You already got your thousand dollars' worth just in what we saw in the video. Give it a good going over for oil, filters, grease, etc. and you will enjoy many miles of happy motoring!
that was a great deal, even if you had to put different rims and tyre on it, 18 psi pressure in rears to save front axle with a loader always have a counter weight on the back end/ linkage. Tip When greasing the front axle pivert take the weight off the axle so the grease can get to the top of the pin
You should be able to set your 3 point hitch to float which allows it to follow the contour of the ground while Bush hogging. That guy gave you that tractor. Congrats
Mike when you said the pavers were out of Corydon it brings back old memories for me back in the mid 70s I used to drive for Ace hardware and my route ran from Toledo Ohio first stop Greenville Terre Haute Linton West Baden springs French lick Jasper Corydon last stop New Albany, every week for a year the greatest people in the little towns in southern Indiana!
Dude! Bargain of the century! I looked for two years for a tractor that exact size and could not score one for less than $12K. Ended up buying one a little bigger than what I had hoped for $6,400.00 and I had to go to fetch it from Texas (and I had to reseal the loader cylinders, and still have to fix the loose steering and lack of brakes). Cheers from east-central AZ.
It's so, cute watching a man put something together, as I have never seen a man stop and read the instructions, men seem to be straight forward thinkers and most men like Dave, are so mechanically inclined that it's a pleasure watching them repair a piece of equipment!
New subscriber here, just saw the video. Next time you mount your tires be sure that you mount the valve side LAST. You started at the valve and the outer tire can rip the valve clean off this way. When you start at the opposite end, outer tire can drop in the rim groove no problem (no valve in the way) and you mount it a lot easier. Hello from Croatia!
Hell of a deal...I had a Kubota 2550 it was a great working machine ... you're machine has a after market loader..if it had Kubota front end loader you're loading capacity would double
my tractor tires also have tubes, thats how i got it. one of them has a short split in the sidewall which i filled with silicon to keep crap out. but it works.
Great deal on the tractor!!! I was like, why in the HELL is he trying to drive the tractor off the trailer with a completely destroyed rear tire...lol. So glad you decided to change it on the trailer....
Congratulations on your tractor buy that's a steal bush hog worth near half. Looks like everything worked good mowes good 👍 . If you have one tire loaded and other one not that's not good one tractor or operator it'll pull stronger on loaded side. Thanks for sharing be safe have fun enjoy your tractor
First order of business remove the wheel check tire and rim for sharp object that pops the tire repair the tire problem mount the wheel and you just saved buying a tire in the event it gets damaged driving off flat good score on the tractor and brush hog
For those that are looking for wheels to fit older tractors, Wenger Systems in New Holland Pa can make wheels to fit. He's done a few sets for me, and they always look nice.
Nice tractor. You gotta work smarter not harder bud. Do some research before just jumping into stuff. Makes stuff a whole lot easier. Anywhoo! Looks like a great deal. 4x4 , front loader, brush hog. All for 1,000 bucks. Wish I could find a deal like that.
Wow that is a deal of a lifetime. I am never lucky enough to stumble across deals like that. $1000 i would have bought that thing in a heartbeat. I could use it at my property to brush hog and move wood haha
You ought to be really proud of yourself ripping off the guy for not knowing what the value of what he was selling that's why I don't like doing business with private individuals I go through an Auctioneer it's his job to turn around and get the best price
Dave, might be a good idea to get that over to Andrew's shop and you two guys do a good service on that thing! Andrew is the service expert. Great buy!
@@Dumpster_Dave I am sure some groveling, negotiating and begging will be involved. It would be a great episode for Andrew and you and Sam! Use the Sam helping do it angle, that should work for sure!
It's not water it's calcium chloride they fill it up with calcium fluoride so it doesn't freeze and Fire you turn around and just start a pollution program
Watching you struggle with installing the tire...could help from thinking, that would've been a great opportunity to use the other tire changing tool...
USE YOUR GLOW PLUGS,,,,,,,,it will start much easier. Those Mitsubishi tractors have precombustion chambers with glow plugs. You should be able to rotate your key back to like a aux position to turn the glow plus on, on the dash there should be an indicator under a chrome cover, pigtail coil of sorts to show you when the glow plug is hot. Summer time you should be fine heating for about 20 seconds,, Winter 30-45 seconds, they are not the "newer" rapid glow plugs in your tractor.
