I have been building, fixing things since I was a young child. I consider myself very skilled at many things. very few people have I met that truly impressed me like you have. your attention to detail is incredible along with your ability to change what your building no matter how far along you are. your commitment to build the best possible van for each customer. thank you for taking the time to videotape the process of building the vans. HUMBLE ROAD is you heart and soul.
@@HumbleRoad I am making plans to insulate a semi trailer...either a reefer (since it is already insulated, and many have a stainless steel floor and aluminum wall & ceiling - so it would be easier to caulk seams to reduce offgassing from foam (although age reduces the R-value) or a Kentucky Trailer (specifically so the insulated envelope would include the water tanks to begin with and the floor above would then have access panels = thinking of double wall and ceiling insulation space so that a dehumidifier could be built in and use may small low voltage brushless fans like what is in computer to ensure air circulation on timer/pulse to prevent dead air and trapped moisture/"container rain"/etc... Considering using aluminum studs (as aluminum is said to be very resistant to mold) and Mineral wool for insulation. Considering nylon spacers & washers & grommets to reduce thermal bridging where bolts or machine screws are used to attach aluminum studs to trailer wall. Thinking about adding either foam board on the outside of the trailer wall or spray foam by a pro company and then adding an additional exterior skin to provide additional security of roofing preventing leaks to interior and offgassing concerns are slightly less of a concern, obviously this technically exceeds width however we are thinking this will be more of a base home majority of time,, and plastic/nylon bump out spacers would be used like are used on homes where foam is used on exterior. For actual interior floor walls and ceiling considering aluminum aluminum so that again welded and or 100% silicone caulk to make a secure moisture barrier and mold resistant material on which a layer of tongue and groove for finish & thermal mass or other might be used... Any thoughts? The initial need that is promoting such a concept is the need to do a mold remediation to the current home, as this may be the entire structure being gutted and treated starting at the studs, it could take considerable time and we need a functional living environment AND an escape from mold.
The fact is, you are not a builder, you are an old-world style craftsman! My father and grandfather were craftsmen, as well. I wish they were here to help me with my build, but watching you has given me so many great ideas that I feel confident that, with the help of God (and St. Joseph!), I will do fine! Thank you so much for what you do!
I just love this man. There are hundreds of these videos on you tube. They record and build and move on to the next one. George takes the time to explain every single detail and thought. Thank you for entertaining us every Sunday. And putting in the hard work during the week. Not to mention that you manage to reply to every single comment us commoners put in these blog. Again, thank you for everything. 💕💕💕💕💕💕💕
And he does it with such a pleasant, dry sense of humor. I can grab a glass of wine and watch him go on about things I'll never have to do myself and really enjoy it. That's saying something!
Yeah!!!!!!! Glad to see 'our' PleasureWay will get an update. Favorite PleasureWay episodes 1) Van Sink Surgery. 2) Think Outside the Box (deserves a TH-cam creativity award).
Aloha Always, George is to much. Best van building on the internet!!!!!!!!! Let the van talk to you!!!!!!!!! I have George and it is saying THANKS VERY MUCH.
"The van is talking if you can listen"--exactly right. "Take your time, get lost in the task, make it valuable; "It has to know where it wants to go." The agential vibrancy of the nonhuman world is honored as a norm of daily practice. Beautiful! Great to see you back and healthy, George. Thanks for finding the time to post these videos and love the images of earlier times.
Thank you so much. These advice are so valuable that not many pp talk about and just go all the way with every build that cost thousands of dollars for no reason
"Get lost in the task" has become a part of my vocabulary and i'm trying to get it to stick with my 9 year old son. It's really helped calm me down and give me patience.
So good to see you back George ,i've been forced to watch videos that have given me no information what so ever ,and taught me nothing . each time i watch your videos i learn something new .and i like the way you give a reason Why you do it that way , always makes sense . keep up the good work
Holy Cow... you are a interesting and compelling individual, instructor, and demonstrator. I love your skills, methodology, creativity, humor, and the quality of your video productions... you're addicting!!!!!!
