Ford Focus (2005 - 2011) Diesel - Replace the thermostat
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Do you need to Replace the thermostat on your Ford Focus (2005 - 2011) Diesel Diesel but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Ford Focus (2005 - 2011) Diesel manual covers the diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-...
What's covered:
Diesel:
Ford Focus Estate 1.6 litre (1560 cc) (2005 - 2011)
Ford Focus Estate 1.8 litre (1753 cc) (2005 - 2011)
Ford Focus Estate 2.0 litre (1997 cc) (2005 - 2011)
Ford Focus Hatchback 1.6 litre (1560 cc) (2005 - 2011)
Ford Focus Hatchback 1.8 litre (1753 cc) (2005 - 2011)
Ford Focus Hatchback 2.0 litre (1997 cc) (2005 - 2011)
Ford Focus Saloon 1.6 litre (1560 cc) (2005 - 2011)
Ford Focus Saloon 1.8 litre (1753 cc) (2005 - 2011)
Ford Focus Saloon 2.0 litre (1997 cc) (2005 - 2011)
Exclusions:
Does NOT cover CVT, Powershift or automatic transmission. Does NOT cover features specific to C-Max or CC (Convertible) models.
Thank you for the great video!
Great video, Is the 2012 focus similar layout to this please ?
Thank you for the video. It helps me a lot to do this job.
Glad it helped
Me too. Very helpful. Thank you very much.
Superbly explained
Thank you!
Thanks the video is very rich in details, thnks so much
You are welcome
What about the 1.8 TDCI version?
focus 1.6 tdci if radaiator fan dont kick in what could it be ?
Whether it is necessary to bleeding the cooling system and how to do it? Thanks
Yes, the cooling system will require bleeding after refilling. There's a bleed point on the EGR valve at the back of the engine. Full details in our manual!
Good video thenks
No problem 👍
Thank you.
You're welcome!
Frumos multumim
You're welcome!
so you only add new coolant in the expansion tank not in the radiator?
The video is correct for UK models - US models may be different
Are the front bolts you refer to, nearest to the radiator?. Just to make sure.
Yes, all references to front, rear, left and right are from the drivers seat
I have been looking everywhere for a video like this as i'm doing the same on my Mk6.5 Fiesta 1.6 tdci and it has the same type of thermostat housing in the exact location. I haven't started to do mine yet as i could not figure out how to take of the hose with the white band around it and the thinnest hose with circlip which you just twisted off. Now i know.
I want to also flush the engine and heater matrix/core along with the radiator on my car but i don't know which hose i should direct a flow of water into, to flush the engine so to see the water coming out of the bottom hose. This the last bit for me to work out now out before i start. Any help appreciated.
The easiest way is to flush the engine, radiator and heater matrix separately. If you remove the thermostat housing and bottom hose from the radiator, you should be able to flush the engine, then the radiator. All you need to do then is disconnect both heater hoses at the engine compartment bulkhead and flush the matrix. Be prepared for fluid spillage!
@@HaynesManuals
Do i insert garden water hose into the top radiator hose after disconnecring it from the radiator to flush the engine.
Yes, after you've removed the thermostat housing
@@HaynesManuals
If i disconnect the thermostat, i dont know which hose is the top one anymore. Nearest the firewall, there are two hoses. One has a white band around it which is the hose release tab and the other has no markings or any tab or clip and is a platic push fit hose. So out of the two , which is the top hose please.
Thank you
You're welcome
Thank you 👍
You are welcome
How many liters of liquid go into the system? thank you
1.6L: 7.3L coolant, 1.8L: 8.1L coolant, 2.0L: 8.4L coolant
@@HaynesManuals I have a Ford Focus 1.6 TDCI, 80 kW, 109 horsepower...
Thank you a lot for this video !
I got to find the location of the ECT on a Ford Focus 2008, and your video is on point ^_^
It's well explain :-)
Glad it helped!
Super!!!
Thanks!