How to Read PLC Wiring Diagram | PLC Wiring Tutorial for Beginners | PLC Panel Wiring Diagram

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 พ.ค. 2024
  • ✅ Join us here, get awesome perks, and support us, all at once:
    / upmation
    Read the full blog post at ▶ upmation.com/plc-wiring-diagram/
    How to Read PLC Schematics and Diagram
    In Part 1 of this video series, you’ve learned how to read and understand a wiring diagram of an industrial control panel and in this part, we’re going to continue with the PLC part of that same control panel to learn about some PLC wiring best practices.
    👉 To watch Part 1 head to ▶ upmation.com/wiring-diagrams/
    In this PLC circuit diagram example, we'll go through different pages of an actual PLC wiring diagram document.
    First of all, you'll see how we should power up a PLC CPU and its digital and analog cards.
    Second of all, you learn about the communication ports of the PLC and its remote IOs such as Profibus ports.
    Then we check to see which common devices are wired up to our digital input card and digital output card.
    We'll also check an analog output card of a Siemens S7 300 PLC and during this investigation, you'll see how a VFD is connected to a PLC in a wiring diagram.
    All in all, you will get to know the PLC control panel wiring diagram better than before and become more efficient in your industrial automation career.
    ===========================
    ✅ Please SUBSCRIBE to get notified about the new videos: bit.ly/32mlhu9
    ===========================
    SECTIONS of this video:
    0:00 What you'll learn in this PLC circuit diagram example
    0:37 Rules of Thumb in Wiring Diagrams
    1:12 Power connect of a Siemens PLC
    2:27 Profibus communication of a Siemens S7 300 PLC (MPI Port/DP Port)
    3:34 Siemens Analog Output card wiring diagram (2 and 4 wire connection)
    6:34 How PLC commands the VFD to adjust the motor speed
    7:24 Siemens Digital Input card wiring diagram
    8:37 Siemens Digital Output card wiring diagram
    9:12 Where we use a wiring diagram
    ===========================
    ▶ If you've missed our most recent videos, watch them here:
    What is a Directional Control Valve? (5/2 Solenoid Valve)
    upmation.com/directional-cont...
    NO vs NC: 5 Practical and Important Points about NO and NC contacts
    upmation.com/no-and-nc/
    DCS vs PLC: 5 Important Differences between PLC and DCS
    upmation.com/plc-vs-dcs/
    ===========================
    ▶ If you want to become a confident PLC programmer, don't miss this free "Siemens PLC Training" course (This course will be continued):
    Part 1: Up & Running with PLC Ladder Programming
    upmation.com/plc-hardware-con...
    Part 2: How to Write PLC Ladder Program?
    upmation.com/ladder-logic-plc...
    Part 3: How to Simulate the PLC Program?
    upmation.com/simulate-the-plc...
    Part 4: Motor Start and Stop Ladder Logic PLC Program
    upmation.com/plc-program/
    ===========================
    FOLLOW US on other Social Media
    👉 INSTAGRAM ▶ / upmationdotcom
    👉 TWITTER ▶ / upmation
    👉 FACEBOOK ▶ / upmation
    👉 LINKEDIN ▶ / upmation
    ===========================
    #plcwiring #Upmation #circuitdiagram

ความคิดเห็น • 343

  • @razerimperator231
    @razerimperator231 3 ปีที่แล้ว +28

    Hi my friend!!!I am very happy that this challenging year 2020 introduced me to your TH-cam channel:)Your information is invaluable. Thank you for introducing me to the world of Siemens! I wish you a happy new year!!!

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      Hi there! Thanks for your nice comment! We're also thankful for having such supportive and enthusiast fans! We hope we can continue our path in 2021 as well. Happy holidays! :)

    • @razerimperator231
      @razerimperator231 3 ปีที่แล้ว

      @@Upmation Hello, my friend!When will the new videos be released?You are very interesting to watch:)I'm even willing to sign up for a paid subscription to always stay with you! Thank you for your reply!!!

    • @Upmation
      @Upmation  3 ปีที่แล้ว +3

      @@razerimperator231 Hi there! It's very nice reading from you again. We're really lucky to have subscribers like you here! We'll promise to restart publishing videos maximum by 17th March. Thank you!

