UART = Universal Asynchronous Receiver/Transmitter. Sorry, I couldn't resist. 😬 Thanks for the tutorial, Joshua! 😊 Stay safe there with your family! 🖖😊
Thanks for your OSD layout. I have gone from nothing to everything and will take yours for a starting point for this build. Feels better thought out than my random layouts.
Watched all parts till 5 and after 18:20 my head blow up just too much to handle and make me a question if worth starting all this and BRO they are 9 more videos is that the simplest way to build you said will try to give :D OMG Anyway , thank you for your effort !
Hot glue injected antennas....since doing this I get the same range, but can knock the hell out of them over and over and over again without needing to replace anymore :)
New Guy Note: if you try and bind the O3 Air Unit while powering it via the USB C port, the O3 Air Unit will not go into binding mode. If you try and bind the O3 Air Unit while powering it through the power input from the Flight Controller/ESC, the O3 Air Unit WILL go into binding mode and bind quickly to the goggles.
I bought this kit. My review: We need a camera mount adapter for that frame that removes the prop view and jello effect. If this build is really geared towards beginners, it makes sense to enable it to fly without a GoPro.
It can fly without a GoPro. It will have props in view and not be able to use DJI EIS. If those are essential features, this kit may not be for you. But for a lot of people they're not essential.
This series is amazing. Would you consider doing an additional video for the video setup but using a fixed wing FC? I know its not your gig but you have the knowledge
thx for all the effort and work to do three different vtx thingies after another 😂 … this makes me want to get back into FPV since my drones sadly are rotting in the basement for years 🥲🫣 when i kinda stopped trying to get them to fly there wasnt even anything existant from DJI for freestyle fpv drones 😂 it was the fatshark HD3 time.. ^^
As always, fantastic video! This may have been mentioned in the comments below, but I did notice on another FC (Tmotor 20x20) that the "HD" plug was reversed as to what the DJI 03 pinout was. Thankfully I noticed this and had to manually switch all the little connectors.
I was going to ask you if the 03 air unit will work with Goggles 3. I looked at Get FPV and under their Goggles 3 is a note that Goggles 3 are backwards compatible with 03 air unit as long as you get the latest firmware. Yea! Thank you for the great videos, instructions and advise. It helps to watch through the video before working the drone. I had not taped down my motor wires so it was much easier to run the camera wire under the stack without removing any arms.
I need help Mr. Bardwell. I cant get my osd to show voltage in dji goggles v2. Though betaflight reads my voltage just fine. Im sure youre very busy, is there any chance you could connect me with someone who can help; if you are too busy? Thank you so much for the work you do!
Ive tried flashing the esc, the caddx vista air unit lite, and the goggles v2. Ive tried messing with the setting in the goggles, in betaflight. I messed around with the uarts and that helped other people but did not change anything for me. Though i dont understand uarts very well. Sorry.
2:00 Dji o3 airunit has a fragile body. when dropped, the part with which you attach it to the video is pressed in and hits right on the processor, which cracks and fails. now most users turn the DJI o3 airunit upside down. then the main problem goes away.
Hello Sir. Thank you for all the help. Why am I not seeing that particular "03" preset in betaflight 10.9.0? I am connected to the internet. What am I missing?
In the hope that someone sees this comment, I am using these videos to help me set up my first build. However, I have the DJI Goggles v1 with a Vista running WTFOS. Do I need to do that extra step with the CLI commands about the canvas width and height on that VTx, or is that specific to the O3 setup? Thanks!
Undecided whether to go with walksnail or dji o3. The whole reason I wanted to build a drone is because of the upcoming possible dji ban. I wonder if I use my dji fpv goggles v2 I already own will I have to use all the dji software on the phone like I have to do with my dji fpv?
