I live in Minnesota and with the new cars we have snow trapped everywhere, it dripps out of everywere! a floor squeegee and a " Slush Buster " are needed tools!
@@PuddinsFabShop2come to Salem, Oregon and all of my Toyotas will run you lol 😂😂😂 Also if i got a HOODY OR SHIRT With THEOS DIRT I should be PAYING MORE FOR I5 LOL 😂😂😂😂
You need gutters all around the building. Maybe some in ground drainage in the concrete area around back. Make sure the grade all around is sloped away from the building as well.
Bingo right on , gutters, proper` flashing, and sealing joints, it's difficult joining a new pour to an old slab. Good grades away are so important for extreme weather. In the north, ice adds another hurdle. I always go more than less on grades for that reason.
Totally agree. Gutters would limit the amount of water that hits that corner of your concrete stab but there is definitely an issue with the stab/building seal.
There’s about 30 mins between us. That 11/3/24 tornado in SE OKC (89th & Sooner) was my neighborhood. F3 tornado was 2 streets down. Completely destroyed parts of the neighborhood. We were very fortunate and blessed to have only sustained minor roof, gutter and siding damage from wind and debris. So many others lost everything.
That’s cool you can get 10ft sheets of OSB all of the lumber yards like that near shut down or it’s special order. I have to say I think I’d of left a good bit of that open of until you get your water leak fixed so you can see if and where the water is coming in.
Jacob, I watch because you one of the real people here. It doesn't matter of you fab"n or talking or dancing or shooting from the hip. You're Real! God Bless you and your family.
Hey puddin. Bob Vila here again. Nice work with your carpentry. When you reinstalled the door trim and noticed that the contractor had left a space and you put the piece flush to the edge: The contractor did that properly. That space is a ‘reveal’ it serves 2 purposes 1 it looks better by giving the panel more depth or dimension and 2 since wood moves with temperature and humidity it is impossible to make the trim stay flush with the wall over time. By leaving a reveal you allow it to move both ways without being too noticeable. You did fine tho only Tom silva and I would point it out when we come over.
Keeping it real and showing all the struggles is part of what makes your channels great. You're only one man, that kind of limits what you can get done. Don't stretch yourself too far and always take care of your body. I've learned that lesson the hard way.
I'd say just build an overhang extension between both buildings and problem solved. Kick it out about 15 feet and you got another place to park cars to keep out of the weather.
There should have been a sealant between the wall and concrete. Under that door definitely. But you must have rain gutters and drains on that concrete pad. The concrete should slope away from your building enough to prevent pooling. Even gutters into a drain instead of out on the concrete
😂 a leak is how it starts, it’s how my bathroom got remodeled when all I needed to do was change the mix-it valve. Watching you tear into the walls I was like ahh yeah, I remember that day 😂😂😂 at least you found it quick
Hey Jacob... Next time it's raining that hard, put some food coloring on the concrete just outside the wall where it's coming in under the door to see if it's coming from under the wall.
Can't wait to watch...I went to a treatment center to get sober and was hoping u wouldn't stop making videos while I was gone...I haven't watched since about april(the start to the height of my alcoholism...was still pretty bad before then), I've watched every single one before then...I got some serious catching up to do. Thanks for the content puddin, love ya bud
A lot of addiction habits come from boredom in my opinion. You have to keep your brain stimulated constantly. So its good to replace that bottle with something else more positive, a hobby or whatever. Even binge watching videos. Hope it works out well for ya.
Well, praying that it doesn’t pop up elsewhere! Time to get the flex seal on the outside where the metal meets concrete. Seal that big expansion joint in front of the roll up and all other cracks in that area, then fix it permanently in the spring. God’s blessings on you!😊
You should look into sealing that expansion joint and where different slabs butt each other on the outside. When it rains or snows and water gets down in cracks in winter and we get a hard freeze it starts cracking the cement over time. BOOMER SOONER
Puddin, at the shop I used to work at we had a leak after they resurfaced the parking lot and the driveway. After months of dealing with it we found out that one of the contractors trucks had clipped the corner of the building. We were maybe 3/16ths off of the foundation. Which normally wouldn't be an issue, but the sill got cracked. They tried digging out the area, and coating it with rubberized sealer, using some weird vinyl rubber stuff and 4 or 5 other methods to stop the leak. What they finally did was to call a foundation mudjacking company that also waterproofed foundations and basements. They injected something into the area which stopped the leak.
