How to Change a Dodge Output Speed Sensor
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- This will work for some jeep grand Cherokees to
When the P0720 code is detected, the check engine soon warning light will likely illuminate. The vehicle will also may have engine and transmission issues, including an inability to shift, a harsh shift feel, an erratic or malfunctioning speedometer, hesitation and misfiring from the engine, and potentially stalling
Thanks for the video.. now you showed exactly what I explained to the service advisor.. friggin idiot told me that I didn't know about my truck .drove 48 miles hwy speeds 70mph no problem .parked Vehicle for about 30-40 min.restarted Vehicle would not shift out of 2nd on a hot engine after stopping .Engine would not reave even though I had my foot to the floor. No check engine light.was only able to drive 30 mph ..But after sitting overnight transmission shifted perfectly. .. I told service advisor to have tech check input and output sensors prior to running a transmission test. Just because I am a woman he thinks I am a idiot. Was a tech for decades when I was young and cute haha now gray and old mist be dementia. Glad you put the video out proves me right. Your Awesome. 😮
For those interested. I believe the socket size is a 25mm metric but a 1" standard depth 12 point socket works. It's just a little loose but does the job.
Thanks for posting! I was surprised he didn't mention that pertinent tidbit of info. Lol
That's all I was looking for!
I mean come on, that and a part number, brand and price are like elementary info on a how to video. No subscribe from me.
Heck yeah.
Can anyone confirm this information?
Thank You! Just got the part today and looking to replace it once I'm off work, this video really helps me out a lot! Running a 98 grand Cherokee and excited to get her back on the road.
When you disconnect the battery the check engine light goes off because you cleared the codes not necessary because you fixed the problem.
Informative, short and to the point good vid, Thank you.
Thank you man. You're good at explaining and making it easier for others. Keep up the good work. 👏👏👏
THANK YOU! You described my car to a tee! You are the best! Keep making video's!
I've seen alot of videos and your good at this! Just some advice for next time, it would be nice to if you would explain what size socket (unless I missed it) why you waited to turn it over and what are you looking for that changed while taking it for a test drive (if anything else besides the light) Other than that! Keep up the good work, seriously!!
Just read the description...lol. Thanks
I like the 2ng gen dodges too. They're my favorite. I got a 2001 Dakota sport single cab with the 3.9 in it. It's blue and black. Beautiful lil truck.
Same but mine’s red. Love the body style
Cool Dude! We like the very same era of Chrysler's vehicles! Also, I prefer the mid-1960's-1979 Mopar cars & truck too. Have a '98 second Gen. RAM 1500 5.9L Magnum 5.9L + a supercharged 2003 Jeep TJ Sport 4.0L and 5-speed here and this video is fitting to the RAM as this explains a lot in simple terms & to the point. Great Video...Thanks!
Thank You for the video..very helpful..I need advice on a 2003 dodge caravan SE 3.3 engine..v6 cylinders..about 2 days ago I had the Transmission Control Module replace..due to the my car scanner kept giving me the code for a TCM..I've had the part for awhile .. I couldn't afford to replace it..anyways I finally got it replace..I figured the engine check light would go off ..NO!!! It didn't.. As I was leaving the mechanic's I noticed the engine check light on again..they asked if had an issue.. I said yes..the light didn't go off.. They put the scanner back on.. Got code p0725.. The mechanic told me it was.. Crankshaft sensor.. I went to purchase it..went back yesterday they out it on..here I am thinking..everything should be ok..NO!!! Check engine light back on 5mins after taking it for a test drive..🙄.. I wasn't charged for the work that was done..they want to return back Mon or Tuesday so they can put it on a big computer scanner..to see what is the problem ..before I throw anymore money away..could the issue be the input/output sensors..since the TCM has been changed & crankshaft too & light is still on.. Its also keeping me from smogging my van...also when they changed TCM..they were going to charged me for oil..since the TCM leaks oil out...the main mechanic told me that..could he been talking about the sensors leaking oil & not the TCM..🙄
I noticed you waited until the vehicle stop chiming to crank the car. Is that how we're supposed to be cranking cars? I just stick my key in and go. Just had to replace a fuel pump too so when I seen you pause before you crank I'm thinking maybe that's what I need to start doing
Yes I’ve heard it’s the right way to start the vehicle in the older 2000s models
The fuel pump primes when you fist turn to the on position, for a few seconds
This is the correct bellows vector
Well I hate to tell you brother but I just changed both sensors in my Dakota and its the opposite. The output sensor will not seat all the way, bout the length of that little nose in front. But it will seat in the back.
What kind of Dodge is this . Appears to be a 4x4 truck by the driveshaft next to the transmission. Im trying to research where the speedo sensor is on a 2009 charger. Appears to need all four wheel sensors and ABS module. But at the moment not concerned about the ABS Only need the speedo to work and hoping that will allow the transmission to shift from 1-2. . Would this be the transmission output sensor?
What was the truck doing that you knew it was bad besides the engine light being on?