Just how do you stay so humble with all these people singing your praises, in the comments? Thanks for not getting a swollen head and still caring about teaching us. You are the best!💕👍😊
Good to see you back! , Once again you do not disappoint. I am leaning so many things, I never thought mounting floor boards would be so interesting. Your van builds are art masterpieces. Great job!
The one thing about these videos is everything is not only explained but why he's doing it that way. Who else does that? No one. A true craftsman and educator.
Love this guy. Smart, has skills, great personality, savvy with the editing. All in all very entertaining AND highly informative with highly useful, practical information. Can't imagine who the morons are that put thumbs down on these videos. Unless they are other van builders that realize they don't have half as much on the ball as he does.
I would have to agree. This is just pure craftsmanship. It is hard to find that today. To take pride and be passionate about your builds is just amazing because it leads straight to your craftsmanship. It is just outstanding.
You sound exactly like the guy that’s been living in his little van in Seattle for 8 years! (Static Camper Van)..You could be twins ! And you sound EXACTLY like him ! Great information too ! I’m building out my sprinter here in Australia ✔️🟢… new sub 😊
I'm never going to build a van but I have the confidence that I could after watching your videos. Thanks George for being so calm and making common sense building so entertaining!
the main reason I subscribed after accidentally stubled upon your channel is the way you plan/build/proceed. It fits my style and the way you reason all your decisions is just awesome. Learning a lot with every video of yours
Hi George! Since I've bought a van 2 weeks ago, I am glad to see your videos again after a long time. I want to camperized It to sell It and I want to success with the project. I wolud make a lot of questions to you but I am Happy enough with your videos. Thanks and Gretings from Barcelona, Spain.
Love your last sentence. ❤️ “ I’m going to let serendipity guide me”. I like seeing you work on a sprinter again, both yours and the new van, it’s been a while. Every week I look forward to seeing what’s in store to educate and or entertain us viewers. I have no intention of ever building a van but appreciate learning the process and I’m certain your channel is invaluable to all the DIY’rs. I watch many channels where I’ve seen people lay down the whole floor and it looks so good. Now I know as well as many others that isn’t the best way to go. It makes perfect sense when it’s explained but until I learned it from you I had no idea. You provide invaluable information and I’m sure many are grateful for it. You are an artist 👩🎨 as well as a builder🔩🛠🚐Stay safe and healthy ❤️
I love your videos, your passion you have for your builds. I recently finished my van build. I was going to have a friend who was a professional cabinet maker help and he couldn't stand not having a cad drawing with exact measurements. I said it's a van, and I need to maximize every inch of space, the design was flexible. I drove him crazy so I bought a table-saw and built them myself! haha
Wow... Amazing video! As a car builder/hot rodder and house renovator, I'm amazed at your video.... Mainly because you work like me! That's how you build a modified car or hotrod. You design as much as you can then build it. Once you've checked, tested and ironed out every bug, you dismantle everything, remanufacture and finish everything, paint and assemble. When I've done renovations, you plan what you can but you will never know what challenges pop up until you do them, so there is always sone fluidity. I've planned layouts and designed complete electrical systems but how that gets accomplished may change as though progress. Great video!
George is one with the van. It's apparent that he is considering so many possibilities at once and slowly, but surely, zeroing in on a near-optimal build. He is truly exploring the space of possibilities. Thanks for sharing your thought process with us. It is really helpful to know not only the how or the what, but also the why.
Wow, that was unexpectedly awesome. Love the advice to "make it valuable" and to let serendipidity guide you. "It's not a process, it's an art form". Awesome work all around, on the van and the video.
man, you're like the #1 guy for van building IMO.... so much experience and knowledge here it's invaluable. Sincerely thank you for taking the time to share this with us...so frick'n helpful...
I think airflow under the floor is good on warmer days, but what about cold days? In the winter here it goes to -40°C, but even at +5°C (40°F), a single-pane window will fog up, because it's a cold surface in a heated room. I think the van floor would be cold, and if the heated air (which holds more moisture than cold air) passes by the cold steel, it would drop its moisture and possibly cause corrosion.
George: Greetings from Alabama! It’s great to see your head work. Please pardon me for saying that you have a truly beautiful mind... We salute you, maestro!