I have been watching you for a long time. I love ur fabbing and energy. No apologies for the video. As I'm a disabled carpenter, I enjoyed watching you chase down that leak. Lol. ✌️ keep being you. As a fellow veteran, it was a pleasure serving with ya ✌️
Thanks for being real. You take whatever is thrown at you and don't lose it . When I was your age I would not have handled many of your situations well. Love your videos.
By the time you pay for all that it's much cheaper to do what he did and record it. Way cheaper to replace some foam and boards than it is for a plumber
@peter-pg5yc omg just a flir thermometer will trace the leak and any decent contractor should have atleast a flir u can get em 4 100buks hes done way more in damage!!!
This video helps other people find leaks, and such with the struggles you are going through ! Sorry about your troubles but I know you will push through!
Man, that's never fun! But at least you're not battling a tornado , Y'ALL ARE SAFE! Thank God!!!! It's still a good time to watch how you handled the flood situation like a BOSS!!!! 👍 Thanks for letting us come along for the adventure! Appreciate ya! 🇺🇸
Seems like there needs to be a relief cut into that expansion joint to drain it back out the driveway. Before the new part was built that water could just flow out the end but now it’s dammed up.
Built a gameroom underground, had 24 x 60. 8 ft tall, 9 inches thick! One week later it rained. Wall cracked. Water came shooting in!! Been dealing with with water leaking for 20 years. 🥴🥴🥴🥴 🇺🇸🇺🇸24 year Air Force Vet. Great video. Make me feel better!🇺🇸🇺🇸🇺🇸🇺🇸
The exterior wall is missing a Z-flashing that should go up the small concrete wall, over the top and up behind the sheet metal side wall panel. Right now it looks like its dripping on top of the concrete ledge under the side wall panel and on top of the concrete over to the inside. There should also be a foam sill sealer between the top of the concrete and bottom of the exterior frame wall sill plate, it seems like it is not there. that would limit the travel of the water. Good Luck
Puddin water is pushing up from the seams . You might check it and see if that's it . Man you might have to put a french drain in either inside or outside to trap that water . I work on this stuff for 30 years . The nice part about is you have plenty of slope away from the building . This is not far fetch it can and will work .👍
Well, dang it...the shop flooding is a bad thing, but glad y'all found the problem and can get it fixed. Thanks much for the second channel action Puddin!
Puddin you got 3 halfs of roofs of water running off there. Gutters mite help. Here's a little math I looked up. Roof area Sq ft x rain fall inches x 0.623 gallons = valume of water gallons coming off your roof in that area. I always thought it would be cool to put a roof over that hole area for more dry storage. Hope this help with knowing just how much water gets in that area. Good luck with it
Get some plastic pallets to put your merch boxes on. Cheap permanent insurance against most water issues. Concrete is porous. Even if you get the rain drainage issue fixed 100%, you could still get issues from groundwater
Looks like you got a good builder there trying to make it right. I had a building put up last year. I’m still fighting leaks in the roof. Only comes in when it rains a certain amount and the wind blows just right. The builder (Amish) came out once and blamed it on condensation and never returned. I had another guy come out and he found multiple loose screws and some where they missed the perlin underneath. That fixed most of them but still get a leak occasionally.
Hey fella Just a quick thought If you think its coming around floor level, have you thought to do a die test ?? A few drops where you think it might be coming in ... that way you can ether confirm or discard Iust an idear
Put up an over hang, extend a roof like you have on the other side of your shop. Put up a roof all around the shop where you can’t get wet, seal it and forget it, no more water down the walls. Angle your floors some how outside, guiding the water away from the building. It cost you, in the long run it be worth it 😎🤙🏽 …. Just a suggestion.
