I didn't believe it myself! I welded a barrel of pipes and it all worked!
ฝัง
- เผยแพร่เมื่อ 8 ต.ค. 2021
- To heat my workshop in winter, I made a wood-burning stove. It was burning for a long time, and even a day later there were still hot coals in it.
Thermal imager ali.pub/5aj1fe
Friends, my name is Renat! I am the author of the CraftMaster channel.
On this channel, I show everything that I did with my own hands.
Creative ideas, helpful tips and great homemade products!
We transform ordinary things into unique ones! Subscribe, it will be interesting! #diy #craftsmaster #homemade #craft #woodmaster #tools #ideas #creative #home-made #self-made #craftmaster #ofhomemanufacture #amazing #home-grown #handicraft #homediy #banausic #craftsman #workshop #jig #woodworkingprojects
Likecoin - криптовалюта за лайки: likecoin.pro/@sol/nga4/euk4
![แฟนแนวใด๋ - ยูริ โตเกียวมิวสิค [ SyncVersion ]](http://i.ytimg.com/vi/Fm8oDwos2uc/mqdefault.jpg)
Перолиз Я как-то проводил такой эксперимент правда сильно не заморачиваться .но делал из такой же бочки результат поразил всех .пол мешка дров не лудшего качества давали тепло почти судки .и моя модель была сделана что называется тяп ляп. Мастеру респект .а всем кто хочет поставить не пожелаете
Ха.. Р.. О.. Ш мастер золотая голова, и золотые руки приятно смотреть как работает дай бог здоровья тебе.
Мария он скопировал буржуйку 50летней давности, у моего деда стояла неметская печь впуска 1936 года оригинал, а этот кулибин похоже скопировал . Я с 1962 года .
Такие бы изделия да на поток. Браво мастеру.
Образцовое видео! Все четко, понятно, без лишней говорильни, прыжков и ужимок, без обязательных вымаливаний лайков и без почти обязательной в таких случаях максимально дурацкой музычки. Уважение, спасибо и удач!
Дождь
Молодец
@@kulandastambekova7406 Кто так обзывается, тот сам так называется) От таких и слышу)
Mi ricordi mio papà che se n'è andato via in cielo il 24.09.2021.
Lui era come te aveva un inventiva ed una manualità nel lavorare il ferro, unica. Davvero sei un'artista. Gran bel video e gran bel lavoro. Solo chi ha avuto accanto una persona così sa apprezzare il lungo e faticoso lavoro che hai creato.
Sei un Grande
💯❤🙏👍🏻💪🏻
Ты уверен что он в раю? ¿?
@@user-mp3nw5vn9l 👎
Класна ідея супер молодець трудяга.
🙌
Сколько же у нас умельцев!!! Всегда с удовольствием смотрю на таких людей и восхищаюсь их умением работать и их смекалки!👍👍👍
Благодарю! 🙌
Через три месяца, стенки бочки прогорят и будет «сито», также и на улице , когда сжигаешь ветки от яблонь и кустарников, бочки меняешь ооочень часто, прогорают ...
Тонкие стенки прогорят быстро, Бурельян надо копировать
Это сколько надо иметь инструментов, быть сварщиком,токарем , печником, чтобы всё было ок. А ещё, чтобы руки росли от куда надо. Это не сегодняшняя молодежь.
Колхозил-колхозил и толку? Синий цвет в тепловизоре говорит, нет орёт, о том что боковые трубы нах ваше не нужны. Тепло надо снимать с верхней крышки. Да и бочка тонкостенная, быстро прогорит и деформируется. Много шума из ничего.
А толку,что он показал главное размеры,а сделать то можно нечего сдожного
I paused this halfway through and took my plasma cutter out to dinner and made sure it knew how much I loved and appreciated it being in my life. I love you plasma cutter.
I'd love to be able to invest in a good one!
@@tclodfelter8789 mines just a cheap one respectively but it’s payed for itself in cutting wheels! Ha! I have the lotus. It’s been good so far.
@@vincentsumner5232 I guess after the plasma cutter...a welder ... and LEARN to weld!?? My welding looks like an epileptic with hiccups! LOL
I give mine a hug, every time I use her also…!!!