I really hope you are teaching your craftsmanship to apprentices and future generations. We love to watch and get ideas but hands on students benefit the most.
Great tip on the airflow in the floor. btw...my "1998" Dodge Xplorer XLW has the glycol system that heats the water while driving. I guess it was ahead of it's time!
So glad to have you back with us, George! Hope all is well with your health. I think I know why I like your work so much. Its high quality and cutting edge. Van conversion is such a difficult thing to do, yet you bring game changing ideas to each build. Simply amazing. I like the inside of your van a lot - so peaceful and home-like. I wish I had a Class B instead of a huge Class C. No chance of stealth or good gas mileage.
Fantastic video. You gave me some great ideas.I was stressing over the fact that I didn't have a schematic set of plans.I just wanted to feel it as I went along.
You are the Master, I love your talent and your passion for everything you talk about and do. Your a natural Teacher. So looking forward to your next video. Thanks so much.
It would an honor if you can build my dream van. I just want a simple weekend van get away but on a small Nissan NV 200. Thank you for sharing your wisdom, talent, and passion. More power to your channel.
I have a 2001 PleasureWay and I definitely need update the components such as the propane heater and water tank. I am eager to learn what your build look like. Thanks for this awesome channel. It's great to see such craftsmanship. You are an honorary industrial designer!
@@HumbleRoad Thanks for the quick reply. Let's start here. I have the following original propane components: 1. frig 2. heater 3. water heater Moving forward what would I need to consider replacing them with? I know the next thing is to consider power, electrical and solar.
@@agentbey A major renovation would include all new non-propane appliances. AC/DC fridge, or DC only… A Webasto or Espar Air heater (gas or diesel) and IMHO, an Isotemp water heater with a closed loop glycol system to make hot water while you drive. New lithium battery and a new inverter.
@@HumbleRoad With this in mind I will look to swap out the propane heater for a diesel heater. The propane water heater is only two years old and it been working great.
So happy you are back to filming. The longer video was so nice. I mostly hope you are in tip top condition and not returning to work too soon. Vans are looking good.
Glad you are feeling better. I love all your videos on CREATING a masterpiece. Your skill as a photographer is the perfect complement. I especially loved the beginning of this video regarding your love of your own PW and the exciting plans you have for her. I’ll be especially looking forward to your updates on her. I have a 2007 PW (T1N) with 28,000 miles in same floor plan with the cherry radius cabinets. I’ve sewed beautiful insulated panels for her interior windows using warm window and decorator fabric. I would like to tackle some updates as well so I’m excited to see what you do with yours.
I seem to remember, that you in one of your videos explained why you put the Webasto heater in that place, and where you draw in air from. Cannot find that video now but know that there was magic comments :-)
One of the problems I had in a van which was insulated with fiberglass in the walls. There was no airflow, and that accelerated the exterior corrosion. Another guy I watch who builds cabins, uses some sort of spacer in the walls to allow airflow between the sheathing and the insulation layer. This is something I would incorporate somehow in my next build.
You're back to firing on all cylinders, good to see! If using the adhesive on the floor doesn't create enough thermal break you could always use tabs of your sound isolation mat at the contact points of the beams and the van floor )if it would still hold well with adhesive) creating the thermal break. Can't wait to see your van's new tech.
Truly serendipitous sir! Love the way you work, sense and sensibility at it's best! Stay healthy and keep up the Awesome work and the Very Enjoyable videos. You and your family are always in our prayers. Be well, be happy and keep on being you.
As soon as these two are finished, I have two Transit 350 coming in. One is under contract, the other will be a spec build offered for sale when completed. Stay tuned!
Man! You are amazing! I wish I lived in your city because I’d love to help just to hear/see how you do things firsthand! From Texas to where you are is pretty far. 😂
i completely agree with your ideas about underfloor air-flow, and the negligible effect of the thermal bridging caused by that inorganic support structure (i.e., the aluminum tubing). 10:17 you don't really need a plenum with built-in fans, you just need to have a sealed air space at the end that all the underfloor air channels dump-into, which exits via a central vent (to keep pressure even between the sides, though the central channel will have significantly more flow) with a couple/few inline computer fans. lol, you could have a similar setup at the front, with an inline cannister for changeable desiccant material, and no mold or rust would EVER establish under there! i don't think that would be an efficient way to heat the van though, because there'd be mad thermal transmission through the metal floor. imo, really good insulation is the best way to keep a van warm (the human body gives off many watts energy, and if you have good insulation it'll really start to add-up), but ideally a dc radiant flooring system could augment.
