The 5pc kit actually comes with pwm fans with 4pin pwm plug and 3 pin argb plug and a 5 port hub. The 6pc kit is the one on the video and the newest version of the kit becomes with a 10 port hub that can also be pwm controlled. Both kits are the same price on Amazon US.
@@Splinterx182 I have the new 6 pack one, it came with the argb however it did not contain the 4pin pwm wire. do i need to buy that separate then? I have another build i am doing and if i could control the pwm then that would be great.
You were the first video when I looked up these specific fans. But because of your thumbnail I chose to judge a book by its cover. I watched two other videos on these fans and they were not informative whatsoever. I'm here on your video now and your video has been the most helpful.
thank you for the fast response time I love the look of these fans its the rings of them not all Christmassy colors. They just have a very different look.
You explained so well, how you can use it with SATA, as my MSI B450 Tomahawk MB doesn't have JRAINBOW, and the benefits of a controller. I only needed White LED and it would be cheaper to get those, but for a bit more you get the controller and addressable options, plus LED inside the fan blades. Thanks for your video, just ordered the six piece kit :D
They sure are pretty. Unfortunately pretty isn't quite enough. I despise proprietary connectors because it's incredibly limiting, and for lighting, I'm the guy who wants to control as many fans individually as possible. I have a Razer Chroma ARGB hub I would have used these on, but knowing that I can't is a deal-breaker for me. These would have been so much better if they had separate 4 pin power, and 3 pin argb cables on each fan instead of needing to use their hub. I saw quite a few complaints on Amazon about the hubs failing, and that sucks because if the hub fails you end up throwing functional fans in the garbage. I completely understand that they wanted to cut cost to compete with other brands, but making the connections/usage so dependent on the hub will turn people away, or create e-waste should the hub fail. Having to buy all new fans because they won't connect any other way, but still completely work would be a huge bummer. Thank you for the video, and solid explanation it really helped me a lot. I'll have to keep looking. So far my Deep Cool fans seem to be the best for their price range.
Great video. Appreciate the details put into a brand of budget fans. Just got the exact same pack, and it's only around USD42 here. Can't wait to use it on my pc.
The ARGB Frame on these look just like the Cooler Master MF120 Halo fans. The blades look a little different but I've used fans with similar looking blades and they work fine.
@@LastGameHunter The official Coolermaster 120 RGB Halo fans sell for just over 60 dollars a box of 3, so that would bring the price of 9 close to 200 dollars. I would say they are totally worth it, but then again I am a bit bias as they are my favorite fans. I've used them in two builds this year and they looks amazing.
Loved the review. I just installed the fans I find them quite loud.I even went into the by-ops to attempt making adjustments. They are the knock off fans of Cooler Master Master Fan MF120. These ones are a lot quieter.
After seeing a few different reviews and per my earlier question here i did buy the fans and they are now installed. For the lighting they do exactly what you have shown, However the fans on Max do not have the power to blow out a candle put right 1 1/4 front of them "I actually tested this lol" let alone blow across the room. So this may be my set and based on my set I would not purchase these for any cooling in the system at all. they are awesome for the price if you want some lighting which luckily is why i got them. Fortunately i have a couple really nice corsair 12v fans to cool the case so i could only use 4 of the six included fans. If i get up the motivation i may mod the other 2 so they just sit on the bottom of the case to make it look pretty.
I do agree after I put them in my build they are not moving as much as I wanted, I am going to try another higher flow set soon and see if it gets better
@@LastGameHunter I ended up placing one corsair fan as an intake on the bottom front "my case interior is black as most are so visually there is not much of a difference" and the other corsair as the main exhaust in top back same thing visually. other than that they look great. I just wanted to mention the airflow. I literally was not getting any real airflow with them out of the case and in the case practically no air flow "Again this could be my set, i will have to contact them on it". In fact unlike yours mine fans do not even turn off. they cycle through 3 low settings as if there really is no high setting at all. I even removed one of my vid cards "didn't mention that" to see if that helped airflow. to give a much better perspective on the airflow, my 3070 graphics fans have approx 400% more air flow set on low. from a lighting standpoint and price point they are worth the money absolutely for the lighting. that being said, I would spend the money again given how outrageously expensive rgb is right now "kids eat this crap up like candy" and as a parent/ grandparent my wallet and i am sure many others lol need a break. these are great for a budget build as long as they are aware the need to provide some real cooling at the front and rear of the case for good air flow.
@@LastGameHunter correct and yes you did. My statements only reflect the set that i received and not your review as I believe you gave a very good in depth assessment of the set you had received :). On another note, below another gentlemen states that the new 6 set "which is what i bought has a pwm control also. I however did not receive said wire with my set either. if they have that separate i do not know, however if they do then i will get that also as it would probably make a big difference in my opinion of the set i got. Anyhow, your vid was very informative, which is why i purchased them. So i hope you did not take any of my comments on the set i got as a negative on your review as i did not intend that.. keep up the great work. look forward to seeing more of your reviews on dyi... take care.
