God bless Randy and his power washer. The 750j started out dirty and rough, but you will make it look like a diamond in the rough when you get finished.
I really enjoy watching your channel. I started out as a backyard mechanic, went on the Nashville Auto and Diesel College. Landed a good paying job working for Daniels Con rebuilding cylinder heads to start. My work has taken me all over the world. Anytime the boys complain, tell them this story. Its so hot in Saudi Arabia its necessary to carry your wrenches around in a bucket of water, otherwise they'll burn your hand. Sand storms are common but here's the thing, the sand is the consistency of flour and it goes everywhere. It is possible to suffocate in a sandstorm. I'm an old WV stump jumper at heart, I've walked thru many concrete jungles but nothing takes the place of those country roads. Thanks for another high quality video and taking the time to share a little bit of your life with the world.
Some of the things that I like about this channel is that (most times) I learn something & that you like everything put away. By painting your dozers they look new. Because of that they get/find a new home a lot quicker. We all like to see what we buy looking good, the paint is like a seal of approval.
All depends on where you buy the equipment at. Paint is like putting lipstick on a pig. It might look nice but under it not so much. Auction companies can throw a $1k to a paint job and get $5k more because it looks good in pictures. When the machine is junk.
@@ColinLennard Yes but places like C&C fix the equipment first then paint. If you watch C&C auction video you see how messed up equipment can be, but the paint looks good.
Was anyone else disappointed that the video was only 39mins long? You do the work in the correct order partly dismantling it then cleaning and finish it off in reasonable comfort, I all too often see people working in atrocious conditions that don’t help themselves by cleaning down even a little 🏴👍🏻
If your want to get water out of fuel. get a baby sock and put the lining from a diaper in it. Leave 300% more room for expansion than filler. tie it and set it in the tank's low spot. It will suck water up and not the fuel into the liner material. you use a baby sock so you can pull it out a couple inch pipe
Clint has one of the most impressive crews I have ever seen. Uncle Randy never gets much camera time but it would not be possible for a lot of these transformations to happen without a good cleaning at the beginning. Fortunately Clint can do so much with one hand tied up with a camera or else we might not get to see so much. Another great job for the team.
Nice job gentlemen, came out looking awesome. Somebody is going to get a quality dozer. I think Kevin has been sniffing paint fumes again, he’s getting sentimentally slobbery about his short truck again! 😢😊😂😂 thanks for the update, enjoyed watching.
I started watching your videos again after a year or two off. I want to compliment you on your content and video production. The time is past when I'm likely to be working on JD450 fire control dozers but I still learn techniques that I can use. You and Kevin are a hoot and work incredibly well together. I appreciate you are working with the next generation too. How long have you and Kevin known each other?
Is that the same bulldozer? What a transformation. You are just not a heavy machinery mechanic/business owner, but a wizard when it comes to these repairs.
Addressing the issues with the Deere 750J dozer and questioning if you bought a lemon shows your dedication to problem-solving and maintaining equipment. Your proactive approach to understanding and tackling potential major problems demonstrates both your expertise and commitment. It’s inspiring to see how you handle challenges with such determination and insight. And I am Floating Village Life, Hit follow and let's explore together!
Thank you for saying merchandise. I'm not a fan of the word merch. You made my day. I love your videos. Kevin I'll never forget your laugh after the shorty burn out.
When you get 3 months behind like Mike. I'm going to tell Mrs.C you need to do better, Clint. But you're doing fine 😂. Kevin has another picoso there. With a little more practice, Kevin will make a good painter. Clint, Kevin wants more practice. 😂 That turned out amazing, and thankfully, you didn't run into another major job like that 450 reasently. Great video, Clint.
Hey Clint I've been checking on your videos the older ones and New and have been finding that TH-cam has been deleting my subscription and likes which I do every time. I just wanted to give you a heads up because I love your videos and everything you guys do there keep up the good work and I'll keep checking on your videos to make sure TH-cam is not cheating you there. I'm a long time subscribeer and fan. Warren White New Bern NC. 👍👍👍
Nice work, guys 👍 Mr Kevin once again you have created a thing of beauty 👌(although listening to you chat with Shorty Truck makes me think you've been inhaling paint fumes 😂)
I used to work on some machines, with small fasteners, I started plugging the holes with shop rags to catch that occasional dropped screw. It saved a lot of 'mumbling'....
I’d really like to know why there are steel strips of meal running either side of the pit? I’m no mechanic especially a diesel mechanic but know enough about a petrol engine! I enjoy watching your videos for the workmanship camaraderie between father & sons, plus the going into great depth as to how to fix things that are broke or operate as they should ! You sets out repairing things very marticulously! It’s a great credit to pass on to your sons all that knowledge that has taken you a lifetime to learn!
