Hi everyone. First of all here is the link for the Ham file to download b3yond.d3vl.com/ham_cfg_support.zip Secondly it seems possible you could be in FCC mode but still only have 1 channel in 40mhz mode and 3ch in 10/20mhz mode. The FCC Ham file hack here will open it up to more channels and we believe increase output further but the actual level is not known. I am investigating this more as I write this.
it link doesnt work any more, but I already have a copy, do you still recommend this Mads in June 2023? Its a zip file, I opened it then pasted to sd card my V2 goggles come today. Regards from sunny Spain
Afternoon Ian. It,s 20/07/2023. I'm in Devon & I've tried this fcc hack but it doesn't seem to be working for me. My 03 air unit is on software version V01.02.0000 and my V2 goggles are on software version V01.07.0000. The goggles still show, 1 channel on 40Mhz. 3 channels on 20Mhz & 3 channels on 10Mhz. Have the designers found a way of stopping the hack with the s/w updates.? This video of yours is now 7 months old. Thanks for your help. Cheers Andy
received my Avata with Goggles 2 4 days ago, updated to recent firmware and applied the file to sd card that fits in the goggles and rebooted... works perfect first time. @@andymattock397
Just want to let you know that the work that you do on these systems in order to help the fpv community is extremely appreciated, thanks for what you do.
Worked as described with latest firmware on 03 air unit and goggles V2 as of 8/31/2024. Used file provided, inserted on SD card and rebooted, same results as on video. Thank you Mads Tech!
Would be interested in what the range will be with the hack. Would like to see if the system has a hard limit , similar to the 13.2km limit we saw with the dji fpv system with 1200mw and 50 mbits...
@@lidloviceczsk here’s my best advice. While the answer is easy to just get and then do, I recommend going to a field with a few batteries. Set your goggles to 40hz and fly around. Fly far, fly high, fly behind trees that are close to you. While doing so, look and see how your goggles react. Then do the same to 20hz and 10hz. I fly at 40hz and just checked that was in channel 2. I saw that it was low a bar so I moved to channel 1. I guess you should check this each time you fly and use whatever has best signal.
Thanks for your video and work…I opened all channels, but still no more than 1 to max 1.5 km range even in perfect los… I would be amazingly grateful for any help provided ❤ kind regards !
You're a legend! nice visualization on the spectran! We could compare an Vista set to 50mbit mode and 1200mw sitting in some distance vs. the new o3 - to see how much the DBs differ. But I suspect that the power levels will be dynamically raised by DJI (similar to CRSF). So measuring this will not be easy. On the other hand I think this new tech is just so good that we don't really need to bother much. Love it that there's still a simple "put a file on a card" hack - instead of something like the dronehacks unlocker... greets, Mario
Great stuff as always, what about the FCC hack for the vista and older air units? Is there a work around for the goggles 2 like there is for the V1 and V2?
thanks so much... seems i just unlocked some extra channels heheheh will test range tomorrow. your channel is so damn informative and your instruction is second to none. keep up the good work.
this has given me new hope in the dji systems (for now) i just spent a heap of hard earned on going digita only to find the lack if support and compatibility from said company. any progress on the INAV compatibility ? I had to come back to betaflight to get my telemetry back. Luck BF 4.4 has improved the RTH function ...Whats a long range system if you can't provide a decent and safe navigational system.
Hacked before release😍. When the extra channels are available, do you have to select one of the extra channels for increased output power or is channel 1 with the ham-file hack stronger than channel 1 in normal mode?
Great job very helpful for the community as aways! I have a question about this "hack". Will it work with the goggles v2 and older air units like polar vista or something like it. Thanks
Do you know the frequencies of the O3 Air Unit? I was under the impression that channel 1 on the Vista unit at 50 Mbps and channel 3 of the o3 Air unit at 20mHz would be able to fly together, but I was getting significant blocky break up, as was the other pilot. When we switched the Vista to channel 2 (50mb) and O3 to channel 1 at 20mHz, there was no interference at all! I thought the latter situation would be in the same frequency space. Any insight you have is much appreciated.