@@michaelmorrow9927 there is a better and PWM set Im going to use in my new big custom build, we will find out how well lol soon enough... www.amazon.ca/dp/B07N39Y8PS?ref=exp_thelastgamehunter_dp_vv_d out of stock at the moment....but I do use them in this video and so for as a open air case they are great.. check this video th-cam.com/video/AOQFb1i-8rI/w-d-xo.html
Great Video, think these are the same as the Gamemax Razor Extreme ARGB fans, only difference is Gamemax has a 3 fan pin connector as well as the 3 pin ARGB and you cant buy them in a pack.
Question: What screws we use to screw these to a radiator? Since these seem to be a lot wider than regular fans and radiator bring screws long enough for regular fans...
lets say we forget about the hub controller, can these fans plug into a Corsair commander and be controlled? Also when you say motherboard mode, can you control the colors in this mode - for example i have Asus "Armory crate controlled" will the software control the rbg if nothing else?
Thanks. Went with these for my Lian Li pc-o11dx 011 Dynamic and used this video to make sure I was installing them properly. So far, so good. They look great and my system is way cooler (because the damn case doesn't come with any fans).
REALLY nice job on this video. Best one on YT for this product. I bought a set of five ARGB for my Silencio 600 Cooler Master case because the two stock 120's aren't getting the cooling job done in my overclocked Ryzen 9 3900X and TWO overclocked GeForce 1660 SUPER's. The fans arrive tomorrow. Looking forward to the added ventilation for sure! So thanks 1 x 10^6 for this!
@@LastGameHunter They worked out GREAT! Two on top (exhaust), two in front (intake), and one in rear (exhaust). Lowered my twin GPU temps AND my Ryzen 3900X GPU temps by a full 6 degrees C! Benchmarks (Unigine Heaven) went through the roof with no thermal throttling. So thanks again for your video, which convinced me this product was a good value. MUCH appreciated.
I have the same fans on a msi z590 board and once they are synced with the board, I cannot unsync them. Pressing the green button 3+ seconds does not unsync them. I have to turn off the PC, unplug the argb cable, start the PC again
Quick question, will other brands of fans work with the fanhub? I have a pair of cooler master argb fans that came with my aio and am wondering if they could also plug into the fan hub so I could control both the moonlight fans and my cooler master fans from the hub at the same time so that they have the same colours / patterns
Hello, do you mind telling me what software you were using for the argb motherboard lighting? Looking at these fans and I'm having a hard time choosing because rgb software is so buggy.
just got mine today, i don’t have the 3 pin connection slot thing and my controller didn’t do anything when i clicked the button on it. i’ve tried pretty much everything, part of the rgb works but it only shows blue and green and that’s only a tiny bit of the fan, the other rgb lights on it don’t work. this probably sounds very confusing but i don’t really know how to describe it.
I wanted these fans but they are 3 pin 5v dang it, I need 4 pin 12v is there any way that I can use these with an adaptor of some kind. I have Asus Strix-A, Z490 board. In my case with AIO, I will need 10 fans. They are the best-looking fans I've seen I want them so bad but I don't want problems. Or am I SOL
You do not have to plug into your main board, I unhooked it as the remote has so many awesome affects. So the system is also stand alone no MB needed and still ARGB
Hey can you go into a little more depth about the modes. Because I bought the kit from your video(thank you btw ❤️) but im still confused as how to get a mode of my wanting
I think I damaged the controller when I wanted to connect the Corsair panel to it, my fans don't turn, does anyone know if replacing the hub will fix it?
good for chassis fan and for radiator... but for cpu heatsink cooler not recommend it bcause cant plug in pin tu cpu_fan pin...hahaha...i hope hub controller have long life..
hey is there a way to reset the fans? i switched like you in your video to the hub and back to argb with armoury crate and in every mode of armoury crate i get a white flash. when im in static using the argb software the white flickers. if i switch to the hub everything is working fine. it was also all fine till i made the switch for the first time ...
yes you can but get these instead.. better 3pk www.amazon.ca/dp/B07PV7QSGL?ref=exp_thelastgamehunter_dp_vv_d and 5pk www.amazon.ca/dp/B07N39Y8PS?ref=exp_thelastgamehunter_dp_vv_d
Hey! I buy this kit and I want to address one ARGB fan I have that is not from this kit. Is there a way I can connect it to the hub? I mean, is there a way to connect and ARGB and PWM connectors to one of the "special" connectors free in the hub?? Thanks for your videos!!
so far no but if you have an argb header on the MB you can do that or get a EZdiy converter amzn.to/41CWpwk I know its not the right item but it will add
Also, these are the same ones that are in this video right? www.amazon.ca/gp/product/B07X9YZ7YX/ref=ox_sc_act_title_1?smid=A2A4XZZKQVDB4S&psc=1 Just want to make sure I'm getting the right ones.