What an absolutely amazing job, just why I watch these videos, there you go Kevin, Jack of all trades master of most of them ( except flying planes 😂) fantastic paint job but hats off to Clint too for managing to work with one hand and film with the other. Thanks lads.. Great job..
Looking good from the Buck & Doe Ranch, I've worked on heavy equipment but you & the crew take it to a whole new level, thank you for the great content. 🤠
In my country we used the expression ,,zichtwerker,,😂. Used for someone who worked when the boss saw him or did the jobs that where insight. On other moments ,,drukte hij zijn snor,,(was not around). With you its the other way around😂😂.
The 750 J looks brand new, you guys always do a spectacular job from start to finish. Way to take it home Kevin.!!! Clint, A couple of suggestions: I'm sure you've heard of it, I'm pretty sure your familiar with it, how come you don't use it? I'm referring to water finding paste, easiest and quickest method to find out if there's water in a fuel tank without having a visual, takes all the guess work out of it. Also, I bought a memory foam mattress pad, cut it up in 3 pieces, had washable nylon slip covers made with Velcro fasteners and use them any time spent on my back or knees, it will last forever, you need to get one for the shop. @ 12:30 perfect for kneeling on the track cleats.
At least this one seems like a simple and fairly cheap fix... unlike that little one you just finished showing us that took what, 6 episodes and quite a bit of teardown and rebuild.
Kevin at the very end..😂😂😂😂
God bless Randy and his power washer. The 750j started out dirty and rough, but you will make it look like a diamond in the rough when you get finished.
A diamond in the rough looks like a rock,lol hopefully it comes out better than that. But we know these guys do a great job!
we need more randy cameos
Kevin absolutely does a amazing job on painting
I really enjoy watching your channel. I started out as a backyard mechanic, went on the Nashville Auto and Diesel College. Landed a good paying job working for Daniels Con rebuilding cylinder heads to start. My work has taken me all over the world. Anytime the boys complain, tell them this story. Its so hot in Saudi Arabia its necessary to carry your wrenches around in a bucket of water, otherwise they'll burn your hand. Sand storms are common but here's the thing, the sand is the consistency of flour and it goes everywhere. It is possible to suffocate in a sandstorm. I'm an old WV stump jumper at heart, I've walked thru many concrete jungles but nothing takes the place of those country roads. Thanks for another high quality video and taking the time to share a little bit of your life with the world.
"You could shut it off." LOL but the diesel drip is just too good...
You've got to love, Mason,! A shy, but hard working, dependable kid !!! Good job Mason!! I'd hire you anytime!
Yeah, but he's a bully! Kevin said so. 😉
Having Kevin is like having a cast of thousands!!! I thought he was about to say "Call BR-549 to make a deal on this tractor".
Some of the things that I like about this channel is that (most times) I learn something & that you like everything put away. By painting your dozers they look new. Because of that they get/find a new home a lot quicker. We all like to see what we buy looking good, the paint is like a seal of approval.
All depends on where you buy the equipment at. Paint is like putting lipstick on a pig. It might look nice but under it not so much. Auction companies can throw a $1k to a paint job and get $5k more because it looks good in pictures. When the machine is junk.
@@johnunsicker7440 You are right. However should these people where to adopt that attitude it will come back to bight them.
@@ColinLennard Yes but places like C&C fix the equipment first then paint. If you watch C&C auction video you see how messed up equipment can be, but the paint looks good.
@@johnunsicker7440 Point taken. However C&C know how to get that extra $$$$ which make the difference. (That is what I like about them)
Randy is a great pressure washer. I've never seen anyone get the equipment as clean as he does. Thanks for the video enjoy watching them
Best in the business east of the Mississippi River guaranteed or ur 💵 back 😂😂-Kevin
I’m not worried, it will be like brand new when you’re done. You’re that good.👍
Don't take it too bad Kevin, I'm sure you and short truck will be reunited soon.
Was anyone else disappointed that the video was only 39mins long? You do the work in the correct order partly dismantling it then cleaning and finish it off in reasonable comfort, I all too often see people working in atrocious conditions that don’t help themselves by cleaning down even a little 🏴👍🏻
Boss & Bubby show!!! When you get lemon you make lemon aid!!! Great work guys!!! Great video's...Bubby showing some leg???
Your shop would be perfect Maximum Overdrive Part 2. The machines take over
Kevin and his love affair with the shorty truck is hilarious 🤣🤣🤣🤣
Loved the video
If your want to get water out of fuel. get a baby sock and put the lining from a diaper in it. Leave 300% more room for expansion than filler. tie it and set it in the tank's low spot. It will suck water up and not the fuel into the liner material. you use a baby sock so you can pull it out a couple inch pipe
Bubby going be a movie star!!!
Good to see Mason back
All the fellows at C&C Equipment have a beautiful work ethic. That's what I admire more than the great job you do. You guys all deserve an atta-boy.