That's definitely because the concrete or grade outside is sloped toward your building rather than away from it. It comes under the threshold of the door because the concrete curb wouldnt have been poured there for the door. In fact they ended the curb on the wall where you found it to start getting wet. Gutters and downspouts directing the water away from the building would also help. Sika makes good concrete sealers for where its running through the expansion joint.
I need some drainage like drains that you put right from your garage when you pull your car in you can use drainage perforated pipe will fix all that move the water away from your building😊
Add an awning off the front of the OG shop between the two big shops. It will prevent water in that corner and provide more covered parking for the projects
Sometimes drastic measures have to be taken. Especially when chasing a leak. Glad you found it pray you find your missing merchandise. Looks like Theo wants his own hoodie.
The outside "grade" needs to flow away from the building and you need over hangs on your building or you will never get rid of water in your building. When my Dad built the house that I grew up in in the 1950's he had 3' overhangs to keep the water away from the house. I noticed in a previous video that you had water running across in front of your new addition and towards the drainage ditch along side your building (if you were standing looking out the garage door, the water was coming up on the cement slab in front of the garage door and flowing from left to right.) You can't have water flowing towards your building, you need to have a ditch or something to divert the water away from your building. Oklahoma, as you know, is in an area where storms can bring an enormous amount of water in a short amount of time. If I were you I would get an engineer to look at your situation and come up with a plan. Good Luck and God Bless.
I bet it takes a bit for that channel to fill up & overflow. The reason the garden hose worked for you was because it was already pretty full from the rain. It may take a hose a few minutes to fill that channel or something. So they just may not have hosed it long enough to fill that channel.
You went about finding the leak the same way I would of done it & Theo is smart plus he keeping from tracking in the mud & saving the wife from getting mad at you both ! $100.00 to fix it vs. the loss from shirts & hoodies you could not sale is worth the time too !
Did you install caulking under the sill plate further why did you concrete up to the siding you should remove the concrete and have a 1-2 inch drop to a French drain.
Best to figure it out now then have mold later. Looks like you can fill that expansion joint. Maybe put in some gutters to help Olivia the the constant flow and seal that side a little better. Looks like you have a couple good contractors that will fix it real quick.
Take the nozzle off the foam can and rinse it good with carb cleaner spray, blast with a little air... It'll be fine. I do it all the time, works great.
Glad you got a plan to fix the leak. Life certainly always finds a way to change our plans. Hot damn that man van sure looks good with that new glass. 💪
as far as your grey paint...go to your paint store and ask them for a thicker nap roller. "sheep's wool" is what we used on concrete walls. Gets into all the voids.
Does it have any holes on the roof where they drove the screw too far or nail into the sheet of metal for the roof or on the side of the building where it's leaking because when it comes to that sheet metal that you use on a building is very easy to tear or drill through
Good call to rip out the wall and truly find the leak. You definitely do not need the walls filling up with mold as a result of not finding the leaks. Hope things stay dry for you now!
That’s why I said have a roof over in the middle because I knew the rains was coming in there is more space to park your vehicle in there away from the rain or if you get delivery for the clothes the cups it be more dry🤪🤪
if you don't take care of those leaks and seeps - you'll have major structure damage in a few years. ya done good puddin! theo done good too - love me some theo!
If you purchase a 24" floor squeegee you have a 75% chance of it not leaking again.
I like the odds!!
😂😂
I live in Minnesota and with the new cars we have snow trapped everywhere, it dripps out of everywere! a floor squeegee and a " Slush Buster " are needed tools!
@@PuddinsFabShop2come to Salem, Oregon and all of my Toyotas will run you lol 😂😂😂 Also if i got a HOODY OR SHIRT With THEOS DIRT I should be PAYING MORE FOR I5 LOL 😂😂😂😂
@@PAVEMENTMOD you would have a 75%chance of not screwing up either
YOU GOT 2 GREAT CONTRACTORS! TO COME OUT ON INSTANT NOTICE, SHOWS THEY ACTUALLY CARE. VERY RARE IN THAT FIELD.
I don't know about everyone else, but for me it's more like hanging out with a buddy and having some good laughs. I'll watch whatever lol.