Hi sir., can I put these fans in a AIO? They seem prwtu nice for the price because I have a high end system in mind but the fans are just too way expensive.
@@LastGameHunter I have a quick question. I'm concerned about the airflow my case would be a corsair 5000D airflow and I plan to put 10 of these fans. I I'm planning to get those because the more recognized brands are way too expensive. So my question is... Will those fans are good for a 360 radiator? And other question that I have is that the have a good airflow for a ryzen 7 7800x3d and a rx 7900 xtx? Sorry for asking so mucho it's just that this would be my very first PC and I want to feel that everything is worth it.
@@kennY_72 I would use the fans for the case as the componants you want to use are not budget so on the rad use bequiet or corsair...bequiet prefered and the other cooling the fans are great
Hello. Thanks to you your video convinced me. I juste received mines. They look awesome. I got 6 and i am using the hub x and controller since my MB isnt compatible ( msi z370 gaming plus). Is there any watercooling or ventirad compatible with the hub ? Like i connect the fan on my MB so its controlled by it, and leds get connected to the hub so its synchronised with my 6 others fans ? I kinda dont want to change my motherboard right now. Subscribed ✌
there are other kits with PWM fan control and a button to control the lights like this one...www.amazon.ca/dp/B07N39Y8PS?ref=exp_thelastgamehunter_dp_vv_d
Can i use these with msi dragon center and choose a specific shade of a color like i can with my ram. Also can you change the fan speed with msi afterburner
@@LastGameHunter the fans work and light up and the remote lights up when I push the buttons but it doesn't actually do anything. Almost like the the remote isn't synced to the hub
I contacted the company after trying everything I could think of. I'm hoping they can help me with the fix or send me a new remote controller and/or hub.
They do a different fan that only lights the perimeter.... smile.amazon.co.uk/EZDIY-FAB-Addressable-Motherboard-Adjustable-Controller/dp/B07KJZPZH3/ref=sr_1_14?dchild=1&keywords=ezdiy+120mm&qid=1620339116&s=computers&sr=1-14
Were the rgb effect just like that because it was previously set on it? So in that sense, I could set it to a certain effect, then sync it with the mobo color?
Very nice review! So if my motherboard doesn't support rgb, I can just plug the station to the power and controll it with the remote? I can just leave the rgb cable or unplug it, or is it required to work?
So when the hub is plugged up with the sata and the argb on the motherboard, I only plug in the power cable of the fans in the hub and can control it with the Software? Did I get this right?
@@LastGameHunter I ordered this fans www.amazon.ca/EZDIY-FAB-Moonlight-Motherboard-Multiple-Modes-5Pack/dp/B088N7G8VM?pd_rd_w=YfoBn&pf_rd_p=0ba79034-c53d-434f-9818-5f9152f407a5&pf_rd_r=YB3R0HWA5HDBGQ6KZ1X6&pd_rd_r=90401db7-dc83-4422-94a0-8368ce16ad6e&pd_rd_wg=l0DiL&pd_rd_i=B088N7G8VM&psc=1&ref_=pd_bap_d_rp_6_i, the fans are working but the rgb are not
same green button for 3 sec. This has to be done on reboot before it loads into OS. My fans can't be controlled though no matter what I do the same speed.
Buy on Amazon EZDIY-FAB Moonlight 120mm RGB 5PKG : www.amazon.ca/dp/B07XBZN9PD/ref=as_sl_pc_qf_sp_asin_til?tag=lastgamehunte-20&linkCode=w00&linkId=cb8fc84205ad95b670a29788dbbfd19f&creativeASIN=B07XBZN9PD
Visit Ezdiy-Fab @ Amazon : www.amazon.ca/stores/EZDIY-FAB/page/58EFADD2-4C02-4E52-9592-CBA95954EF77?ref_=ast_bln
The 5pc kit actually comes with pwm fans with 4pin pwm plug and 3 pin argb plug and a 5 port hub. The 6pc kit is the one on the video and the newest version of the kit becomes with a 10 port hub that can also be pwm controlled. Both kits are the same price on Amazon US.
@@Splinterx182 I have the new 6 pack one, it came with the argb however it did not contain the 4pin pwm wire. do i need to buy that separate then? I have another build i am doing and if i could control the pwm then that would be great.
@@michaelmorrow9927 this kit is only controlled by remote for fan speed
You were the first video when I looked up these specific fans. But because of your thumbnail I chose to judge a book by its cover. I watched two other videos on these fans and they were not informative whatsoever. I'm here on your video now and your video has been the most helpful.