Ian. I found something out by accident Recently had an issue fixing a problem with someone using a vista... They had a old camera that worked with 606 firmware . But they had upgraded to 608. Thinking it was rhw best option. Then found out ..if you have 608 firmware with old style cam. As in now a wasp /runcam camera. It disabled the sbus function. So the new runcam system works with controller 2 But old system doesn't Worth having a look at
Hello and thanks for the video! I have the googles v2 and the o3 Unit. I can see now the 3 Channels in 40mhz mode but the range is still very bad (failsafe at 500m). Any ideas? Thanks for the help
Hi everyone. First of all here is the link for the Ham file to download b3yond.d3vl.com/ham_cfg_support.zip Secondly it seems possible you could be in FCC mode but still only have 1 channel in 40mhz mode and 3ch in 10/20mhz mode. The FCC Ham file hack here will open it up to more channels and we believe increase output further but the actual level is not known.
I did this hack with my integra googles and Vista and was successful. I also have an Air unit 03. Do I need to do the procedure again with the O3 air unit or will doing this hack once on the goggles is enough?
Hello, I have problems to fly with my new dji googles 2 and caddx vist or air unit over 25mW. Does the FCC hack also support this kind of combination. Which file I have to put on the caddx or on the air unit. (The naco power file and the ham file I already tried with no luck) I am running the latest firmware on all products. With the 03 system I haven´t any problems running it over 25mW. Hopefully you can help me. Best greets from Austria, Mario
Hi Mad Tech, Love your work. I am wanting to do this FCC Hack to my DJI Avata but since the 8th December update. I can't go into Transmissions -> Channel Mode and edit the Channel mode. So in this video, you can click on Channel Mode and go into Manual. With the new update, it does not allow me to change Channel mode at all. Any ideas please?
HAM file does work also for mini 3 (pro). I tested penetration on the avata and mini 3, and they are the same--> hence it works, however mini 3 is limited to 120m height. 500m not permitted with flying with RC2.
something strange happened today, I was able to select 500m on the goggles while flying with the mini 3 pro and motioncontroller 2, but an hour later the options above 120m were gone. did you have any luck flying 500m with the mini 3?
Great work keep them coming, I won't be buying the 03 as I'm happy with my Goggles V1 and air units/Vistas for a while but may get an Avata and Goggles V2 kit in the future, it is great to follow your channel and get a no BS take on what's new and up and coming, thanks.
Question. Let's say I still want to use my goggles to record video instead of the air unit. Does every SD card I use have to have the file on it to utilize the FCC hack? If I format my card I also have to copy the file again? It doesn't get written to some non-volatile memory in the goggles so it never goes away?
great stuff Ian, thank you for these insights! Can you map the channels 1-7 to Raceband, or give the center frequencies, so we can map these to FPV Bands?
Do in the USA purchased googles 2 and O3 air unit still need this FCC hack as well? I am asking because I only see one available channel in 40MHz mode. Have the newest firmware on both devices.
Hey great vid thanks for this! I've done this unlock but I'm only getting 4mbs of signal unless I turn off auto cooling? Is there a way to have auto cooling on so that when I power on my air unit doesn't fry while waiting for gps satellites?
Does the Ham File need to be on BOTH the goggles card and the Integra/o3 air unit card? Thank you -- have joined your Patreon because of your excellent content and interactions with FPV pilots like me.
@@MadRC I’m asking because I’m wondering how this O3 unit will be usable with the group of other pilots wit other systems like Walksnail, DJI v1, HDZero, Analog
Only once as long as you don’t update or reset the goggle. The hack is linked to the goggles so each new Airunit you add will also get the hack once it’s been binded. However if you update the freeware on the goggles 2 you will need to do it again.
@@MadRC Okay thank you i already finish to upgrade firmware on both goggles 2 and O3 air unit.. i didn't insert sd card but after finish i still have 3 channel in 40Hz..is that normal?
Hi Everyone! Tested on DJI FPV drone and goggle with firmware update 1.03.0000, and felt that there are no improvements to the range or signal penetration. Losing signal already on the distance of 300 m on the hight of 20 m and behind some 50m wide forest line. Does someone really have experienced improvements on DJI FPV(not downgraded to older firmware versions) using this method?
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
Hi everyone. First of all here is the link for the Ham file to download
b3yond.d3vl.com/ham_cfg_support.zip
Secondly it seems possible you could be in FCC mode but still only have 1 channel in 40mhz mode and 3ch in 10/20mhz mode.
