injector for 2 and 3 now for mine mate as they are showing 1.4 at idle and the number 1 and 4 are showing 0.6 on machine and number 1 is brand new so gotta be 2 and 3 thats wrong
its french the injectos i believe are backwards 4321
I’ve just realised my car which one second was driving ok then all of a sudden won’t drive above 10 mph ( fuel/ air related) has no r clips in place and therefore one / 2 keep popping out. Could this be reason car is not working? Thank u for your thoughts
It would be a good place to start, get fuel into the engine and fingers crossed mate. Let me know how you get on
@@ChazzCoombes thanks for reply, will do 👍
@@ChazzCoombes hello mate, yes bad news garage saying clips in place , hoses staying connected. Car will idle, sometimes rev sometimes won’t, complete loss of power if attempted to drive. Doesn’t make sense as drove absolutely fine few days ago , any chance they just haven’t bled it properly? Cheers
i would replace that black thing because it was new
Crazy how mk4 gone back to such a old block lol
Good old Endura engine 😮
@@NayNay1991x yeah more realible Bud but lack power
I didnt get the car for power, just for a daily runner. The 1.8 TDCI is a reliable engine providing its serviced and looked after. I just done an oil change on it and the old oil wait till you see the colour.