Thank you so much
even jay2cents approved this product
thank you for the fast response time I love the look of these fans its the rings of them not all Christmassy colors. They just have a very different look.
yes I love the look from them, my system looks pretty sweet!
VERY informative video, I've been looking for RGB fans and now I have found them! Thank you, you earned a new subscriber!
thank you so much...let me know how you like them
@@LastGameHunter Will do, they came but i'm waiting for my GPU to come and then i'll use them in my build!
VERY, VERY good video. I love the amount of detail you gave about the fans. I'm going to get them, no more questions. Thank you!
Thank you
@@LastGameHunter No problem!
You explained so well, how you can use it with SATA, as my MSI B450 Tomahawk MB doesn't have JRAINBOW, and the benefits of a controller. I only needed White LED and it would be cheaper to get those, but for a bit more you get the controller and addressable options, plus LED inside the fan blades. Thanks for your video, just ordered the six piece kit :D
I was actually trying to figure out how to get the mother board to control the rings on the set I bought. Thank you sir!
did you figure it out? MB control press and hold green button 3 sec
@@LastGameHunter Yes I did! Thank you again!
This is a really great review. Thank you. I appreciate the enthusiasm. And the break down.
thank you so much
Great review on these bad boys. You went above and beyond for this, thank you. Will definitely subscribe to this channel.
thank you so much
i would love a thermal comparison vs a known brand.
Great video. Had my eyes on these for a while and after watching your video went straight out and ordered them. Thanks man!
no problem my new build is almost done and those fans are not just moving great air but looking pretty sweet as well
They sure are pretty. Unfortunately pretty isn't quite enough. I despise proprietary connectors because it's incredibly limiting, and for lighting, I'm the guy who wants to control as many fans individually as possible. I have a Razer Chroma ARGB hub I would have used these on, but knowing that I can't is a deal-breaker for me.
These would have been so much better if they had separate 4 pin power, and 3 pin argb cables on each fan instead of needing to use their hub. I saw quite a few complaints on Amazon about the hubs failing, and that sucks because if the hub fails you end up throwing functional fans in the garbage. I completely understand that they wanted to cut cost to compete with other brands, but making the connections/usage so dependent on the hub will turn people away, or create e-waste should the hub fail. Having to buy all new fans because they won't connect any other way, but still completely work would be a huge bummer.
Thank you for the video, and solid explanation it really helped me a lot. I'll have to keep looking. So far my Deep Cool fans seem to be the best for their price range.
deep cool do make some decent fans for sure, and thank you for watching
Great video. Appreciate the details put into a brand of budget fans. Just got the exact same pack, and it's only around USD42 here. Can't wait to use it on my pc.
Nice thank you and enjoy
A good thorough review, thanks. Best I could find for this product.
Thank you so much
just sold me on these been hunting for a new case and fans all day
best review about that fan, thank sir,, u are good man..
thank you
The ARGB Frame on these look just like the Cooler Master MF120 Halo fans. The blades look a little different but I've used fans with similar looking blades and they work fine.
they are great fans ...but not on a rad
@@LastGameHunter The official Coolermaster 120 RGB Halo fans sell for just over 60 dollars a box of 3, so that would bring the price of 9 close to 200 dollars. I would say they are totally worth it, but then again I am a bit bias as they are my favorite fans. I've used them in two builds this year and they looks amazing.
@@johnlemus7921 I agree I love them as well
Thanks for a great video. Answered ALL off my questions.
thank you for watching
I'm starting to get hypnotized by those fans. With all the computer hardware your getting, you could accidentally design a bomb without realizing it.
LOL I hope not
Yeah thats very amazing Im gonna buy this fans for my first pc built and nice video! :)
Loved the review.
I just installed the fans I find them quite loud.I even went into the by-ops to attempt making adjustments.
They are the knock off fans of Cooler Master Master Fan MF120. These ones are a lot quieter.
thank you so much for watching
looking at the video title i thought , wow that's not a fan , that's a wind turbine at 120m ;o)
(I have these and love them)
So just plugging in the sata cable, i can use the remote already? No need to use the 3 pin?
yes
BUYED best fans ever hands down
After seeing a few different reviews and per my earlier question here i did buy the fans and they are now installed. For the lighting they do exactly what you have shown, However the fans on Max do not have the power to blow out a candle put right 1 1/4 front of them "I actually tested this lol" let alone blow across the room. So this may be my set and based on my set I would not purchase these for any cooling in the system at all. they are awesome for the price if you want some lighting which luckily is why i got them. Fortunately i have a couple really nice corsair 12v fans to cool the case so i could only use 4 of the six included fans. If i get up the motivation i may mod the other 2 so they just sit on the bottom of the case to make it look pretty.
