How to fix RIPS, TEARS, AND CIGARETTE BURNS in your cars upholstery! Satisfying ASMR Car Detail
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2020
- How to fix RIPS, TEARS, AND CIGARETTE BURNS in your cars upholstery! We break down exactly how to fix and color match your upholstery using velour repair fibers and the burn out kit from HI-TECH! Thanks for watching!!
Products used:
Repair Kit with Velour Pump Sprayer and:
amzn.to/2H8cGRg
Adhesive to blend repair:
amzn.to/2H71Efe
**These are affiliate links to the products. We make a small commission on anything purchased from our links.
#cardetailing #upholsteryrepair #cigaretteburn
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. (IMJOSHV) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not (IMJOSHV) or any business affiliated to (IMJOSHV). - ยานยนต์และพาหนะ
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 4](http://i.ytimg.com/vi/e7Oqqo90x_w/mqdefault.jpg)
Had a two inch tear in my driver's side front seat. Used your technique and recomennded products. Added a material backer where the tear was. You would have no idea there was anything there to look at it now. Thanks for the video!!
I needed this vid my blunts always be burning my seats
My ex burned my driver's seat so bad when he was smoking, dropped the blunt between his legs... I was pissed
@@rachalsmith4126 shooot i’d never drop your blunt, you said ex?
Lmao
He was smoking. I don't smoke anymore.
😝 Gotta Cover The Seat Next Time...
#GotWorkAround?
A tip if you’re just repairing a burn or small tear in your own cloth seat. Take a razor blade and gently scape across your seat (can be in a hidden area) and you’ll get a little pile of the material, like the velour dust in the kit… then proceed like he did in the video. Put a small dab of glue that dries clear, put your “velour” scrapings on the glue area and work it in just like he did.
If your are a Detailer or restore cars, I can see this kit would be invaluable… and the whole kit costs a fraction of what you’d spend to have the seat fixed.
Wow! One of few repairs where I really couldn't tell where the hole was! Great professional job!
Youve come a long way!! 156,000 subs, lol. I felt awful discovering a burnhole yesterday. Your videos gave me hope and relief. This is doable. Thank you for the lessons. Truly what TH-cam was originally all about!
This is an outstanding upholstery restoration vid. You have inspired me to add this to my detailing services. This would be a great upsell and increase revenue while at the client location. Good luck and speedy recovery with the Lasik surgery 🍻
Thank you! That’s is exactly why I started with the interior repairs. As a mobile detail business it’s the perfect was to make more money! Lasik is done and 2020 the next day!!! Still have to take it easy (don’t want any chemical overspray getting on my eyes) but I’m super happy so far! Thanks
Good deal just in time this video,my son just burned a hole in my wife's car she is not really happy about it so I hope this works great 👍
Great job my friend. I was a floor layer for many many years and one of my specialties was repairing all types of flooring. So I appreciate what you do. Thank you for the video
I have few mistakes on my vynl flooring plank job I did on the main floor of my house. Is it possible to repair tiles junctures that have come apart?
Fantastic work, you made it look easy!
Thank you for this! New to car detailing and this is another tool in the auto arsenal to keep 🤙
Once again, super informative and fantastic commentary. Very well spoken.
Thanks John
Great video. I need to expand this into my detailing, thanks for the video!
Anytime!!! MAke sure to watch the new video going live tomorrow morning! Its a leather repair on an Aston Martin with full explanation!
Wow you're amazing thank you so much for the instructions ❤
Hell yeah thank you, hope your recovery goes well 🙏
Wow amazing, you are a magician!!!
Nice job! Love this learning. You should do a video on a repair then see how well it holds up to the cleaning and extraction. Just curious how the cleaners would react to the glues. Great video!
Great idea!
Great video. Thank you
Great video thanks 🙏🏽
I have an ugly burn hole in my light tan seats and this gave me the reassurance that it can be fixed!
Awesome!!! It’s easy to fill it in! A little harder to blend it out but just take your time and you can do it!!!
Awesome! I really appreciate this. The only question that I had, as I watch this was, what would be different if the hole/damage was in the "patterned" or "textured" section, rather than the "solid" color?
Wow it looks great from 5 feet away!
Great work
Very useful info! Thank you!
👍👍
Super helpful
Hey Josh! Great video and super informative! I’m looking for buy some of those velour fibers, but I was curious what the colors you used in this video were! I look forward to hearing from you and I hope all is well!! Thank you again for this great video
Thanks for the tips and info
You bet!
Bonito trabajo amigo
Hi. Do you think this kit and technique could work on the semi rigid foam from the car ceiling?
Great video
Thanks
I just burned a hole in my brand new car with black carpet not anywhere near where my feet will be so I’m not worried about a strong finish just a cover up. does this kit include a black fiber and what type of glue would work best it’s about 1 quarter of a inch fairly big burn?
Hey Josh I've got a huge question about repairing my cars passenger side seat leather anything would definitely help . Thank you
How long does this last before it opens up again ? This seems mostly cosmetic and looks great but is it actually addressing the hole / tear ?
Do you want to do another video on this how about when the stitching from Factory the thread in the stitching was loose and open to seen in your seat
How would you do the blending if the part you’re repairing has a pattern to it?