Look on u tube there a company that make storage building 3people can put it up for the tractor and any other supplies those diesel have glow plugs on the switch to warm to start as they don't like Cold temperature
Well, you were on the right path It may be flat from a screw nail. I always used a rag instead of my fingers to check the inside of the tire! Otherwise, when inflated it will puncture the new tube. You said "I don't know" is right! You made a lot of mistakes. "Keystone cops fixing a flat.
You had me feeling sorry for you struggling with that tire trying to slide it up to the tractor hub.. Next time use a bar to work it in.. The reason you lost the vale stem when you were mounting the tire, you should not have started to mount the tire there.. The bead needs to go down on the rim to give you room to work it all the way on the rim.. The bead could not go down with the valve stem there so it pulled it out.. Good thing you did not ruin the tube.. Good luck with your new tractor..
Watching Rural King selling fluid filled tires on there new tractors are filled with beet juice because it won’t rust out the rims like calcium chloride.
@@Dumpster_Dave you'd need to add antifreeze, that is what they do here in the UK, or use to do I should say, It's been a long time since I last did a farm tractors tyres. But I am assuming the water you got out of the tyre was inside the tube ???, if so it would have had some kind of antifreeze in it too
Check the gear oil in the gearbox on the brush cutter before you run it too much. If it's been sitting outside it probably has water in it. Great deal Dave. That's at least a $7500 tractor here in the Midwest.
@@Dumpster_Dave if you ever have to do it again use the tyre lever on the bottom of the wheel to put it back on the tractor it will save breaking your back
Hey Dave nice job on the tire I check what the tire says there suppose to be a lil squishy next why didn't you check your fluids before putting it t to work ( oil trans hydraulic radiator
you should stick to what you know....................... the calcium is added for weight...... farmer use it all the time on tractor tires should have called a tire repair shop that deals in heavy duty tires
Id kill for a 1000 dollar tractor like this lol
Good chatting with you tonight, glad you got my old workhorse, take care.
You already got your thousand dollars' worth just in what we saw in the video. Give it a good going over for oil, filters, grease, etc. and you will enjoy many miles of happy motoring!
that was a great deal, even if you had to put different rims and tyre on it, 18 psi pressure in rears to save front axle with a loader always have a counter weight on the back end/ linkage. Tip When greasing the front axle pivert take the weight off the axle so the grease can get to the top of the pin
You should be able to set your 3 point hitch to float which allows it to follow the contour of the ground while Bush hogging.
That guy gave you that tractor. Congrats
props to you for showing the struggle i can appreciate this
Vice grips holds the bead while you prying the tire on.
Saw you working with Andrew kind of like your show so I've subscribed. Looking forward to watching your videos.
Mike when you said the pavers were out of Corydon it brings back old memories for me back in the mid 70s I used to drive for Ace hardware and my route ran from Toledo Ohio first stop Greenville Terre Haute Linton West Baden springs French lick Jasper Corydon last stop New Albany, every week for a year the greatest people in the little towns in southern Indiana!
Dude! Bargain of the century! I looked for two years for a tractor that exact size and could not score one for less than $12K. Ended up buying one a little bigger than what I had hoped for $6,400.00 and I had to go to fetch it from Texas (and I had to reseal the loader cylinders, and still have to fix the loose steering and lack of brakes). Cheers from east-central AZ.
I was in the right place at the right time
It's so, cute watching a man put something together, as I have never seen a man stop and read the instructions, men seem to be straight forward thinkers and most men like Dave, are so mechanically inclined that it's a pleasure watching them repair a piece of equipment!
New subscriber here, just saw the video. Next time you mount your tires be sure that you mount the valve side LAST. You started at the valve and the outer tire can rip the valve clean off this way. When you start at the opposite end, outer tire can drop in the rim groove no problem (no valve in the way) and you mount it a lot easier.
Hello from Croatia!
Thanks for the info. I’ll have to try that next time
Looks like a great deal. That is a good sized tractor too.
Big WIN - Being in the Right Spot at the Right Time. You should buy a Lottery Ticket now...
If only I was that lucky to get a deal like that. Wow, $1,000.00. Congrats. Thanks for the video.
Congrats on a great deal!
Hi Dave, I admire your patience and persistence. I would have phoned Andrew Camarata for help. Best wishes, John
That was a early Christmas present nice old tractor the bush hog is worth that much great deal
I done tires on multiple tractors. Never had an issue using the one plastic nut with the tube and a little tube touching rim.
Lil tip when trying to get the bead around rim. Pour gas on the bead. It’ll make it softer and more slippery
Killer deal! All for a $60 tire tube and elbow grease
You made it harder then it had to be, for a simple tire repair. 🤔🤣
I'm yelling at the screen, "grab the damn impact...lol"
When installing a new tube you should put a little air in it, that'll keep it from getting twisted up.
