4EFE 16 value engine timing method camshafts Timing position by RajaAuto

4Efe 16 value engine timing method camshaft Timing by RajaAuto
camshaft marks
timing marks
The 4EFE engine is a 1.3-liter, 16-valve, four-cylinder engine used in some Toyota models. Here is a general method for setting the timing on this engine:
Remove the timing belt cover to access the timing belt and related components.
Rotate the crankshaft until the timing marks on the crankshaft pulley are aligned with the marks on the engine block. The timing marks may be indicated by a groove or notch on the pulley and a mark on the engine block.
Check the alignment of the camshaft timing marks. There should be timing marks on both the camshaft sprocket and the cylinder head. These marks should be aligned with each other.
Loosen the timing belt tensioner and adjust the timing belt tension to the manufacturer's specifications.
Rotate the engine a few times to ensure the timing belt is properly seated and tensioned.
Reinstall the timing belt cover and any other components that were removed.
Start the engine and check the timing with a timing light. The timing should be adjusted to the manufacturer's specifications.
It's important to note that some vehicles may have specific procedures or requirements for setting the timing, so be sure to consult the owner's manual or a professional mechanic for guidance. Additionally, timing belt replacement is recommended at regular intervals to prevent potential engine damage due to a broken or stretched timing belt
#rajaauto web
www.rajaautomobiles.com

[@jhenrrimiranda9606]

Gracias por el video es la primera vez que estoy haciendo está reparación

[@morganchola1009]

Actions speaks louder than words , your demonstration is exceptional.

[@user-vq4qu5nw3h]

Nice

[@prenonthawong499]

Thank you very much

[@sulemanakbar7632]

Best video

[@yeri805]

Greetings, good video, my 4e engine does not synchronize in 4e in the brand of the cam tree, it synchronizes in 5e, what will be the explanation,

[@at190.corona2]

How to set up like this can be used with 4afe machine?

[@thanduxolothwani9840]

Hi just asking is the block a 2e i see thr

[@odochliverpool7089]

How about putting the Distributor, does it has it mark on the other end of the Cam Shaft?

[@RajaAuto]

No mark for distributor it's fitting correctly automatic
If you put wrong position it's not fit

[@odochliverpool7089]

@@RajaAuto Thank you Engineer

[@user-du8tl1ox1s]

End of camshaft there is something that block oil what do we call

[@antoniocatalanjr.8832]

How many teeth timing belt for toyota corolla 4AFE ?

[@RajaAuto]

117 teeth

[@odochliverpool7089]

Wow

[@babulahmed2112]

Your timing set up Right
Bro

[@elliasngceshe1162]

I have a problem with car the top have a noise but it's new or it can be the time or what any help and it doesn't have power

[@andrebain2831]

Have to adjust the tension on the exust cam

[@andrebain2831]

There is a tension in the exhausted cam look it up you have to set it

[@armanbriones8931]

Boss san shop mo

[@abelponcejara8637]

Falto trabar piñon de izquierda de admisión

[@keithkent6275]

No belt tensioner wheel spring?

[@RajaAuto]

No

[@RajaAuto]

Costumer not parches

[@davidpeffer7510]

I need for 4AK Toyota

[@silent_bob_]

Ma ei saa päris täpselt aru, mis loogika järgi sa need märgid tegid.

[@fawadkhann1]

Hi

[@RajaAuto]

G

[@fawadkhann1]

Please 4E engine 97 corolla ki bad noise par video banaye

[@benhall8946]

Why not cut the music off and speak that way we can hear what to do while you're doing it

[@user-sx7hm6dj9r]

6

[@oscarbuxo3431]

Dump the music...

[@benitopussolini544]

what the hell is than noise? is music?? what ever it is,it's NOT needed.just talk in your own language.

[@RajaAuto]

I trying