I can’t explain how much stress & money your video just saved me! My trunk wouldn’t stay closed but i followed the steps & now it’s back working! Thank you sooooo much!
I am a Woman who saw your video on TH-cam & tried it on this Hot September day in Texas & and it worked precisely!!! Thank you so much for sharing the information.I really appreciate it. It certainly saved me time and Money.Keep sharing the information...this is what the World needs more of...you will be blessed.Thank you again.
I just had this happen and was ready to drop $150 on a used actuator and go through the pain in the ass process of installing it. I found this video, tried it, and it worked. So relieved that its working again. Thank you SO MUCH for saving me both time and money. You da man
Omg i can’t express how thankful I am about this video I am a single mom and I’ve been dealing with this issue for over two months nothing else on you tube for this procedure it works 🎉🎉 i have been putting off going to the dealership and all I did was exactly what you say i take it out clean it put it back and it works
Loved your video - very empowering, I do a lot of DIY but never thought I could access fuses in my engine. It turned out that my lift gate issue was not due to the fuse, but I still enjoyed your video and exploring the issue. I wanted to post and share with others what fixed my lift gate issue: apparently there is a "Power Door" on/off button down by the drivers knee that can get flicked on/off easily, I found this on Google and turning that button back on solved my problem. If Your INFINITI QX60's power liftgate is not functioning there are several simple reasons why this may be so. First consult Your owner's manual for the power hatch's fuse. Sometimes, a blown fuse will disable Your vehicle's trunk or hatch from opening. Secondly, a common problem experienced among QX60 owners involves the location of their cabin's electric liftgate's switch. The button to turn off the rear door's power is located under the driver's knee on the INFINITI's dash and it is sometimes accidently activated when it is bumped. Alternatively, Your intelligent key fob may need its battery replaced, the door's latch is broken or the motor is faulty. If all else fails, perform a reset of the INFINITI's gate if You can still open it conventionally by following these steps. Open the hatch with the button on Your intelligent key or use the switch. Pull the liftgate down, manually holding it in position while depressing the switch located on the door. The system will beep three times and the liftgate should be reset and perform correctly.
Hello from Saudi Arabia! I just saw this video and will try tomorrow in the daylight. I’ve been suffering from this for 4 years and I have been quoted $3,000. Thank you so much for this video!
Sharing is caring. You my friend is a prime example of that. I just went and did exactly what you explained and it worked right away. Really, you save me and many others money from mechanics who would take advantage of the situation and charge and arm and a leg. Thank you sir. Stay safe.
God bless you and your family. It’s just happened to me the same issue tonight and somehow I went to local mechanic to pull out the fuse and cleaned it up at the moment is working it is a magic. Looks like you saved a lot of money for us. Thank you once again , it was an amazing job you did. 😅😅😅😅😅❤❤❤
THANK YOU FOR THIS!!! Trying to find the location of the fuse online was painstaking enough. This helped tremendously. I did exactly was you did and it worked like a charm. Saved me time and money ($4.00 fuse remove) vs. ($xxx-$xxxx at the dealership).
So how do you stop the annoying beeping sound when the hatch is opening and closing? Sounds like a dump truck backing up. Very annoying especially in middle of night.
Originally when I pulled mine out on my 2013 JX35 and reset the fuse, it didn't work. So I got some compressed air, blew out the tray, took a small piece of sand paper, sanded the terminal pins a little bit, blew the tray out again, reset the relay, started the car up, opened the hatch from inside and finally operated the hatch from outside. Thanks for the assist! I really appreciate it!
I can’t explain how much stress & money your video just saved me! My trunk wouldn’t stay closed but i followed the steps & now it’s back working! Thank you sooooo much!
I am a Woman who saw your video on TH-cam & tried it on this Hot September day in Texas & and it worked precisely!!! Thank you so much for sharing the information.I really appreciate it. It certainly saved me time and Money.Keep sharing the information...this is what the World needs more of...you will be blessed.Thank you again.
Glad it helped!