@@HumbleRoad awesome channel! you do really nice builds and apply smart principles and creative solution. lol, i _do_ however disagree with your point about CAD programs being too mechanistic and draining the art out of the process, all plans have unforeseen problems that have to be resolved in unforeseen ways, so there's plenty of art involved...besides not everybody can make up such dope cardboard mockups as you! ;) peace
Will be intresting what you do with the floor. And that extra gap. I agree with your ways of thinking, things have to breath. Glad you are well too. All the best from the uk
I wish you had the time to visit the Sportsmobile manufacturing facilities at the different Sportsmobile locations to absorb all their techniques and materials used for their vans. They remain on the cutting edge of innovation like yourself.
Question....Why use the structural aluminum tubing under the subfloor. When you could just use styroSM or HDX high density foam board. You would have a continuous thermal break. Also adhesive will stick fine to sanded paint. Going down to metal is maybe a little overkill. Have you tried automotive s sided tape ? It's grip is very strong. Cheers love your passion and thank you for sharing.
“Focus...get lost in the task...make it valuable”. Very, very important, and well said.
draw guidance from the serendipity of the workflow
@@stephenkasirye2543 you got it........
I just found this channel. These words right here!
Yup - some call it the "Flow State"
Glad you are feeling better. This channel could easily be called "The Zen of Van Building".....
You took the words right out of my mouth. The art of/in the technic.
there is nothing under but support beams cost to much to replace
The Al Pacino of van builds
Had the exact same thought while watching George do his thing.
I have been building, fixing things since I was a young child. I consider myself very skilled at many things. very few people have I met that truly impressed me like you have. your attention to detail is incredible along with your ability to change what your building no matter how far along you are. your commitment to build the best possible van for each customer. thank you for taking the time to videotape the process of building the vans. HUMBLE ROAD is you
heart and soul.
Thank you Robert. That is a great compliment.
I feel the same way...so hard to find such quality craftsmanship and attention to detail these dayz..
Get your tongue out sir
@@HumbleRoad I am making plans to insulate a semi trailer...either a reefer (since it is already insulated, and many have a stainless steel floor and aluminum wall & ceiling - so it would be easier to caulk seams to reduce offgassing from foam (although age reduces the R-value) or a Kentucky Trailer (specifically so the insulated envelope would include the water tanks to begin with and the floor above would then have access panels = thinking of double wall and ceiling insulation space so that a dehumidifier could be built in and use may small low voltage brushless fans like what is in computer to ensure air circulation on timer/pulse to prevent dead air and trapped moisture/"container rain"/etc...
Considering using aluminum studs (as aluminum is said to be very resistant to mold) and Mineral wool for insulation. Considering nylon spacers & washers & grommets to reduce thermal bridging where bolts or machine screws are used to attach aluminum studs to trailer wall. Thinking about adding either foam board on the outside of the trailer wall or spray foam by a pro company and then adding an additional exterior skin to provide additional security of roofing preventing leaks to interior and offgassing concerns are slightly less of a concern, obviously this technically exceeds width however we are thinking this will be more of a base home majority of time,, and plastic/nylon bump out spacers would be used like are used on homes where foam is used on exterior.
For actual interior floor walls and ceiling considering aluminum aluminum so that again welded and or 100% silicone caulk to make a secure moisture barrier and mold resistant material on which a layer of tongue and groove for finish & thermal mass or other might be used...
Any thoughts?
The initial need that is promoting such a concept is the need to do a mold remediation to the current home, as this may be the entire structure being gutted and treated starting at the studs, it could take considerable time and we need a functional living environment AND an escape from mold.
The fact is, you are not a builder, you are an old-world style craftsman! My father and grandfather were craftsmen, as well. I wish they were here to help me with my build, but watching you has given me so many great ideas that I feel confident that, with the help of God (and St. Joseph!), I will do fine! Thank you so much for what you do!