That's exactly right because it stops tube stem falling out of the rim
Nothing is more entertaining that it is to watch anybody struggle unnecessarily ..from lack of mechanical knowledge 😂😂
Hell of a deal...I had a Kubota 2550 it was a great working machine ... you're machine has a after market loader..if it had Kubota front end loader you're loading capacity would double
my tractor tires also have tubes, thats how i got it. one of them has a short split in the sidewall which i filled with silicon to keep crap out. but it works.
Great deal on the tractor!!! I was like, why in the HELL is he trying to drive the tractor off the trailer with a completely destroyed rear tire...lol. So glad you decided to change it on the trailer....
Congratulations on your tractor buy that's a steal bush hog worth near half. Looks like everything worked good mowes good 👍 . If you have one tire loaded and other one not that's not good one tractor or operator it'll pull stronger on loaded side. Thanks for sharing be safe have fun enjoy your tractor
Thanks 👍
I lOVE your tire machine!!!!!!!
o mannoman, very heavy working, good luck for you...
Well worth $1000. He scored man
First order of business remove the wheel check tire and rim for sharp object that pops the tire
repair the tire problem mount the wheel and you just saved buying a tire in the event it gets damaged driving off flat
good score on the tractor and brush hog
0:40 that’s what kids do! They always do the opposite when the parent wants to brag about those things they do! 😅😅😅😅❤
Wow!! Awesome deal!!
11:00 You should have gone to Andrew’s and asked him if you could use his machine. AC got it going on!!!❤
Yeah he’s got some tools at his place
For those that are looking for wheels to fit older tractors, Wenger Systems in New Holland Pa can make wheels to fit. He's done a few sets for me, and they always look nice.
Nice to know thanks
That was awesome hoo yes in the right place at the right time for shore.
That was a steal. Just saw one like it on marketplace pretty cheap last fall.
Yeah definitely
Great deal on that tractor !!
Someone above is smiling and knowing she’ll be well used.
right place at the right time ,great deal
let's take it to the tire machine, and then the truck was it 😂🤣 dude you are hilarious.
Freakin SCORE!!!!!!!!!!!!!!!!!!!!! Damn what a great deal!! U sure lucked up my guy
I yeah
Nice tractor. You gotta work smarter not harder bud. Do some research before just jumping into stuff. Makes stuff a whole lot easier. Anywhoo! Looks like a great deal. 4x4 , front loader, brush hog. All for 1,000 bucks. Wish I could find a deal like that.
Wow that is a deal of a lifetime. I am never lucky enough to stumble across deals like that. $1000 i would have bought that thing in a heartbeat. I could use it at my property to brush hog and move wood haha
Very good buy!!!
That was a great buy.
Awesome find . Dave I like it .
Thanks
You ought to be really proud of yourself ripping off the guy for not knowing what the value of what he was selling that's why I don't like doing business with private individuals I go through an Auctioneer it's his job to turn around and get the best price
Show your integrity really good
Dave, might be a good idea to get that over to Andrew's shop and you two guys do a good service on that thing! Andrew is the service expert. Great buy!
I can ask but he’s a busy guy.
I was going to suggest a good servicing as well. Change all your fluids, etc. You have a diamond in the rough there.
@@Dumpster_Dave I am sure some groveling, negotiating and begging will be involved. It would be a great episode for Andrew and you and Sam! Use the Sam helping do it angle, that should work for sure!
It's not water it's calcium chloride they fill it up with calcium fluoride so it doesn't freeze and Fire you turn around and just start a pollution program
@@roberta4989 she dropped him and they aren't together anymore
Awesome deal 👌
Good idea to remove the weight in the your tire or add to one you fixed good way to broke a axle great deal
Yeah I really don’t need the weight in the rear, just using it for brush hogging
Lucky man,,,,good purchase
Thanks
What a deal. That’s awesome
International tractors were always built stronger than the others. With some care that thing should run forever and do a good day's work.
You’re right but this tractor was made by Mitsubishi.
Should have max PSI listed on sidewall of tire.
10:26 Dave opening box like a complete savage
Yeah and left for wind to blow into somebody's yard!
For one what is he trying to do, I thought he was going change a tire not make love to it
I would say you definitely got your money's worth plus for that tractor
O yeah great deal
Great deal Dave
Thanks
@@Dumpster_Dave what areas do you cover?