I bought the kit with the 03 setup and controller 2 I did exactly what you did in this video, and you said you could go fly and no matter what buttons I push on the controller it does not arm it. Am I missing something
Is there a Stl file for the antenna mounts ? I ordered the frame separately. Would be great 😁 love the videos jb ! Finished my quad yesterday 😍 just wondering how to align the battery cable. When it’s sideways it seems to be in the way sometimes 🤔 it’s my first fpv quad tho. So I never had a quad with more then 1s 😅
first of all thanks for all of the videos I owe a great deal of my knowledge of drones mostly to you! secondly, I ran into a problem in this video. everything was going to plan until I tried to activate the 03 air unit, it wont even show up in the dji assistant 2 app (consumer series), but it does show up on my pc as external storage. I tried different usb-c cables, i tried it with a battery plugged in, I even tried the "FPV series" app. any idea on what to do? thanks again!
Great video in great series now I understand more about live video transmission on a quadcopter. And I hate to ask you but is it possible to mount a camera and transmitter board on any drone powered up and have fpv??? The reason I ask is because I have so much latency with my current drone that I can't fly fpv.
what did i buy the wrong kit? my air unit harness has the 6 pin 1mm plug on one side and some weird one with extra unused pins on the other side. i had to cut and solder an old harness end on it to make it useable.
1:15 i mean to be fair, if the rest of the industry agreed on connection order standards, Analog, walksnail or hdzero etc could all have a shared plug as well, no?
What’s going on sir, just finished building my 7” Rekon. I ran into an issue tho. My motors will not go the direction I wants them to on Beta flight. I’ve even tried using the wizard, and manually tried to change it. When I tap on the motor that I need to change direction, it just pauses for a sec and continues rotating, just not the direction I need it to. I just watch your entire season on understanding beta flight. Any advice for me. And by the way great work on explaining FPV to people like me. Your the Mr. Wonderful on Shark Tank for FPV lol.
Thanks for the video. I'm having some issues, as im using crossfire, and for this flight controller both crossfire and DJI use the same UART (UART3), so when I load the preset I lose crossfire control. Can I use a separate UART for Crossfire so that I can have both working? Thanks
I have the goggles V2 and when i go to device, i do not have any options to switch to. I have updated the firmware on the DJI assistant 2 (DJI FPV Series) and the DJI assistant 2 (consumer drone series) says "no flight logs" when connected. Any help?
will the wiring on dji 03 vtx plugging in to a speedy bee v3 f7 FC with a crossfire receiver burn out the vtx ? since i heard 03 has a built in receiver
you mention that you printed these antenna mounts (7:18) wondering if there is a place i can download the stl and likewise print them myself, would love to have it in my prefered color scheme, buy i can only find the part available for purchase. more than happy to purchase the stl.
thank you kindly for the rapid response good sir! appreciate all you do for the community. this album appears to be for the v1 QAV-S frame. i will try and do some tinkering and get'er done.@@JoshuaBardwell
Do you know why my drone keeps failsafeing when i am 10 meters away from the drone? I have tried to fix it like 3 months but i cant fix it please help me.
Hi Joshua, how are you! Your videos helped me a lot, but now I bought the Integra goggles and I can't find the configuration option as in the V2 goggles where I can define the camera transmission power, both o3 and caddx. in the bone integra is not possible??
I bought kit with dji controller but there is no video how to set up that? Only this beta... it's not clear do i need to solder something for dji controller?
Did you ever figure out what to do? I am stuck with this as well. I feel i have done everything correctly. My goggles have the 03 units pic displayed, but I get nothing from my DJI 3 controller.
@@gsrsin hey, did you figure that out? i bought this kit and i bought dji goggles 2. im also planning on buying dji rc 2 but i dont understand how to bind it all together. i saw a video that with the o3 air unit you dont need any other receiver to fly the drone, do you know how does that work?
@@mateuszsidorowicz3247I did, but I have the goggles 3 and controller 3. I have now way to remember all I did, but I know that I had to change my transmit port (uart 1) and I had to change a setting in my goggles to Sbus fast.
@@gsrsin ok, i got deeper into that and now i think i am not going to buy the dji rc 2 and instead i will buy tbs tango 2 pro. it should work with ELRS so i will use the ELRS receiver and dji o3 air unit, so i will fly the traditional way. anyways thank you for your help.