    • @GkMonk
      @GkMonk 3 ปีที่แล้ว +1

      hey, upmation I am not into automation but I love your presentation techniques, It'll be a great help if you tell us about the presentation software you used for this video.

  • @chiselcheswick5673
    @chiselcheswick5673 3 ปีที่แล้ว +8

    Brilliant... I worked as an electrical maintenance engineer after my apprenticeship and did plenty on Allen Bradley PLC 2 & Telemecanique. A lot of the machines were big old transfer lines from the 60's and 70's and had huge cupboards with old relay control systems. When PLC 2 came along it was cutting edge stuff. Miss those days.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Thank you, Chisel! It's a pleasure to have such experienced people like you here! Please let us know if you have any suggestions for future videos.

  • @Xxxcappie23
    @Xxxcappie23 2 ปีที่แล้ว

    Brilliant.Please do more of these schematics !!

  • @lloydkenny3320
    @lloydkenny3320 3 ปีที่แล้ว +21

    My guy, I'm first year instrumentation in a maintenance department and I find these videos very valuable. I've struggled with wiring diagrams and this has been very very informative. All the videos are. Please keep making more.

    • @Upmation
      @Upmation  3 ปีที่แล้ว +3

      Hi Lloyd! Great to have you here and thank for your input!
      We try to make the videos to be applicable in the actual industrial environments; but in a simple and easy-to-understand method at the same time. Happy you found them useful.

    • @guillermomathewskaungu2050
      @guillermomathewskaungu2050 9 หลายเดือนก่อน

      Instrumentation Artisan over here.

    • @jasonbourne2171
      @jasonbourne2171 4 หลายเดือนก่อน

      How'd you get a maintenance instrumentation job without knowing how to wire stuff or read wiring diagrams or power diagrams?

    • @lloydkenny3320
      @lloydkenny3320 4 หลายเดือนก่อน

      @@jasonbourne2171 I worked my ass off in the same industry and built contacts that lead me to a job that eventually lead me to an apprenticeship offer.

  • @gazyoung8490
    @gazyoung8490 3 ปีที่แล้ว +4

    this is brilliant and so helpful, thank you.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Hey Gaz! You're very welcome. Let us know if you have any suggestions.

  • @braincrackz
    @braincrackz 3 ปีที่แล้ว +4

    Ill always love to see more from this beautiful channel. Much love

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      Thank you very much! Happy you liked it. Stay tuned for more.

  • @sumedhasenanayake4254
    @sumedhasenanayake4254 2 ปีที่แล้ว +2

    Thanks for uploading these lesson series. This is the first time I have seen a comprehensive module on this toping. Thanks again

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Hey! You're very welcome! Thank YOU for watching!

  • @aliloni66
    @aliloni66 7 หลายเดือนก่อน

    very clear and functional

    • @Upmation
      @Upmation  7 หลายเดือนก่อน

      Glad you think so! Thank you for watching and please share this video with your friends or colleagues.

  • @junubando1322
    @junubando1322 2 ปีที่แล้ว

    thanks for additional info...

  • @sharifskijr.1257
    @sharifskijr.1257 3 หลายเดือนก่อน +1

    Thanks a mil

  • @ethans.550
    @ethans.550 8 หลายเดือนก่อน

    Thank you sir!

    • @Upmation
      @Upmation  8 หลายเดือนก่อน

      You're welcome!

  • @rokutime2627
    @rokutime2627 3 ปีที่แล้ว

    Subscribed. Really well explained! Keep up the good work!

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Hey! Thank you! Please stay tuned for future videos.

  • @kuldipsinghbhamra8635
    @kuldipsinghbhamra8635 2 ปีที่แล้ว

    Thanks sir its help me lot to read the drawing now, looking forwards for more videos thanks

  • @robertgachuhi5279
    @robertgachuhi5279 3 ปีที่แล้ว

    Very informative and useful,your description is on point.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Thank you, Robert! Glad you liked it.