The FCC Ham file hack here will open it up to more channels and we believe increase output further but the actual level is not known.
I am investigating this more as I write this.
it link doesnt work any more, but I already have a copy, do you still recommend this Mads in June 2023? Its a zip file, I opened it then pasted to sd card my V2 goggles come today. Regards from sunny Spain
Afternoon Ian. It,s 20/07/2023. I'm in Devon & I've tried this fcc hack but it doesn't seem to be working for me. My 03 air unit is on software version V01.02.0000 and my V2 goggles are on software version V01.07.0000. The goggles still show, 1 channel on 40Mhz. 3 channels on 20Mhz & 3 channels on 10Mhz. Have the designers found a way of stopping the hack with the s/w updates.? This video of yours is now 7 months old. Thanks for your help. Cheers Andy
Do you have to put it on a certain channel to get maximum range
received my Avata with Goggles 2 4 days ago, updated to recent firmware and applied the file to sd card that fits in the goggles and rebooted... works perfect first time. @@andymattock397
I’ve the problem, that I even can’t set the „channel mode“ into manually. Can someone help me?
Just want to let you know that the work that you do on these systems in order to help the fpv community is extremely appreciated, thanks for what you do.
100% agree with what he said you've helped me get in the air a few times now ❤️
wait...so you do not need a FC connected?
Worked as described with latest firmware on 03 air unit and goggles V2 as of 8/31/2024. Used file provided, inserted on SD card and rebooted, same results as on video. Thank you Mads Tech!
Would be interested in what the range will be with the hack. Would like to see if the system has a hard limit , similar to the 13.2km limit we saw with the dji fpv system with 1200mw and 50 mbits...
This is great. Can I still stay in auto and still get the benefits of ffc or do I have to be in manual mode?
Anyone knows?
Nice work as always Ian. Cheers for checking the compatibility of the hack and getting the info out to us 💪
@Wezley Varty we are waiting for yours long range test of the O3 and Goolles 2 system :)
@@marcin8442 got my shipping notification yesterday for my 03 😛
@@WezleyVarty yay! mine also arrived yesterday and I'm looking forward to seeing your rangetests!
@@Rcschim Lucky! Mine should be here next week based on DHL tracking. Really keen to see how far we can push it!
To take advantage of the fcc hack, do I leave it in manual mode and select and mhz and channel or can I leave it in auto mode ?
Commenting to add focus to this question. Same doubts here
I can't understand it too
Same same…
@@LenZFPV did u figured out pls? ty
@@lidloviceczsk here’s my best advice. While the answer is easy to just get and then do, I recommend going to a field with a few batteries. Set your goggles to 40hz and fly around. Fly far, fly high, fly behind trees that are close to you. While doing so, look and see how your goggles react. Then do the same to 20hz and 10hz.
I fly at 40hz and just checked that was in channel 2. I saw that it was low a bar so I moved to channel 1. I guess you should check this each time you fly and use whatever has best signal.
Do you leave it in auto or do you need to put it in manual mode if manual mode what is the best channel?
Thanks for your video and work…I opened all channels, but still no more than 1 to max 1.5 km range even in perfect los… I would be amazingly grateful for any help provided ❤ kind regards !
Thanks! Great job, Does the same hack work with v2 goggles?
Yes, it's the same steps. If you have the extra channels you're good,.
@@neuroticsdubstephow about goggles 3
Thanks for this... Thought it was strange that all the other reviews are showing the 40mhz with only one channel. Now makes sense...
You're a legend! nice visualization on the spectran!
We could compare an Vista set to 50mbit mode and 1200mw sitting in some distance vs. the new o3 - to see how much the DBs differ.
But I suspect that the power levels will be dynamically raised by DJI (similar to CRSF). So measuring this will not be easy.
On the other hand I think this new tech is just so good that we don't really need to bother much.
Love it that there's still a simple "put a file on a card" hack - instead of something like the dronehacks unlocker...
greets, Mario
The best fpv channel and happy to be a Patreon to support this content
shoud the channel settings be in auto or manual for the best range possible?
HOURS LOOKING FOR THIS INFO
THANK YOU
Immediately bought you a coffee
Thanks that's massively appreciated>
Great stuff as always, what about the FCC hack for the vista and older air units? Is there a work around for the goggles 2 like there is for the V1 and V2?
