On m’y R69S, there are 6 spacers between the pressure plate and the outer pressure ring. Very difficult to install with this method. I found that the three bolts are not necessary for reinstalling the clutch. The flat head screws can be installed directly.
Hi, Seroj, I have a doubt doubt! around 1:55, before breather plate you set a flat and wave washer, but instead of them, in the bmw diagram there is a spring, and a cover disc for engine breather, and after the breathe plate an snap ring. I'm confused. Is this a modification for later models? What's the right set?
On m’y R69S, there are 6 spacers between the pressure plate and the outer pressure ring. Very difficult to install with this method. I found that the three bolts are not necessary for reinstalling the clutch. The flat head screws can be installed directly.
Hi, Seroj, I have a doubt doubt! around 1:55, before breather plate you set a flat and wave washer, but instead of them, in the bmw diagram there is a spring, and a cover disc for engine breather, and after the breathe plate an snap ring. I'm confused. Is this a modification for later models? What's the right set?
@@RAYMONDWheel earlier models used the spring and snap ring.
@@serojterian Mine is from 1968. I will assembly this like you did. Thanks for teach and share your skills.