I do agree after I put them in my build they are not moving as much as I wanted, I am going to try another higher flow set soon and see if it gets better
@@LastGameHunter I ended up placing one corsair fan as an intake on the bottom front "my case interior is black as most are so visually there is not much of a difference" and the other corsair as the main exhaust in top back same thing visually. other than that they look great. I just wanted to mention the airflow. I literally was not getting any real airflow with them out of the case and in the case practically no air flow "Again this could be my set, i will have to contact them on it". In fact unlike yours mine fans do not even turn off. they cycle through 3 low settings as if there really is no high setting at all. I even removed one of my vid cards "didn't mention that" to see if that helped airflow. to give a much better perspective on the airflow, my 3070 graphics fans have approx 400% more air flow set on low. from a lighting standpoint and price point they are worth the money absolutely for the lighting. that being said, I would spend the money again given how outrageously expensive rgb is right now "kids eat this crap up like candy" and as a parent/ grandparent my wallet and i am sure many others lol need a break. these are great for a budget build as long as they are aware the need to provide some real cooling at the front and rear of the case for good air flow.
@@michaelmorrow9927 I have made sure ppl knew not to use them in a water cooled build lol they would overheat
@@LastGameHunter correct and yes you did. My statements only reflect the set that i received and not your review as I believe you gave a very good in depth assessment of the set you had received :). On another note, below another gentlemen states that the new 6 set "which is what i bought has a pwm control also. I however did not receive said wire with my set either. if they have that separate i do not know, however if they do then i will get that also as it would probably make a big difference in my opinion of the set i got. Anyhow, your vid was very informative, which is why i purchased them. So i hope you did not take any of my comments on the set i got as a negative on your review as i did not intend that.. keep up the great work. look forward to seeing more of your reviews on dyi... take care.
@@michaelmorrow9927 there is a better and PWM set Im going to use in my new big custom build, we will find out how well lol soon enough... www.amazon.ca/dp/B07N39Y8PS?ref=exp_thelastgamehunter_dp_vv_d out of stock at the moment....but I do use them in this video and so for as a open air case they are great.. check this video th-cam.com/video/AOQFb1i-8rI/w-d-xo.html
Just got these can't wait to install. Well explained video subscribed!
thank you so much let me know how you like them
Great Video, think these are the same as the Gamemax Razor Extreme ARGB fans, only difference is Gamemax has a 3 fan pin connector as well as the 3 pin ARGB and you cant buy them in a pack.
the Gammaxx fans may move more air I really like them
Question: What screws we use to screw these to a radiator? Since these seem to be a lot wider than regular fans and radiator bring screws long enough for regular fans...
Rad screws that came with it worked fine
lets say we forget about the hub controller, can these fans plug into a Corsair commander and be controlled? Also when you say motherboard mode, can you control the colors in this mode - for example i have Asus "Armory crate controlled" will the software control the rbg if nothing else?
only with the hub
great video bro, i love this fans, today you steal recomend it? if not wich ones i mena like this budget friendly, kepp it op bro
They are great and still working fine
@@LastGameHunter ohhh great, thanks a lot i Will Buy them , Nice channel
@@TecnoMundoTutoriales Thank you for watching
You just sold me this
Thank you let me know what you think
Thanks. Went with these for my Lian Li pc-o11dx 011 Dynamic and used this video to make sure I was installing them properly. So far, so good. They look great and my system is way cooler (because the damn case doesn't come with any fans).
NICE and thank you for the response
Is it too loud woth9 fans?
Lian Li are assholes for not giving some fans in a case so expensive.
How did you get that lighting effect? it looks amazing
REALLY nice job on this video. Best one on YT for this product. I bought a set of five ARGB for my Silencio 600 Cooler Master case because the two stock 120's aren't getting the cooling job done in my overclocked Ryzen 9 3900X and TWO overclocked GeForce 1660 SUPER's. The fans arrive tomorrow. Looking forward to the added ventilation for sure! So thanks 1 x 10^6 for this!
let me know how you like them
@@LastGameHunter They worked out GREAT! Two on top (exhaust), two in front (intake), and one in rear (exhaust). Lowered my twin GPU temps AND my Ryzen 3900X GPU temps by a full 6 degrees C! Benchmarks (Unigine Heaven) went through the roof with no thermal throttling. So thanks again for your video, which convinced me this product was a good value. MUCH appreciated.
@@frankschannel2642 thank you so much
i just installed mine and it seems that the remote doesn't control my fan speed, how odd my MB doesn't have RGB idk if that makes a difference
No the remote if the kit is not PWM fans has 3 speed on remote
The question that bugs me the most: Will it remember MB mode or do you have to push the button everytime you boot the system?
it remembers the last mode no issues
Can you make it to where the fans are dark but just the ring is lit up?