  • @karthi.mkrishnaveni9596
    @karthi.mkrishnaveni9596 ปีที่แล้ว

    Excellent explanation sir please

  • @femifatola5746
    @femifatola5746 3 ปีที่แล้ว

    This is quite good. What brilliant way of teaching PLC diagram.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Thank you! Happy you liked it!

  • @adisharr
    @adisharr 3 ปีที่แล้ว +1

    Nice job! I never cared for the top - bottom orientation but I'm in the states so it's probably because I'm used to the left - right type. Great info. on the terminology used, that's also different than what you normally find here.

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      Hey! Thank you for the input! Yes, it completely depends on the country that the wiring diagram is designed for. As far as I know, this was meant to be used in a European country.

  • @annahabanna
    @annahabanna 2 ปีที่แล้ว +3

    Thank you for your clear and precise language. I wish I had a lecturer like yourself in my college

    • @Upmation
      @Upmation  2 ปีที่แล้ว +2

      Hi, Anna! Thank you for your compliment. It's amazing to hear that!

    • @annahabanna
      @annahabanna 2 ปีที่แล้ว +1

      @@Upmation My pleasure😊 Are you considering to create an online course at Udemy/Coursera/LinkedInLearning etc?

    • @Upmation
      @Upmation  2 ปีที่แล้ว +1

      @@annahabanna Hi, Anna! Sorry, we've missed your comment. We're preparing some courses for our own website. We'll announce that while getting ready. Thanks for asking!

  • @diwakar8765
    @diwakar8765 3 ปีที่แล้ว

    Great explanation.
    Simply outstanding

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Thank you! Happy you liked it! Please share it with your friends and colleagues on other social media to help spread the word.

  • @masumahmed7978
    @masumahmed7978 3 หลายเดือนก่อน

    Really was very good. Thanks

  • @hamidullahdarwaish4678
    @hamidullahdarwaish4678 3 ปีที่แล้ว

    Hello
    Its good recording and basic introduction.

  • @sharanapolicepatil7900
    @sharanapolicepatil7900 3 ปีที่แล้ว +2

    Really very good basis knowledgeable from part-1 & part-2 videos. Thank you so much for your effort 😊👌👌👌

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      You're welcome! and Thank you for your support. Please share this video with your friends and colleagues.

  • @natesansrinivasan2590
    @natesansrinivasan2590 3 ปีที่แล้ว +2

    Amazing explanation. I work in automation industry as maintenance technician. I sometime struggle with electrical troubleshooting. This will really be helpful for me. Thanks for this video. I expect more.

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      Thank you, Natesan! Happy that we could help you with this video. Please stay tuned for more videos.

    • @truthbebold4009
      @truthbebold4009 3 ปีที่แล้ว

      @@Upmation Greetings! Thank you for the video. It seems there is an error in the diagram. The 24v is connected to the PE of the PLC.

  • @andreyace8768
    @andreyace8768 3 ปีที่แล้ว +2

    Thank you for the informative and very useful video.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're welcome, Andrey! Thanks for your support.

  • @kizitoandi583
    @kizitoandi583 หลายเดือนก่อน

    Thanks for that

  • @adekolasulaiman2549
    @adekolasulaiman2549 2 ปีที่แล้ว

    Evert things about this channel is great and wonderful , sincerely , my supervisor at work still wonder about my source of knowledge.

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Hey, Adekola! It's really amazing to hear that! So share these videos with your supervisor as well! :)

  • @PMEUROPE
    @PMEUROPE ปีที่แล้ว

    Many thanks for this course

    • @Upmation
      @Upmation  ปีที่แล้ว

      You're very welcome! Thank you for watching! Please share this video with your friends or colleagues and let us know if you have any questions or suggestions.

  • @minwin8857
    @minwin8857 3 ปีที่แล้ว +1

    Very educational video. Thanks for sharing the knowledge.

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      Thank you for following us and happy learning!

  • @surajr1226
    @surajr1226 2 ปีที่แล้ว

    beautifully explained...looking forward for more such videos!!

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Thank you, Suraj! More to come! Please stay tuned.

  • @golnazjariani6283
    @golnazjariani6283 3 ปีที่แล้ว +5

    Thanks for your useful channel and videos

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      Hey Golnaz! Thank YOU for your comment and support.

