Thanks for the very instructive video! I was able to replace the control motor on a 2018 Kia Sportage. Everything went well except I dropped the 8mm screw/bolt that goes to the hose bracket never to be seen again.
Great video! I just did a replacement today after watching your video. It was a little more of a challenge than you had but, without knowing the process in advance it would have been much more difficult! As a side note, I discovered I could have fixed my P200A error with no parts required because the "actual" problem was related to the pivot arm being locked in place due to rust, where it attaches to the output arm of the motor. I made certain to clean it up before transferring it to the new motor.
You are amazing! This was one of the best, if not the very best, instructional video I have watched. You didn't waste any of my time with needless jabber. You spoke clearly and you worked at a pace that could easily be followed visually. You explained some of the final points that the average nonprofessional might've overlooked and you saved me a great deal of time and money! Mark you now have a new subscriber and a tip coming your way!
Great video my wife's car just had the same problem and I wasn't sure if I was going to be able to fix it myself. You made it look really simple. Thanks
I had P1326 code on my 2018 Kia Sportage. I replaced the VCM and now I'm getting P2017 & P2008 codes. I noticed when you installed the white piece with the clip, you didn't look to see if the indicator goes to the left or right of stop. Can you verify if it matters which side the white tab belongs to?
Well did mine on 2020 Kia Sportage with 25,000 miles. But I found when I took it off. The rod was rusted to were it goes on. Had to use pentrenting oil to loosen it. So I could get it off. I had to break it loose just to rotate on the shaft. I'm assuming that what caused the issue with mine. Nice to live in the rust belt.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I used this video to successfully complete this job. I wanted to take a moment to thank you for creating these videos.
Thanks for the very instructive video! I was able to replace the control motor on a 2018 Kia Sportage. Everything went well except I dropped the 8mm screw/bolt that goes to the hose bracket never to be seen again.
Great video! I just did a replacement today after watching your video. It was a little more of a challenge than you had but, without knowing the process in advance it would have been much more difficult! As a side note, I discovered I could have fixed my P200A error with no parts required because the "actual" problem was related to the pivot arm being locked in place due to rust, where it attaches to the output arm of the motor. I made certain to clean it up before transferring it to the new motor.
+@DavidZelward Thanks for watching our video! 1aau.to/m/Shop-TRQ
Thanks for clear and consise instructions. This and your two shock/strut replacement videos has really spruced up my ride.
You are amazing! This was one of the best, if not the very best, instructional video I have watched. You didn't waste any of my time with needless jabber. You spoke clearly and you worked at a pace that could easily be followed visually. You explained some of the final points that the average nonprofessional might've overlooked and you saved me a great deal of time and money! Mark you now have a new subscriber and a tip coming your way!
Thank you for the quality video! I just replaced this on my Girlfriend’s 2016 Kia Sorento and your video made it an easy and quick job!
Great video my wife's car just had the same problem and I wasn't sure if I was going to be able to fix it myself. You made it look really simple. Thanks
Thanks alot bro it was amazing i did it in less than 30 minutes keep going you are the best 🎉
Exelente explicación!! Distinto idioma pero con ver el proceso muy entendible.
Does you part come with the arm piece to rhe the motor or do you use the same one?
After changing the runner, do you have to “re-learn” the ecm?
Yooooo this is smooth my boi never stop 🔥🔥🔥
Good video, very well explained, I would like to see a video on how to remove the throttle body on a 2015 sonata with a 2.0t engine.
I had P1326 code on my 2018 Kia Sportage. I replaced the VCM and now I'm getting P2017 & P2008 codes. I noticed when you installed the white piece with the clip, you didn't look to see if the indicator goes to the left or right of stop. Can you verify if it matters which side the white tab belongs to?
This guy is the best 🙏
How much time from start to finish does this take for a seasoned Mechanic?
Does this repair the P"1326
So helpful and informative!!! Thank you! 😊
Awesome walk through instructions Thx
The arm keeping coming off while driving even though I had that audible click, any tips?
Broke the white part that controls the opening/closing of the shaft? can we get this part separately?
Well did mine on 2020 Kia Sportage with 25,000 miles. But I found when I took it off. The rod was rusted to were it goes on. Had to use pentrenting oil to loosen it. So I could get it off. I had to break it loose just to rotate on the shaft. I'm assuming that what caused the issue with mine. Nice to live in the rust belt.
Скажите пожалуйста, можно ли устранить ошибку P200A00 при замене этого моторчика?
My part didn’t come with that white arm piece, what is it called so I can order it?
Can this be the reason for high rpm during idle?
Great video very instructive thanks!!!
Excellent video thumbs up pro.
Hyundai sonata 2017, P2600 error can be resolved like this
Great video thanks you save me some money
Thanks!
Thanks a lot for your efforts
Research indicates that this could also fix the p0001 bank 1 actuator fail
Made it look easy
Awsome details....
Absolute chad
That p2004 code
very nice
Great video. Perfect instructions!! Thank you