Now THAT is how a DIY video should be done. No horrible background music, all video fast forwarded, with succinct voice-over instructions and explanations--and no extraneous, "I-love-to-hear-myself-talk," chatter. Perfect. Bravo--and don't change your instructional style one bit.
Good job! Really creative and functional. You inspired a 50 year old to try something new. Guys like you create businesses and change the world, keep it up!
I literally applaud hard when I saw he used the old bed frame, I used an old bed frame to do part of a front bumper. Immediately I subscribed of course :)
Different style compared to the one I made, I really like how you made the door with the angle iron, its strong, seals nicely, and most important on these is its not at all "finicky". On builds like these its important to build things in a old military concept where the words "simple" and "functional" are key, and you have achieved this nicely with your build.
Have been collecting old LPG bottles from a filling station, they just give them to me. Time to go into production. I will be adding a coil, and making hot water heaters as well. Your vid was my reminder, thinking about it isn't doing it. Thanks for the encouragement to get my ass in gear. Great little vid.
I built mine upside down of yours, utilizing the threaded hole to add a pipe thru the floor. it not only supports the stove, but is the air intake. I then added a piece of 1/4" all thread with washers on the end as a air control valve. connected a wire coat hanger to the end of all thread at bottom, up thru the floor so i can adjust and also shake to let ash go out. Nice job on yours.
Look dude even gave you a heart damn that's pretty special I'm a retired boilermaker local 105 20 years high pressure to welding 6G with in canal thank you but I like it hard it's pretty sweet really see I have a heart too I'm not a total asshol
Agree! There is no way in hell I would be able to do this. This is what's going to make all the difference when the time comes. You can be book smart, BUT having a good skill set is going to prove to be invaluable.
That's one of the best recycling jobs of a 20 gallon propane tank, I have ever saw. I've been running ideas around in my head for a wood stove in my she-shed. Thanks for sharing your build with us, turned out great!
"She-shed" - my first encounter with the term. I like it. I take it that's a counterpart to "man cave", and may someday dare apply it to my wife's craft /sewing rooms.
@@stephenandloriyoung5716 Your assumption is correct about the she-shed. Mine is an old gardening shed that we've added some new touches, needed repairs, improvements.
Absolutly beautiful!!!! I learned a few tips from this video and I’ve made over a dozen different wood stoves from various sized propane tanks. I’ve even made larger stoves by welding some old propane tanks together. A few tips if I may add…. Adding an air intake lower on your next stove, produces a better burn and heat control. That way the air intake flow is lower near the base of the stove, forcing air up through the fire and getting a more complete burn, as well as an easier burn. Number two: the exhaust I believe is a little too big as it allows too much heat to escape. The exhaust should be no larger than 1.25 X’s the size of the air intake. This also allows a hotter flame to produce more heat if needed. As for sanding or grinding off any residual paint, that is unnecessary and only adds extra work. Just light it before painting it black and all the paint will burn off. Once the stove is cool, lightly sand with a wire brush and then you can paint it with black high-temperature paint. However in due time, even that paint will burn off and if left untreated, the entire stove will rust. However that’s OK because the rust makes it look cool and the stove will continue to last for years and years as long as you keep it covered when not in use. Again excellent stove you made and I like some of your ideas and techniques. Im am going to use your cut out techniques, like the roll of duct tape to measure a hole, but agin I’d make my exhaust hole smaller. Also bro, you really need a plasma AND an oxy-fuel cutting torch. It makes life so much easier.
Those are some great points actually, I’ll definitely keep those in mind for my next build. Nice to hear from someone else doing the same thing. Also ya, I’d definitely like a plasma and oxy-fuel curing torch, pretty expensive though but something I’d like in the future, been checking Craigslist as well. Thanks for the feedback, check out some of my other videos for more crafts and carpentry
Looks like a really nice design. It's a good size for a small cabin or wall tent. I'm wondering if the fire would burn hotter if the air intake was mounted lower, where the base of the fire is. Another feature you may consider is a circular grate fitted to sit just below the level of the door opening. It would be made of heavy duty rod to support the wood. It would allow air to flow underneath and provide a level area on which to build the fire.
You sound pretty young, I'm really impressed of your product if only 30 percent of young kid's today had your will this definitely would be a better world.
Very nicely designed and built. I like it. You could wind some heavy gauge wire for the two handles and cut the protruding metal rods shorter and install the the spring like wire over the rods. That way they would never get hot and look great as well. But nice project. Thumbs Up!
Nicely done. To beef up this stove furthermore just weld a few bars inside to act as a crate. It’ll help separate ash from logs during mid-burn and be a lot easier to clear away ash too. Great idea
Nice stove, remember to install the chimney sections just like a rain downspout, so if you have any liquid creosote condense inside, it will drip into the stove rather than leak out the stove pipe.
