I need your help!! I have a 2005 isuzu npr-hd gas and I'm trying to replace my parking brake, the (drum/ rotor) got hot spots from parking brake engaged while driving. But nobody knows where to get it for my isuzu that's not $3000!!!
Hi I have a 95 nor with the identical drum brake. How can you remove it? The nuts around just spin. The center nut I was able to remove. Any thoughts? Thanks
Hey sir, my question is about checking the rear brakes for irregular wear, broken shoes, or damaged or bluing drums. How could I check this as a driver? Thanks
Great video I have a npr and was driving it hit a bump and it stop pulling im thinking the transmission broke because I don't have forward or reverse gears only park what u think about that one?
I’m dismantling the handbrake so I can rebuild it. I have removed the nuts that fasten the driveshaft yoke to the drum but I am unable to separate the yoke from the drum. I have soaked it with pb blaster and have tried to separate it with pry bars and mallets with no luck.I was wondering if you can provide contact information so I can talk to you about it.
I have already separated the driveshaft and it is hanging on a block. I have plenty of room to separate the yoke and drum but it appears it is frozen at the mating surface. I spoke with a local mechanic and they said they sometimes have to use an air hammer and chisel. I’m hesitant to do this for fear of damaging the transmission. A puller of some kind would be ideal but I can’t find a type specific puller and all of the universal pullers I have seen have the extraction screw in the center where as in this part the screws would need to be offset against the drum.@@Nprdoctor
Great video. This will help me a lot. Thank you for posting. You mentioned that a driver damaged the tail shaft by using the hand brake while moving. Can you use the hand brake for stopping in an emergency situation? Will this cause damage to the transmission?
It is always a good idea to inspect all components involved when using the e brake for an emergency stop. The truck was leaking fluid out of the back of the transmission, so we replaced the seal. Another couple of weeks passed and it started leaking again. We took the truck to our local transmission shop. They informed us that it was common for the tail shaft of the trans to get damaged from engaging the brake while moving. Glad this video helped!
Thanks for the video. Any Isuzu NPR type content is gold!
Om my 2005 elf my ABS and ASR light keeps coming on
I need your help!! I have a 2005 isuzu npr-hd gas and I'm trying to replace my parking brake, the (drum/ rotor) got hot spots from parking brake engaged while driving. But nobody knows where to get it for my isuzu that's not $3000!!!
thanks for a great video and like steve said for the extra info!
Thanks buddy, very helpful.
Great video, just saved me a lot of time looking under the truck
Hi how u adjust on 2005 Nissan UD 1300? Thx
Do you have a video off changing the shoes
Great info....any info on the exhaust brakes?
Very helpful, thanks
Hi would this be a similar setup to a old 1984 isuzu tld24?
Hello una consulta como saco si se quedó pegado el freno de estacionamiento como lo podría sacar el tambor???🙋
Hi I have a 95 nor with the identical drum brake. How can you remove it? The nuts around just spin. The center nut I was able to remove. Any thoughts? Thanks
Thanks
Thanks
Where you located I need break and transmission work done on a 1995 Isuzu NPR
Hello. Thanks for the video. I woukd like a video showing the instalation off this shoes please
Hey sir, my question is about checking the rear brakes for irregular wear, broken shoes, or damaged or bluing drums. How could I check this as a driver? Thanks
Great video I have a npr and was driving it hit a bump and it stop pulling im thinking the transmission broke because I don't have forward or reverse gears only park what u think about that one?
How do you turn off the beep
Very helpful, thank you.
Very helpful! thank you
I’m dismantling the handbrake so I can rebuild it. I have removed the nuts that fasten the driveshaft yoke to the drum but I am unable to separate the yoke from the drum. I have soaked it with pb blaster and have tried to separate it with pry bars and mallets with no luck.I was wondering if you can provide contact information so I can talk to you about it.
Put a strap under the carrier bearing. Take the 4 bolts out and drop it down some. It should give you room to help separate the 2.
I have already separated the driveshaft and it is hanging on a block. I have plenty of room to separate the yoke and drum but it appears it is frozen at the mating surface. I spoke with a local mechanic and they said they sometimes have to use an air hammer and chisel. I’m hesitant to do this for fear of damaging the transmission. A puller of some kind would be ideal but I can’t find a type specific puller and all of the universal pullers I have seen have the extraction screw in the center where as in this part the screws would need to be offset against the drum.@@Nprdoctor
Great video. This will help me a lot. Thank you for posting. You mentioned that a driver damaged the tail shaft by using the hand brake while moving. Can you use the hand brake for stopping in an emergency situation? Will this cause damage to the transmission?
It is always a good idea to inspect all components involved when using the e brake for an emergency stop. The truck was leaking fluid out of the back of the transmission, so we replaced the seal. Another couple of weeks passed and it started leaking again. We took the truck to our local transmission shop. They informed us that it was common for the tail shaft of the trans to get damaged from engaging the brake while moving. Glad this video helped!
Good stuff
Thankyou npr doctor , this has been a very good help .