I just love this man. There are hundreds of these videos on you tube. They record and build and move on to the next one.
George takes the time to explain every single detail and thought.
Thank you for entertaining us every Sunday. And putting in the hard work during the week.
Not to mention that you manage to reply to every single comment us commoners put in these blog.
Again, thank you for everything.
💕💕💕💕💕💕💕
Thank you for noticing, Maggie! ❤️
And he does it with such a pleasant, dry sense of humor. I can grab a glass of wine and watch him go on about things I'll never have to do myself and really enjoy it. That's saying something!
Amen 🙏🏼
You are the Gandalf of van builds, wise and all-knowing!
Yeah!!!!!!! Glad to see 'our' PleasureWay will get an update. Favorite PleasureWay episodes 1) Van Sink Surgery. 2) Think Outside the Box (deserves a TH-cam creativity award).
Aloha Always, George is to much. Best van building on the internet!!!!!!!!! Let the van talk to you!!!!!!!!! I have George and it is saying THANKS VERY MUCH.
I think I found my new favorite van page
Welcome to Humble Road! Now take the whole day and binge watch ALL my videos! Go ahead, we'll wait for you! 😁
"The van is talking if you can listen"--exactly right. "Take your time, get lost in the task, make it valuable; "It has to know where it wants to go." The agential vibrancy of the nonhuman world is honored as a norm of daily practice. Beautiful! Great to see you back and healthy, George. Thanks for finding the time to post these videos and love the images of earlier times.
Thank you so much. These advice are so valuable that not many pp talk about and just go all the way with every build that cost thousands of dollars for no reason
George great to see you feeling better. Just like the old saying is haste makes waste. Thanks again for the Sunday video George. Take care.
"Get lost in the task" has become a part of my vocabulary and i'm trying to get it to stick with my 9 year old son. It's really helped calm me down and give me patience.
You are a truly good teacher ! Glad I found you here
When he said the interior is “fabulous” he wasn’t lying!
So good to see you back George ,i've been forced to watch videos that have given me no information what so ever ,and taught me nothing . each time i watch your videos i learn something new .and i like the way you give a reason Why you do it that way , always makes sense . keep up the good work
Is it not 'amazing' to watch YT Videos in the same subject category and feel like one has descended into mediocrity? George has ruined us 🤓 forever
@@anthonycbrown1952 i feel like its TH-cam for grown ups
It's not just about building great rv's. This man knows how to live life. Subscribed!
Welcome to Humble Road!
Holy Cow... you are a interesting and compelling individual, instructor, and demonstrator. I love your skills, methodology, creativity, humor, and the quality of your video productions... you're addicting!!!!!!
Wow, thank you! Welcome to Humble Road!
I could imagine working at this guys shop. I would learn a lot.
Just how do you stay so humble with all these people singing your praises, in the comments? Thanks for not getting a swollen head and still caring about teaching us. You are the best!💕👍😊
I love this guy. Down to earth and straight forward.
Good to see you back! , Once again you do not disappoint. I am leaning so many things, I never thought mounting floor boards would be so interesting. Your van builds are art masterpieces. Great job!
The one thing about these videos is everything is not only explained but why he's doing it that way. Who else does that? No one. A true craftsman and educator.
Love this guy. Smart, has skills, great personality, savvy with the editing.
All in all very entertaining AND highly informative with highly useful, practical information.
Can't imagine who the morons are that put thumbs down on these videos. Unless they are other van builders that realize they don't have half as much on the ball as he does.
Much appreciated! Thank you!
I would have to agree. This is just pure craftsmanship. It is hard to find that today. To take pride and be passionate about your builds is just amazing because it leads straight to your craftsmanship. It is just outstanding.
It may be ten years (or never) before I use any of what I learn here in building a van. But for if and when I do: Thank you George. Stay well.
You sound exactly like the guy that’s been living in his little van in Seattle for 8 years! (Static Camper Van)..You could be twins ! And you sound EXACTLY like him ! Great information too ! I’m building out my sprinter here in Australia ✔️🟢… new sub 😊
I'm never going to build a van but I have the confidence that I could after watching your videos. Thanks George for being so calm and making common sense building so entertaining!