I have the same fans on a msi z590 board and once they are synced with the board, I cannot unsync them. Pressing the green button 3+ seconds does not unsync them. I have to turn off the PC, unplug the argb cable, start the PC again
very odd, I do not use MSI anymore so I Can't test it.
great video! well done! keep it up!
thank you
Quick question, will other brands of fans work with the fanhub? I have a pair of cooler master argb fans that came with my aio and am wondering if they could also plug into the fan hub so I could control both the moonlight fans and my cooler master fans from the hub at the same time so that they have the same colours / patterns
only if they have the 5 or 6 pin connector that these have.
@@LastGameHunter thanks!
Hey, great review. I have a question, are these compatible with the b450 tomahawk max?
As long as you have the 3 pin addressable connector on the main board, if not the controller included works perfect.
The Last Game Hunter oh ok. Thanks. I only think that it has 4 pin connectors.
Hello, do you mind telling me what software you were using for the argb motherboard lighting? Looking at these fans and I'm having a hard time choosing because rgb software is so buggy.
I only use Gigabyte Aorus MB so fusion 2.0
just got mine today, i don’t have the 3 pin connection slot thing and my controller didn’t do anything when i clicked the button on it. i’ve tried pretty much everything, part of the rgb works but it only shows blue and green and that’s only a tiny bit of the fan, the other rgb lights on it don’t work. this probably sounds very confusing but i don’t really know how to describe it.
sorry only seeing your comment now... that is odd have you contacted them?
when i boot up my pc the color change to a base red, the mode that i selected is not remaining saved, how can i do ?
if you used the hookup on the mother board it may be the issue, only use the remote
Great video buddy… i am willing to buy these fans but not sure if it will stand the test of time…should i buy it ?
so far all mine are still going strong...I would say at least 5 or more years out of them
I wanted these fans but they are 3 pin 5v dang it, I need 4 pin 12v is there any way that I can use these with an adaptor of some kind. I have Asus Strix-A, Z490 board. In my case with AIO, I will need 10 fans. They are the best-looking fans I've seen I want them so bad but I don't want problems. Or am I SOL
You do not have to plug into your main board, I unhooked it as the remote has so many awesome affects. So the system is also stand alone no MB needed and still ARGB
Are these decent to use for a 240mm radiator with 3 fans on each side doing a push-pull?
push pull yes on the own no
Hey can you go into a little more depth about the modes. Because I bought the kit from your video(thank you btw ❤️) but im still confused as how to get a mode of my wanting
m+ AND m- FROM THE REMOTE AND IF PLUGGED INTO mb PRESS GREEN AT THE BOTTOM FOR 3 SEC AND MB CONTROLLED SRY CAPS
cant turn off the middle light? can it just lighting the side one only?
no sorry
I think I damaged the controller when I wanted to connect the Corsair panel to it, my fans don't turn, does anyone know if replacing the hub will fix it?
it should
hey i put the fans in sync mode and i dont know how to put them back
do you mean sync with MB? if so press and hold the bottom middle button
@@LastGameHunter this has to be done on reboot on some setups such as Asus Mobo.
@@DeeBatch good to know thank you
@@LastGameHunter NP I can't get fans speed to work though. Just one speed
7:04 that blue white lighning effect preset coming from aura sync software or from remote?
remote
@@LastGameHunter this fan use 6pin connector like aigo dr12 pro 3 in 1?
@@zerefdragneel5767 not sure if its the same
I have a Corsair Hydro H60 Series, would you recommend to use one this fans in place of the stock one or for any other watercooling?
I would not use these for water cooling, your fans are way better static pressure
@@LastGameHunter Thanks for the response.
So can you use and control the fans with just the remote and fan hub without having to connect it to the motherboard with the three pin?
yes the remote has better modes anyway its better
@@LastGameHunter ok thanks
how many fans can handle the hub?
10 port hub
Are they loud? Love the video BTW. Really helpful
no they are very nice sound wise was impressed
@@LastGameHunter thank you!
good for chassis fan and for radiator... but for cpu heatsink cooler not recommend it bcause cant plug in pin tu cpu_fan pin...hahaha...i hope hub controller have long life..
great review
hey is there a way to reset the fans? i switched like you in your video to the hub and back to argb with armoury crate and in every mode of armoury crate i get a white flash. when im in static using the argb software the white flickers. if i switch to the hub everything is working fine. it was also all fine till i made the switch for the first time ...