You are a star, this is why I follow your channel streight to the point honest decent reviews... Thank you very much for your input.
Some good hacks for the Avata! Thanks! This is a great piece of information!
thanks so much... seems i just unlocked some extra channels heheheh will test range tomorrow. your channel is so damn informative and your instruction is second to none. keep up the good work.
this has given me new hope in the dji systems (for now) i just spent a heap of hard earned on going digita only to find the lack if support and compatibility from said company. any progress on the INAV compatibility ? I had to come back to betaflight to get my telemetry back. Luck BF 4.4 has improved the RTH function ...Whats a long range system if you can't provide a decent and safe navigational system.
This is great video sir. I do have a question, so after doing this what is the correct setting that I should leave it on, 20 or 40 mhz.
Hacked before release😍.
When the extra channels are available, do you have to select one of the extra channels for increased output power or is channel 1 with the ham-file hack stronger than channel 1 in normal mode?
I don't have the O3 air unit yet but I'm still saving this vid for reference! Can't wait to try the new O3!
Hi Ian! I did this, but I can barely get 15Mbps at the most! thank you for your help and cheers from Ecuador!
Just updated firmware on Goggles 2 and I have have the 03 unit. FCC isn't working anymore. Any thoughts?
I appreciate all the content you put out here! Thanks for the tip! It would be interesting to try this once I got the air unit!
so one the file is added in, which channel should we use?
Great job very helpful for the community as aways! I have a question about this "hack". Will it work with the goggles v2 and older air units like polar vista or something like it. Thanks
Does it work with v2 googles?
I just ordered the Goggles 2. When I get them can I do this out of the box, or do I need to be in a specific version first?
That's a great hack will this give better penetration through foliage?
Great work, i see 4 chans on the dji fpv with Integra, do I also need to change any settings?
Am i to assume I will finally get more range from the 03 unit on my Flywoo 85 quad ?
Did you?
Do you know the frequencies of the O3 Air Unit? I was under the impression that channel 1 on the Vista unit at 50 Mbps and channel 3 of the o3 Air unit at 20mHz would be able to fly together, but I was getting significant blocky break up, as was the other pilot.
When we switched the Vista to channel 2 (50mb) and O3 to channel 1 at 20mHz, there was no interference at all!
I thought the latter situation would be in the same frequency space.
Any insight you have is much appreciated.
Ian. I found something out by accident
Recently had an issue fixing a problem with someone using a vista...
They had a old camera that worked with 606 firmware .
But they had upgraded to 608. Thinking it was rhw best option.
Then found out ..if you have 608 firmware with old style cam. As in now a wasp /runcam camera.
It disabled the sbus function.
So the new runcam system works with controller 2
But old system doesn't
Worth having a look at
Essentially locking caddx out of the new system ...runcam wasp only
And if in correct not only does the 608 lock.out the sbus..it also disables the uart
I would attempt to dm him that somehow.... thats good
@@Halphbaked210 yeah it's worth a though and cpuld well be ahead of the curve on that one but I've no idea how to email him...
Interesting I’ll take a look
Hello and thanks for the video!
I have the googles v2 and the o3 Unit. I can see now the 3 Channels in 40mhz mode but the range is still very bad (failsafe at 500m). Any ideas? Thanks for the help
yeah me too, i even try 1200mw "naco_pwr" hack, but no luck, range is still very bad.
Have you found a solution?
Anything?
Does this work with the vista when using the goggles 2?
good work, will this work with the mini 3 pro, cheers
Hi everyone. First of all here is the link for the Ham file to download
b3yond.d3vl.com/ham_cfg_support.zip
Secondly it seems possible you could be in FCC mode but still only have 1 channel in 40mhz mode and 3ch in 10/20mhz mode.
The FCC Ham file hack here will open it up to more channels and we believe increase output further but the actual level is not known.
does it work.. with the first dji fpv if we update it the latest firmware available?
Hello, thank you for your work, you have been able to change the signal power with the V2 and air unit O3? for Europe clear.
You are the MAN! Thank you so much for this Ian! Cheers Mate!
I'm wondering if the FCC hacks in DJI Fly apps will work
I have one for my Mavic and it does seem to support the Avata, so should work with O3 AU? 🤔
Thanks, you just saved me 37 euro on FCC removal app.