You need gutters all around the building. Maybe some in ground drainage in the concrete area around back. Make sure the grade all around is sloped away from the building as well.
Bingo right on , gutters, proper` flashing, and sealing joints, it's difficult joining a new pour to an old slab. Good grades away are so important for extreme weather. In the north, ice adds another hurdle. I always go more than less on grades for that reason.
Listen to this because it is exactly the response you should get from a contractor.
@@ecoalexas a guy from Wisconsin I say 👍
Totally agree. Gutters would limit the amount of water that hits that corner of your concrete stab but there is definitely an issue with the stab/building seal.
Get mortske back. He will figure it out. You have water seeping in from underground.
It's no surprise Theo is not a fan of the rain. He definitely spent some time trying to hide from it. Bless you and your family for taking him in.
There’s about 30 mins between us. That 11/3/24 tornado in SE OKC (89th & Sooner) was my neighborhood. F3 tornado was 2 streets down. Completely destroyed parts of the neighborhood. We were very fortunate and blessed to have only sustained minor roof, gutter and siding damage from wind and debris. So many others lost everything.
Hey MA, Puddins tearing up that shop that he just built
😂
😂
That’s cool you can get 10ft sheets of OSB all of the lumber yards like that near shut down or it’s special order. I have to say I think I’d of left a good bit of that open of until you get your water leak fixed so you can see if and where the water is coming in.
What the hell is he doing?
Jacob, I watch because you one of the real people here. It doesn't matter of you fab"n or talking or dancing or shooting from the hip. You're Real! God Bless you and your family.
Puddin, don’t knock you second channel videos, they are awesome!
I actually enjoy them more.
Hey puddin. Bob Vila here again. Nice work with your carpentry.
When you reinstalled the door trim and noticed that the contractor had left a space and you put the piece flush to the edge:
The contractor did that properly. That space is a ‘reveal’ it serves 2 purposes 1 it looks better by giving the panel more depth or dimension and 2 since wood moves with temperature and humidity it is impossible to make the trim stay flush with the wall over time. By leaving a reveal you allow it to move both ways without being too noticeable.
You did fine tho only Tom silva and I would point it out when we come over.
Keeping it real and showing all the struggles is part of what makes your channels great. You're only one man, that kind of limits what you can get done. Don't stretch yourself too far and always take care of your body. I've learned that lesson the hard way.
I started 3 one man businesses. (I don't work well with people). All 3 failed.
I'd say just build an overhang extension between both buildings and problem solved. Kick it out about 15 feet and you got another place to park cars to keep out of the weather.
That's been suggested a million times before!!!!!!
Hey Ma! Puddins got water in his crack 😂
😂
There should have been a sealant between the wall and concrete. Under that door definitely. But you must have rain gutters and drains on that concrete pad. The concrete should slope away from your building enough to prevent pooling. Even gutters into a drain instead of out on the concrete
😂 a leak is how it starts, it’s how my bathroom got remodeled when all I needed to do was change the mix-it valve. Watching you tear into the walls I was like ahh yeah, I remember that day 😂😂😂 at least you found it quick
We love you Puddin. Keep cleaning up that shop. We will watch. You are the best!!!!
Hey Jacob... Next time it's raining that hard, put some food coloring on the concrete just outside the wall where it's coming in under the door to see if it's coming from under the wall.
I was thinking that also
Can't wait to watch...I went to a treatment center to get sober and was hoping u wouldn't stop making videos while I was gone...I haven't watched since about april(the start to the height of my alcoholism...was still pretty bad before then), I've watched every single one before then...I got some serious catching up to do. Thanks for the content puddin, love ya bud
Best wishes to you on your recovery. It's a tough road but you got this buddy!
@surfer5352 thanks man 😄
A lot of addiction habits come from boredom in my opinion. You have to keep your brain stimulated constantly. So its good to replace that bottle with something else more positive, a hobby or whatever. Even binge watching videos. Hope it works out well for ya.
