With the engine flush it is recommended to pull the clutch in for a few seeconds a few times during the 10min idle time period. This will allow the flush through the clutch discs and remove gunk between the discs and steels.
After putting the liqui moly engine flush inside the engine while idling, my mechanic stupidly revved my motorcycle and I was shocked! Would that damage my engine? Thanks for your help..
Whilst it's not recommended, It shouldn't do any lasting damage. It is meant to just be left at idle RPM to circulate around the engine and do its magic, then swapped out for new fresh oil.
@@johannironfire9286 That depends if it's a 2 or 4 stroke. If it were me, I'd try and follow the instructions which say to use 20ml per 1L of oil in a 4 stroke. So if you've got 0.7 of oil, we'd suggest using 14ml of MOS2. However if using 2 stroke oil, 20 ml per 400 ml for 2-stroke oil.
Hello how are you! Excellent video! I ask you, can I put the Engine Flush motorbike only on my Yamaha Warrior 350 quad from 1998? Is something wrong with the clutch? From already thank you very much, greetings! 💪🏻👏🏻👏🏻
The oil additive put into an engine with a wet clutch, if its as good as you say it is what about clutch slip? With superbike's now pushing out over 200bhp the clutch has it all on doing its job anyway so how is this friction reducing additive going to hold up to that sort of power???
the speed aditive increases fuel octanes? or just treats the oil / fuel mixture for better performance and less friction... and, the Mos2 shooter anti friction enhances power output in the engine?
Hi ! Yes, You can use them together, for example, 'Speed' and '4T' shooters, both going into the fuel. 'Engine Flush' however is to be used on its own when changing the oil so shouldn't be used outside of these times or in conjunction with MOS2 (for example).
Hi why is the cap on your 4T additive shooter black? Shouldn’t it be blue as it is color coded blue for fuel/gas application, black for motor oil application?
Hi. Any bike is fine. Thing is, if the bike didnt have regular oil changes or if it ran conventional oil, exessive debris could get loose which could clog oil gallys and cause damage. As long as it hashad its oil changes all is fine.
Hi, Saw your reply for the comments. I have few doubts. So how often or how kms once I have to add 4T additive and speed additive ? Do I need to add both while I refill the tank every time ? Or shall I add 4T additive first fill and then speed additive for the next fill ? If yes, do I need to add 4T additives for third tank fill or when I have to use ? Please explain.
They can both be used at the same time as each other as Engine Flush goes in the Oil and 4T goes in the fuel, however, personally, I'd always start with the Engine Flush when doing an oil change - It works great
Hi, how are you? I have two harley davidson, a sportster iron 883 and a sportster seventy two. Both motorcycles year 2017 with around 26 thousand kilometers. Can I use the 4t additive shooter? Will my injectors clog if the dirt from the gasoline tank comes off for all these years and I have never used this product? Please answerme
Hi Pingu, Many thanks for getting in touch. Yes, the MOS2 additive can be used with any brand of oil, though obviously it has been engineered to be used with Liqui Moly Oils best, but its properties will enhance any oil you use it with.
Thanks for getting in touch. Whilst you can, to be the most efficient and offer the best performance we'd recommend running 4T fuel cleaner FIRST, allow it to do its thing, then you can be assured the system is clean and ready to perform at its best and then add speed addictive.
Many thanks for getting in touch. Whilst you can use both at the same time. If it were me, I'd use the fuel system cleaner. Let it clean the injectors and any other gunk in the fuel system out before putting the speed shot fuel additive in, with fresh fuel, for best performance.
Hi Devlet, Many thanks for getting in touch. Whilst you _can_ use both at the same time. If it were me, I'd use the 4T shooter with a full tank or half tank of fuel. Let it clean the injectors and any other gunk in the fuel system out before putting the speed shot fuel additive in, with fresh fuel, for best performance. As with real shots, mixing your drinks isn't recommended! ;)
![โรงเรียนตอนตี 2 โคตรหลอน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/2MAEMwqVYh8/mqdefault.jpg)
With the engine flush it is recommended to pull the clutch in for a few seeconds a few times during the 10min idle time period. This will allow the flush through the clutch discs and remove gunk between the discs and steels.
Probably the best explanation available in TH-cam for these products! 💯
Thanks for the video. I have a question - fuel system cleaner and engine performance improver can be used together?
Is it working for Scooter Yamaha Tmax 530?
What is the difference between the Liqui-Moly Motorbike Engine Flush and the Liqui-Moly 2037 Pro-Line Engine Flush?
After putting the liqui moly engine flush inside the engine while idling, my mechanic stupidly revved my motorcycle and I was shocked! Would that damage my engine? Thanks for your help..
Whilst it's not recommended, It shouldn't do any lasting damage. It is meant to just be left at idle RPM to circulate around the engine and do its magic, then swapped out for new fresh oil.
@@bikeit665 Is it okay to put all 20ml contents of liqui moly Mos2 on a 0.7 liters of oil engine? How much do you recommend?