  • @alphagassama7946
    @alphagassama7946 3 หลายเดือนก่อน

    very helpful. Thank you!

    • @Upmation
      @Upmation  2 หลายเดือนก่อน

      You're very welcome!

  • @timwilson8118
    @timwilson8118 3 ปีที่แล้ว +1

    Top to bottom.
    Left to right.
    Like a good book

  • @surendrakverma555
    @surendrakverma555 8 หลายเดือนก่อน

    Very good. Thanks 🙏🙏🙏🙏

    • @Upmation
      @Upmation  8 หลายเดือนก่อน

      You're very welcome! Thank you for watching!

  • @shintukumawat2645
    @shintukumawat2645 ปีที่แล้ว

    Thank you bro.... ❤️
    Your voice is so calm.
    I feel that it is not difficult to learn electrical after seeing your video.

    • @Upmation
      @Upmation  ปีที่แล้ว

      Glad to hear that, Shintu! and thank you for your complement :)

  • @himsanehassan6909
    @himsanehassan6909 ปีที่แล้ว

    Very thankfull for your content.

    • @Upmation
      @Upmation  ปีที่แล้ว

      You're very welcome! Thank you for watching!

  • @alro7779
    @alro7779 ปีที่แล้ว

    Very useful!!! Thanks!

    • @Upmation
      @Upmation  11 หลายเดือนก่อน

      You're welcome!

  • @peanutpotion
    @peanutpotion 3 ปีที่แล้ว +3

    amazing thank you so much! please do more

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're very welcome! Stay tuned for more.

    • @peanutpotion
      @peanutpotion 3 ปีที่แล้ว

      @@Upmation can’t wait for more! Just general navigation is really helping thank you

  • @syufrijal
    @syufrijal 3 ปีที่แล้ว

    thanks for your information about PLC panel wiring diagram...i loved it

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're very welcome! Happy you loved it! Stay tuned for more.

  • @shamiulshakib5307
    @shamiulshakib5307 2 ปีที่แล้ว

    Thanks for making this video. That was very helpful for me.

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      You're very welcome! Thank YOU for watching!

  • @johnangelodelacruz6431
    @johnangelodelacruz6431 3 ปีที่แล้ว

    More on this kind of lessons please. Thank you

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      Hi John! Of course! We have planed to make more videos like this.

  • @redmountain634
    @redmountain634 3 ปีที่แล้ว

    i wactched all off video your channel i need more

  • @mannah7l223
    @mannah7l223 3 ปีที่แล้ว

    So helpful. Thanks.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're welcome! Happy learning!

  • @mohamedhsk8954
    @mohamedhsk8954 2 ปีที่แล้ว

    God bless you man please keep going

    • @Upmation
      @Upmation  2 ปีที่แล้ว +1

      Hey, Mohamed! Thank you very much and we definitely do! :)

  • @AbdullahAhmed-vj2vi
    @AbdullahAhmed-vj2vi 3 ปีที่แล้ว +2

    Keep going. Thanks a lot

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're welcome!

  • @fantech72
    @fantech72 หลายเดือนก่อน

    Thanks for your explanation, you are the best. But can you please, make a video of electrical control devices like the programable relays, limit switches, vibration switches, heater installed inside electrical motors etc, and their electrical diagrams. Thanks

  • @abujafor7915
    @abujafor7915 2 ปีที่แล้ว

    Thank you so much.

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Always welcome!

  • @hectortorres542
    @hectortorres542 3 ปีที่แล้ว

    Thank you so much for this helpful video

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Hi Hector! You're very welcome! Please share this video with your friends and colleagues on other social media.

  • @sergioresendes4116
    @sergioresendes4116 3 ปีที่แล้ว

    Very important information. Congratulations.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Thank you! Please stay tuned for more.

  • @DlerRashid
    @DlerRashid 10 หลายเดือนก่อน

    very good video, simply describing elements and connections, Thanks

    • @Upmation
      @Upmation  10 หลายเดือนก่อน

      You're very welcome! Great to hear it was helpful!

  • @ahmed75502
    @ahmed75502 ปีที่แล้ว

    Thanks for your presentation 🌺🌺🌺

    • @Upmation
      @Upmation  ปีที่แล้ว

      You're welcome, Ahmed!