Kevin ALWAYS does an awesome job painting! 👍👍👊👊
🤣🤣Kevin’s ending with the shorty truck. 🤣🤣🤣
Kevin's part at the end is just priceless. Everybody make sure to call Jay, the greasiest or cheesiest tractor salesman in Indiana!
Clint has one of the most impressive crews I have ever seen. Uncle Randy never gets much camera time but it would not be possible for a lot of these transformations to happen without a good cleaning at the beginning. Fortunately Clint can do so much with one hand tied up with a camera or else we might not get to see so much. Another great job for the team.
No one get them cleaner-Kevin
From running crappy to running awesome. Got a bath and then a beautiful paint job!
Awesome job, guys!!! Oh, Shorty😢
Perfect timing for lunch break working entertainment.
It always amazes me how, even though those dozers are huge, everything still seems crowded and tight when you have to work on them.
I enjoy watching a good team working so well together, nice job well done.
haha, Kevins ending was a crack up !
Nice job gentlemen, came out looking awesome. Somebody is going to get a quality dozer. I think Kevin has been sniffing paint fumes again, he’s getting sentimentally slobbery about his short truck again! 😢😊😂😂 thanks for the update, enjoyed watching.
Hunter is his fathers son the future of C&C that lad is a machine 😂😂👍👍
Another beautiful example of the quality of work from the body shop
Wey Hey !! She's a Brahma in new paint 😆!!
I started watching your videos again after a year or two off. I want to compliment you on your content and video production. The time is past when I'm likely to be working on JD450 fire control dozers but I still learn techniques that I can use. You and Kevin are a hoot and work incredibly well together. I appreciate you are working with the next generation too. How long have you and Kevin known each other?
Welcome back!
8 years almost
Not a lemon - works great with a little bit of repair. Wow nice work Kevin. Shorty - stay hidden - gotta love a good burn out too.
That dozer sounds like I do after I eat refried beans. Kevin ain't right, and I'm okay with that. Lol.
Your finish paint jobs are top notch. That thing looks brand spanking new again!! Impressive.
Kevin, in the outro? Loved it. hahaha
Nice paint job Kevin, Shorty Truck still has a gleam of hope to be put back on the road.
Is that the same bulldozer? What a transformation. You are just not a heavy machinery mechanic/business owner, but a wizard when it comes to these repairs.
Another cracking dozer with that special Kevin paint job. Bravo guys keep em coming !
Sounds On song and healthy now !! Great job Guys !!
Cool beans! 😊
Randy Excellent Wash Job
Clinton Kevin Randy Tucker great video! Thanks for sharing! Kevin
Addressing the issues with the Deere 750J dozer and questioning if you bought a lemon shows your dedication to problem-solving and maintaining equipment. Your proactive approach to understanding and tackling potential major problems demonstrates both your expertise and commitment. It’s inspiring to see how you handle challenges with such determination and insight. And I am Floating Village Life, Hit follow and let's explore together!
Mason knows a great hat to wear and mine is a most beautiful hat in my collection because the colors of America shine bright 👍😎🇺🇸 NY
Thank you for saying merchandise. I'm not a fan of the word merch. You made my day. I love your videos. Kevin I'll never forget your laugh after the shorty burn out.
I wish I could have got with guys like this years ago you could have learned a life time of knowledge
I believe Jay is the new Superstar of C&C equipment.
All nice and shiny new, ready to get dirty.
Kevin closes the show, that’s dangerous Mr. C😂😂😂 Great job guys 🤗🇺🇸
You only get one first impression. So painting it and adding new decals. With a fresh oil, lube, and cooling system service 🙌💥
When you get 3 months behind like Mike. I'm going to tell Mrs.C you need to do better, Clint. But you're doing fine 😂. Kevin has another picoso there. With a little more practice, Kevin will make a good painter. Clint, Kevin wants more practice. 😂 That turned out amazing, and thankfully, you didn't run into another major job like that 450 reasently. Great video, Clint.
Hey Clint I've been checking on your videos the older ones and New and have been finding that TH-cam has been deleting my subscription and likes which I do every time. I just wanted to give you a heads up because I love your videos and everything you guys do there keep up the good work and I'll keep checking on your videos to make sure TH-cam is not cheating you there.
I'm a long time subscribeer and fan.
Warren White
New Bern NC. 👍👍👍
DP has the market on the history channel!!
That's a mint paintjob! Greetings from the Netherlands
MBTS taking over one channel then Kevin & J moving in on this one!! Hahaha gotta love it! Well done boys!
Randy is such an asset,hats off my man 😎🇺🇸🇨🇱
Great video guys it had a great start then middle and ending. Is Kevin up for an Oscar for his dramatic finish. Safe travels. Ken.