I did this hack with my integra googles and Vista and was successful. I also have an Air unit 03. Do I need to do the procedure again with the O3 air unit or will doing this hack once on the goggles is enough?
I love this video, liked and subbed
How can I change the frequency from 5.8GHz to 2.4GHz?
Danke!
Thanks so much.
Did all that, got the extra channels but the range is dismal. What am I missing? How does the unit set the powelevel? Is there a way to influence it?
Hello,
I have problems to fly with my new dji googles 2 and caddx vist or air unit over 25mW.
Does the FCC hack also support this kind of combination.
Which file I have to put on the caddx or on the air unit.
(The naco power file and the ham file I already tried with no luck)
I am running the latest firmware on all products.
With the 03 system I haven´t any problems running it over 25mW.
Hopefully you can help me.
Best greets from Austria,
Mario
Hi Mad Tech,
Love your work. I am wanting to do this FCC Hack to my DJI Avata but since the 8th December update. I can't go into Transmissions -> Channel Mode and edit the Channel mode. So in this video, you can click on Channel Mode and go into Manual. With the new update, it does not allow me to change Channel mode at all. Any ideas please?
liga o controle, o drone e o oculos. Se tiver um dos três desligado o menu fica inativo.
Thanks Ian! Will this work on the dji fpv drone?
Thanks a lot for so clean and detailed explanation and visualisation, it helped me a lot.
Would it work with integra as well?
Yes.
HAM file does work also for mini 3 (pro). I tested penetration on the avata and mini 3, and they are the same--> hence it works, however mini 3 is limited to 120m height. 500m not permitted with flying with RC2.
something strange happened today, I was able to select 500m on the goggles while flying with the mini 3 pro and motioncontroller 2, but an hour later the options above 120m were gone. did you have any luck flying 500m with the mini 3?
Hello, thanks for the video.
Do you already preparing the hack for the new update, or is there already on hack?
Greets !
Found how to bind them now so all good, thank u.
Which channel should i use?
Hey buddy, quick question. You leave the channel mode in auto or manual ?
You can use neither. Many have found manual better overall though.
Thank you.for your help, great video. I couldn't get to work on a macbook, but worked on windows
Thanks for this awesome video, I am on FW 01.07.0000 with goggles 2, and channel mode selection is greyed out with the avata, any ideas?
How can you have an embargo when you have nothing to do with them. What are they going to do, set your DJI gear to self destruct remotely?
I have it with someone else who supplied it.
@@MadRC Fair enough but they would never know who that was. Anyway just a bit of tongue in cheek. Great channel by the way.
Great work keep them coming, I won't be buying the 03 as I'm happy with my Goggles V1 and air units/Vistas for a while but may get an Avata and Goggles V2 kit in the future, it is great to follow your channel and get a no BS take on what's new and up and coming, thanks.
So, do we set to auto or select manual ? If manual, then what Mhz
Question. Let's say I still want to use my goggles to record video instead of the air unit. Does every SD card I use have to have the file on it to utilize the FCC hack? If I format my card I also have to copy the file again? It doesn't get written to some non-volatile memory in the goggles so it never goes away?
7:02 it went super Sayan
I heard it will go up to 2W
great stuff Ian, thank you for these insights! Can you map the channels 1-7 to Raceband, or give the center frequencies, so we can map these to FPV Bands?
Thanks for the vid I haven't done this to mine and I have 3 channels on 40 and 7 on 20 and 10 do I still need to do the ham file ? Thanks
No once it’s done it will stay till you reset the goggles to factory settings or update the firmware.
Tks, my signal is much better now
Do in the USA purchased googles 2 and O3 air unit still need this FCC hack as well? I am asking because I only see one available channel in 40MHz mode. Have the newest firmware on both devices.
Are the FPV Goggle V2 with O3 upgrade still capable to work with the Caddx Air Unit?
Yes ✌🏼 only need to change back to standard caddx overview
@@marcelschneider3980 Could do you made a video showing this capability? That would be very appreciated 🙂
bonjour de France excellente chaine et merci pour toutes les vidéos que je sui de prêt
Hey buddy, I urgently need to know how many milliwatts of power the Integra goggles use with the FCC hack, of course. Please respond, thanks a lot!
