RLAARLO Omni-Terminator GYRO Mode ON and OFF - Quick Tutorial
ฝัง
- เผยแพร่เมื่อ 24 มี.ค. 2024
- I just received my Omni-Terminator a couple days ago and its awesome!
After watching a couple videos I saw that setting Gyro mode ON is highly recommended. This is a quick step by step instructional video to help others who maybe a little confused about how to switch it ON (then OFF). Hope you all find it helpful.
Extra hints: If you find the Gyro is too sensitive you can change that by doing the following:
1. Turn off your transmitter
2. While holding down Channel 3 (SWA) button, press the Power button.
3. Transmitter will power on into GYRO settings displaying 2 numbers. I believe the top number is for the Gyro Strength (I set mine to approx. 30%) and the bottom number for Reaction time (I set mine to approx. 70%).
4. Press the Channel 3 (SWA) button again and that will take you out of GYRO settings.
5. Repeat the process if you want to change the sensitivity again. - ยานยนต์และพาหนะ
Its incredible that they made turning it on and off such a hassle.
Thanks for making this video for everyone!
However, you omitted showing how to adjust both the amount of assistance ("Strength") and the sensitivity of that assistance ("Reaction Time") using the two knobs (just below the ch5 & ch6 buttons).
If you're in any soft stuff, be it sand, dirt, or snow, somewhere around 40 (top#) and 60 (bottom#) is a good place to start.
Also does anyone know how to adjust brake control when you hit reverse trigger?? Like on a Spektrum with a knob?
GYRO complete and ACCURATE instructions for the 6-ch Tx/Rx that comes with the 'Carbon' version.
Firstly, it's assumed that the Transmitter(Tx) and Receiver(Rx) are already bound to each other, and both powered ON, thus there's NO need to even open the Receiver(Rx) box at all.
1) Turn OFF the Transmitter, and keep the truck powered ON.
With the Transmitter OFF, press and hold the SWA (ch3) button, and then long-press the power ON button at the same time.
--->Transmitter(Tx) will now be in the Gyroscope setting mode.
Mixing Button (bottom LEFT on Tx): This turns the Gyro On/Off.
--->When the upper right corner of the screen shows a 'signal' symbol (e.g. cell tower symbol), the Gyroscope in ON, otherwise it's OFF.
ALSO:
The Forward/Reverse Button (bottom RIGHT on Tx): This alters the directional effect of the Gyroscope.
---> The ◥ symbol on the screen means 'normal' operation. I.E., if vehicle fishtails to the Right, gyro steers to the Right. (Make SURE this is selected!)
---> The ◣ symbol on the screen means 'reverse' operation. (NEVER select that!)
IMPORTANT: This following is correct and confirmed, but often cited incorrectly!
Left Steering Dual-rate Knob (below the ch5 button): Adjusts the Gyroscope's 'Sensitivity' aka 'Reaction Time'. (top number on the screen)
Right Throttle Dual-rate Knob (below the ch6 button): Adjusts the Gyroscope's 'Intervening Travel Ratio' aka 'Amount of Reaction'. (bottom number on the screen)
Once finished adjusting the settings,
Long-press the SWA (ch3) button and it will be saved. (2 beeps)
DONE! (so there's NO need to power off ,and then back on, anything!)
LASTLY, very IMPORTANT x2:
Return the Steering (endpoints s/b at least ~75%) and Throttle (@100% of course) dual-rate Knobs to your chosen, normal operating positions.
in what page did you found this?
It’s not in the Rlaarlo manual.
How do you program esc 60 amp one?
Would you happen to know how to get the lock icon to turn off?
My own shook so bad when I adjusted or tried to anyway that I decided to leave it off, in my humble opinion I'm so sorry that I bought two of these trucks, luckily I was able to return one to Amazon too bad I couldn't return them both, no more cheap Chines imports for me LoL, thanks for the information.
Thanks tried the feature but I don't know, feels weird. I think I'll switch to the MT12 Surface Radio Controller and swap a PWM ELRS receiver.
I still can’t get the gyro mode to work on my carbon version
Thank you mate. I've ordered and payed for the Carbon fiber model RZ001B-C still waiting For a confirmation from rlaarlo. Great informational video 😂
Hope it arrives soon 👍
Same .. payment is taken long
Do you know how to adjust the th trim and the st trim?
I have a new Carbon version and can't get my remote to do anything, there is a lock symbol on the screen. EDIT: I overlooked in the manual where it states jhow to unlock the remote, tad embarrassed, lol...
Wow thank you soooooo much for this video. If I want to tweak the level of how much gyro I want, at which point can I do it, and where is the button? Also, my steering is reversed, how I can fix this problem? I have been looking for a TH-cam video explaining this very complex radio transmitter. I can't seem to find anybody completely focus on all the features of this transmitter. Anyway, I'm saving this video to my favorite.
Hi there.. you can tweak the levels after powering it up with the SWA button pressed at the same time.. you will notice the two numbers and can tweak them using the 2 round dials.. I have found that 20-30 for the top number (gyro strength) and approx 60 for the bottom number (reaction time) are good. press the SWA button again once you have set those values and you should be good to go. This transmitter is actually a HOTRC CT-6A and there is a great review by PERTH WEST OZ RC which explains all the features including the reversing channels. Hope that all helps.
Was this a preorder that showed up?🤔
Thanks for the video!
Yeah this was a pre-order but I was aware it was going to take a while to receive it. Worth the wait though 👌
Thx, i got my Carbon Edition yesterday and took it for a first drive today. With the gyro on its undrivable. Instead of making it mor stable.... it gets much harder too drive. Feels like the gyro is working in the wrong direction. When i turned it off.... driving was great. Is there a way to switch the gyro so it works the other way around?
i found it. the button on the lower right switches the way the gyro reacts. now everything ist fine and the car is so stable and easy to drive
Awesome! How are you liking the car itself?
This is the most I have spent on an RC Car in my small collection. Just like most others have commented, I believe it is amazing value for the price. Especially if you are new to the hobby
Or you could learn how to drive an rc car without a useless gyro. It’s not a 2wd drift car.