@mateuszsidorowicz3247 no worries. If it helps, the DJI stuff is nice, though. You even get the warning colors (orange and red lines at the bottom of your screen) when you are starting to get too far. This already saved me a few times. I will tell you that you should watch his build videos multiple times before you begin. He kind of mixes shit up, so you can start doing the wrong thing if you don't have the equipment he is working on. A lot of steps can be removed with the 03 air unit, making things simpler. I have my own rates, too. I feel that is important. No doubt he likes his rates as well as others, whereas I think everyone should be using mine. Haha. A lot of personal preferences in this world!
I am not sure what JB is using, but I am using the updated Dji goggle 2/Integra "Soft" foam. It made my goggles 2 fit as good as my Original V1/V2 goggles. I was running the Pyrodrone Comfy foam on my goggles 2 before the Dji foam, and it was really good too. Worst: Stock goggles 2 foam. Better: Pyrodrone Comfy Foam for Goggles 2. Best: Dji soft foam plate for goggles 2.
@@JoshuaBardwell I was hoping to delay getting the controller, but if I wan't to get out of noob mode, time to pull out the CC again. Glad you put out this series. The Avata was my in to FPV, and had no clue how to go about building my own.
FYI There is an issue with 10v BEC on the stax V2 flight controller. My video cut out during a hard landing and I traced the issue to the flight controller BEC having 0v and no longer powering the DJI o3 air unit. I emailed support and they wrote that apparently they are discovering that the BEC on the controller cannot handle the power needs of the o3 air unit. They suggested that i run power directly from VBat. If anyone is having issues, I hope that this helps.
The menus change depending what mode your goggles are in. At this timestamp in the video, I was in the DJI FPV System mode, switching to the O3 mode. th-cam.com/video/kinmxuOnoUM/w-d-xo.html&si=nYJpg1Pj-ynobsbs If you were already in O3 mode, or if you were in Avata Mode or DJI FPV Drone Mode, the menu would look different.
I NEED HELP. Theres no voltage osd in my dji v2 goggles, but it shows voltage correctly in betaflight. I have treid everything. I need the voltage.Please help me guys.
@@1RemotePilot Did he mention anything about streaming today?.. I thought Blunty mentioned he was going to be back the 27th, but he probably just meant that was when he was coming back home.
@@mikebergman1817 I'm not sure my fellow pilots. JB is a legend in my book, though. Let him live some offline lol. In all seriousness, I needed this refresher, sadly though, I had an abrupt disconnect today maybe 100 feet from my location, and have yet to set up GPS RTH, so my Grinderino got a lesson in physics today, instead of defying them all. I run DJI 03 AU, for VX/TX/RX. Coming from DJI FPV, Avata, and Air 2s. Previously built an Align M690L, but never had faith in it in the air. Went to DJI for work, but custom quadz for race and fun. JB, if somehow someway you read this, Betaflight 4.4 us all into binding DJI and GPS M10Q! We may not be worthy, but we sure try, your excellency!!
Buy the DIY build kit at:
* Analog video version - bit.ly/3QtWKOd
* Digital HD video version - bit.ly/45AUklt
UART = Universal Asynchronous Receiver/Transmitter. Sorry, I couldn't resist. 😬
Thanks for the tutorial, Joshua! 😊
Stay safe there with your family! 🖖😊
Thx 🤣😂 i never heard the real name before 👍🏻😂
Note v2 goggles it's a double button press for it to start the binding... Great series Joshua
Thanks for your OSD layout. I have gone from nothing to everything and will take yours for a starting point for this build. Feels better thought out than my random layouts.
Watched all parts till 5 and after 18:20 my head blow up just too much to handle and make me a question if worth starting all this and BRO they are 9 more videos is that the simplest way to build you said will try to give :D OMG
Anyway , thank you for your effort !