I learner on youtube and with $150 dollars of equipment from Craigslist. Seem intimidating at first but you’ll learn faster then you think! Thanks for watching.
It's not that hard. I learned at college in my 30's. It's an amazingly easy skill. It just takes $$ to get the welding supplies started. But Easy enough for most people. ALWAYS EYE PROTECTION!!! ALWAYS GLOVES AND CLOTHING PROTECTION!
I have watched a few of these and love how you made yours. I will be looking at building mine a lot like yours and doing a few things that I would like to see on mine. Excellent job, great voice over explaining the detail enough to understand and not making it a 30 min video. 5 stars all around.
If it helps anyone get some ideas, I always use large diameter iron pipe for chimneys on homemade stoves. When I was in high school, we moved into a house that was built in 1973 and we were going to renovate. The main heat source was a woodstove and the conventional thin wall chimney pipe rotted through and leaked a few weeks after moving in, we woke up to this at like 2 am. Ever since then I try to do a DIY version with well pipe of the same diameter, it will literally last as long as the stove and it is much more forgiving to rough cleaning.
@@rafaelellis-rech6950 I would use flat bar stock, form it into the circle, or an oval? yes oval.... like vintage stoves, then weld to center, or towards the rear, hint hint, for the pipe to be in the back, you can make a plate directly on top to cook on, or keep coffee in? or water to keep humidity up with. yes stove pipe will bend to fit the vintage oval connectors.
You know, I've got an obsolete propane tank in the garage that nobody knows what if came off. Some old old old grill is my best guess. Never threw it out or recycled it because I thought I might use it for something some day. Good project for cold winter in the garage. Thanks for the video! Great job!
Tis I again. Apologies for my negative input last time. Must've been in a grumpy mood. but due to your reply Ive watched your video again, twice!! The way you've constructed your door frame is so much easier than the way Im attempting. Im constructing my door frame out of wood initially as its easier to correct mistakes in preparation for using steel. Im hoping to include a glass insert to the door as well. Thanks for the info.
Good luck with your build! The door has held up pretty well and seals nicely after adding a gasket. Adding some glass would be awesome but I haven’t gotten to that yet.Thank for watching.
Very nice build - I have found with my shop stoves that the stove pipe needs to be replaced every few years so its a good idea to have the first section nice heavy steel that the pipe can slide down into. If the bottow section of pipe is not welded it will be easy to replace. Keep making these videos - you're doing a good job.
Nice job! That’s a great little stove and looks really cool. There are two little things that will make it work way more efficiently and are very simple… a grill of some sort to keep the wood from laying on the bottom and a damper to control the air flow in the chimney… they will both make a huge difference in the amount of heat and the performance of the stove using way less wood. Nicely done BTW and looks great!
Adding a heat exchange to the chimney pipe would greatly increase the heating ability. To build your own, weld between 11 and 14 conduit pipe into a 10" box horizontally and a 6" stove pipe adapter vertically,-top and bottom- "Note all welds on this part must seal." Weld a Mounting bracket for a small fan at one end of the conduits.
I love this little stove--You have an unique skill that shines and with the way our economy is going right now your skill may be need more than you know! Keep up the good work!!!
Great job and thanks for sharing. Love the tabs you cut and bend to make things fit. Only change I would recommend is making the ash drop larger/different design. Maybe a grate you pull thru a slot. Dem threads gonna be a beeotch after getting hot a few times.
That’s a good idea the threads have been getting worse every use! I think theres a couple change I would make if I was to do it again but overall I’m happy with how it turned out. Thanks for watching!
Bought new one exchanged from old one Skipped most of your vedio n blew up my barn while using my torch rig luckily I still have 1 eye 1 arm n didn't burnt my barn to bad😁
Love the door! I'm going to attempt to copy your build, and set the propane tank inside a metal drum. Also add a fan to the back of the drum. Very well done! Thank you
At my high school these were the standard stoves for in-room heating. They work better as a stove if made horizontal rather than vertical. You can get a larger piece of wood in there that way and a much better bed of coals if you need heat to last through the night.
I built one of these for a bread truck Rv that I built, mine was similar but different, my air intake was the same concept but I mounted it lower and used black pipe and a 2” ball valve to control air. A baffle goes a very long way to ensure that more heat and flame stays in the stove vs in the stove pipe. You’ll find that the fire doesn’t burn super efficiently unless you install a grate so fresh air can access the underside of the fire. Also I used 3 or4 inch chimney pipe so I could install a 3/4 thick piece of steel as a cook top! Great stove kept me warm in the winter for several years. Coal burned extremely well in my rig
That is beautiful! So artistic abd funcrional! Plus very cool that you used available materials whi h is essentially recycling! Or in this case upcycling! I wish I had your skills! God bless you and everyone!🤗🕊🔥💖✝️💕❣
@@rafaelellis-rech6950 Amen! And to have them look so much better! To create something of beauty and function out of stuff that lots of people consider to be trash! It's been said that one man's junk is another man's treasure. In your case that's certainly true! May the good Lord bless you as you use your skllls to bring beauty into this world! In Jesus's mighty name I pray!🤗🕊🔥💖✝️💕❣
I made one a couple years ago, and it does very well in my 20x30 shop. I got away with 3-inch flue pipe, but I do get a smidge of backdraft smoke before it develops a draft. You took more care making yours, so it is quite nice. Plans I would tend to follow if making another one.