Well, praying that it doesn’t pop up elsewhere! Time to get the flex seal on the outside where the metal meets concrete. Seal that big expansion joint in front of the roll up and all other cracks in that area, then fix it permanently in the spring. God’s blessings on you!😊
Puddin i see that Chevy S10 in the garage can't wait for the video keep up the good work
also a corvette out in front of the bay doors
You should look into sealing that expansion joint and where different slabs butt each other on the outside. When it rains or snows and water gets down in cracks in winter and we get a hard freeze it starts cracking the cement over time. BOOMER SOONER
Puddin, at the shop I used to work at we had a leak after they resurfaced the parking lot and the driveway. After months of dealing with it we found out that one of the contractors trucks had clipped the corner of the building. We were maybe 3/16ths off of the foundation. Which normally wouldn't be an issue, but the sill got cracked. They tried digging out the area, and coating it with rubberized sealer, using some weird vinyl rubber stuff and 4 or 5 other methods to stop the leak. What they finally did was to call a foundation mudjacking company that also waterproofed foundations and basements. They injected something into the area which stopped the leak.
Impressed to see two different contractors to show up on the day you called! You have quality folks supporting you.
I appreciate what You do Sir, Thank You for Your Service to Our Country
❤❤❤❤Theo ❤❤❤❤ You make daddy’s videos even better you handsome boy ❤
I have been watching you for a long time.
I love ur fabbing and energy.
No apologies for the video. As I'm a disabled carpenter, I enjoyed watching you chase down that leak. Lol.
✌️ keep being you.
As a fellow veteran, it was a pleasure serving with ya ✌️
Thanks for being real. You take whatever is thrown at you and don't lose it . When I was your age I would not have handled many of your situations well. Love your videos.
A moisture meter eliminates the need to tear stuff apart. Same thing with a Flir cam. Just FYI
Tight and right.
Just wrote the same😂
It only tells where its wet not where its coming in. water is smart..
By the time you pay for all that it's much cheaper to do what he did and record it. Way cheaper to replace some foam and boards than it is for a plumber
@peter-pg5yc omg just a flir thermometer will trace the leak and any decent contractor should have atleast a flir u can get em 4 100buks hes done way more in damage!!!
I'm thinking it's coming from beneath the concrete.. you really need exterior drains or footer tile
I think that is exactly what is happening. Drill a hole into the conrete and see if water comes through!
I totally agree it’s coming underneath.
I agree myself. Up here in pa we call them French drains. I think you might need them. I bet it would stop.
Did any of ya actually watch thr video? He figured it out .
@ yes but we commented before he found as he asked.
This video helps other people find leaks, and such with the struggles you are going through ! Sorry about your troubles but I know you will push through!
I'm glad yall figured out the problem!
Keep up the 2nd channel Shenanigans 👍always good seeing Theo living his best life ❤
Dude you’re second channel is the best, love it
Thanks for the awesome content
Man, that's never fun! But at least you're not battling a tornado , Y'ALL ARE SAFE! Thank God!!!! It's still a good time to watch how you handled the flood situation like a BOSS!!!! 👍 Thanks for letting us come along for the adventure! Appreciate ya! 🇺🇸
Seems like there needs to be a relief cut into that expansion joint to drain it back out the driveway. Before the new part was built that water could just flow out the end but now it’s dammed up.
Built a gameroom underground, had 24 x 60. 8 ft tall, 9 inches thick! One week later it rained. Wall cracked. Water came shooting in!! Been dealing with with water leaking for 20 years. 🥴🥴🥴🥴 🇺🇸🇺🇸24 year Air Force Vet. Great video. Make me feel better!🇺🇸🇺🇸🇺🇸🇺🇸
The exterior wall is missing a Z-flashing that should go up the small concrete wall, over the top and up behind the sheet metal side wall panel. Right now it looks like its dripping on top of the concrete ledge under the side wall panel and on top of the concrete over to the inside. There should also be a foam sill sealer between the top of the concrete and bottom of the exterior frame wall sill plate, it seems like it is not there. that would limit the travel of the water. Good Luck
PFS!! Pudfin' Flood Stabilizer!! 👍
You need to put a water gutter up over the doorway. And part of the garage to keep the water from coming in
Great job Puddin Your two builders Good that they showed up to find the leak Theo is a good Dog
I'm glad you put the window in the van . Thank-you for repairing the Van.