@@johannironfire9286 That depends if it's a 2 or 4 stroke. If it were me, I'd try and follow the instructions which say to use 20ml per 1L of oil in a 4 stroke. So if you've got 0.7 of oil, we'd suggest using 14ml of MOS2. However if using 2 stroke oil, 20 ml per 400 ml for 2-stroke oil.
Does adding 4 t shooter in tank and not using the bike for a while cause any damage to the fuel filter ??
Did you get any answer
Hello how are you! Excellent video! I ask you, can I put the Engine Flush motorbike only on my Yamaha Warrior 350 quad from 1998? Is something wrong with the clutch? From already thank you very much, greetings! 💪🏻👏🏻👏🏻
The oil additive put into an engine with a wet clutch, if its as good as you say it is what about clutch slip? With superbike's now pushing out over 200bhp the clutch has it all on doing its job anyway so how is this friction reducing additive going to hold up to that sort of power???
the speed aditive increases fuel octanes? or just treats the oil / fuel mixture for better performance and less friction...
and, the Mos2 shooter anti friction enhances power output in the engine?
What's the difference between sku 5918 and sku 3824 other than the quantity?
I already used fuel additives before and want to use speed additives can i use it ?
Absolutely, you can. Now your fuel system is clean, the speed additive will work to its optimum.
Can you put this four all at once??
Hi ! Yes, You can use them together, for example, 'Speed' and '4T' shooters, both going into the fuel. 'Engine Flush' however is to be used on its own when changing the oil so shouldn't be used outside of these times or in conjunction with MOS2 (for example).
@@bikeit665 noted on this. Thanks man !
Can I use "4t additive" and "speed additive" together in one time..?
@@dhananjaywankhede5773 Yes you can.
can I use engine flush for my 20 years old motorcycle
absolutely. I'm sure your engine would benefit and love a deep internal clean.
@@bikeit665 ok thanks
Hi why is the cap on your 4T additive shooter black? Shouldn’t it be blue as it is color coded blue for fuel/gas application, black for motor oil application?
Hey can i use 4t shooter and engine flush both at samw time??
Hi there. With regards to liqui moly engine flush. Can it be used on a older bike 2004 gsxr 1000? Is it safe on seals and clutches. Thanks
Hi. Any bike is fine.
Thing is, if the bike didnt have regular oil changes or if it ran conventional oil, exessive debris could get loose which could clog oil gallys and cause damage.
As long as it hashad its oil changes all is fine.
Hi,
Saw your reply for the comments. I have few doubts. So how often or how kms once I have to add 4T additive and speed additive ? Do I need to add both while I refill the tank every time ? Or shall I add 4T additive first fill and then speed additive for the next fill ?
If yes, do I need to add 4T additives for third tank fill or when I have to use ?
Please explain.
Too bad we didnt get any explanation
Where all the dirt goes, are they being dissolved
Which one to use first.. 4t additive or engine flush?
They can both be used at the same time as each other as Engine Flush goes in the Oil and 4T goes in the fuel, however, personally, I'd always start with the Engine Flush when doing an oil change - It works great
Will this expire?
Can we use ceratec in japanese inline 4 engines ?
Hi, how are you? I have two harley davidson, a sportster iron 883 and a sportster seventy two. Both motorcycles year 2017 with around 26 thousand kilometers. Can I use the 4t additive shooter? Will my injectors clog if the dirt from the gasoline tank comes off for all these years and I have never used this product? Please answerme
Just use it.
I purchased recently an speed additive shooter which was manufactured on oct 17, seller said can be used upto 8 years. Is that true?
So long as it's still factory sealed it should be fine.
Sir how many km use engine flush, fuel system and speed please.
I do use it in every 20-25k kilometres
For the Mos2 oil additives. Is it okay mix it with other brand of engine oil?
Are these additives applicable for fresh or newer engines?
Hi Pingu, Many thanks for getting in touch. Yes, the MOS2 additive can be used with any brand of oil, though obviously it has been engineered to be used with Liqui Moly Oils best, but its properties will enhance any oil you use it with.
Can I use '4T Addictive' and 'Speed Addictive' at once?
Thanks for getting in touch. Whilst you can, to be the most efficient and offer the best performance we'd recommend running 4T fuel cleaner FIRST, allow it to do its thing, then you can be assured the system is clean and ready to perform at its best and then add speed addictive.
Can we use fuel system cleaner and speed additive simultaneously or back to back. Kindly suggest.
Many thanks for getting in touch. Whilst you can use both at the same time. If it were me, I'd use the fuel system cleaner. Let it clean the injectors and any other gunk in the fuel system out before putting the speed shot fuel additive in, with fresh fuel, for best performance.
Hey man great video,
I have a question. Can I use 4t Additive and Speed Additive at the same time?
Hi Devlet, Many thanks for getting in touch. Whilst you _can_ use both at the same time. If it were me, I'd use the 4T shooter with a full tank or half tank of fuel. Let it clean the injectors and any other gunk in the fuel system out before putting the speed shot fuel additive in, with fresh fuel, for best performance.
As with real shots, mixing your drinks isn't recommended! ;)
@@bikeit665 hahaha thanks man
@bikeit665 at how much kilometer have to put 4T additive in bike.