I have seen someone use two water heaters (laying down and one on top of the other )to heat their shop , it could take 3' logs and the top tank was just a heat chamber.
This fire pit is one of a few covered pits that is on the list th-cam.com/users/postUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM of approved products for Disney Fort Wilderness. The product served its purpose well and provided excellent fires throughout the evening. We were able to open the door and do s'mores, but I had to be careful because the handle was a bit hot on occasions. Additionally, I wish they had replaced some of the standard nuts with lock nuts in some places. We lost the door handle after just a couple of days of usage. Not a deal breaker, just a recommendation. I still give it 5 stars.
@@the_original_skytiger No, Why isn’t it or wouldn’t it be possible to be used as a portable unit? Hollowed out or pretty much hollowed out with the exception of some extra small pieces of metals used in making the stove. an empty standard propane tank weighs about 17lbs subtract or plus a couple pounds with or without various added and or subtracted bits and pieces of metal and welds the stove should still retain an average pound rating in the neighborhood of 14LB-22LB which isn’t all that heavy to be honest GENIUS 🤥🙄🤭
@@the_original_skytiger Stay blind to the possibilities. If you can load it into a vehicle, it is portable. anything you can do to facilitate that is a benefit....genius?
I have much respect for fellow craftsmen and the art of a craftsmanship. I love seeing young men with a skill set that they work on perfecting. Let's face it, today's younger generations could use more mature and manly younger men.
Hey this guy is good that's a very smart idea good worker he gets a lot of credit just think he should go in to business I would buy one all this takes time and effort and hard work good job I don't know where he is but I would buy one from him bless his heart
Great job! I watched the whole thing without skipping ahead! I like your design, but a little small. Ever think of using a well pressure tank instead of propane tank?
I've built many of these, just have a suggestion for you specially since you're using 6" pipe, weld a flame deflection plate inside to keep flames from going up the pipe this will also hold more heat in the stove.
Nice Build and a couple of suggestions. Before you cut out the front for glass....Consider cutting out a design with the torch. Ya Know like carve some trees, maybe a cowboy, some Indian Motif, a wolf or even some flames coming up from the bottom. Then lay the glass. Also ...... does the vent on the side make more smoke come out the Front.
That’s a cool idea for the glass! I don’t have a plasma cutter but I am thinking about investing in one and it would be great for making some nice designs. Haven’t had any issues with smoke coming out the front the chimney being so big provides a lot of draft that pulls all the smoke pretty well.
This is awesome, very nice job, I would love one of those! Would you add a small metal grate on the inside to help save the coals when emptying, and to get a little better efficient burn? Really good job here :)
Yes adding a grate would be a great idea haha! I would make the clean out different as the threads have gotten pretty sticky over heating and cooling cycles.
Some 1” Angle Iron welded into a rectangle on top,with 1/8” sheet on top of that would give a nice,strong,flat surface for warming up parts,cooking,heating Water…whatever 😎
That is so cool! I have a barn with a lean-to that that I use is a porch, was looking for an economical way to get some local heating. One man's trash is another man's treasure!
As an Upcycle Seamstress. I Love this. I upcycle all sorts of things into others. So many pieces of 2nd hand fodder is great for Wonderful New life projects from clothing to pillows to handbags. So much can be recycled/Upcycled.
Nice ! I like how you made it with stuff you had on hand. your style making the video is spot on. Good Job. Im going to watch some more of your vids. Keep them coming
You could easily unscrew the cap with a pipe wrench; slide a tray under the stove, wrench the cap off, brush ash out of stove, replace cap finger tight.
Great job, young man. Make sure you put a small grate in it to keep your firewood off the bottom, that will let the ash fall to the bottom and that will help it breathe
I agree they’re great sources of metal, you can get a lot of good stuff if you keep your eyes open. Check out some of my other videos if you liked this one. Thanks!
DangerDaveFreestyle I use a baffle to adjust the draft to a point where it works pretty well for me. The pipe is large but I wanted to use it to allow me to use all standard stove pipe parts. Thanks for watching!
Now THAT is how a DIY video should be done. No horrible background music, all video fast forwarded, with succinct voice-over instructions and explanations--and no extraneous, "I-love-to-hear-myself-talk," chatter. Perfect. Bravo--and don't change your instructional style one bit.
robertllr thank you appreciate the positive feedback!
