Electrical Panel Enclosure | Baying Systems, Panel Compartments, Panel RAL Color, Lifting Eyebolts
ฝัง
- เผยแพร่เมื่อ 8 มิ.ย. 2024
- ✅ Join us here, get awesome perks, and support us, all at once:
/ upmation
In Part 1 of this video series on Electrical Control Panel Basics, you've learned about the "Wiring" of the electrical control panels and in that tutorial, I just pointed out the electrical panel enclosures.
👉 Watch Part 1 here:
How Electrical Control Panel Works ▶ • How Electrical Control...
In Part 2, I've discussed different aspects of the electrical control panel enclosures. You learned about some tools (like a hole saw cutter and a metal reamer) and devices (like cable glands, cable grommets, etc.) and how to use those tools and devices in your electrical panel and cabling works.
You also learned about the Electrical Panel IP ratings and NEMA ratings and how to keep and improve these Ingress Protection Ratings while working with the panels.
👉 Watch Part 2 here:
What is an Electrical Control Panel? ▶ • How Electrical Control...
In this part (Part 3), we'll continue our Electrical Panel Enclosure discussion and you'll gain more practical knowledge about them. You'll learn about:
- The baying system configurations,
- The enclosure compartments,
- Wiring ducts,
- Electrical Panel RAL Standard color codes,
- Lifting eyebolts,
and so on.
As you’ve seen in the previous part, the panel has a steel sheet inside, known as the mounting plate that we have to dismantle and install some Wiring ducts on that before we do anything else.
Ducts are a kind of organizing component that we route the wires inside the panel using them. I’m going to add another point here about Wiring ducts.
In the electrical control panels, in some routes we have more wires and, in others, we have fewer.
So, we should consider the depth and the width of every piece of wiring ducts according to the volume of the wires we’re gonna lay into them.
It is not only about the size of the wiring ducts, but the dimensions of the Enclosure have also a significant impact on the comfort of wiring and installation of the electrical components inside the panel.
Obviously, the more electrical components we have to install inside the panel, the bigger the size of the electrical panel should be.
In addition to the number of components, the purpose of usage can also impact the size, type, and configuration of the enclosure.
Generally, an electrical panel enclosure is comprised of a chassis or frame and some plates on its different sides that can be dismantled and assembled pretty easily to provide different configurations known as enclosure baying systems. Let me give you an example.
Consider a Motor Control Center or MCC panel. This panel has three separate compartments with different dimensions that are attached to each other.
These electrical MCC panels are actually a kind of side-baying system in that separate panels are connected side by side.
👉 We also strongly recommend you to watch these videos about Wiring Diagrams:
▶ How to Read Electrical Diagrams: upmation.com/wiring-diagrams/
▶ How to Read PLC Wiring Diagram: upmation.com/plc-wiring-diagram/
===========================
✅ Please SUBSCRIBE to get notified about the new videos: bit.ly/32mlhu9
===========================
Timestamps of this video:
0:00 What do you learn in this video?
0:24 What is a wiring duct and how do we specify its size?
1:11 Size of the Panel Enclosure and the Electrical Panel Usage
1:42 Panel Enclosure Compartments (MCC Panel Example)
2:53 Baying system configurations
3:13 Electrical Control Panel Enclosure Dimensions
3:47 How to lift and move an Electrical Control Panel
4:20 Industrial Control Panel Enclosure Color Codes (RAL Standard Color)
===========================
▶ If you've missed our most recent videos, watch them here:
How to Draw a Wiring Diagram and Turn it into a PLC Program (Reverse Forward Starter)
• How to Draw a Wiring D...
How to Use a PID Temperature Controller (ON-OFF Control Application)
• How to Use Temperature...
How Solid State Relays Work
upmation.com/solid-state-relay/
===========================
▶ If you want to become a confident PLC programmer, don't miss this free "Siemens PLC Training" course (This course will be continued):
Part 1: Up & Running with PLC Ladder Programming
upmation.com/plc-hardware-con...
Part 2: How to Write PLC Ladder Program?
upmation.com/ladder-logic-plc...
Part 3: How to Simulate the PLC Program?
upmation.com/simulate-the-plc...
Part 4: Motor Start and Stop Ladder Logic PLC Program
upmation.com/plc-program/
===========================
FOLLOW US on other Social Media
👉 INSTAGRAM ▶ / upmationdotcom
👉 TWITTER ▶ / upmation
👉 FACEBOOK ▶ / upmation
👉 LINKEDIN ▶ / upmation
===========================
#PanelEnclosure #ElectricalPanel #Upmation
The way the animation was made is easy to understand, and the way it was narrated in simple english makes it easy to understand by even a Non technical person. I appreciate the efforts and the amount of time spent in creating informative tutorials like this. Keep up the work and hats off for the informations and details.
I have few suggestions or questions,
1, What is the recommended sheetmetal material to make Enclosures?
2. What should be the general thickness of the sheetmetal used for Enclosures?
Please give me your comments and do the needful. Thanks.
Thank you for clearer explanations and detailed content. Referencing to separate yet connected great video contents, it makes it easier to follow. I'll be glad if you could make more automation videos.
Hi, Richmond! Thank you for leaving your comment. It's great to see you liked our videos and we definitely will create more automation-oriented videos. Stay tuned.
@@Upmation Looking forward to your future videos!
That you
Upmation for what you do!!!
It's our pleasure to help people. Thank YOU for watching!
Valuable and useful content. Thanks for sharing.
You're very welcome, Saeid! Thank YOU for watching and letting us know your feedback.
Practical concepts with excellent display.
Thank you so much, Golnaz! It's great to hear that! Please stay with us for more.
thanks for all your videos. The explanation and detail that they put into making them is just great.