You're going to have trouble if you don't clean that room off on the inside it's going to rip up that tube.
big jope vore 1 wiel hope dhat every ting going whel gr from the nederlands
Watching you struggle with installing the tire...could help from thinking, that would've been a great opportunity to use the other tire changing tool...
Great video Dave, you for sure scored big on that one! Would love to see more videos/a service on that thing! Greetings from Norway!
Will do
@@Dumpster_Dave lucky my kubota dealer still carryies tires and rim for that old case ih for $300
Nice find ! You stole that tractor and brush hog !
You got that right he stole it without any conscience
Heck of a deal
I picked up a international harvester 454 with brush hog and box blade for 2700 last spring!
Good deal
Enjoyed the video
Thanks. It’s still running strong
Good buy Dave but after 5 years I would think a full service is in order.. and fuel?
Awesomeness 👌
USE YOUR GLOW PLUGS,,,,,,,,it will start much easier. Those Mitsubishi tractors have precombustion chambers with glow plugs. You should be able to rotate your key back to like a aux position to turn the glow plus on, on the dash there should be an indicator under a chrome cover, pigtail coil of sorts to show you when the glow plug is hot. Summer time you should be fine heating for about 20 seconds,, Winter 30-45 seconds, they are not the "newer" rapid glow plugs in your tractor.
Look on u tube there a company that make storage building 3people can put it up for the tractor and any other supplies those diesel have glow plugs on the switch to warm to start as they don't like
Cold temperature
Well, you were on the right path It may be flat from a screw nail. I always used a rag instead of my fingers to check the inside of the tire! Otherwise, when inflated it will puncture the new tube. You said "I don't know" is right! You made a lot of mistakes. "Keystone
cops fixing a flat.
Lol
You had me feeling sorry for you struggling with that tire trying to slide it up to the tractor hub.. Next time use a bar to work it in.. The reason you lost the vale stem when you were mounting the tire, you should not have started to mount the tire there.. The bead needs to go down on the rim to give you room to work it all the way on the rim.. The bead could not go down with the valve stem there so it pulled it out.. Good thing you did not ruin the tube.. Good luck with your new tractor..
Thanks
Best grand spent ever
I just saw this video 😳buddy YOU SCORED !!
Definitely did
Watching Rural King selling fluid filled tires on there new tractors are filled with beet juice because it won’t rust out the rims like calcium chloride.
Some tractors tyres have water in the tyres to help with balance/counter balance
We live in the northeast, if it was water, it would freeze
@@Dumpster_Dave you'd need to add antifreeze, that is what they do here in the UK, or use to do I should say, It's been a long time since I last did a farm tractors tyres. But I am assuming the water you got out of the tyre was inside the tube ???, if so it would have had some kind of antifreeze in it too
nice buy
You can look on the side of the tire to see how much air should be in it
$1,000 bucks….it’s a keeper.
That's a score
quick thing dont stand over the bar it can turn to a very shitty day if the bead pushes it up
Check the gear oil in the gearbox on the brush cutter before you run it too much. If it's been sitting outside it probably has water in it. Great deal Dave. That's at least a $7500 tractor here in the Midwest.
Thank
@@Dumpster_Dave if you ever have to do it again use the tyre lever on the bottom of the wheel to put it back on the tractor it will save breaking your back
nice score
Put some soap on the tire edge it will go easier!
$1000 and it runs? score!!!
Great buy on tractor loader but the shreader is junk and needs work.
sweet !! tune up, sell, get a bigger one
Hey Dave nice job on the tire I check what the tire says there suppose to be a lil squishy next why didn't you check your fluids before putting it t to work ( oil trans hydraulic radiator
I did check but I will be making another video with doing the service and brush hogging
Oh
Even $10,000 would still have been a good deal, considering the price of machinery right now.
Picture on the side of the box 🇬🇧🇬🇧👍👍
1000 bucks they couldn't take my money fast enough!
Yeah it was a great deal
You got a deal.
You should inflate the tube a little then it will go in a little easier!
That seller sure undervalues his stuff you stole that one but his loss your gain better ask him got any more stuff he cant deal with lol.
HEY DAVE !! CALL ANDREW FOR HELP!!! HE CAN NAIL THAT IN A HEARTBEAT 🤣🤣🤣
Score!
probably need to sharpen the blades or get new ones on the brush hog
Hell the brush hog and loader are worth a thousand bucks
O yeah
you should stick to what you know....................... the calcium is added for weight...... farmer use it all the time on tractor tires should have called a tire repair shop that deals in heavy duty tires