BMW F10 550i Electronic Shifter Neutral override

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ส.ค. 2024
  • This is a quick little procedure on how to engage Neutral on a BMW F model 5 series, if the car has power but does not start.
    On my 550i there was no plastic transmission key in the trunk, and there is no way to unlock the transmission under the cup-holder.
    Lifting the car, climbing under and dismantling portion of the undercarriage is not really an option on the side of a major highway either.
    I did a lot of searching and found a procedure on Bimmerfest from tim330i , which seemed to do the trick. Tim if you ever see this video, Thank you.
    The procedure Is:
    1. Turn on ignition
    2. Press and hold brake, and hold it for the remainder of the steps
    3. Press the Start/Stop button (starter will engage)
    4. Press the unlock button on the shifter and move it to Neutral and hold it there until a transmission error is displayed.
    5. Release the shifter, and immediately re-select Neutral
    6. If Neutral is displayed on the shifter you can release the brake and the shifter, now you are in Neutral
    To re-engage Park, either turn off the ignition or select Park .
    Good luck, this should buy you enough time to pull the car safely onto a flatbed tow-truck. DO NOT tow the car like this without a flatbed, as park may re-engage after 10 minutes or so or if the battery runs low.

ความคิดเห็น • 59

  • @jimflood6948
    @jimflood6948 ปีที่แล้ว +3

    Thank you so much for making this video. I was broke down in the middle of a construction project and no one could get around my vehicle. I was aware of the screw under the vehicle but was unaware of the unlock feature with the gear shifter. I watched your video and was able to get pushed off of the road into a safe area until the tow truck arrived. Thanks again.

  • @ceddy1031
    @ceddy1031 3 ปีที่แล้ว +5

    It works cause your car still can crank. My starter failed and it won't crank at all, it will not allow you to swift to Neutral mode.

  • @Na7ure
    @Na7ure ปีที่แล้ว +1

    Yeah this video is a life saver. A 550i I wanted to buy has the high pressure pump die on it

  • @johnking8507
    @johnking8507 3 ปีที่แล้ว +4

    This video saved my life! I was stuck in the middle of the street! It wasn't working at first but i managed to get it to work. Thank yo

  • @badbadbadkarma12
    @badbadbadkarma12 3 ปีที่แล้ว +4

    Just to let you guys know this is the whong way to do this. There is a shift lock override it's legally required. He lifted the wrong bezel on this particular car it's under the bezel around the shift knob itself.

    • @ernietab7714
      @ernietab7714 2 ปีที่แล้ว +1

      Not in this model....this is the only way if you talking different model than yes I have also 535 Xi 2011

    • @pri0r_t0_a_weekago...fukwi48
      @pri0r_t0_a_weekago...fukwi48 2 ปีที่แล้ว

      That’s bullshit, nothing there

    • @amacneal76
      @amacneal76 ปีที่แล้ว

      No it's stupid but the shift override is under the car very poor design

  • @davidut55
    @davidut55 5 ปีที่แล้ว +4

    In my case the engine hydrolocked in a flood, so i cant crank the engine. Just put some oil on the rear tires and just pull it like that on the tow truck. Did not have anything else to do, anyway engine seems to be fine, no knocks. Changed the oil and filter. Water got in from a 6mm drain hole on the driver under seat speaker, about 2l. Dried for 2 days and all is good.
    Someone said there is a bolt on the transmission that unlocks to N, did not check that. Car is a 530xd n57 190kw.
    I removed glow plugs cranked the engine with intake hose disconected until all water got out, refit glow plugs started the engine and more water came out of the intercooler about 1l.

  • @nonyabisnas
    @nonyabisnas ปีที่แล้ว +1

    Thank you for the help, but If your engine doesn't crank, it won't work

  • @snarther1
    @snarther1 2 ปีที่แล้ว +1

    Thanke you very much i had forgotten how to do it like this :)

  • @TowMansBuilds
    @TowMansBuilds 3 ปีที่แล้ว +1

    Only works if the engine cranks. Good info but if the engine doesn’t crank it will stay in park. At that moment you’re gonna have to use skates to drag the vehicle onto the bed, wheel lift it on dollies or just wheel lift it backwards and tie the steering wheel.

    • @ernietab7714
      @ernietab7714 2 ปีที่แล้ว

      You can pull tout the fuel pump fuse and starter relay you need only the power to ecu and good to go to push the car around

  • @aneesarose9899
    @aneesarose9899 4 ปีที่แล้ว +4

    This video literally saved my life and 200$ thank you 🙏🙏🙏🙏🙏

  • @talmadgeperkins3856
    @talmadgeperkins3856 6 ปีที่แล้ว +4

    This video is excellent. Very helpful. Thumbs up sir 👍🏽

    • @Gooberis
      @Gooberis  6 ปีที่แล้ว +2

      Hope it helped out.

  • @eufnocem
    @eufnocem 2 ปีที่แล้ว +1

    Thank you

  • @dra314
    @dra314 3 ปีที่แล้ว +1

    Thank You so much an elder lady car stopped in the b middle of the road but this video saves so much time

  • @Rob-ke1vf
    @Rob-ke1vf ปีที่แล้ว +1

    It worked for me. thanks

  • @shoaibmanhas
    @shoaibmanhas 3 ปีที่แล้ว +1

    Saved my life.

  • @minasakopian1220
    @minasakopian1220 4 ปีที่แล้ว +2

    Bravo you’re awesome Technician !!!!!!