Best video yet on sub-foors
Thank you for the longer video. Loving the r&d for air flow management in floor!
the main reason I subscribed after accidentally stubled upon your channel is the way you plan/build/proceed. It fits my style and the way you reason all your decisions is just awesome. Learning a lot with every video of yours
Hi George! Since I've bought a van 2 weeks ago, I am glad to see your videos again after a long time. I want to camperized It to sell It and I want to success with the project. I wolud make a lot of questions to you but I am Happy enough with your videos.
Thanks and Gretings from Barcelona, Spain.
Go for it!💪🏼👍
Thank you for sharing your knowledge, made a lot of sense to me and I love how you present it! Thanks again!
Just bought a 2015 Promaster 2500 and can't wait to get started. Thanks for the great videos!
Good luck!
Love your last sentence. ❤️ “ I’m going to let serendipity guide me”. I like seeing you work on a sprinter again, both yours and the new van, it’s been a while. Every week I look forward to seeing what’s in store to educate and or entertain us viewers. I have no intention of ever building a van but appreciate learning the process and I’m certain your channel is invaluable to all the DIY’rs. I watch many channels where I’ve seen people lay down the whole floor and it looks so good. Now I know as well as many others that isn’t the best way to go. It makes perfect sense when it’s explained but until I learned it from you I had no idea. You provide invaluable information and I’m sure many are grateful for it. You are an artist 👩🎨 as well as a builder🔩🛠🚐Stay safe and healthy ❤️
Thank you Maitilda. You have always offered such insight in your comments, I would love to build a van for you!
I love your videos, your passion you have for your builds. I recently finished my van build. I was going to have a friend who was a professional cabinet maker help and he couldn't stand not having a cad drawing with exact measurements. I said it's a van, and I need to maximize every inch of space, the design was flexible. I drove him crazy so I bought a table-saw and built them myself! haha
Good to have you back George. We enjoy your videos, you enjoy your work !
You Rock Sir, Thank you for sharing your knowledge, wisdom and mistakes!
You're a great teacher.
God Be with You, always..
💓💟☮️
Thank you for this master class. Glad you are feeling better.
I am!
Wow... Amazing video! As a car builder/hot rodder and house renovator, I'm amazed at your video.... Mainly because you work like me! That's how you build a modified car or hotrod. You design as much as you can then build it. Once you've checked, tested and ironed out every bug, you dismantle everything, remanufacture and finish everything, paint and assemble. When I've done renovations, you plan what you can but you will never know what challenges pop up until you do them, so there is always sone fluidity. I've planned layouts and designed complete electrical systems but how that gets accomplished may change as though progress. Great video!
George is one with the van.
It's apparent that he is considering so many possibilities at once and slowly, but surely, zeroing in on a near-optimal build.
He is truly exploring the space of possibilities.
Thanks for sharing your thought process with us. It is really helpful to know not only the how or the what, but also the why.
Patience, focus and accuracy. Don't rush.
Wow, that was unexpectedly awesome. Love the advice to "make it valuable" and to let serendipidity guide you. "It's not a process, it's an art form". Awesome work all around, on the van and the video.
man, you're like the #1 guy for van building IMO.... so much experience and knowledge here it's invaluable. Sincerely thank you for taking the time to share this with us...so frick'n helpful...
I think airflow under the floor is good on warmer days, but what about cold days? In the winter here it goes to -40°C, but even at +5°C (40°F), a single-pane window will fog up, because it's a cold surface in a heated room. I think the van floor would be cold, and if the heated air (which holds more moisture than cold air) passes by the cold steel, it would drop its moisture and possibly cause corrosion.
I relate to your work philosophy. Great content. 😊
We’re watching a humble legend build a company from the ground up. It’s going to be big and it’s going to be sustained.
Well done sir.
I really enjoy these videos on building a van. Thank you, for taking the time.
Your teaching is wonderful. Thank you!
You are such an inspiration! I love your creative mind and thoughtful designs.
Thank you so much!
George: Greetings from Alabama! It’s great to see your head work. Please pardon me for saying that you have a truly beautiful mind... We salute you, maestro!