  • @lakshmananmarimuthu2112
    @lakshmananmarimuthu2112 ปีที่แล้ว

    Good explanation, thanks

    • @Upmation
      @Upmation  ปีที่แล้ว

      You're welcome! Glad you liked it. Please share it with your friends and colleagues.

  • @phyoyarzarhein3899
    @phyoyarzarhein3899 2 ปีที่แล้ว

    Its really helped me alot . Thanks

    • @Upmation
      @Upmation  2 ปีที่แล้ว +1

      You're very welcome!

  • @parush2007
    @parush2007 3 ปีที่แล้ว

    Thanks for this informative video

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're very welcome, Parush!

  • @athilaldurry5880
    @athilaldurry5880 3 ปีที่แล้ว

    Many thanks for wonderful information

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're very welcome, Athil!

  • @alwaga7917
    @alwaga7917 2 ปีที่แล้ว

    nice this explaine

  • @kaluhenrietta6799
    @kaluhenrietta6799 11 หลายเดือนก่อน

    Very informative. Hope to see more of this applied in troubleshooting.

    • @Upmation
      @Upmation  11 หลายเดือนก่อน

      Happy you liked this video! Sure, we will publish videos on troubleshooting as well.

  • @ClaudinneV
    @ClaudinneV 2 ปีที่แล้ว

    Awesoooomeee!!! thanks guys!

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      You're very welcome, Claudia!

  • @simpliciocamirino2271
    @simpliciocamirino2271 3 ปีที่แล้ว +1

    Thank you for your sharing sir,goodluck.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're very welcome and thank you!

  • @alphab5543
    @alphab5543 2 ปีที่แล้ว

    Many thanks for this excellent video

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Welcome! Thank you for your support.

  • @AnasAl-Dhafiri
    @AnasAl-Dhafiri 3 ปีที่แล้ว

    Many thanks for this video and please make more videos like this how to red electrical diagram .
    Best wishes

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      You're most welcome! Thank you for watching! Sure thing! I'll transfer your suggestion to the team.

  • @ahmadawawdeh2257
    @ahmadawawdeh2257 2 ปีที่แล้ว

    Very informative and easy to grasp Videos. Keep it going ...

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Thanks, Ahmad! Will do!

  • @kiranchoudhari4717
    @kiranchoudhari4717 3 ปีที่แล้ว

    Very happy for this video

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Happy you liked it!

  • @circleoftech94
    @circleoftech94 2 ปีที่แล้ว

    thank you!!

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      You're very welcome!

  • @warren286
    @warren286 ปีที่แล้ว +3

    I'm an American electrical tech, but I deal with foreign manufacturers, such as Rolls-Royce and Siemens, documents a lot. Learning the addressing system from your first documents video was huge! I feel dumb for not figuring out that tbe decimal was for the column. 😅

    • @Upmation
      @Upmation  ปีที่แล้ว

      Hey, Warren! Thanks for sharing. Electrical techs should be lifelong learners by the way! Stay tuned for the next episodes.

  • @michaeloneill151
    @michaeloneill151 8 หลายเดือนก่อน +1

    Love your videos, however, can you check between 1 minute 50 seconds and 2 minutes to see if you have made a mistake when labelling the 24v, OV and earth cabling to the PLC. It's obviously minor but I would like to know for clarity. Thanks!

    • @Upmation
      @Upmation  8 หลายเดือนก่อน +2

      Hi Michael! It's great to hear you liked the videos! You are absolutely right.

  • @eng.elfarajani1416
    @eng.elfarajani1416 3 ปีที่แล้ว +1

    thank you so much

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're very welcome! :)

  • @Honeybatger
    @Honeybatger 2 ปีที่แล้ว

    Thank you very much

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      You're very welcome!

  • @md.alamgirbadsha8593
    @md.alamgirbadsha8593 3 ปีที่แล้ว

    Thank you for the informative and very useful video.Thanks for your useful channel and

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're very welcome! :)

  • @amitprajapati8439
    @amitprajapati8439 3 ปีที่แล้ว

    Thanks a lot for easy understanding videos..
    Pls make more videos for plc program example , like u make before water filling tank control👍
    Also I would like to watch communication and networking of industrial automation.