  • @kjhnsn7296
    @kjhnsn7296 ปีที่แล้ว

    And THIS is the problem with non mechanical shifters.

  • @bildillamagasin
    @bildillamagasin 4 ปีที่แล้ว +1

    Nice video!

  • @Top_g80comp
    @Top_g80comp 5 ปีที่แล้ว +2

    Great tip

  • @MrHudder4
    @MrHudder4 4 ปีที่แล้ว +2

    That helped alot thanks!

  • @bigfouch02
    @bigfouch02 3 ปีที่แล้ว +1

    Thanks man!!!

  • @bmwsincekid
    @bmwsincekid 5 ปีที่แล้ว +2

    God bless u sir

  • @theseajayapartments7371
    @theseajayapartments7371 5 ปีที่แล้ว +2

    Thank You!

    • @Gooberis
      @Gooberis  5 ปีที่แล้ว

      The Sea Jay Apartments you are welcome, glad I could help

  • @jav7737
    @jav7737 6 ปีที่แล้ว +2

    Thumbs up to you sir !

  • @eliza1670
    @eliza1670 3 ปีที่แล้ว +2

    How did you remove the cup holder without removing the center console trim

  • @angelavila4578
    @angelavila4578 2 ปีที่แล้ว

    Heaven sent

  • @jameslangston2454
    @jameslangston2454 5 ปีที่แล้ว +2

    Thanks for passing along that info!!

  • @english5050
    @english5050 4 ปีที่แล้ว +2

    Or lay under the stupid vehicle and put it neutral so it can run over you so you or your family can sue BMW cooperation.
    It's the dumbest shyt I've ever come across from I've been Towing cars.
    Wtf is wrong with BMW...?
    It's not like they make a vehicle that doesn't breakdown.

  • @adamstone3433
    @adamstone3433 5 ปีที่แล้ว +2

    Thank You

  • @_jay_oh
    @_jay_oh 3 ปีที่แล้ว

    Awesome! Thanks 👍🏽

  • @GP-007
    @GP-007 4 ปีที่แล้ว

    But if the car dont rotate starter,
    this procedure don’t work I try on my bmw x3 f25 8 speed automatic jan 2015 build .
    My starter is over and dont let me put in Neutral. I putt in N from under the car i screw a bolt from automatic transmission and i have a god battery , all lights was working fine ,trying even to jump start
    Sorry for my english

    • @Gooberis
      @Gooberis  3 ปีที่แล้ว +2

      I am sorry if the procedure didnt work for you, I was able to get it to work on an X3 but I think it was a little bit of an older model than yours. if it didnt work, you may have the big red key option under the cup holder

    • @GP-007
      @GP-007 3 ปีที่แล้ว

      Gooberis
      no problem no need to sorry about this just saying this to help others
      Thank you for sharing your experience

  • @eadame18
    @eadame18 5 ปีที่แล้ว +1

    Did you get your car fixed. Minds have the same issues dont know what it is.

    • @Gooberis
      @Gooberis  5 ปีที่แล้ว +1

      I did, it was the low pressure fuel pump for me.

  • @pridetouchmotorsbmw3891
    @pridetouchmotorsbmw3891 2 ปีที่แล้ว

    Yes boss

  • @IRTermite
    @IRTermite 2 ปีที่แล้ว

    And if it doesn't crank? Same issue... no white tab under cup holder.

    • @Gooberis
      @Gooberis  2 ปีที่แล้ว +1

      There is a guy up in the comments that claims there is an override under the shift bezel, but I never found that on this car. sadly If the car doesn't crank you are probably gonna have to muck around with the transmission lock screw under the car, or use dolleys to move the car around. Flat bed Tow-trucks will have wheel skids to help them get the car up on the bed. Frankly I hope the guy above in the comments is correct, and there is a release switch like on the e90 type transmissions. Good luck.

    • @IRTermite
      @IRTermite 2 ปีที่แล้ว

      @@Gooberis dang... yea, I can't seem to get the bezel off or find the switch. Guess it's time to drag it out of the grass and crawl under.

  • @brahim21261
    @brahim21261 5 ปีที่แล้ว +2

    You have to talk louder next time because I don't hear you good. Thank you

    • @Gooberis
      @Gooberis  5 ปีที่แล้ว

      brahim b yeah, sorry, I do tend to mumble lol but hope you were able to get the instructions, I also left a step by step in the description

  • @Trump-The-GREATEST
    @Trump-The-GREATEST 4 ปีที่แล้ว

    What! Still don't get this sheeet... 🤔

  • @Hmmm313
    @Hmmm313 3 ปีที่แล้ว

    what about if the car wont crank????

    • @Gooberis
      @Gooberis  3 ปีที่แล้ว

      Unfortunately this only works if your car cranks over, I have performed this on my car as well as on an X5 and an X3.

  • @strikeryachts
    @strikeryachts 4 ปีที่แล้ว +2

    BMW is stupid, no release like earlier models.

  • @system_m
    @system_m 2 ปีที่แล้ว

    wtf. bmw, why!?!

  • @AlexRodriguez-rw6bi
    @AlexRodriguez-rw6bi 5 ปีที่แล้ว

    What's the mileage on it? I got a 2015 with 40000

    • @Gooberis
      @Gooberis  5 ปีที่แล้ว

      I got over 170000 KM or just over 100k miles.

    • @AlexRodriguez-rw6bi
      @AlexRodriguez-rw6bi 5 ปีที่แล้ว

      @@Gooberis I see thanks for sharing👌