I just had this happen and was ready to drop $150 on a used actuator and go through the pain in the ass process of installing it. I found this video, tried it, and it worked. So relieved that its working again. Thank you SO MUCH for saving me both time and money. You da man
Omg i can’t express how thankful I am about this video I am a single mom and I’ve been dealing with this issue for over two months nothing else on you tube for this procedure it works 🎉🎉 i have been putting off going to the dealership and all I did was exactly what you say i take it out clean it put it back and it works
Loved your video - very empowering, I do a lot of DIY but never thought I could access fuses in my engine. It turned out that my lift gate issue was not due to the fuse, but I still enjoyed your video and exploring the issue. I wanted to post and share with others what fixed my lift gate issue: apparently there is a "Power Door" on/off button down by the drivers knee that can get flicked on/off easily, I found this on Google and turning that button back on solved my problem.
If Your INFINITI QX60's power liftgate is not functioning there are several simple reasons why this may be so. First consult Your owner's manual for the power hatch's fuse. Sometimes, a blown fuse will disable Your vehicle's trunk or hatch from opening. Secondly, a common problem experienced among QX60 owners involves the location of their cabin's electric liftgate's switch. The button to turn off the rear door's power is located under the driver's knee on the INFINITI's dash and it is sometimes accidently activated when it is bumped. Alternatively, Your intelligent key fob may need its battery replaced, the door's latch is broken or the motor is faulty. If all else fails, perform a reset of the INFINITI's gate if You can still open it conventionally by following these steps. Open the hatch with the button on Your intelligent key or use the switch. Pull the liftgate down, manually holding it in position while depressing the switch located on the door. The system will beep three times and the liftgate should be reset and perform correctly.
Great video, took me less than a minute after watching your video to fix the problem. Thank you so much.
Thank you for the video, that was helpful in my case
wow you are genius, it works. I just had this problem, watched you and I could fix it myself. So much appreciated to you. Kim
Muchas gracias me sirvió y pude arreglar el problema 🎉
Hello from Saudi Arabia! I just saw this video and will try tomorrow in the daylight. I’ve been suffering from this for 4 years and I have been quoted $3,000. Thank you so much for this video!
I’m glad I could help.
Thank you so much I did it with my 2015 nissan pathfinder platinum and it works.
Sharing is caring. You my friend is a prime example of that. I just went and did exactly what you explained and it worked right away. Really, you save me and many others money from mechanics who would take advantage of the situation and charge and arm and a leg. Thank you sir. Stay safe.
THANK YOU SO MUCH!!
Thank you for this video. It saved me a trip to the dealer.
You just saved me $$$$!! It worked on my 2014 Nissan Pathfinder. Thank you for sharing!
Did something similar. Just pulled it out and looked at it. Put it back in and it works just fine
This fix worked on my brother’s QX60. Thanks.
God bless you and your family. It’s just happened to me the same issue tonight and somehow I went to local mechanic to pull out the fuse and cleaned it up at the moment is working it is a magic. Looks like you saved a lot of money for us. Thank you once again , it was an amazing job you did. 😅😅😅😅😅❤❤❤
Thanks brother I was having the exact same issue and couldn't figure it out I appreciate you saving me a trip to the dealership
Thank you Fritz, appreciate this video. Definitely saved me a few hundred dollars.
THANK YOU FOR THIS!!! Trying to find the location of the fuse online was painstaking enough. This helped tremendously. I did exactly was you did and it worked like a charm. Saved me time and money ($4.00 fuse remove) vs. ($xxx-$xxxx at the dealership).
Thank you!!!! This worked on my 2016.
You have no idea how much you have saved me!! Thank you very very much!!!
Glad I could help!
Thank you so much for that tutorial it help us and save us a lot of money. Thank you.
You’re welcome
Thanks, just did it and saved me from going to the dealership
I 'm grateful to you. It worked for me.
You're welcome!
Thanks a lot for sharing. You saved me a trip to the dealership lol.
Man thank you for this because I was scratching my head trying to figure this out. I wonder why this happens 🤔
ty my browa!
Thanks for sharing! I really appreciate it!!!!
Great video. Thanks.
Glad you liked it!
So how do you stop the annoying beeping sound when the hatch is opening and closing? Sounds like a dump truck backing up. Very annoying especially in middle of night.
Anyone have a 2019 with this issue?
My husband tried but it didn’t fixed it 😢
I’m sorry. Make sure the terminals are clean.
Originally when I pulled mine out on my 2013 JX35 and reset the fuse, it didn't work. So I got some compressed air, blew out the tray, took a small piece of sand paper, sanded the terminal pins a little bit, blew the tray out again, reset the relay, started the car up, opened the hatch from inside and finally operated the hatch from outside. Thanks for the assist! I really appreciate it!