Hot glue injected antennas....since doing this I get the same range, but can knock the hell out of them over and over and over again without needing to replace anymore :)
New Guy Note:
if you try and bind the O3 Air Unit while powering it via the USB C port, the O3 Air Unit will not go into binding mode. If you try and bind the O3 Air Unit while powering it through the power input from the Flight Controller/ESC, the O3 Air Unit WILL go into binding mode and bind quickly to the goggles.
I bought this kit. My review: We need a camera mount adapter for that frame that removes the prop view and jello effect. If this build is really geared towards beginners, it makes sense to enable it to fly without a GoPro.
It can fly without a GoPro. It will have props in view and not be able to use DJI EIS. If those are essential features, this kit may not be for you. But for a lot of people they're not essential.
Does the jello effect happen in the live video in the googles or just in the recorded video?
The recorded videos. But just not all the time, mainly during prop wash.@@nathanlane6490
This series is amazing.
Would you consider doing an additional video for the video setup but using a fixed wing FC? I know its not your gig but you have the knowledge
The setup of the O3 would be exactly the same for a fixed wing FC, wouldn't it? I'm not sure what would differ.
Top Thanks God Day from Corsica 🤜🤛🤞💥
thx for all the effort and work to do three different vtx thingies after another 😂 … this makes me want to get back into FPV since my drones sadly are rotting in the basement for years 🥲🫣 when i kinda stopped trying to get them to fly there wasnt even anything existant from DJI for freestyle fpv drones 😂 it was the fatshark HD3 time.. ^^
You can tell this guy is a real pro - the way he planned out that camera to vtx cable routing in advance!!! Bravo Bravo Bravossimo!!!!
If you need a tutorial for how to install and set up BF Configurator - th-cam.com/video/LkBWRiEGKTI/w-d-xo.html
Thank you for your help!!!! So amazing
As always, fantastic video! This may have been mentioned in the comments below, but I did notice on another FC (Tmotor 20x20) that the "HD" plug was reversed as to what the DJI 03 pinout was. Thankfully I noticed this and had to manually switch all the little connectors.
Very good again, thanks. Is there any notable difference in the 04 air unit now thats out ?
I was going to ask you if the 03 air unit will work with Goggles 3. I looked at Get FPV and under their Goggles 3 is a note that Goggles 3 are backwards compatible with 03 air unit as long as you get the latest firmware. Yea! Thank you for the great videos, instructions and advise. It helps to watch through the video before working the drone. I had not taped down my motor wires so it was much easier to run the camera wire under the stack without removing any arms.
Hi Joshua,
First thanks for all your content. That's gold, for the lay out, you only have 2 lines in the CLI ?
Thank you
Thank you so much for this tutorial J.B.!
I need help Mr. Bardwell. I cant get my osd to show voltage in dji goggles v2. Though betaflight reads my voltage just fine. Im sure youre very busy, is there any chance you could connect me with someone who can help; if you are too busy? Thank you so much for the work you do!
Ive tried flashing the esc, the caddx vista air unit lite, and the goggles v2.
Ive tried messing with the setting in the goggles, in betaflight.
I messed around with the uarts and that helped other people but did not change anything for me. Though i dont understand uarts very well. Sorry.
Is it O3 or vista?
Its vista good sir@@harishgowtham_
I had the same issue with the o3 wire, the faster way was to remove the O3 camera cable from the unit and drag under the Esc.
I have the Goggles 2, would I be able to build this with the Caddx Nebula Pro Nano Vista Kit?
Your videos are great!
2:00
Dji o3 airunit has a fragile body. when dropped, the part with which you attach it to the video is pressed in and hits right on the processor, which cracks and fails. now most users turn the DJI o3 airunit upside down. then the main problem goes away.
Hello Sir. Thank you for all the help. Why am I not seeing that particular "03" preset in betaflight 10.9.0? I am connected to the internet. What am I missing?
the O3 air unit was never screwed down , just taped . was that on purpose or does it need to be screwed down at all?
It's mounted with double sided tape. Not screws.
The o3 can take down to 7 volts. You could make a video showing the voltage/range relation. Unless im wrong. I know im about go work 12 hours.