Puddin' we love you. Life beats us up. The fact that you ain't afraid to record and share your reality of life is really why we watch.
Puddin water is pushing up from the seams . You might check it and see if that's it . Man you might have to put a french drain in either inside or outside to trap that water . I work on this stuff for 30 years . The nice part about is you have plenty of slope away from the building . This is not far fetch it can and will work .👍
Well, dang it...the shop flooding is a bad thing, but glad y'all found the problem and can get it fixed. Thanks much for the second channel action Puddin!
Puddin you got 3 halfs of roofs of water running off there. Gutters mite help. Here's a little math I looked up. Roof area Sq ft x rain fall inches x 0.623 gallons = valume of water gallons coming off your roof in that area. I always thought it would be cool to put a roof over that hole area for more dry storage. Hope this help with knowing just how much water gets in that area. Good luck with it
Get some plastic pallets to put your merch boxes on. Cheap permanent insurance against most water issues. Concrete is porous. Even if you get the rain drainage issue fixed 100%, you could still get issues from groundwater
Man that sucks. You handled it very well. As you probably know if you can fix your problem with money it’s not a problem. 🙏
Might be worth it to run a few drain channels toward that creek. Lots of people screw around but there is no replacement for -Problem Solved!!
Theo in the box was the best! I would definitely be okay with couple of hairs on my sweatshirt.
I think Theo dust should be a request at checkout.
@@MichaelH-u8s Just like adding sprinkles to an ice cream
Make a shirt or hoodie with Theo’s paw print
@@bryanwelch2701 a PFS logo with a ghosted paw print in it.
Looks like you got a good builder there trying to make it right. I had a building put up last year. I’m still fighting leaks in the roof. Only comes in when it rains a certain amount and the wind blows just right. The builder (Amish) came out once and blamed it on condensation and never returned. I had another guy come out and he found multiple loose screws and some where they missed the perlin underneath. That fixed most of them but still get a leak occasionally.
Hey fella
Just a quick thought
If you think its coming around floor level, have you thought to do a die test ??
A few drops where you think it might be coming in ... that way you can ether confirm or discard
Iust an idear
Put up an over hang, extend a roof like you have on the other side of your shop.
Put up a roof all around the shop where you can’t get wet, seal it and forget it, no more water down the walls.
Angle your floors some how outside, guiding the water away from the building.
It cost you, in the long run it be worth it 😎🤙🏽 …. Just a suggestion.
Man's gotta do what he's gotta do. God love ya brother
That's definitely because the concrete or grade outside is sloped toward your building rather than away from it. It comes under the threshold of the door because the concrete curb wouldnt have been poured there for the door. In fact they ended the curb on the wall where you found it to start getting wet. Gutters and downspouts directing the water away from the building would also help.
Sika makes good concrete sealers for where its running through the expansion joint.
Hot Dammm it’s Corvette time!!!!!
I need some drainage like drains that you put right from your garage when you pull your car in you can use drainage perforated pipe will fix all that move the water away from your building😊
Add an awning off the front of the OG shop between the two big shops. It will prevent water in that corner and provide more covered parking for the projects
Sometimes drastic measures have to be taken. Especially when chasing a leak. Glad you found it pray you find your missing merchandise. Looks like Theo wants his own hoodie.
I spy something that starts with a letter C. Thanks for another great 2nd channel video Puddin
The outside "grade" needs to flow away from the building and you need over hangs on your building or you will never get rid of water in your building. When my Dad built the house that I grew up in in the 1950's he had 3' overhangs to keep the water away from the house. I noticed in a previous video that you had water running across in front of your new addition and towards the drainage ditch along side your building (if you were standing looking out the garage door, the water was coming up on the cement slab in front of the garage door and flowing from left to right.) You can't have water flowing towards your building, you need to have a ditch or something to divert the water away from your building. Oklahoma, as you know, is in an area where storms can bring an enormous amount of water in a short amount of time. If I were you I would get an engineer to look at your situation and come up with a plan. Good Luck and God Bless.