Hi, Thanks for the info :)
Do you know if audience mode works on 50Mbits. Thanks
No its not
So just one time reboot right? After that you remove the file from sd card?
So now I have added the Ham file to my goggles sd card do I leave it in Auto or manual 10/20/40mhz or is the file active on all of the above? Thanks
Auto is best
@@MadRC thank you 👍🏻
hello! thanks for amazing video! why my channel mode is inactive and i cant se the channels ?
Do we have to leave the sd inside the googles ?! Thanks in advanced
I have the same question
Is there a fcc hack for v2 if you update update to the latest ski update for goggles and vista. Great job
Is it the same for using the goggles with Vista and air unit?
I haven't found a single person in the US, that has all the channels including myself. I've had to use the FCC hack, even though I'm in the US.
Yea this is becoming clear. I’m investigating more.
Hello. So it is superfluous to download it from the site, if one can create the file himself with a normal text program
Hey! Do I need to do the hack on the unit itself aswell? Thanks!
Work on goggles 3?
I have the o3 and goggles v2, do I need to root the o3 unit to get full power or just the goggles?
It seem to work but OSD is showing me „10mw“ RF output. Is this just a lie or did I miss something?
Hey great vid thanks for this! I've done this unlock but I'm only getting 4mbs of signal unless I turn off auto cooling? Is there a way to have auto cooling on so that when I power on my air unit doesn't fry while waiting for gps satellites?
It sounds like you don’t have MSP setup correctly
@@MadRC yeah I can’t figure it out? Following the instruction manual step by step and any port and msp combination won’t display any info?
would be nice to be able to use different controllers with it with more channels available to control more functions.
Does the Ham File need to be on BOTH the goggles card and the Integra/o3 air unit card? Thank you -- have joined your Patreon because of your excellent content and interactions with FPV pilots like me.
Only on goggles. Once it’s unlocked you don’t need to keep it on the card either. It will only stop if you update FW or reset the goggles.
Thank you
Will this work with a text edit file on Mac?
@Mads Tech the channel frequencies range is the same as for DJI V2/V1 - previous DJI FPV system ?
No
@@MadRC I’m asking because I’m wondering how this O3 unit will be usable with the group of other pilots wit other systems like Walksnail, DJI v1, HDZero, Analog
How much distance can be increased?
Do you only have to do it once or again each time you install a new 03 unit in a new build?
Only once as long as you don’t update or reset the goggle. The hack is linked to the goggles so each new Airunit you add will also get the hack once it’s been binded. However if you update the freeware on the goggles 2 you will need to do it again.
Before transfer of textfile to the SD card, do you format the SD card in the goggles or in the Windows PC
Goggle is best
So do we choose a specific channel under 10MHz, 20MHz or 40MHZ? Or do we set it back to auto when we imported the file?
It’s your choice. The system will use the wider bandwith in auto anyways but people say they get better results around WiFi in manual mode.
Thanks for the fast reply!@@MadRC
Tried it in real life and the range/penetration is much better! Thanks! @@MadRC I've set mine back in auto-mode and it works great
Do u need this for the V2 goggles?
can i connect the dji googles 2 to the original dji fpv drone ?
Thanks a bunch Mads Tech! Now we're cooking with lava!!!
after put ham file, are we need to rebinding our o3 air unit or not? need andswer pls. 🙏🏽
No
@@MadRC Okay thank you
i already finish to upgrade firmware on both goggles 2 and O3 air unit.. i didn't insert sd card but after finish i still have 3 channel in 40Hz..is that normal?
Hi Everyone! Tested on DJI FPV drone and goggle with firmware update 1.03.0000, and felt that there are no improvements to the range or signal penetration. Losing signal already on the distance of 300 m on the hight of 20 m and behind some 50m wide forest line. Does someone really have experienced improvements on DJI FPV(not downgraded to older firmware versions) using this method?
same here, seem like useless hack, it make drone and goggle hotter on idle by increase signal strengh.
Have you found solution yet?
Should I leave channel mode on auto after this?
Yes you can but some people find it’s better to use manual.
Does this still work if you have the latest firmware on V2 goggles and air unit? Goggles is rooted.
Yes.
@@MadRC Thank you!
How do i get the 03 mode on my v2 goggles? do i have to update goggles firmware? thanks
@@gregdavidd which firmware can only find a new firmware for using the avata drone?