In the hope that someone sees this comment, I am using these videos to help me set up my first build. However, I have the DJI Goggles v1 with a Vista running WTFOS. Do I need to do that extra step with the CLI commands about the canvas width and height on that VTx, or is that specific to the O3 setup? Thanks!
Hi @JoshuaBardwell,
Do I need to do the CLI commands for the original air unit/vista working with Goggles Integra or is it only for 03 units?
If using DJI remote controller, it can directly links with O3 Air Unit without the Xilo Stax isn’t it?
Undecided whether to go with walksnail or dji o3. The whole reason I wanted to build a drone is because of the upcoming possible dji ban. I wonder if I use my dji fpv goggles v2 I already own will I have to use all the dji software on the phone like I have to do with my dji fpv?
I bought the kit with the 03 setup and controller 2 I did exactly what you did in this video, and you said you could go fly and no matter what buttons I push on the controller it does not arm it. Am I missing something
Is there a Stl file for the antenna mounts ? I ordered the frame separately. Would be great 😁 love the videos jb ! Finished my quad yesterday 😍 just wondering how to align the battery cable. When it’s sideways it seems to be in the way sometimes 🤔 it’s my first fpv quad tho. So I never had a quad with more then 1s 😅
You can find stl here www.thingiverse.com/thing:4874074
@@JoshuaBardwell thank you for the fast reply! Is it the vista mount? Will it be compatible with o3 air unit antenna ?
Maybe this is the one you want then: www.thingiverse.com/thing:5660773
@@JoshuaBardwell Perfect ! That seems to be the one you used in the video. Thanks a lot and keep up the great work!
If I use the 03 Air unit in a emergency scenario in a no fly zone would it physically restrict the quad from arming?
No. The O3 does not support any such restriction when used in a self-built (DIY) drone.
first of all thanks for all of the videos I owe a great deal of my knowledge of drones mostly to you!
secondly, I ran into a problem in this video. everything was going to plan until I tried to activate the 03 air unit, it wont even show up in the dji assistant 2 app (consumer series), but it does show up on my pc as external storage. I tried different usb-c cables, i tried it with a battery plugged in, I even tried the "FPV series" app. any idea on what to do?
thanks again!
With gg2 glasses, is it necessary to unlock Ham.cfg ? or is there another way? Thanks !
Great video in great series now I understand more about live video transmission on a quadcopter. And I hate to ask you but is it possible to mount a camera and transmitter board on any drone powered up and have fpv??? The reason I ask is because I have so much latency with my current drone that I can't fly fpv.
Yeah that should be possible. Just need to figure out how to power it.
does that ham unlock work for the goggles 2 or just the v2
Depends on which mode you're in. In O3 mode the ham unlock is the same as g2.
@@JoshuaBardwell what do you mean what mode whats that
The goggles can be switched between DJI Digital FPV System mode (for Vista and older air unit), O3 mode, Avata mode, and DJI FPV Drone mode.
what did i buy the wrong kit? my air unit harness has the 6 pin 1mm plug on one side and some weird one with extra unused pins on the other side. i had to cut and solder an old harness end on it to make it useable.
If you think you got the wrong part, email support@getfpv.com.
1:15 i mean to be fair, if the rest of the industry agreed on connection order standards, Analog, walksnail or hdzero etc could all have a shared plug as well, no?
What makes you say that the FPV industry standardized on connectors? Every FC and esc has a different connector, for example.
Couldn’t find the preset you have mentioned for Dji o3 osd
What’s going on sir, just finished building my 7” Rekon. I ran into an issue tho. My motors will not go the direction I wants them to on Beta flight. I’ve even tried using the wizard, and manually tried to change it. When I tap on the motor that I need to change direction, it just pauses for a sec and continues rotating, just not the direction I need it to. I just watch your entire season on understanding beta flight. Any advice for me. And by the way great work on explaining FPV to people like me. Your the Mr. Wonderful on Shark Tank for FPV lol.