And no misleading video thumbnail!
@@mlb6d9 Gawd I despise those thumbnails. That HOLY-CRAP-IT'S-THE-CRAACRAZY-LUNACY-YOU-WON'T-KNOW-WHY-TILL-YOU-CLICK!-CLICK!-CLICK!
It was a good video. Too bad the design was terrible and impractical to use
@@thenewyorker0042please elaborate.
Nice to see a young men getting out and doing these type projects instead of sitting on a video game!!! Good job young man!!!👍👍
brings back old school youtube DIY vibes great video
Reduce, reuse, recycle. Excellent use of on hand materials. Simple but effective. Very well done.
Thanks for watching. Working with what you have often help create more interesting inventions!
Beautiful! I loved how you walk us through the building process - not just how-to but why.
This is the greatest diy I don't even got words This cat should be in Hollywood the way he cuts out the bs and hits the heart
Wow! That’s amazing! All I need now is a welder, skills, time, and a cabin to put it into.
Pretty Brilliant! Love the idea of using what you have not buying all new. You thought of everything and planned it out beautifully.
Deanna Stevens thank you!!
Good job! Really creative and functional. You inspired a 50 year old to try something new. Guys like you create businesses and change the world, keep it up!
Thanks for the kind words!
I literally applaud hard when I saw he used the old bed frame, I used an old bed frame to do part of a front bumper. Immediately I subscribed of course :)
Haha thanks for watching! Bed frames are an awesome source of free or really cheap angle iron!
That earned my sub as well cuz I use old bed frames for art types of different things when I bought my cheap oil flux welder..
@@rafaelellis-rech6950 oh yeah! Got a few feet of 1 x 1 x .125 bedframe in my shop too.
I found a small bed frame at a rock quarry. I took it home and now I'm making a garden trailer out of it with old motorcycle wheels.
Garry Dufford it’s good stuff comes in handy all the time and free is always a good price!
Different style compared to the one I made, I really like how you made the door with the angle iron, its strong, seals nicely, and most important on these is its not at all "finicky". On builds like these its important to build things in a old military concept where the words "simple" and "functional" are key, and you have achieved this nicely with your build.
Very good observation 😊✌
Thank for watching! The angle iron made it easy to add a door gasket and get an air tight seal!
Have been collecting old LPG bottles from a filling station, they just give them to me. Time to go into production. I will be adding a coil, and making hot water heaters as well. Your vid was my reminder, thinking about it isn't doing it. Thanks for the encouragement to get my ass in gear. Great little vid.
Thank you!! I’m glad if I was able to inspire some action. Good luck with your builds!
Very nice work, Rafael. Very nice and creative. I see dollar signs with that creation!!!
Thank you check out some more videos of mine if you have time!
@@rafaelellis-rech6950 You're welcome! I will check out more of your videos.
I built mine upside down of yours, utilizing the threaded hole to add a pipe thru the floor. it not only supports the stove, but is the air intake. I then added a piece of 1/4" all thread with washers on the end as a air control valve. connected a wire coat hanger to the end of all thread at bottom, up thru the floor so i can adjust and also shake to let ash go out. Nice job on yours.
Good call, sounds like a cool build! Thanks!
Very nicely done, sir. You are creative and your fabrication skills are impressive.
Chuck RF150 Thank you!
Lol pitiful. If that's impressive project I'm here I'll send you some videos
Look dude even gave you a heart damn that's pretty special I'm a retired boilermaker local 105 20 years high pressure to welding 6G with in canal thank you but I like it hard it's pretty sweet really see I have a heart too I'm not a total asshol
Agree! There is no way in hell I would be able to do this. This is what's going to make all the difference when the time comes. You can be book smart, BUT having a good skill set is going to prove to be invaluable.
@@thetattooedguy1413 never too late to learn new skills
That's one of the best recycling jobs of a 20 gallon propane tank, I have ever saw. I've been running ideas around in my head for a wood stove in my she-shed. Thanks for sharing your build with us, turned out great!
"She-shed" - my first encounter with the term. I like it. I take it that's a counterpart to "man cave", and may someday dare apply it to my wife's craft /sewing rooms.
Try saying she shed 20 times really fast! Lol
@@stephenandloriyoung5716 Your assumption is correct about the she-shed. Mine is an old gardening shed that we've added some new touches, needed repairs, improvements.
Great winning attitude. Thank you for taking us through your awesome walk through. Cool, no HOT!
Thanks for watching!
Awesome video, and build. No annoying music, very thorough. I'll be trying one of these soon. Thanks for the great idea
Good luck with your build!
Your work is *very* well done. I'm very impressed with the quality of you cuts & welds - kudos!
Thanks for watching! If you have time check out my other videos!