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      Hi Amit. You're welcome and thank you for your suggestion. Yes, we'll definitely publish more videos on PLC programming examples.

  • @muhammadshafique235
    @muhammadshafique235 2 ปีที่แล้ว

    Thanks

  • @harunorrashid9016
    @harunorrashid9016 3 ปีที่แล้ว

    Thank you very much. I am follow your TH-cam channel.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're very welcome and thank you for your support.

  • @sreenivasuluanumakonda4593
    @sreenivasuluanumakonda4593 2 ปีที่แล้ว

    Very good presentation and narration

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Hey! Thank you very much for watching! Please let us know if you have any kind of suggestion or question. And please don't forget to share the video with your friends and colleagues :)

  • @muscleman4799
    @muscleman4799 2 ปีที่แล้ว

    Started my control system career and this make wiring diagram easy to read after knowing this now

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Perfect then! Great to hear that and happy learning! Please let us know if you have any questions or suggestions.

  • @avisivengat1183
    @avisivengat1183 7 หลายเดือนก่อน

    Hi 👋 sir good explanation thank so much

    • @Upmation
      @Upmation  7 หลายเดือนก่อน

      You are welcome! Thank you for watching!

  • @helloworld892
    @helloworld892 3 ปีที่แล้ว

    Impressive explanation

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Thank you! Please stay tuned for more.

  • @rajithmr2159
    @rajithmr2159 3 ปีที่แล้ว

    superb explaination

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Thank you, Rajith!

  • @youssefhassan4384
    @youssefhassan4384 5 หลายเดือนก่อน

    hi can you tell me how did u build the vfd block or which website u used to grab it , and the plc too

  • @topeanjorin5033
    @topeanjorin5033 3 ปีที่แล้ว

    Thank you so much, I really learn alot can you please do video on troubleshooting techniques with panel using wiring diagram

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're very welcome! Yes, it's a very good suggestion! I'll transfer it to the team. Thank you!

  • @grizzli1994
    @grizzli1994 7 หลายเดือนก่อน

    This video is excellent, is there any chance of getting a PDF version of the drawing package for further review?

    • @Upmation
      @Upmation  7 หลายเดือนก่อน

      No, unfortunately, it is not possible to share the document. Thank you for your understanding.

  • @edisupono2335
    @edisupono2335 2 ปีที่แล้ว

    Good 👍

  • @ramniwassharma9518
    @ramniwassharma9518 2 ปีที่แล้ว

    Very good explanation

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Great to hear that! Please stay tuned for more.

  • @sandeshsonawane3868
    @sandeshsonawane3868 3 ปีที่แล้ว

    Very nice explanation till date I never saw such a great video on PLC wiring

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Hey, Sandesh! Hope we can help you thru the future episodes of this video as well. Please share this video with your friends and colleagues to help spread the word. Thank you!

    • @sandeshsonawane3868
      @sandeshsonawane3868 3 ปีที่แล้ว

      @@Upmation Definitely I share video with my friends and colleagues

  • @suriyat8773
    @suriyat8773 2 ปีที่แล้ว

    Thank you

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Welcome!

  • @heroldguadalupe7826
    @heroldguadalupe7826 3 ปีที่แล้ว

    Informative and helpful video. I request to make a video on how Electronics Main Engine works.👍Thumbs up for this one.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Hi Herold! Thanks for your nice comment. Could you please provide more details on your request?

  • @ahmedessam3280
    @ahmedessam3280 3 ปีที่แล้ว +2

    Thx for this a great video and u r deserve more than like and subscribe 😍😍

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Thank you very much for your support, Ahmed!

  • @evancebunde8314
    @evancebunde8314 2 ปีที่แล้ว

    Very nice,and I agree

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Thank you!

  • @gusainmoses6441
    @gusainmoses6441 3 ปีที่แล้ว +1

    Thank you so much. This is such a great channel. keep up the good work. Will it be possible to get a copy of the wiring diagram please.