If I update the firmware on my v2 goggles to use o3 air unit, can I still use caddx vista?? Thanks
I believe so but you have to change system in goggles than reset
Thanks for the video. I'm having some issues, as im using crossfire, and for this flight controller both crossfire and DJI use the same UART (UART3), so when I load the preset I lose crossfire control. Can I use a separate UART for Crossfire so that I can have both working? Thanks
Yes absolutely. You need to put Crossfire on UART 4 and DJI on UART 3.
I have the goggles V2 and when i go to device, i do not have any options to switch to. I have updated the firmware on the DJI assistant 2 (DJI FPV Series) and the DJI assistant 2 (consumer drone series) says "no flight logs" when connected. Any help?
Another thing i noticed is i have BF 4.4 but all my fc run 4.3 and i still get the HD osd in my dvr.
04 air unit pro fit this build?
will the wiring on dji 03 vtx plugging in to a speedy bee v3 f7 FC with a crossfire receiver burn out the vtx ? since i heard 03 has a built in receiver
you mention that you printed these antenna mounts (7:18) wondering if there is a place i can download the stl and likewise print them myself, would love to have it in my prefered color scheme, buy i can only find the part available for purchase. more than happy to purchase the stl.
They're available from this Thingiverse album: www.thingiverse.com/thing:4874074
thank you kindly for the rapid response good sir! appreciate all you do for the community. this album appears to be for the v1 QAV-S frame. i will try and do some tinkering and get'er done.@@JoshuaBardwell
what is the name of the double-sided tape measure?
JB not running a capacitor? does he explain why or why not?
It will be added in a later section. I'm definitely using it!
I'm sorry I ever doubted you...Please forgive@@JoshuaBardwell
27:00 you’re editor left a very nice note for you 😂
I think it’s a sticker on his table
Does the ham cfg support patch work with the goggles 3?
Yes.
Do you know why my drone keeps failsafeing when i am 10 meters away from the drone?
I have tried to fix it like 3 months but i cant fix it please help me.
Check your elrs packet rates on your TX
I am not getting the OSD in my BF con i have tried to re do it all but still same problem. May please assist
If I don't have dji plug in the fc. Can I solder the wiri?
Yes.
Hi Joshua, how are you! Your videos helped me a lot, but now I bought the Integra goggles and I can't find the configuration option as in the V2 goggles where I can define the camera transmission power, both o3 and caddx. in the bone integra is not possible??
O3 does not have adjustable transmission power. Neither does Vista when used with g2 or Integra.
Isn't the camera wire on the O3 unpluggable?
Will a Caddx Nebula Pro Vista Kit fit this frame?
I bought kit with dji controller but there is no video how to set up that? Only this beta... it's not clear do i need to solder something for dji controller?
Did you ever figure out what to do? I am stuck with this as well. I feel i have done everything correctly. My goggles have the 03 units pic displayed, but I get nothing from my DJI 3 controller.
@@gsrsin hey, did you figure that out? i bought this kit and i bought dji goggles 2. im also planning on buying dji rc 2 but i dont understand how to bind it all together. i saw a video that with the o3 air unit you dont need any other receiver to fly the drone, do you know how does that work?
@@mateuszsidorowicz3247I did, but I have the goggles 3 and controller 3. I have now way to remember all I did, but I know that I had to change my transmit port (uart 1) and I had to change a setting in my goggles to Sbus fast.
@@gsrsin ok, i got deeper into that and now i think i am not going to buy the dji rc 2 and instead i will buy tbs tango 2 pro. it should work with ELRS so i will use the ELRS receiver and dji o3 air unit, so i will fly the traditional way. anyways thank you for your help.
@mateuszsidorowicz3247 no worries. If it helps, the DJI stuff is nice, though. You even get the warning colors (orange and red lines at the bottom of your screen) when you are starting to get too far. This already saved me a few times.
I will tell you that you should watch his build videos multiple times before you begin. He kind of mixes shit up, so you can start doing the wrong thing if you don't have the equipment he is working on. A lot of steps can be removed with the 03 air unit, making things simpler. I have my own rates, too. I feel that is important. No doubt he likes his rates as well as others, whereas I think everyone should be using mine. Haha. A lot of personal preferences in this world!