🤣🤣
Sounds a lot better now you've taken the water out and given it a little bit of additive. It's going to be a lovely dozer for someone. 👍
you got the best working on it so easy fix. DO YOU REMEMBER how you took that out? YEA slowly....fine paint job
Nice work, guys 👍
Mr Kevin once again you have created a thing of beauty 👌(although listening to you chat with Shorty Truck makes me think you've been inhaling paint fumes 😂)
🤣🤣🤣
Nice one again Kevin 👍😎🇺🇸 NY
Beautiful machine ❤ live these videos and teach the boys they're going to be famous and good professional heavy equipment techs!💯✌🏼
I used to work on some machines, with small fasteners, I started plugging the holes with shop rags to catch that occasional dropped screw. It saved a lot of 'mumbling'....
That’s a beautiful blue sky 😊
Thanks for sharing another great video, always enjoyable, interesting, informative and entertaining.
Keep them coming.
Mason and Randy do all the real work.
hat 750J looks sweet all cleaned up, repaired and painted! SWEET!!
your boy's are doing so good. good job dad
Hi C& C Equipment & it's is Randy and i like yours video is Cool & Thanks C & C Equipment & Friends Randy
🫡🤪
Mason seems like he is a hard worker. Hopefully he will start talking more on camera
I’d really like to know why there are steel strips of meal running either side of the pit?
I’m no mechanic especially a diesel mechanic but know enough about a petrol engine!
I enjoy watching your videos for the workmanship camaraderie between father & sons, plus the going into great depth as to how to fix things that are broke or operate as they should ! You sets out repairing things very marticulously! It’s a great credit to pass on to your sons all that knowledge that has taken you a lifetime to learn!
So the tracks don’t tear up the concrete
What an absolutely amazing job, just why I watch these videos, there you go Kevin, Jack of all trades master of most of them ( except flying planes 😂) fantastic paint job but hats off to Clint too for managing to work with one hand and film with the other. Thanks lads.. Great job..
That plane wreck is still under investigation as the cause... my attorney says that I was setup!😂-Kevin
Sure does look spiffy….nice job wildpoultryguy!
You guys do killer paint work😊
that dam kevin is one hell of a caritor . he is so darn funny !!!
Thanks for sharing your thoughts, ideas and videos. That sure was a dirty girl, glad she cleaned up nice. Wishing you and your family the best.
Beautiful Paint Job!!!
Kevin you're a nut!!!! Awesome
That Kevin is a hoot. I love watching this channel one of the best.
Looking good from the Buck & Doe Ranch, I've worked on heavy equipment but you & the crew take it to a whole new level, thank you for the great content. 🤠
The man certainly can lay some paint. And he is funny. I am retired but I would work there for free...
Thank you for sharing, another great project 👍👍👍👍
You know the drill ! Clint the best channel on TH-cam hands down Boston wise guy 🇱🇷🇮🇪🦉 have donut 👍👍👍👍👍👍👍👍👍👍👍 🍩🍩🍩🍩🍩🍩🍩🍩🍩🍩🍩
That is one great looking dozer.
I think Kevin should get the recognition that’s he’s due and I propose we start calling him “Special K”
In my country we used the expression ,,zichtwerker,,😂. Used for someone who worked when the boss saw him or did the jobs that where insight. On other moments ,,drukte hij zijn snor,,(was not around). With you its the other way around😂😂.
🤣🤣
The dozer got repaired and serviced....Then painted....Its looking awesome....Stay safe and see you soon
Great job on the dozer it looks fantastic
Great Outro, Kevin, thanks. 😊
Our implement dealers frown on filling the fuel filters ahead of time because it doesn't get filtered then.
I hope Shorty rides again soon. That was funny at the end.
You guys could be the “Wood Bros” of the Dozer 500!
Ok, what a short video. Thanks, Kevin. Catchbyou next time
Damn good paint job best part of a Deere lol
The 750 J looks brand new, you guys always do a spectacular job from start to finish. Way to take it home Kevin.!!!
Clint, A couple of suggestions: I'm sure you've heard of it, I'm pretty sure your familiar with it, how come you don't use it?
I'm referring to water finding paste, easiest and quickest method to find out if there's water in a fuel tank without having a visual, takes all the guess work out of it.
Also, I bought a memory foam mattress pad, cut it up in 3 pieces, had washable nylon slip covers made with Velcro fasteners and use them any time spent on my back or knees, it will last forever, you need to get one for the shop. @ 12:30 perfect for kneeling on the track cleats.
Clinton - Kevin needs some serious help! I think his loose screws have all fallen out??!! :) Great video - as always! Thumbs up! Stay safe. Jim
At least this one seems like a simple and fairly cheap fix... unlike that little one you just finished showing us that took what, 6 episodes and quite a bit of teardown and rebuild.
Welcome to the Dozer Clinic™️! Doctor Clint is very happy to see you! 😁🤘