Absolutly beautiful!!!! I learned a few tips from this video and I’ve made over a dozen different wood stoves from various sized propane tanks. I’ve even made larger stoves by welding some old propane tanks together. A few tips if I may add…. Adding an air intake lower on your next stove, produces a better burn and heat control. That way the air intake flow is lower near the base of the stove, forcing air up through the fire and getting a more complete burn, as well as an easier burn. Number two: the exhaust I believe is a little too big as it allows too much heat to escape. The exhaust should be no larger than 1.25 X’s the size of the air intake. This also allows a hotter flame to produce more heat if needed. As for sanding or grinding off any residual paint, that is unnecessary and only adds extra work. Just light it before painting it black and all the paint will burn off. Once the stove is cool, lightly sand with a wire brush and then you can paint it with black high-temperature paint. However in due time, even that paint will burn off and if left untreated, the entire stove will rust. However that’s OK because the rust makes it look cool and the stove will continue to last for years and years as long as you keep it covered when not in use. Again excellent stove you made and I like some of your ideas and techniques. Im am going to use your cut out techniques, like the roll of duct tape to measure a hole, but agin I’d make my exhaust hole smaller. Also bro, you really need a plasma AND an oxy-fuel cutting torch. It makes life so much easier.
Those are some great points actually, I’ll definitely keep those in mind for my next build. Nice to hear from someone else doing the same thing. Also ya, I’d definitely like a plasma and oxy-fuel curing torch, pretty expensive though but something I’d like in the future, been checking Craigslist as well. Thanks for the feedback, check out some of my other videos for more crafts and carpentry
Looks like a really nice design. It's a good size for a small cabin or wall tent. I'm wondering if the fire would burn hotter if the air intake was mounted lower, where the base of the fire is. Another feature you may consider is a circular grate fitted to sit just below the level of the door opening. It would be made of heavy duty rod to support the wood. It would allow air to flow underneath and provide a level area on which to build the fire.
Thanks for watching I think those all wood be good ideas. If I was going to build it again I would definitely make some of those changes.
Had the same idea!
You sound pretty young, I'm really impressed of your product if only 30 percent of young kid's today had your will this definitely would be a better world.
Very nicely designed and built. I like it. You could wind some heavy gauge wire for the two handles and cut the protruding metal rods shorter and install the the spring like wire over the rods. That way they would never get hot and look great as well. But nice project. Thumbs Up!
Love it!!! I would weld some large washers to the bottom rebar for looking a nice foot. You get the prize! Fantastic job.
Found this so easy and comprehensive, motivated me to build my own
Good luck with the project would love to see how it comes out!
Very nice. I love using old stuff and making new stuff. Rock on.
Always fun Turing junk into something you can use! Thanks for watching.
Wow, very informative! My
wood stove turned out great. Thanks for the help!
Great video and great design. I love the creativity in the video and the comment section with improvements that can make for an excellent stove
Nicely done. To beef up this stove furthermore just weld a few bars inside to act as a crate. It’ll help separate ash from logs during mid-burn and be a lot easier to clear away ash too. Great idea
Great idea thanks for watching the video!!
Grate *
That was excellent I like the speedup and I still can figure out what you did…Bravo !
Thanks for watching the video. I have some other out as well!
Very nicely done ! I enjoy repurposing materials and this is great to see.
Thanks for watching. Love turning trash to treasure!
Nice to see a young guy building things!!!
Nice stove, remember to install the chimney sections just like a rain downspout, so if you have any liquid creosote condense inside, it will drip into the stove rather than leak out the stove pipe.
Yeah I had an issue with that because of how I welded in the mating piece of stove pipe but used some sealant and it’s held up pretty well!
Lots of good ideas. A steel chipping hammer with spring handle makes a nice lever type door handle. Thanks for the video
Thank you! Check out my other videos for more crafts if you liked this one, thanks!
Well I guess I need to learn to weld. Thank you what a great idea and so well presented, awesome!
I learner on youtube and with $150 dollars of equipment from Craigslist. Seem intimidating at first but you’ll learn faster then you think! Thanks for watching.
It's not that hard. I learned at college in my 30's. It's an amazingly easy skill. It just takes $$ to get the welding supplies started. But Easy enough for most people. ALWAYS EYE PROTECTION!!! ALWAYS GLOVES AND CLOTHING PROTECTION!
@@rafaelellis-rech6950 can you give some advice on where to buy cheap welding equipment? what im looking for etc?
What a GREAT JOB! you will certainly go far with your crafty Ness. It's sure is lacking with most people these days... Job well done
If you laid it on its side, it would be more efficient and not burn up so fast, that’s why boilers are horizontal, FYI
I am completely blown away. Nicely done!
Mimi Milan Thank you!
The only thing I would add is a flat place for a coffee pot
Frank Creamer Good idea thank you!
Good add idea.
A piece of angle iron welded on the side big enuff for the coffee pot would do...
