@@vinnierolla there’s many videos on the topic, this one pretty much sums it up with a similar situation as yours, converting an NA engine to turbo charging on a 4AGE. Too little gap will undoubtedly cause the rings to bind inside the cylinder walls causing ring land failure. Too large of course causes excessive blowby but if you follow the formula shown in the video you’ll find a happy medium. A good catch can will help as well. th-cam.com/video/hJBlMMES77I/w-d-xo.html
@@vinnierolla I’m also wondering about the balance of your reciprocating assembly, now that you’ve upgraded the rods, being forged H-beams they’re likely heavier which will no doubt cause an imbalance
Thank you very much for sharing your knowledge,,watching from the PHILIPPINES
Your welcome. 🙏
This is good proper build Toyota k engine
Thanks mate
Thank for sharing the manual...
been a while........been waiting for ages man for this build
Yeah it’s been slow going but fingers crossed it’s gonna speed up
Happy to see new videos bro, hope i can make make project soon 7k tamaraw fx💪
Cant wait for part 2 ♥️ amazing work
Thank you. 😀
You're Back😂
Yeah and pumped to get this engine running on the Corolla.
Nice been waiting for this, I hope you increased the ring gap for boost
Nope I’ve made all the gaps standard spec. How much are you meant to increase by?
@@vinnierolla there’s many videos on the topic, this one pretty much sums it up with a similar situation as yours, converting an NA engine to turbo charging on a 4AGE.
Too little gap will undoubtedly cause the rings to bind inside the cylinder walls causing ring land failure. Too large of course causes excessive blowby but if you follow the formula shown in the video you’ll find a happy medium. A good catch can will help as well.
th-cam.com/video/hJBlMMES77I/w-d-xo.html
@@vinnierolla I’m also wondering about the balance of your reciprocating assembly, now that you’ve upgraded the rods, being forged H-beams they’re likely heavier which will no doubt cause an imbalance
@@rlscustoms good point dude. I guess We’ll find out if it cause’s an issue. I hope it’ll be ok. Will do a bit more research on it. Cheers
Waiting for the part 2 😀
It’s getting closer. Engine pretty much complete. Can’t wait to get it in the car
Comment trouver la presse à soupape
Been waiting for this vid for ages bro. Good to see your beard growing over the course of 30 minutes!!!
Keep it up mate.
Lol yeah I taken my time with it 😂
Hopefully the build starts getting up momentum again
Hi sir, subscribed to your channel and I hit the bell icon :). I have the same engine a 7K efi. This engine is common in the Philippines.
Thanks Raff for your supports.
Which lsd ratio is best for 7k engine with 2c gearbox?
Sorry bro I have not sure. Are you using for drag racing or drifting?
@@vinnierolla for both
How many Ks where on that engine before you cleaned it up?
Have no exact figure from the wrecker. But by the condition, my guess is at least 300,000+
What rod size you're using?
They are 7AFE rods. I don’t know the exact size
Bro with 7k engine witch menvel gear 5speed req
I will be using k50 5 speed
Bro waiting for part 2 plz upload soon ❤
Thanks bro. I got to finish it first before I upload 😆
Good to see it moving along bro. What manifold gaskets are you using?
Standard 7k gaskets
Turbo size and witch car turbo req
T28 turbo and a malpassi fueal regulator
❤❤
Bro I hav also 7k engine can y guaid me for piston and cont rod
Maxspeeding rods. Just generic pistons
👍👍👍
У нас по моторам 7к вообще нет никаких видео. Не распространен мотор