FMS Model Offcial

🎉FMS FCX24 1:24 Power Wagon
👉FMS Model: www.fmshobby.com/products/1-2...
👉Fair RC (Shipping worldwide): bit.ly/3zYmiuM
👉Amazon: l.linklyhq.com/l/1KOe1
Introduction:
FCX24 is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon. Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.
The crawlersare generally equipped with front and rear straight axles to simulate the locked state of the real car differential to improve off-road passing ability. The FCX24 is equipped with a straight axle by default, but the planetary gear differential can also be replaced with high-viscosity silicone oil to simulate the driving effect of an LSD limited-slip differential. After installing the differential, the ultimate climbing ability will be reduced, but a smaller turning radius and a more stable high-speed driving quality can be obtained. Simply put, the straight axle is suitable for extreme climbing, and the limited-slip differential is suitable for high-speed off-road. The choice is yours.
The two-speed gearbox uses the CH3 of the remote control and is operated by a 9G steering gear. The low gear reduction ratio is 99, which is larger than that of similar products currently on the market. The torque output is strong, and easy for extreme climbing. The high gear reduction ratio is 24.75, and the speed is higher than that of all similar products currently on the market. You can experience the fun of high-speed breakthrough, small jump, and even heading up.
Stainless steel ball bearings are always the favorite of players, but in order to reduce the street price, most brands will choose bushings as a replacement for all or part of the bearings. However, considering that players need to completely disassemble the whole car to upgrade the bearings in future, which is slow and laborious, FCX24 chooses to pre-install the whole car with a total of 24 bearings, which does not need to be disassembled and re-upgraded, saving time and effort, and addresses the concern once for all.
As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. We put the reason and future development in this story to share with you.
2.4G 4-channel digital proportional remote control system, in addition to normal driving and steering control, the CH3 is used to control shifting, and the CH4 is reserved for players’ imagination expansion. It is also equipped with a lighting control module, and the headlights can be switched between high and low beams. In addition, interfaces for taillights and turn lights are reserved for players to modify.
Unlike previous FMS products, FCX24 focuses more on sports performance. A large number of upgraded and modified parts such as metal gears, shock absorbers, high-performance motors, radiators, and wheel hub counterweights will be launched simultaneously. Players from all over the world, look forward to you creating your own unique FCX24.
Features:
- Some features that other RC models lack.
● The first 1:24 scale model on the market includes a two-speed transmission.
● The Portal Axle improves off-road capability.
- A High-Performance Monster
● 24 Ball bearings full set allows the wheel to rotate smoothly and with minimal friction.
● Metal gears are used in the steering servo for rugged, dependable service in extreme conditions.
● Four link suspension aids in reducing steer and torque twists.
- High-quality body and designed for maximum enjoyment.
● Car Body Quick Separation
● More enjoyable with a elaborate lighting system
● Create your own Power Wagon with the original personalized stickers
Where to find us✨🎉
🌟FB: / fmsmodel
🌟IG: / fmsmodel2007
🌟TW: / fmsmodel
🌟TikTok: / fmsmodel

[@FranklinWistler]

Thx 4 this. Was waiting for such a car.

[@SqueakLP]

awesome

[@JohnTaylor-zl4tjr]

Nice one 👍

[@DArealCHAZZ]

It needs metal gears quick or is a dead project on arrival.. The portal gears strip wasn't even in a bine or anything.. That little pin the gear rest on to lock it in place Strip the gear... So it just spins, Plastics is too soft.. But other than that it looks great and the 2 speed is genius... Let's just get some metal gears going......

[@fmsmodelRC]

Check it, we will keep releasing some optional great parts.
www.fmsmodel.com/product/124-12401-portal-axle-metal-gear/1809/

[@IowaBudgetRCBashers]

These are awesome!! We’d love to showcase one on our channel.

[@fmsmodelRC]

Order one.😁😁
www.fmsmodel.com/product/124-power-wagon-fcx24-yellowbluered/1762/
Remember to join in the group and post on it, have a chance to win the free prizes.
facebook.com/groups/1441412106321748/

[@hellofromsoutheastalaskarc7517]

Hello from southeast alaska

[@fmsmodelRC]

Hello

[@tarantula-man]

metal gears please

[@fmsmodelRC]

Check it, we will keep releasing some optional great parts.
www.fairrc.com/products/1-24-power-wagon-portal-axle-metal-gear

[@rab..]

What do you plan to do about people already stripping the fragile plastic portal gears ??? FMS was so close to making a game changer here . Shame

[@William-McCueRC]

Bashed the shit out of mine with larger tires and haven't stripped anything yet.

[@fmsmodelRC]

Hi Rab, contact our cutomer service [e-mail], they will free send you the portal axle metal gear to express our apology.