Mine would act like it was in limp mode. Not going anywhere. Rpm 4-5. Thought I needed a trans.
I have a dodge 2006 sprinter van that's kicking out a P0717 code. Apparently this is a transmission input speed sensor failure code.
I can not find this part. Even Dodge can not help me.
Do you perhaps know the part number?
Are the input and output sensors the same?
Thank you in advance.
Hello Ronnie my name is Adolfo I have a 2000 Dodge Durango tell me the speed sensors bad I don't know it has a couple of lights on check engine and then the speedometer work sometimes and sometimes it doesn't do you have any ideas
When the OSSS has been changed,what does it mean if there is still sporadic speedometer fluctuations,like going from 0 to 120 mph?
It means you're haulin'! 😂
So, what are the symptoms showing that was the issue?
So where is it at under the vehicle? You video started with you already under the car
I think my input speed sensor is bad like i can hear it rattle when i shake it. Car won't go out of 2nd gear sometimes.
Is this the VSS speed sensor?
Hi there. I'm not sure if you are still active on this channel?
Is this for the speedometer cause mines not working?
With this sensor being bad would that keep the vehicle from shifting into overdrive?
Symptoms are in the description
no you need to actually take the transmission pan off and change the sensors and solenoids in there, look up tcc solenoid and governor solenoid, easy to change out, change your trans filter too when you take the pan off
Good afternoon, what are the symptoms of failure of this sensor? what changes in the car?
Felipe Macedo França it’s in description dude, few different things
Where is it at on the rear
Good video thanks for it!
Thank you
I got to do it twice as the first one I got from Auto Zone was bad and totally failed in one day, I replaced it Friday night but Saturday morning it wasn't working completely right and by the time I drove 40 miles my wait to start light came on telling me I was in limp mode, Then Sunday morning if would do over 20 mph till I restarted it then it shifted so I was going to go get one after I got home from Church and couldn't get it over 20 mph so got a ride to get another one, everything is made in china, at least the second one is doing better so far, so you might have to get two before you fix it
I have a p0501 vehicle speed sensor performance.
hey ron the chime bell dings constantly while truck is moving stops when i come to stop no warning lites come on every thing works .i drive an 02 Dakota 4.7 v8 automatic model slt 2door any thoughts?
Gotta question on the exact location of the apes sensor on the trans
Where the input sensor transmission location....
Where did he go under the b vehicle at?
My VSS speed sensor is showing code P0500 on my '01 Ram 1500. Is this the same thing for a 5 speed?
Same issue! Would love a response
What size socket ? Did the new one come with a magnet or do you re use the old magnet ??
And mine was a plug that wasn’t in .. check if it snap in before
I have a 2012 2500 and it says my overdrive sensor switch. Does that sound right?
I have an 02 Dodge Durango the speedometer doesn't work is it the oit put speed sensor also
Not very clear as to where the sensor is but I'm sure I'll find it. My truck is throwing this exact code
Cool thanks because mine speedometer will go funny what shift you all the gear s and drop to lower gear and somethimes will be ok. I will change that out because. The last owner change the one on. The rear end. And my abs brake light is on so that would explain it because it's all the same system
Will this work with a 2000 Dodge Stratus SE ????
I desperately need help
Hi there, I have a Dodge Ram 1500 3.7L with Manual transmission and I have a speed sensor code on it but i trying to located it, can you tell me what to look for?
Thanks on advanced and great video .
Where is that? I can’t tell where it is on the vehicle.
Great video
does a 2 wheel drive Jeep Grand Cherokee Laredo 1999 have also a input speedsensor and if so where is it located, pls?
I'm about to junk my 2012 dodge charger because don't even god can fix a rear left sensor and the crappy car is in safe mode since that. Replace Sensor, Axle, ABS module, Entire ABS module, and no way. I have normal read from 4 sensors like is ok but remain saying that have issues in rear left sensor and limp mode. IDK what else to do.
Having trouble finding output speed sensor on 2010 Jeep Grand Cherokee Laredo 2wd 3.7l A/T
Transmission tailshaft
What size socket did you use
What DTC'S
could you please tell me location--is this under car? Can an older woman do this?
Donde lo lleva una troca dakota 94
Would it be a problem if I didn’t disconnect the battery before changing?
There could be seeing that large red wire nearby that he moved out the way, play it safe around that wire there will be fireworks if you ground it
What size socket did you use for the output sensor?
Get the new sensor, take it out of the box, the socket that fits on the new one is the size. Knock knock!
I got question wold that speed sensor be bad make trans not shit In drive?
But where exactly is the location pls anyone?????,
I did mine after getting a p0720
good video lol but kinda need help actually locating where the sensor is at. you kinds just jumped into take it apart
They gave me two cold for transmission for Chrysler Pacifica 2004 they told me it was a sensor for transmission sensor goes inside the transmission and the cold are P0700 and P0740
What size socket
1 inch
Thanks...i change it...and i change the one on the rear end...97 dakota 4x4....the problem i got is....yhat i got no power (electrixity) on the plug that go connected to the rearend speed sensor....got no idea what could be....abs still acting up and speedometer still not working....