Weird Ill try to find out
Could you use only aio radiator as both push and pull and is the 3 pack on Amazon the same as there ones
Can they just work with sata as I don’t have argb on my motherboard
yes you can but get these instead.. better 3pk www.amazon.ca/dp/B07PV7QSGL?ref=exp_thelastgamehunter_dp_vv_d and 5pk www.amazon.ca/dp/B07N39Y8PS?ref=exp_thelastgamehunter_dp_vv_d
Hey! I buy this kit and I want to address one ARGB fan I have that is not from this kit. Is there a way I can connect it to the hub? I mean, is there a way to connect and ARGB and PWM connectors to one of the "special" connectors free in the hub?? Thanks for your videos!!
so far no but if you have an argb header on the MB you can do that or get a EZdiy converter amzn.to/41CWpwk I know its not the right item but it will add
Awesome video!
thank you
whats the software for these? if there is any. oh, and is it dependent on the motherboard im using (ASUS ROG STRIX GAMING II)
no software needed
hey i was watching these fans but it's in german do you know anything about them noiseblocker nb-eloop x b12-ps argb
All I can say is the German made gear i have used has been great but i do not not this company.
my fan hub came dead on arrival. i plugged the sata cable from my psu to the hub, switched it on and no response. any update on these?
contact them they will send you replacement asap, so sorry that happened
@@LastGameHunter just did! thank you
I'm having a nightmare getting these to sync with aura. It shows up as a LED strip in asus controller. Any ideas?
Any way to de-sync the argb (back to using the remote to control the colors) without plugging out the argb cable?
yes press and hold the green button at the bottom of the remote
Do these fans have a solid color mode? I want to do an all solid white setup and I don't want the color mode to be breathing/fading, etc.
Also, these are the same ones that are in this video right? www.amazon.ca/gp/product/B07X9YZ7YX/ref=ox_sc_act_title_1?smid=A2A4XZZKQVDB4S&psc=1
Just want to make sure I'm getting the right ones.
YES YOU CAN DO THAT
Awesome vid I’m buying these!
Thank you
Thx for the video! Mine are coming on friday :D Are they quiet btw?
yes very
@@LastGameHunter Thanks!
HOw do you determine which fans are doing intake or exhaust.. ty
all the fans can do both, when the blades are facing you thts pulling in and when the back is facing you its pulling out,...I hope that helps?
@@LastGameHunter Yeah I have finally realized just a minute ago lol. Thank you! I am currently building my first ever pc! Thank you thank you.
@@defiantjv2920 any other questions let me know
@@LastGameHunter Uhm, the ARGB SYNC cable links to the motherboard?
@@defiantjv2920 If you want it to, you really do not need it as the controller is better
Hi sir., can I put these fans in a AIO? They seem prwtu nice for the price because I have a high end system in mind but the fans are just too way expensive.
I have one wall system using them in push pull config 240mm rad and 4 x 120 and that works great
@@LastGameHunter I have a quick question. I'm concerned about the airflow my case would be a corsair 5000D airflow and I plan to put 10 of these fans. I I'm planning to get those because the more recognized brands are way too expensive. So my question is... Will those fans are good for a 360 radiator? And other question that I have is that the have a good airflow for a ryzen 7 7800x3d and a rx 7900 xtx? Sorry for asking so mucho it's just that this would be my very first PC and I want to feel that everything is worth it.
@@kennY_72 I would use the fans for the case as the componants you want to use are not budget so on the rad use bequiet or corsair...bequiet prefered and the other cooling the fans are great
@@LastGameHunter the AIO will be a deepcool lt720 do you thing it's good enough?
@@kennY_72 you will want a 360 aio for the cpu
how do i get out of motherbord mode ? i did hold the center botton but nothing happend
thats very odd
What is the fan air pressure of these fans?
I think the static air is jus under 1 I would only use in open air...not a Rad
@@LastGameHunter okay thank you, got any suggestions for good budget fans for a rad
does this fan controller have onboard memory?
yes remembers even if unplugged
Can you connect an LED strip to the controller unit? does it use 3 or 4 pin?
2 Strips, also from ezdiy
Hello. Thanks to you your video convinced me. I juste received mines. They look awesome. I got 6 and i am using the hub x and controller since my MB isnt compatible ( msi z370 gaming plus).
Is there any watercooling or ventirad compatible with the hub ? Like i connect the fan on my MB so its controlled by it, and leds get connected to the hub so its synchronised with my 6 others fans ?
I kinda dont want to change my motherboard right now.
Subscribed ✌
there are other kits with PWM fan control and a button to control the lights like this one...www.amazon.ca/dp/B07N39Y8PS?ref=exp_thelastgamehunter_dp_vv_d
can you buy on there own or have buy in the packs
I will look into it but I do not think so.
Can i use these with msi dragon center and choose a specific shade of a color like i can with my ram. Also can you change the fan speed with msi afterburner
Yes and no fan speed is controlled be remote only, try these ... www.amazon.ca/dp/B07N39Y8PS?ref=exp_thelastgamehunter_dp_vv_d
I got these for my build but my controller doesn't seem to be synced to the hub. Any ideas?
Not sure what you mean///are they working? or do you mean with the motherboard?