Thanks 👍
I really hope you are teaching your craftsmanship to apprentices and future generations. We love to watch and get ideas but hands on students benefit the most.
Great tip on the airflow in the floor. btw...my "1998" Dodge Xplorer XLW has the glycol system that heats the water while driving. I guess it was ahead of it's time!
Yeah, no doubt, you're an amazing builder. Thanks for all you freely give. You're a rare man, man! Thanks again.
I appreciate that!
So glad to have you back with us, George! Hope all is well with your health. I think I know why I like your work so much. Its high quality and cutting edge. Van conversion is such a difficult thing to do, yet you bring game changing ideas to each build. Simply amazing.
I like the inside of your van a lot - so peaceful and home-like. I wish I had a Class B instead of a huge Class C. No chance of stealth or good gas mileage.
Another great video from the Ram MASTER
😁
Fantastic video.
You gave me some great ideas.I was stressing over the fact that I didn't have a schematic set of plans.I just wanted to feel it as I went along.
Missed you George. Glad you are feeling better. Can't wait to see what comes next... Suspense is killing me.
"let serendipity guide you", something we come to understand with age hopefully.
Thanks!
Thank you!
You are the Master, I love your talent and your passion for everything you talk about and do. Your a natural Teacher. So looking forward to your next video. Thanks so much.
It would an honor if you can build my dream van. I just want a simple weekend van get away but on a small Nissan NV 200. Thank you for sharing your wisdom, talent, and passion. More power to your channel.
I have a 2001 PleasureWay and I definitely need update the components such as the propane heater and water tank. I am eager to learn what your build look like. Thanks for this awesome channel. It's great to see such craftsmanship. You are an honorary industrial designer!
Hit me up with your questions. I would avoid propane
@@HumbleRoad Thanks for the quick reply.
Let's start here. I have the following original propane components:
1. frig
2. heater
3. water heater
Moving forward what would I need to consider replacing them with?
I know the next thing is to consider power, electrical and solar.
@@agentbey A major renovation would include all new non-propane appliances. AC/DC fridge, or DC only… A Webasto or Espar Air heater (gas or diesel) and IMHO, an Isotemp water heater with a closed loop glycol system to make hot water while you drive. New lithium battery and a new inverter.
If you’d rather keep it simple then replace propane components with new and replace tank and regulator
@@HumbleRoad With this in mind I will look to swap out the propane heater for a diesel heater. The propane water heater is only two years old and it been working great.
Thank you soooo much. You are such a great teacher!
Best videos on the Internet. Hands down!
So happy you are back to filming. The longer video was so nice. I mostly hope you are in tip top condition and not returning to work too soon. Vans are looking good.
Been doing the van camping thing for years, your videos are some of the most informative out there. Really enjoy the details.
Thanks! I like your process. It makes sense to me. I am going to build a van. I always learn so much from your videos.
Glad to help! Good luck!
Thanks for all the amazing advices!! I'm almost done with my ford transit 🎉🎉
“Every shortcut you take, multiplies as you get further down the line”. Words to live by.
glad to see you feel better. take care, don’t over work
Such an informative video! Thank you for taking the one to make it!!!
Glad you are feeling better. I love all your videos on CREATING a masterpiece. Your skill as a photographer is the perfect complement. I especially loved the beginning of this video regarding your love of your own PW and the exciting plans you have for her. I’ll be especially looking forward to your updates on her. I have a 2007 PW (T1N) with 28,000 miles in same floor plan with the cherry radius cabinets. I’ve sewed beautiful insulated panels for her interior windows using warm window and decorator fabric. I would like to tackle some updates as well so I’m excited to see what you do with yours.
I'm thinking these upgrades can bring back many an older PW. Stay tuned.
I seem to remember, that you in one of your videos explained why you put the Webasto heater in that place, and where you draw in air from. Cannot find that video now but know that there was magic comments :-)
One of the problems I had in a van which was insulated with fiberglass in the walls. There was no airflow, and that accelerated the exterior corrosion. Another guy I watch who builds cabins, uses some sort of spacer in the walls to allow airflow between the sheathing and the insulation layer. This is something I would incorporate somehow in my next build.