I am attentive to the following videos.
You're very welcome, Erwin! Thanks for leaving a comment and yes, please stay tuned for more of these videos.
Thank you !, very informative, Please keep making more !
You're welcome! Sure we will! Please stay tuned for more of these videos.
Incredible illustration and explanation thank you
You're very welcome! Enjoy!
Thanks for all videos. Its helping me a lot.
You're very welcome and happy it helped you! Please stay tuned for more.
great explanation dear!
Very clear , thank you so much.
You're very welcome! Please let us know if you have any questions or suggestions and share this video on other social media. Thank you!
Hello my friend, the video was great. I am an electrician and I have an electrical training channel and I do the wiring of industrial switchboards.
This channel is wonderful … thank you so much!!!
You're welcome, Joel! and thank you for your comment.
@@Upmation I appreciate alot… I am an Electrical Engineering in training and I’m supervising the wiring and termination of control relay panel (CRP) at one of the newest substation in my country (Liberia).
@@joelgobeh7343 Awesome! So let us know if you have any kind of suggestions about the future subjects and good luck with your project!
@@Upmation for a suggestion, I think ladder logic programming to solve different real world problems could be great. It's most of the time easy to learn about different technologies but it's quite difficult to get our brains trained to creatively solve difficult problems. I think I've already suggested this in another comment
@@roseelectronics4582 Good idea! Yeah, we try to continue the PLC programming courses on TH-cam with this idea in mind. Thank you for your suggestion!
Love it
Hey bro, very good info, btw, im very looking forward for your next coming videos related to DCS/PLC hardware wiring if available 😁
Hey! Sure! Please stay tuned.
I just have to say: Congratulations!
Thank you very much! Happy you liked it.
Very good and detailed video series on control panels.
I would request if such educational content can be uploaded more frequently like 2-3 videos in a week....
However thanks for content shared till date....
Hi, Paring! Thank you for watching! We do our best to increase our resources and upload more videos. Thanks for your support.
Very very good 👍
Many thanks for your support!
Hi there, waiting for your part 03🙌
Hey, Devashish! Thanks for your comment. Please stay tuned.
Hello friend! A very important video from your side.I had to observe installation errors in the work, because of which the PLC failed)
Thank you very much! I see! Yes, some issues in the panel could be originated from bad installation, cabling, and wiring.
@@Upmation Hello friend! I wish you a happy New Year!!! I wish you success in the development of your channel in You Tube!!!He will be the best, there is no doubt about it!
@@razerimperator231 Hey, Razer! Happy new year! We try to get back up and restart again in 2022. Thank you for your comment and support.
Very nice video
Great t hear that! Please stay with us for more of these videos.
Thank you 😘 😘
Welcome!
Can you tell us please what kind of software you are using we are amazed by the quality of the presentation
Hello sir, when will you launch your automation course....
The word amazing does not satisfy your efforts in the video.
Respect man
Wow! Thank you so much for your comment and support! We appreciate that! Please share the video with your friends to spread the word.
Thank you for the knowledge sharing. I follow your contents, please Sir could you do videos on MV/LV enclosure wiring details?
Hey, Noel! Yes, I will transfer your suggestion to the team for the future videos. We did not publish a new video for a long time but we are trying to restart again. Thank you!
Good evening, dear friend! I really want to see your new videos.
Hey, old fan! :) Hope all is well! We're busy with some time-consuming administrative works of the business and will get back to video production soon. We try to make it stable by the beginning of 2022. Thank you for leaving a comment.
Good afternoon! Can you please tell me, how you make videos? How is animation done?
Sir pls make video on how to read electrical schematic diagram, and make more videos your explanation is very understandable
Hey! These two videos might be helpful to you:
How to read electrical wiring diagrams: th-cam.com/video/GHhcyH99inE/w-d-xo.html
How to read PLC wiring diagrams: th-cam.com/video/ksdVnODI3yw/w-d-xo.html
@@Upmation 👍 thank you very much
You forgot to mention the best practive to use multiple cable ducts for different voltage and/or purpose (eg. 230 VAC, 24 VDC, Instrinsically-Safe signals).
And the usage of blue ducts for IS signals...
Hey, Adam! Thank you for the input! Yes, these are perfect points to discuss. There could be even a video discussing solely about wiring ducts. Thanks anyway!
Can you do a video on safety relais?
Yes, of course! I'll transfer your suggestion to the team. Thank you!
I want to know what is the difference between level transmitter and pressure transmitter please make a video on this topic also
Thank you for your suggestion, Manish! Will consider that for sure.
Can you explain how to connect closed proximity sensor PNP to siemen logo?..also start and stop pushbutton to siemens logo
Yes, of course. I'll let the team know about your suggestion. Thank you!
This one is a realpars killer!
Same as I was thinking, but I think both realpars and upmation make automation fun and easier to learn and develop confidence to work effectively.
👍
Nice channel.
Please Upmation we are overdue for a new upload 😔
Hey, old fan! :) Yes, we unfortunately could not publish a new one for a pretty long time. Thank you for still being a support. We try to get back up and continue. Thank you!
@@Upmation Can you please provide "join" in your TH-cam channel through which we can make payments to support your channel
When will be next video?
Second
Thank you for watching! Please spread the word by sharing this video with your friends or colleagues. Thanks!
First
Hi! Thanks for watching! Please share this video with your friends. Thank you!
Dear, Sir, can I get your Email.
Hi there! You can find our contact email via the About section of the page or you can leave us a message via the website. upmation.com/contact-us/
Everything is going to hell in a handbasket. Buy yourself some Shiba Inu Bitcoin. So you have some money that's not in the dollar if and when the dollar is devalued....