Hey JB, What foam are you using on your goggles 2?
I am not sure what JB is using, but I am using the updated Dji goggle 2/Integra "Soft" foam. It made my goggles 2 fit as good as my Original V1/V2 goggles. I was running the Pyrodrone Comfy foam on my goggles 2 before the Dji foam, and it was really good too. Worst: Stock goggles 2 foam. Better: Pyrodrone Comfy Foam for Goggles 2. Best: Dji soft foam plate for goggles 2.
@@mikebergman1817 thank you sir!
So for o3 system I will need to use the dji controller only?
No you can install another receiver. I will install elrs in this example.
Does the O3 act as a receiver for the DJI controller and send the commands to the FC?
It can, yes, but that's not how this build is set up.
@@JoshuaBardwell I was hoping to delay getting the controller, but if I wan't to get out of noob mode, time to pull out the CC again. Glad you put out this series. The Avata was my in to FPV, and had no clue how to go about building my own.
FYI There is an issue with 10v BEC on the stax V2 flight controller. My video cut out during a hard landing and I traced the issue to the flight controller BEC having 0v and no longer powering the DJI o3 air unit. I emailed support and they wrote that apparently they are discovering that the BEC on the controller cannot handle the power needs of the o3 air unit. They suggested that i run power directly from VBat. If anyone is having issues, I hope that this helps.
How do we use the o4 air unit on this build?
At this time there isn't a good mounting solution for the Pro camera. GetFPV is working on it. The Lite can be used with a 3D printed camera adapter.
@@JoshuaBardwell will this Betaflight setup be the same for the 04 Pro? I’m working on a build and I’m using the 04 Pro.
I’m using Goggles 3 btw.
@@JoshuaBardwell is there a link to this adapter? im looking at using the qas-v 2 jb frame with o4 lite
Does anyone know the approximate total cost of this build with the O3 VTX?
The kit is $299 you buy your own receiver and vTX.
Does Bardwell have a cat? We got to see it.
All videos in this series are in this playlist: th-cam.com/play/PLwoDb7WF6c8l24IM83wIS94XzhuMVC2gx.html
15:24😂😂 like if you saw it
my V2 menu looks nothing like yours. System/ Device isnt on my menu
The menus change depending what mode your goggles are in. At this timestamp in the video, I was in the DJI FPV System mode, switching to the O3 mode. th-cam.com/video/kinmxuOnoUM/w-d-xo.html&si=nYJpg1Pj-ynobsbs
If you were already in O3 mode, or if you were in Avata Mode or DJI FPV Drone Mode, the menu would look different.
what tshirt is that?
you saying ,you do not need to plug battery to bind just usb and this step is wrong.
I don't think I said that, because you're right, you need the battery to bind.
I NEED HELP. Theres no voltage osd in my dji v2 goggles, but it shows voltage correctly in betaflight. I have treid everything. I need the voltage.Please help me guys.
what the f 1 minute and already 1.5k views
He is killing it mang.
It's been unlisted for a few days. Also, his "Patreons" have early access.
@@1RemotePilot Did he mention anything about streaming today?.. I thought Blunty mentioned he was going to be back the 27th, but he probably just meant that was when he was coming back home.
@@mikebergman1817 I'm not sure my fellow pilots. JB is a legend in my book, though. Let him live some offline lol. In all seriousness, I needed this refresher, sadly though, I had an abrupt disconnect today maybe 100 feet from my location, and have yet to set up GPS RTH, so my Grinderino got a lesson in physics today, instead of defying them all. I run DJI 03 AU, for VX/TX/RX. Coming from DJI FPV, Avata, and Air 2s. Previously built an Align M690L, but never had faith in it in the air. Went to DJI for work, but custom quadz for race and fun. JB, if somehow someway you read this, Betaflight 4.4 us all into binding DJI and GPS M10Q! We may not be worthy, but we sure try, your excellency!!
What happened to fpv news
new episode comes at 29th August