Good info. Hey I have a problem. I just bought a 2010 dodge journey rt . and the transmission speed sensor light is on?
Diego Valerio did you ever fight it out?
great vid
I need advice i replace rear speed sensor and my front breaks still lock i feel it front end of veicle divesdown
Do you have ABS on the front wheels?
I just got that code on my 2000 Ram at 301k.
What year is this dakota?
I need to remove the oil to change it?? Because i would like to change my sensor and I don't want to make a mess in my rent home...
Put something down just Incase of some drips and no you don’t have to remove oil to change
Ok, thank you I'll try tomorrow..
It would have been nice if you went for a short test run before and after nice video though
Would there be any reason why my speedo quit working after put the new one in?i
Vehicle speed sensor is the one on the rear axle.
Is the socket a 25mm or 1 inch??
I think when I did mine , a 25mm socket impact because it had more room and it ended up working. I did it on a 01 jeep grand cherokee laredo 4.0l it was super easy. Honestly it has a little magnet in side and if the old one was cleaned off it probably would have fixed it. But the new one was like 20 bucks I just use it.
Your Welcome buddy. I thought the same thing. Thinking I had to replace the Trans. But it was so simple and easy. I just replaced the one on the Trans. Then topped off the Trans. Because I've replaced the Trans filter and fluid before and didn't fix it. For a sec I thought the filter was clogged. But it was the sensor
Hi I was wondering if you could tell me what size of socket and is it regular or metric that you used for the video thank you and I'm going to subscribe
3/4wherch
This sensor takes a 25mm deep well socket to remove / install
My speed sensor is out too and it feels like it’s jerking could that be the reason
Tomminique Cook yes
Ok so what is the sensor on the rear end for?
Thats the input speed sensor the front is output
I have - 98 Dodge Ram 1500 my speedometer needle stays at 0 will this help??
Me too, did you solve it?
@@edwinj8275 yes it worked.
2023 almost 40 bucks due to the inflation out of control.
Got a 99 Dodge with a Cummins in it 2nd gen speedometer works when it wants to I replace the sensor in the transmission and it still no better I do not have a check engine light but it'll work when it wants to can you give me any suggestions
William Spencer maybe the abs sensor wheel speed sensor
There are videos showing the chips in the cluster of Your gauges suspect cracked solder connection consider reflow soldering joints
Would this help with error code p1740 on a 2001 Dodge Ram 1500 5.9 4x4
no I had the same code, drop the pan and change your tcc solenoid
Dealing with this now, intermittent p1740 comes back a week or so after clearing. Gonna try this tomorrow thanks for this reply
you didn't show where it was!
Need better clarity visually on location
me too! I got a 2001 neon. Can't seem to find the dang plug.
Mine has gone bad twice in 2 months! My guess is that the part is made in China! Is that correct?
Mine did basically drain my transmission. What does that mean?
Is it plastic?
Yes
Eric Steward yes
what would it mean when i pull this sensor out and all of my fluid drains out. can’t find any answers anywhere. please help!
Nothing just fill it back up
Wrong hole
I’m getting that code and my dodge magnum will not go over 35mph will this be the cause?
matt beezy yes
Mine was driving fine in the morning all of the sudden it started shifting bad and did not go over 35mph.
Dodge~to avoid!
This is for a 5.9L. not a 6.7L waste of my time.
When did dodge have a 6.7? You took the time to leave a comment but didn't bother thinking
@@differentbydesign7603 thinking about what. Yes Dodge has a 6.7.
Size tool
Ok
I don’t see this on my 05 but they sell this part for 05 am I just not seeing it any answers please help I got the part but do not see it on my transmission
Thank you
Can this cause a problem with ur van over heating
no
Of course light went out it reset when you unhooked the battery.
How come I had a lot of trans fluid pour out of mine when I took my old sensor out?
2006 Dodge ram 2500 5.9 turbo diesel
Anyone know where it's located on a 2004 ram 1500? Going crazy because I can't find it and not sure if I'm just blind or looking in the wrong spot
Would this part cause my truck to intermittently change gears late?
I found with my truck it would hold 1st gear until about 2500 rpm. I'm about to change my sensor now.
@@darrylbugbee146 yes exactly. Unfortunately my completely went out last week before I even got to try my fix. It's in the shop waiting to be rebuilt as I type
I reset my speedometer and now by 2002 dodge van will not start and all the dash lights flash ? What should I do to fix this?
I am driving a 01 Dodge if this goes bad what all will it cause the truck has a check engine light I had it checked and said that it was the sensor it hesitates whenever you take off from like a stop sign and it hesitates going down the highway
Could you possibly tell me where the output speed sensor is on a 1998 Dodge Ram 3500 van
What size socket is that?
Lo