Hey George, if the van is talking to you, you might want to see a shrink! 😂
All joking aside, I really enjoy your videos and your humor.
This is such an insightful peak at how you should build a van :)
AWESOME!!!! I am waiting for my van to arrive, and have never built one out before, EXCELLENT info THANK YOU!
The van is trying to talk with you here. Yes, 'Be One With The Van'. Magnificat. I AM VAN...and VAN IS ME.
You're back to firing on all cylinders, good to see!
If using the adhesive on the floor doesn't create enough thermal break you could always use tabs of your sound isolation mat at the contact points of the beams and the van floor )if it would still hold well with adhesive) creating the thermal break.
Can't wait to see your van's new tech.
Loved the video. As always, you are a wonderful teacher. Your patience is truly remarkable. Be blessed and safe.
He’s baaack! 🤗
Ive learned more from you about building a van, in one video than i have in ten years building my own. Thank you so much! Xo
Thanks for the video!
Thank you for your info. Big help your great
Truly serendipitous sir! Love the way you work, sense and sensibility at it's best! Stay healthy and keep up the Awesome work and the Very Enjoyable videos. You and your family are always in our prayers. Be well, be happy and keep on being you.
Good point on building the shower box inside the drip pan or whatever.
I am happy to see you back George. I am waiting to watch the conversion for Ford Transit 350 High Roof Extended. I hope soon
As soon as these two are finished, I have two Transit 350 coming in. One is under contract, the other will be a spec build offered for sale when completed. Stay tuned!
Humble Road ......I’d like to see a transit medium roof 148wb
Man! You are amazing! I wish I lived in your city because I’d love to help just to hear/see how you do things firsthand! From Texas to where you are is pretty far. 😂
I appreciate that!
i completely agree with your ideas about underfloor air-flow, and the negligible effect of the thermal bridging caused by that inorganic support structure (i.e., the aluminum tubing). 10:17 you don't really need a plenum with built-in fans, you just need to have a sealed air space at the end that all the underfloor air channels dump-into, which exits via a central vent (to keep pressure even between the sides, though the central channel will have significantly more flow) with a couple/few inline computer fans. lol, you could have a similar setup at the front, with an inline cannister for changeable desiccant material, and no mold or rust would EVER establish under there! i don't think that would be an efficient way to heat the van though, because there'd be mad thermal transmission through the metal floor. imo, really good insulation is the best way to keep a van warm (the human body gives off many watts energy, and if you have good insulation it'll really start to add-up), but ideally a dc radiant flooring system could augment.
Douglas Harley agreed! Thank you 😊
@@HumbleRoad awesome channel! you do really nice builds and apply smart principles and creative solution. lol, i _do_ however disagree with your point about CAD programs being too mechanistic and draining the art out of the process, all plans have unforeseen problems that have to be resolved in unforeseen ways, so there's plenty of art involved...besides not everybody can make up such dope cardboard mockups as you! ;) peace
No disrespect! You know I'm only kidding. Half kidding... 🤣
@@HumbleRoad lol xD
Love it George...as always...beautiful workmanship plus entertainment!!! Doesn’t get any better than this!
Will be intresting what you do with the floor. And that extra gap. I agree with your ways of thinking, things have to breath. Glad you are well too. All the best from the uk
Another great video George
Glad you enjoyed it
Thank you for this I really needed it.
Directions like this are awesome and important Thank you
Glad it was helpful!
Thank you for everything George
Soo many good ideas.
I wish you had the time to visit the Sportsmobile manufacturing facilities at the different Sportsmobile locations to absorb all their techniques and materials used for their vans. They remain on the cutting edge of innovation like yourself.
Thank you George! So amazing build love it! 👍😍
Question....Why use the structural aluminum tubing under the subfloor. When you could just use styroSM or HDX high density foam board.
You would have a continuous thermal break.
Also adhesive will stick fine to sanded paint. Going down to metal is maybe a little overkill.
Have you tried automotive s sided tape ? It's grip is very strong.
Cheers love your passion and thank you for sharing.
REALLY great advice! Thank you for sharing!
You are so welcome!