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      Hi Gusain! Thanks for your comment!
      We already have communicated with the manufacturer company to see if we can share the whole document with our follower and subscribers like you. But at the end of the day, if we did not receive any positive answer, I assume we can share at least the pages we have discussed in this video and part 1. Till then you can read and see the step by step article here: upmation.com/plc-wiring-diagram/

  • @toyinorodare4072
    @toyinorodare4072 2 ปีที่แล้ว

    Thank you for this Video.
    My Mission is to Learn Control in 2022 and I will achieve it successfully.

    • @Upmation
      @Upmation  2 ปีที่แล้ว +1

      Hey, Toyin! Happy to hear that and wish you the best on your 2022 goals. Don't hesitate to contact us in case you need help down the road.

  • @talalboss2857
    @talalboss2857 3 ปีที่แล้ว

    very useful.....thanx

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Hey! You're very welcome! Let us know if you have any questions or suggestions.

    • @talalboss2857
      @talalboss2857 3 ปีที่แล้ว +1

      I will do.... thanks a lot

  • @mateosena571
    @mateosena571 ปีที่แล้ว

    Thank you friend for your video it helped me a lot to get started in the world of plc programming, ask what software you use to create the electrical plans and what is the standard for the electrical plans.
    Thank you

    • @Upmation
      @Upmation  ปีที่แล้ว

      Hey! You're very welcome! The software that is used to create these electrical diagrams is EPLAN and the standard is IEC.

  • @dakotahrivers6640
    @dakotahrivers6640 4 หลายเดือนก่อน

    I have an interview for a controls engineer position only a few days after graduating college this semester, cramming hard to understand this!

  • @flaviopugliese8324
    @flaviopugliese8324 2 ปีที่แล้ว +1

    does any other youtube professor want to say that at min 1:54 there's a typo, instead of making the congrats for this good video? thanks!

    • @Upmation
      @Upmation  2 ปีที่แล้ว

      Ah! Thank you very much to mention that! But don't worry! We decided to assume these comments are originating from being over-attentive or being meticulous! :) Hope they use this trait for learning the useful points in the videos as well! BTW, thank you for your comment.

  • @marwansadeq3649
    @marwansadeq3649 3 ปีที่แล้ว

    Great video 👍👍👍, i want that wiring diagram pdf plz to be understand more 😘😘

  • @marlonzapata8240
    @marlonzapata8240 3 ปีที่แล้ว

    I liked a lot both videos, it's an important information for me. I have a question, what is the exact normative to desing this type of electrical diagrams ? Greetings.

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Hi, Marlon! Thank you for your interest in our videos. There are different standards for drawing electrical diagrams but the whole idea is the same.

  • @warasali7875
    @warasali7875 3 ปีที่แล้ว

    very Good So Beautiful Chanel

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      Many thanks!

  • @omarelmasri7749
    @omarelmasri7749 3 ปีที่แล้ว

    Thanks for the video.
    Is there a reference book related to the same topic you suggest?

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      You're very welcome! I am actually not aware of that. But I think these are the things which may vary from one drawing to the other and the whole idea and symbols are the same. By experiencing different drawings you get more confident.

  • @ersandeep6363
    @ersandeep6363 7 หลายเดือนก่อน

    Hey! well elaborated! Your vedios helped me a lot.
    But please tell explain every tags/numbers assigned between 24v and 0v
    e.g in Page 60 col 0 (60.0) what is+EP1, 024 in bottom, 6011…6021. These are for what..
    Please tell me

  • @minhtam5051
    @minhtam5051 2 ปีที่แล้ว

    Hi! Is there any chance I can download the material? That would be great if I can have some hands-on experience with the diagram.

  • @balajijoo5471
    @balajijoo5471 3 ปีที่แล้ว

    It is really nice and👍👍👍👍

    • @Upmation
      @Upmation  3 ปีที่แล้ว

      ... and many thanks for watching us! :)

  • @AnasAl-Dhafiri
    @AnasAl-Dhafiri 3 ปีที่แล้ว

    Many thanks sir I hope you can make more videos about how to red electrician diagram. Kind Regards

    • @Upmation
      @Upmation  3 ปีที่แล้ว +1

      You're very welcome! Sure we will! I'll transfer your suggestion to the team. Thank you!