I have watched a few of these and love how you made yours. I will be looking at building mine a lot like yours and doing a few things that I would like to see on mine. Excellent job, great voice over explaining the detail enough to understand and not making it a 30 min video. 5 stars all around.
Thank you! Good luck with your project
If it helps anyone get some ideas, I always use large diameter iron pipe for chimneys on homemade stoves. When I was in high school, we moved into a house that was built in 1973 and we were going to renovate. The main heat source was a woodstove and the conventional thin wall chimney pipe rotted through and leaked a few weeks after moving in, we woke up to this at like 2 am. Ever since then I try to do a DIY version with well pipe of the same diameter, it will literally last as long as the stove and it is much more forgiving to rough cleaning.
That’s a good idea wish I had some thicker material for the stove pipe I think it would have worked better because the 6 inch was to large!
@@rafaelellis-rech6950 I would use flat bar stock, form it into the circle, or an oval? yes oval.... like vintage stoves, then weld to center, or towards the rear, hint hint, for the pipe to be in the back, you can make a plate directly on top to cook on, or keep coffee in? or water to keep humidity up with. yes stove pipe will bend to fit the vintage oval connectors.
You know, I've got an obsolete propane tank in the garage that nobody knows what if came off. Some old old old grill is my best guess. Never threw it out or recycled it because I thought I might use it for something some day. Good project for cold winter in the garage. Thanks for the video! Great job!
Good luck with the project! And thanks for watching!
Great video, really enjoyed it! I enjoy making stuff with what I have on hand, kudos on using the bed frame, and I like your design on the air baffle.
Tis I again.
Apologies for my negative input last time. Must've been in a grumpy mood. but due to your reply Ive watched your video again, twice!!
The way you've constructed your door frame is so much easier than the way Im attempting. Im constructing my door frame out of wood initially as its easier to correct mistakes in preparation for using steel. Im hoping to include a glass insert to the door as well. Thanks for the info.
Good luck with your build! The door has held up pretty well and seals nicely after adding a gasket. Adding some glass would be awesome but I haven’t gotten to that yet.Thank for watching.
Very nice build - I have found with my shop stoves that the stove pipe needs to be replaced every few years so its a good idea to have the first section nice heavy steel that the pipe can slide down into. If the bottow section of pipe is not welded it will be easy to replace. Keep making these videos - you're doing a good job.
Nice job! That’s a great little stove and looks really cool. There are two little things that will make it work way more efficiently and are very simple… a grill of some sort to keep the wood from laying on the bottom and a damper to control the air flow in the chimney… they will both make a huge difference in the amount of heat and the performance of the stove using way less wood. Nicely done BTW and looks great!
Well done sir. I liked the speed of the video too.
Nice work. I particularly like the ash disposal hole at the bottom.
Thanks I would do a slider if I did it again the threads get sticky after a lot of cycling!
Adding a heat exchange to the chimney pipe would greatly increase the heating ability. To build your own, weld between 11 and 14 conduit pipe into a 10" box horizontally and a 6" stove pipe adapter vertically,-top and bottom- "Note all welds on this part must seal." Weld a Mounting bracket for a small fan at one end of the conduits.
U should make a video also for ppl like me that don't really know what ur talking about
Awesome work! You should make more and sell them! I would buy one for sure ! Great job!
I love this little stove--You have an unique skill that shines and with the way our economy is going right now your skill may be need more than you know! Keep up the good work!!!
Thanks for watching the build!
I really like how this is made and the materials you used. Keep it simple, and down to earth. Thanks man.
Thank you!! Reusing materials is the best way to do it.
Great job and thanks for sharing. Love the tabs you cut and bend to make things fit. Only change I would recommend is making the ash drop larger/different design. Maybe a grate you pull thru a slot. Dem threads gonna be a beeotch after getting hot a few times.
That’s a good idea the threads have been getting worse every use! I think theres a couple change I would make if I was to do it again but overall I’m happy with how it turned out. Thanks for watching!
Bought new one exchanged from old one Skipped most of your vedio n blew up my barn while using my torch rig luckily I still have 1 eye 1 arm n didn't burnt my barn to bad😁
Good clean product. This shows what a few cups of coffee can do to improve productivity.
Thank you for watching!
Excellent project design and improv skills. Great video!
That is really cool. I could use one of those in my cabin. Subbed
Donnie Greathouse Works great for small spaces! Thanks for watching and excited to have you on board for more fun projects.
Love the door! I'm going to attempt to copy your build, and set the propane tank inside a metal drum. Also add a fan to the back of the drum. Very well done! Thank you
Cool hope it works out well for you!
VERY innovative - nice “field expedient” build. Thank you!!!
At my high school these were the standard stoves for in-room heating. They work better as a stove if made horizontal rather than vertical. You can get a larger piece of wood in there that way and a much better bed of coals if you need heat to last through the night.