@@LastGameHunter the fans work and light up and the remote lights up when I push the buttons but it doesn't actually do anything. Almost like the the remote isn't synced to the hub
@@jaimeleo1157 Ok that is odd I will try to see if I can talk to them and see what to do.
@@LastGameHunter thank you so much. I'm going to try and mess with it more tonight when I get home.
I contacted the company after trying everything I could think of. I'm hoping they can help me with the fix or send me a new remote controller and/or hub.
Hi can you plug the 5v cable from the hub into other hub if you only have one 5 v argb on your motherboard
Great question, I have not tried this and it may be a bad thing to try. sorry I do not have the answer
Question: Hi, does fan speed remembers itself after restart the PC? Or do you have to slow it down everytime you boot up your PC?
it has its own memory it will keep settings
can I know the max RPM for these fan? can I control it from the motherboard or is it only can control by the remote?
I have forgotten the max rpm ill try to get that but only remote no MB control, you may want these : th-cam.com/video/zSNguKWNVvk/w-d-xo.html
You think I can use the Corsair hub that come with the case I bought with these fans?
I would say even if it fits do not, could cause damage as you never know what ones wiring can be much different.
Do you think they almost match the fans that comes with ek 360 aio color wise?
no AIO fans have better Static air flow, What I do in cases like this if I can is push pull
Can the RGB lights from the center be turned off so only the lights from the frame/perimeter are lit?
no but I am about to do a review on a set that is only the ring and the sides
They do a different fan that only lights the perimeter.... smile.amazon.co.uk/EZDIY-FAB-Addressable-Motherboard-Adjustable-Controller/dp/B07KJZPZH3/ref=sr_1_14?dchild=1&keywords=ezdiy+120mm&qid=1620339116&s=computers&sr=1-14
Were the rgb effect just like that because it was previously set on it? So in that sense, I could set it to a certain effect, then sync it with the mobo color?
no i picked the settings
Comparable woth msib450 gaming plus max?
compatible even with older as you do not have to hook it up to your MB but there is a ARGB 3 pin on the HUB for MB control
@@LastGameHunter thank you so much I’m buying today!
Very nice review! So if my motherboard doesn't support rgb, I can just plug the station to the power and controll it with the remote? I can just leave the rgb cable or unplug it, or is it required to work?
do not need the cable
@@LastGameHunter thanks alot!
@@Marki02 anytime
I have a Gigabye B450 Aorus M motherboard. Do you know if these fans will work with it?
these fans can work just from the built in controller so yes and they can plug into the board
So when the hub is plugged up with the sata and the argb on the motherboard, I only plug in the power cable of the fans in the hub and can control it with the Software? Did I get this right?
For remote control yes
@@LastGameHunter And what if i wanted to control it with the software?
Would I need an ARGB Splitter to plug in all the fans?
@@dominikwieser1014 no the hub will out to one 3 pin and you can control it from MB
I didnt get one thing. It is possible or not to control the speed from my motherboard? I have a Z370 Aorus Gaming 5.
Thank you!
speed is from the remote only
Theres a version of this with pwm control for 45€ for 5pack with a 5 fan hub
how can i control the lights thru my mobo's software? im using aorus pro wifi z390
you need to press and hold the middle bottom green button for 3 secs
Thank you!! Been trynna figure it out for like 5months 🤣
@@MFUNOXIII lol sry
Those look sweeeeeet!!
thanks bro
What if my motherboard doesn't have 3pins all of it are 4pins my motherboard is rog strix b550f gaming
Just use the supplied remote and no need to hook up to MB
@@LastGameHunter I ordered this fans www.amazon.ca/EZDIY-FAB-Moonlight-Motherboard-Multiple-Modes-5Pack/dp/B088N7G8VM?pd_rd_w=YfoBn&pf_rd_p=0ba79034-c53d-434f-9818-5f9152f407a5&pf_rd_r=YB3R0HWA5HDBGQ6KZ1X6&pd_rd_r=90401db7-dc83-4422-94a0-8368ce16ad6e&pd_rd_wg=l0DiL&pd_rd_i=B088N7G8VM&psc=1&ref_=pd_bap_d_rp_6_i, the fans are working but the rgb are not
What cheap motherboard will use these fans and support 3rd gen ryzen?
One nice cheaper MB would be the B450 Aorus M for 3000 series CPU
@@LastGameHunter Best recommendation! Thanks so much
can you disassemble the fans for spray paint?
great question! it would be hard to do as the fan is RGB and the Frame.
How these work with the Motherboardsync?
very good you just have to hit and hold a button on the remote
How do you turn off motherboard control!! Please help
press and hold the bottom middle button I think its green
same green button for 3 sec. This has to be done on reboot before it loads into OS. My fans can't be controlled though no matter what I do the same speed.
you can also just press the 'RGB' button on the controller for 3 seconds too....it toggles motherboard control on/off