Model can be downloaded here; Static version; cults3d.com/en/3d-model/various/the-toy-factory-static-version Bundle version; cults3d.com/en/3d-model/various/the-toy-factory-bundle
Thank you for this video! I have built both haunted houses and felt that was a ton easier. The instructions on this one are confusing. You walking through the steps is a huge help in getting this thing put together piece by piece :)
Hello 3DPP, I am new to your channel I am in the research phase on 3D printing trying to find the printer that fits me best I am not there yet! I am very experience many decades worth in handyman/model maker builder IMO you were using to far much glue unless you were told to spead it everywhere in the joints like you did! IMO the amount of glue you had could build 5 or 6 modles like the one you have; the parts are not under any kind load you need worry about, but the moving parts need a little more glue but less than what you did; plastic bonds real well to other plastic PLA to PLA should bond better than PLA to TPU there you need to rethink but otherwise a little glue goes a long way with plastic hit the keys part of the joint your about to put together no need to cover the whole joint that to much glue, the longer the joints you need a little more that is true! In most cases a part that joint to another part that is about a foot long needs at most with to much over add glue would 8 to 10 drops IMO I would do 6 drops space out some what evenly get both ends and do the middle with four more drops now if you worry do ten; always get the ends and a few time the middle is a great reference to most plastics this is not true for wood and paper! IMO the glue you have is like super glue you said it sets and drys quickly or it was on all purpose glue which is a little longer to dry both would work just fine if you run out! Anyhow good luck loved the video thumbs up you did well watch to the end NEW SUB! What part I like most is the building of the model any kind of puzzle that needs to be put together is the best part to me, I am a builder that what I do best again thanks!
Thank you Ivan! Great feedback, definately made me red a little bit ahahah. Yes, I do too believe I over did it with glue. Definately noted and will adjust for future models.
Model can be downloaded here;
Static version;
cults3d.com/en/3d-model/various/the-toy-factory-static-version
Bundle version;
cults3d.com/en/3d-model/various/the-toy-factory-bundle
Thank you for this video! I have built both haunted houses and felt that was a ton easier. The instructions on this one are confusing. You walking through the steps is a huge help in getting this thing put together piece by piece :)
❤❤❤❤❤❤❤❤❤thank you very much ❤❤❤❤❤❤ great job . Very detailed and informative. Perfect!
I love it!! 🥰 😘🔥
😍😍👌
Whats the cost - + of this build?
I calculated $180 (CAD). That's total use of the filament, not initial cost of buying the filament.
Includes glue, leds and anything else.
Hello 3DPP, I am new to your channel I am in the research phase on 3D printing trying to find the printer that fits me best I am not there yet! I am very experience many decades worth in handyman/model maker builder IMO you were using to far much glue unless you were told to spead it everywhere in the joints like you did! IMO the amount of glue you had could build 5 or 6 modles like the one you have; the parts are not under any kind load you need worry about, but the moving parts need a little more glue but less than what you did; plastic bonds real well to other plastic PLA to PLA should bond better than PLA to TPU there you need to rethink but otherwise a little glue goes a long way with plastic hit the keys part of the joint your about to put together no need to cover the whole joint that to much glue, the longer the joints you need a little more that is true! In most cases a part that joint to another part that is about a foot long needs at most with to much over add glue would 8 to 10 drops IMO I would do 6 drops space out some what evenly get both ends and do the middle with four more drops now if you worry do ten; always get the ends and a few time the middle is a great reference to most plastics this is not true for wood and paper! IMO the glue you have is like super glue you said it sets and drys quickly or it was on all purpose glue which is a little longer to dry both would work just fine if you run out! Anyhow good luck loved the video thumbs up you did well watch to the end NEW SUB! What part I like most is the building of the model any kind of puzzle that needs to be put together is the best part to me, I am a builder that what I do best again thanks!
Thank you Ivan!
Great feedback, definately made me red a little bit ahahah. Yes, I do too believe I over did it with glue.
Definately noted and will adjust for future models.
Did you print the tpu on the textured plate that comes with the A1? If so any problems getting print off the plate?
Hey there, no had no issue taking it off. At around 11:31 - 11:38 mark you can see me taking it off.