@@earthknight60 perfect for a 20lb bottle.
I built one of these for a bread truck Rv that I built, mine was similar but different, my air intake was the same concept but I mounted it lower and used black pipe and a 2” ball valve to control air. A baffle goes a very long way to ensure that more heat and flame stays in the stove vs in the stove pipe. You’ll find that the fire doesn’t burn super efficiently unless you install a grate so fresh air can access the underside of the fire. Also I used 3 or4 inch chimney pipe so I could install a 3/4 thick piece of steel as a cook top! Great stove kept me warm in the winter for several years. Coal burned extremely well in my rig
That is beautiful! So artistic abd funcrional! Plus very cool that you used available materials whi h is essentially recycling! Or in this case upcycling! I wish I had your skills! God bless you and everyone!🤗🕊🔥💖✝️💕❣
Thank you for watching. Using recycled items is always a lot of fun!
@@rafaelellis-rech6950 Amen! And to have them look so much better! To create something of beauty and function out of stuff that lots of people consider to be trash! It's been said that one man's junk is another man's treasure. In your case that's certainly true! May the good Lord bless you as you use your skllls to bring beauty into this world! In Jesus's mighty name I pray!🤗🕊🔥💖✝️💕❣
I made one a couple years ago, and it does very well in my 20x30 shop. I got away with 3-inch flue pipe, but I do get a smidge of backdraft smoke before it develops a draft. You took more care making yours, so it is quite nice. Plans I would tend to follow if making another one.
I have seen someone use two water heaters (laying down and one on top of the other )to heat their shop , it could take 3' logs and the top tank was just a heat chamber.
Cool project! Good job, I need to learn how to weld for sure.
It’s a great project to start with don’t have to feel bad about wasting materials! I recommend looking for some used equipment.
Awesome Video, and I like the way you stayed on a budget. Very good, you should be proud of this. You did an excellent job.
This fire pit is one of a few covered pits that is on the list th-cam.com/users/postUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM of approved products for Disney Fort Wilderness. The product served its purpose well and provided excellent fires throughout the evening. We were able to open the door and do s'mores, but I had to be careful because the handle was a bit hot on occasions. Additionally, I wish they had replaced some of the standard nuts with lock nuts in some places. We lost the door handle after just a couple of days of usage. Not a deal breaker, just a recommendation. I still give it 5 stars.
This clearly proves that it's not enough to just have the tools. You need vision, innovation, and creativity.
Thank you
I love the simple design. I suggest adding a carrying handle, to make it more portable
lol It ain't portable genius.
@@the_original_skytiger No, Why isn’t it or wouldn’t it be possible to be used as a portable unit? Hollowed out or pretty much hollowed out with the exception of some extra small pieces of metals used in making the stove. an empty standard propane tank weighs about 17lbs subtract or plus a couple pounds with or without various added and or subtracted bits and pieces of metal and welds the stove should still retain an average pound rating in the neighborhood of 14LB-22LB which isn’t all that heavy to be honest GENIUS 🤥🙄🤭
@@redcheeks12 Or, you could just buy a stove that is meant to be portable.
@@the_original_skytiger Stay blind to the possibilities. If you can load it into a vehicle, it is portable. anything you can do to facilitate that is a benefit....genius?
@@greggmouritzen7478 lol You can load a freaking ATM in your vehicle too. Does that make it portable, genius? lmao
Enjoyed watching and learning. I have some tanks in the yard. Maybe hubby can make 1 or 2for me and others for family.
Outstanding build. That would be perfect for my small hunting cabin. Thanks for the video.
Thanks for watching! Works nice for a small space just won’t burn through the entire night.
Rafael ……. Bravo!
An excellent DYI video!
Dam boi this is Awsome !! Looks so bad ass , I’m glad this popped up and I watched it
cr75future thanks for checking it out! Have some videos of other projects I’ve done check them out if you have time!
I enjoyed watching you create this wood stove. Fantastic.
Thank you!! Check out my other videos for more crafts if you liked this one!
I have much respect for fellow craftsmen and the art of a craftsmanship. I love seeing young men with a skill set that they work on perfecting. Let's face it, today's younger generations could use more mature and manly younger men.
Well damn! Nicely done! Under 20$.... impressive... nice design on the damper.. spring was a great idea
Thanks for watching! Always fun being able to make something useful for cheap!
Hey this guy is good that's a very smart idea good worker he gets a lot of credit just think he should go in to business I would buy one all this takes time and effort and hard work good job I don't know where he is but I would buy one from him bless his heart
Very Innovative and much appreciated you took the time to make this Video and for Speeding Up the Recording in those spots!! Thank You~
Thanks for watching
Awesome job I've been wanting to make one out of a 200# cylinder that I had given to me thanks for the idea💡
Very ingenious!!!! Good job. That is a really nice stove. Thanks for the video
Thanks for watching it’s a fun weekend project!