I have a hole (size of a pea) and getting bigger. There is empty space behind the fabric. Any suggestions? I ordered the kit, I know I will use it shortly
Thx
Thank you !
👍👍
Lasik is awesome best move I made
Yea I’m pretty excited about it! Tomorrow is the day 👍
Do I have to use the mask a tak or I could use any carpet protection?
Hey there. I'm a new subscriber as of 5 minutes a go. A little bit about me. I sold and managed in the car business for over 30 years and now I've created a way to get odors out of cars and that's a long story but I won't bore you with it now but in these vehicles that I'm getting cig smoke out of that are really bad, well you already know that if it's a heavily smoked in car there's always a few, if not more, burn holes. My question is, how long does it take, or how long did it take you to figure out how to do that so well???? I know that's a vast question because some are better than others from the the word jump, but if you could give me some type of response that would be very kind of you. I want to add to the bottom line and also, I have no idea what to charge. Thank you and I'll be following you!!!!!!!!
How does the repair stand up to carpet/ upholstry vacuum cleaner?
Hey! You got your 1 k subscribers!
👍👍
What’s that fabric sprayer thing called
Will this process work on a larger hole? My burn hole is about an inch and a half.
What if it was in the middle, like how would you have done different colors?
1:05 💜
👍👍
Nice to see a repair being done, looks great, after the repair has plenty of time to set up will it hold up to using an extractor on the seat or should you avoid it all together?
To be honest I’ve never extracted over a repair that I have known about... it should hold, but I would try to avoid scrubbing the area
I need help please... i made 4 tears in the headliner! Its a work car have to fix thatttt
🔥🔥
Hello, how about leather, on 2008 Mercedes C350 ? Leather is not the same
Good job
Thanks
Where do I purchase the kit mentioned in video.
ORDERING NOW!!! someone just burnt a hole in my cloth seats..........
i need one of youre kits and color's
That’s very impressive, but my burn hole is on the textured material in the center of the seat. Not the uniform gray area you demonstrate here.
Is it possible to fix a burn mark in the middle of the seat where there is a pattern?
mine is the same lol
Seems like the answer is no since he has yet to reply. No new subscriber for him then 🤷♂️
did you ever solve this problem? just happened to me
@@dabpuff150
I have not yet, but when I do I plan to get a hold of Ford OEM seat fabric and cut a piece.
Mine too, same truck & year
Skilzz..💯
WILL WOOD GLUE WORK?
I had pretty good luck with the Burn Out kit when repairing cigarette burns in a headliner. At the end, I used Mask A Tak and dusted the fibers over it to blend. Question: now the surface has a sticky residue. What can I do to fix that? As is, anything will stick to it and become a part
mask attack should settle after a bit and not be as sticky
@@imjoshv hope it does. It’s been over a week now but hasn’t yet. Not sure what else to do. Afraid to rub on it much. I don’t want that to remove the repair. Thanks for responding Josh.
I repaired my upholstery, but 24 hours later, and you still can’t touch it or you get black all over your hands.
What can I do to fix this problem bc the seat is no good if it will stain your clothes?
Thanks!
Could you cut a small piece of cloth from a hidden area (my car is two toned so the seats are the only thing that have grey) and just patch it instead of using fibers? Does that make sense
As long as you find a way to get it to hold! You’d be able to see where the patch is but the hole would be gone.
Now what if it were in the middle on the stitched fabric
Where buy the purchase
Shit you really save me with this one 🤩🥳💯💯💯
after the repair is done would sitting down on the repaired spot/hole cause the hole to come back or would it hold up ?
It should hold up! If it’s a big hold you should pre full it with some foam but otherwise it should be good!
Do you have to worry about the craft glue reactivating when you clean the seats with water/extraction?
Not it should stay as is, but you do want to be careful not to loosen it or pull it out
Is there a kit like that for ivory colored alcantara?
You can use the same product. It wont blend 100% but will look much better
Why didn’t you use the matching color from the beginning? Basically just needed to fill it first ?
Yea exactly. I just wanted to build the area up first.
Is that glue all purpose craft bond or quick dry?
either should work!
How much could I charge for this ? Like if the repair was the same in this video.
IMJOSHV - Car Detailing and Reconditioning Tips
Do you have one of a headliner repair?
I don’t get... same principal though! I’ll try to film one
I would like to see a headliner repair.. especially nylon headliners
I wish you could fix the tiny hole in my back seat that someone left.
Good luck with your Lasik.
Ha thanks! It went perfect!!
With how this operates can it work on small ceiling holes? It seems like it would be hard to pump it upwards.
Yea I works, it’s a little tricky to get the fibers in there but I can be done!
Amazon doesn't sell items anymore
You do the best job compared to the other videos where you can still see the repair. Yours is totally invisible.
Simple ,,,, yeah right .
Where did you get the fiber ?
vinylandhideproducts.com/collections/velour-products/products/velour-flock-1oz
You just have to chose the color
No holes but that area looks dirty after the spray
Will this work for a sofa?
It should
Random, but what boots? 4:10
Haha I used to work for Reef sandals. It’s a big surf company and they also made shoes. It’s a discontinued style but they were super comfortable!
I thought it meant tears like tears from my eyes😂
Haha
My idiot friend burnt a hole through my passenger seat with his cigarette