Thanks, it worked. Now my aftermarket bluetooth adapter turns off with the car and I don't have to worry about my phone staying paired and also draining the battery. Thanks again.
This is genius, great video. Can't wait to try it. I have a 2022 Ram truck and I believe my dashcam and radar detector are killing my battery because of the 12V outlet. I am fairly sure. It is drawing about 4-5amps when the truck is shutoff - I cannot understand why but thats what it is. I am going to Lowes and getting some wire to try this myself. Hopefully, it will stop the battery drain
Would this work with keyless ignition? I hate that the 12v outlets on my 2013 Ford Explorer and 2017 Ford Escape have power all the time, yet that is not the case with my 2016 Nissan Rogue.
Hi Mohammed, I was about to do the same thing in my car but the concern I have is are all empty or not empty spots on fuses box are able to tolerate 20 Amp ? I am using a dashcam and 120 v inverter.
Hi man, really thanks a lot for the tutorial but I'm wondering, how did u get the "half" fuse? Did u buy it or did u break it? (If broken, how much ampere was it and does is have to be broken a special/specific way)? Hope you can help me out :)
How to figure out which side of fuse is connected to battery and the other side to aux device....IF you do not have battery nearby for multimeter negative connection or wire positive connection. Eg my battery is in front and the fuse box in trunk.
@@jmohammed4936 thanks for the reply. I have another issue now. :-)... Tried to push multimeter leads in and now the fuse won't stay in and fall out. Btw I checked many slots using wire to make a complete connection. Ones marked unused or in use for audio or sound, nothing was able to light up lighter slot with or without ignition/engine on. I am just hoping to solve the loose fuse slot issue without changing the whole fusebox. I tried putting in a metal piece, it worked but it was a ugly solution, trying to make it hold the fuse by itself somehow.
True, but this is not what this is about. It's the dashcams that stay on when the car is parked, and do NOT work when the car is started due to overheating, memory full, or they mess up with the phone app.
I'm actually looking at this to reverse engineer it on my car... I'm wiring it up so the lighter stays on at all times so my phone can charge when I leave it in the car and I'm not driving.
It’s not the cigarette lighter per se by itself it’s if you have a charger in there and forget to unplug it when you turn off the car. I can confirm it doesn’t take a whole lot of charging something with the car off to start causing problems.
Thanks a million bro I followed your instructions step by step and fixed the issue you're the greatest 💪🏾
Thanks, it worked. Now my aftermarket bluetooth adapter turns off with the car and I don't have to worry about my phone staying paired and also draining the battery. Thanks again.
Just what I was looking for. Thanks for making it simple
OMG Thank you for this!!! Freaking American car manufacturers haven't yet figured out they need to make at least ONE ACC port switched
you are most welcome
Jeep Wranglers have 2 fuse slots to change the states, all u do is move the fuse.
Thank God you are the best explanation 🙌
THANK YOU SO MUCH...I searched all over the internet for this..
Helped me a lot. Thanks!
This is genius, great video. Can't wait to try it.
I have a 2022 Ram truck and I believe my dashcam and radar detector are killing my battery because of the 12V outlet. I am fairly sure. It is drawing about 4-5amps when the truck is shutoff - I cannot understand why but thats what it is. I am going to Lowes and getting some wire to try this myself. Hopefully, it will stop the battery drain
Great job..thnx
Useful tutorial
what cable did you use to connect the two fuses?
Thank you for teaching me
welcome 🙏
Nice 👍 bouta try it
What if you don’t have another working open spot?
First ever TH-cam video where something really worked thank you
😂😂😂welcome
Would this work with keyless ignition? I hate that the 12v outlets on my 2013 Ford Explorer and 2017 Ford Escape have power all the time, yet that is not the case with my 2016 Nissan Rogue.
yes it should work
it would work with keyless too
Hi Mohammed, I was about to do the same thing in my car but the concern I have is are all empty or not empty spots on fuses box are able to tolerate 20 Amp ? I am using a dashcam and 120 v inverter.
hi
I'm not sure I could help with that but ur best chance is to find a spot that already has a 20 or more amps fuse and work on that
Hi man, really thanks a lot for the tutorial but I'm wondering, how did u get the "half" fuse? Did u buy it or did u break it? (If broken, how much ampere was it and does is have to be broken a special/specific way)? Hope you can help me out :)
the half fuse is only required to make sure the wire doesn't fall out
just cut any fuse in half
or use a burnt out fuse
@@jmohammed4936 thanks alot! You really helped me out :)
Great !!!!!!!!!
What do you mean by half fuse? You mentioned @ 3:43 in the video? And how do i get one of these half fuse? Thanks in advance
cut the fuse in half
cut thr fuse in half or use a burned out fuse
@@jmohammed4936 got it. Thank you very much brotha!!!
@Finau Mataafa welcome, let me know if u need more help and I highly recommend it. it is big relief
Tislam Ya Warid
soooooo smart
Thank you! What gage wire would you recommend?
I'm not really expert on that. I used what I had.
A wire thats rated for at least 20a. 4mm cable which is (i think) roughly 8 gague in yank terms. 8 gague can carry 24a
@@1989Chrisc severely underrated comment, important information so you don't melt a wire
@J mohammed great video Mohammed, thanks for the information, it was extremely informative.
How to figure out which side of fuse is connected to battery and the other side to aux device....IF you do not have battery nearby for multimeter negative connection or wire positive connection. Eg my battery is in front and the fuse box in trunk.
use a long wire from the battery all the way to the trunk to do the test, thats the only way I can think of.
@@jmohammed4936 thanks for the reply. I have another issue now. :-)... Tried to push multimeter leads in and now the fuse won't stay in and fall out.
Btw I checked many slots using wire to make a complete connection. Ones marked unused or in use for audio or sound, nothing was able to light up lighter slot with or without ignition/engine on.
I am just hoping to solve the loose fuse slot issue without changing the whole fusebox. I tried putting in a metal piece, it worked but it was a ugly solution, trying to make it hold the fuse by itself somehow.
Is there a type of fuse jumper that would work for this?
this is a very simple hack
any fuse that u have there in ur fuse box that is not being used, will do
Its called a fuse tap. Search for bussman fuse tap.
Jeep gives u 2 fuse positions to change this…. Other manufacturers please do this.
Dumb question but what kind of wire do I use? Thanks,
I'm not an expert on that but any wire will do
I have three outlet ..should I make a wire for each one?
if they are not connected to each other already, then better to make 3 separate connections
you probably have to do 3, but it depends if they are all connected to 1 fuse or 3 separate fuses
If your cigarette lighter is killing your battery then you need a new battery
True, but this is not what this is about. It's the dashcams that stay on when the car is parked, and do NOT work when the car is started due to overheating, memory full, or they mess up with the phone app.
I'm actually looking at this to reverse engineer it on my car... I'm wiring it up so the lighter stays on at all times so my phone can charge when I leave it in the car and I'm not driving.
It’s not the cigarette lighter per se by itself it’s if you have a charger in there and forget to unplug it when you turn off the car. I can confirm it doesn’t take a whole lot of charging something with the car off to start causing problems.