Great job! I watched the whole thing without skipping ahead! I like your design, but a little small. Ever think of using a well pressure tank instead of propane tank?
Funny you say that I just picked one up at the dumps yesterday! For a larger space I think it would work great.
Nice work! Thanks for sharing. You are a talented craftsman!
Thank you!
You might want to add a grate so the fire can breath around the fule, i think it also helps to stop the bottom of the stove burning out.
Good idea. Thanks for watching!
Some people think paint will stop the bottom burning out. 😨
Genius, innovation, and great presentation skills to boot. Outstanding and thanks!
Thanks for watching check out some of my other videos if you have time!
I've built many of these, just have a suggestion for you specially since you're using 6" pipe, weld a flame deflection plate inside to keep flames from going up the pipe this will also hold more heat in the stove.
Great idea I ended up having to add a damper
Great job great presentation all around a wonderful DIY project 🎉
Nice Build and a couple of suggestions. Before you cut out the front for glass....Consider cutting out a design with the torch. Ya Know like carve some trees, maybe a cowboy, some Indian Motif, a wolf or even some flames coming up from the bottom. Then lay the glass. Also ...... does the vent on the side make more smoke come out the Front.
That’s a cool idea for the glass! I don’t have a plasma cutter but I am thinking about investing in one and it would be great for making some nice designs. Haven’t had any issues with smoke coming out the front the chimney being so big provides a lot of draft that pulls all the smoke pretty well.
@@rafaelellis-rech6950 Nice idea! I'd add a shelf for cooking / warming also.
This is awesome, very nice job, I would love one of those! Would you add a small metal grate on the inside to help save the coals when emptying, and to get a little better efficient burn? Really good job here :)
Yes adding a grate would be a great idea haha! I would make the clean out different as the threads have gotten pretty sticky over heating and cooling cycles.
Great skills, Thanks
I would have liked to see it made laying side-ways with a 4 in. stack and a flat surface area on top for heating water and cooking
I may build another version for my camper! This one is used in my shop and not much cooking there otherwise the flat piece would be nice.
Some 1” Angle Iron welded into a rectangle on top,with 1/8” sheet on top of that would give a nice,strong,flat surface for warming up parts,cooking,heating Water…whatever 😎
That is so cool! I have a barn with a lean-to that that I use is a porch, was looking for an economical way to get some local heating.
One man's trash is another man's treasure!
Thanks for watching! Love making stuff out of things other people put in the trash!
I really like this. Love makin useful stuff outta scavenged or on-hand materials.
Keep rockin it, kid! d:^)
Thanks for watching!
As an Upcycle Seamstress. I Love this. I upcycle all sorts of things into others. So many pieces of 2nd hand fodder is great for Wonderful New life projects from clothing to pillows to handbags. So much can be recycled/Upcycled.
Deanna Stevens Very true we often seen things to landfills that can be given a second life with some creativity!
Very nice compact wood stove! May use the plan for a wood stove for my camper. Thank you!
Peace be with you!
Thanks for watching it would be great for a camper!
Perfect for an ice fish hut or a blind .. comfort
Yeah I think it would work great those types of situations! It’s very light so would be easy to transport!
Great Work, thank you for posting.....I really enjoyed watching
Thank you
Still waiting for that wood stove installation video. 😀
Oh man haha sorry been really busy with my house project but I’ll try and edit some of the footage soon! Thanks for watching!
Nice ! I like how you made it with stuff you had on hand. your style making the video is spot on. Good Job. Im going to watch some more of your vids. Keep them coming
Thanks it’s always a fun challenge to use what you have rather then just buying stuff new!
The only issue I see is that you cant unscrew your ash dump without tipping over your stove...
Remedy= taller legs:
All in all.
NICE JOB!
Thought wait last pic has legs ?But upon closer inspection still do not appear ling enough ? Is quite peculiar
You could easily unscrew the cap with a pipe wrench; slide a tray under the stove, wrench the cap off, brush ash out of stove, replace cap finger tight.
Could of have made a three leg tripod out of angle iron and then weld a pipe on each corner and just set the lil legs in the pipe
Great job, young man. Make sure you put a small grate in it to keep your firewood off the bottom, that will let the ash fall to the bottom and that will help it breathe
Very cool. 👍👍
Thanks for watching!
I like ur use of bedframes... I pick them up whenever i see them thrown out... good metal... and free
I agree they’re great sources of metal, you can get a lot of good stuff if you keep your eyes open. Check out some of my other videos if you liked this one. Thanks!
is the pipe not too big? something about how hot it gets and its diameter with the total volume affecting the draft
DangerDaveFreestyle I use a baffle to adjust the draft to a point where it works pretty well for me. The pipe is large but I wanted to use it to allow me to use all standard stove pipe parts. Thanks for watching!