I just put in a new rekluse, ran the bike with the stock rubber for about 5 hours. I started to get clutch noise. i was getting aluminum sprinkles in my oil change. So I took apart my clutch again. I was not able to find any movement with my hand like it says in the rekluse manual. I put the center hub back onto the splins and then i forced it back and forth.. thats when i was able to find that there was play inbetween the center hub and the outer hub. I am waiting for the new rubber in the mail... I also found the basket has play between the ring gear and the crank out put gear. I can see it move in your video . I wonder how much play there should be there??
I just put in a new rekluse, ran the bike with the stock rubber for about 5 hours. I started to get clutch noise. i was getting aluminum sprinkles in my oil change. So I took apart my clutch again. I was not able to find any movement with my hand like it says in the rekluse manual. I put the center hub back onto the splins and then i forced it back and forth.. thats when i was able to find that there was play inbetween the center hub and the outer hub. I am waiting for the new rubber in the mail... I also found the basket has play between the ring gear and the crank out put gear. I can see it move in your video . I wonder how much play there should be there??
Lovin' the David Bowie gloves. You should sell these. Thanks for the vid. Very helpful. Tossing these in my 501.
Try setting the dumper on the basket lead and then push it into the basket, much easier...
Will the recluse dumpers fit the OEM basket?
Yes, good tip👌🏽
They work equally well on any aftermarket or OE clutch set up.
Cool. How to know when to change ? Clicking ?
Will fitting a rekluse quiet clutch down? Got 18 tpi and clutch is loud even after changing rubbers
How many hours do you get out of the stock dampers?
What springs do you use?
12:30 I think you hot that wrong, number 3 is the least slippage not one lol
Came here to see which way the hub nut threads on. I got screwed.
Do you still use the 1 full turn plus 2 ticks on the slave adjuster as recommended by Rekluse, even with using slot 1 and not slot 2 as recommended?
Adjust per rekluse specs
It’s Rekluse not Rakluse “E”
That settles it then