I bet it takes a bit for that channel to fill up & overflow. The reason the garden hose worked for you was because it was already pretty full from the rain. It may take a hose a few minutes to fill that channel or something. So they just may not have hosed it long enough to fill that channel.
20:03❤ build yourself an awning and then put gutters up there so it doesn't even get into the wall or that crack
Glad we could help, lol. Keep the faith brother.
You went about finding the leak the same way I would of done it & Theo is smart plus he keeping from tracking in the mud & saving the wife from getting mad at you both ! $100.00 to fix it vs. the loss from shirts & hoodies you could not sale is worth the time too !
Did they install a gasket between the framing and the concrete
Did you install caulking under the sill plate further why did you concrete up to the siding you should remove the concrete and have a 1-2 inch drop to a French drain.
This is where the saying "Mo money, Mo problems" Comes from . The more stuff you have the more stuff that can break, Glad you found the culprit
Is that a 1984 C4 Corvette? Yer giv'n me the vapors, oh my!
Cut in a strip drain or 2 and add in an awing to cover the frontage. Or add in a small nib wall to divert it
Best to figure it out now then have mold later. Looks like you can fill that expansion joint. Maybe put in some gutters to help Olivia the the constant flow and seal that side a little better. Looks like you have a couple good contractors that will fix it real quick.
Take the nozzle off the foam can and rinse it good with carb cleaner spray, blast with a little air... It'll be fine.
I do it all the time, works great.
Nice to see a video of a day in the life of PUDDIN.
Great video brother love you guys keep them coming 👍
There is probably a little gap were the base plate for the framing bolts to the slab. Or the roof seal is knot sealed.
Puddin's flooding service defo need gutters mate well done on window repair lol
Glad you got a plan to fix the leak. Life certainly always finds a way to change our plans. Hot damn that man van sure looks good with that new glass. 💪
Careful you'll catch the C-4 bug . Most underrated car built. Love em! Let's see some !
Crazy, for cutting into the wall?? You were troubleshooting. Job well done.
Pro Paint Tip.....Use a 1/2 inch to 3/4 inch nap roller for o.s.b. and t-111 👍
as far as your grey paint...go to your paint store and ask them for a thicker nap roller. "sheep's wool" is what we used on concrete walls. Gets into all the voids.
Does it have any holes on the roof where they drove the screw too far or nail into the sheet of metal for the roof or on the side of the building where it's leaking because when it comes to that sheet metal that you use on a building is very easy to tear or drill through
Probably a good job to drill small holes and use a borascope right instead of tearing up the wall
On a positive note, man, that Stout is looking G U D!
Should make a carport between the two shops,
Can’t wait to see what is up with the S-10 in the garage as seen at 23:52
Sucks that you had to tear up your wall, but glad you figured it out... Worth it to save future headaches!!
Hey Puddin 👋, thanks for sharing. It was just cool to see all the fun .
Hey Ma pudding, his back here getting himself some trim!
I grew up hearing "Life is what happens when you make plans." I have come to find out it's painfully true.
When you were down by the creek, in the background of one of your shots, it looked like the water knocked through what looked to be a hill.
Good call to rip out the wall and truly find the leak. You definitely do not need the walls filling up with mold as a result of not finding the leaks. Hope things stay dry for you now!
Dude said it already, but Theo in the hoody box was priceless
No wonder the hoodies had sold out so quick. Hopefully you restock the zippered ones later.
That’s why I said have a roof over in the middle because I knew the rains was coming in there is more space to park your vehicle in there away from the rain or if you get delivery for the clothes the cups it be more dry🤪🤪
Those are now special, edition hoodies! They should bring top dollar!
I will buy theo hoodie. My dog loves him. Watches for him every episode
Ah brother we ain't worried about a little Theo dirt at all its just fine!!!😊
if you don't take care of those leaks and seeps - you'll have major structure damage in a few years. ya done good puddin!
theo done good too - love me some theo!
Your sidekick is a superstar!!!