And a wire welder. He could of bought a plasma cutter for the cost of those cut off discs he used.
Единственный наверное ролик который мне понравился, хотя мне как женщине это не надо, просто интересно стало, что ж он такое придумал, что оно заработало ? И очень даже понравилось всё. Смонтирован ролик просто супер, не навязчиво, ни быстро, ни медленно, всё видно и понятно. Уважаю мужчин, которые чем то подобным заняты, творят свои идеи, и не скучают в этой жизни. Некоторые ролики сразу отключаю, когда начинают после обязательной вступительной рекламы своё приветствие, потом рассказ о том что он хочет показать, и сейчас вместе с вами будем делать это. Затем рассказ о том что для этого нам понадобится, и начинает перечислять показывая каждый инструмент или продукт, не забывая рассказать о его пользе. В этот момент я начинаю закипать, когда мне навязывают прописные истины, и подчеркивая тем самым какой автор умный, а зрителям его пояснения в диковинку. Максимум 5 минут могу выдержать такой нудняк. И ещё терпеть не могу, когда говорят: наша тарелочка, наша кастрюлька, наш супчик готов, мы будем сейчас с вами пробовать наш супчик и так далее... А ваш ролик начался конкретном того, о чем говорится в названии ролика, и без словесного поноса.... 5 звёзд за ролик, хотя он мне совсем не нужен.
Благодарю за высокую оценку! 🙌
Несомненно, автор молодец.
Поражает, что аудитория в основном англоязычная. Наших мало. Эффетивность этой печи в сравнении с буржуйкой в разы выше. Себестоимость по цене металлолома или того ниже, расходники по электродам, отрезным, зачистным дискам, электроэнергия...
Вопрос долговечности и простоты эксплуатации остаётся в зоне риска. Здесь каждый для себя решает сам.
Я пошёл своим путём более эффективным, но это уже из другой области физики. Однако конструкцией автора не пренебрёг, не смотря на то что газа, электроэнергии и других источников у нас хватает.
Как говорится на бога надейся, а сам не плошай.
Хх⁰0
Весь ролик просмотрела . Какой молодец. У меня Отец был таким же рукастым.Я всегда рядом с ним была, поэтому в жизни многое сама умею делать.
Хорошо,если и муж «рукастый»,а иначе придётся выполнять по жизни, две роли,-женскую и мужскую…А это несправедливо!
Un gran ejemplo de creatividad...es muy funcional y eficiente.. podría salvar vidas en climas extremos...Dios te ha favorecido con esas manos laboriosas...saludos desde Nicaragua...
Шаблоны из картона наше ВСЁ! Я строитель. Красавчик!
One of the best videos I've ever seen!!! I so so so love that there's no music and no talking and how the video just zips along!!! I was so excited to see the end work but because of how well you do your job I refused to fast forward! (that's a new one for me! Lol 😆) Thank you very much! 🥰💪😘 Looking forward to watching more projects! 🙋🏻♀️
Золотые руки, свежая голова, молодец, уважаю
I'm really impressed. This guy is tops. It's an amazing design and very creative. I highly recommend watching the entire video. Make sure you like and subscribe. This channel is a keeper. I'm.not sure why anyone would give thumbs down on this.
Incredible when you think of what this man could make with a plasma cutter and a MIG setup!
Props to you - nice job!
Ein Meister der Thermodynamik und der Konstruktionsmechanik !
Er sollte sich mit LIN GUOER jeden Morgen ein Frühstück zusammenschweißen.
Профессию не пропьешь, просто супер!!!
Мне все понравилось-и конструкция, и сам видеородик! Смотрел с большим удовольствием, съемка просто шикарна, по-видимому было все продумано, а потому не утомляет. Есть выражение-что ни конструктор, то новый редуктор, а по сему не стоит делать замечания. Трудоемкость конечно большая, но цель этого стоит. А главное в том, что это творческая работа. Можно было бы показать скребок для удаления пепла (это, конечно, шутка). Этот ролик меня вдохновил на свои идеи, и это здорово. Желаю автору дальнейших творческих успехов и крепкого здоровья. Удачи Вам! И большое спасибо за видео.
Благодарю!
Подзольникбудеттруднооткручивать
I laughed out loud when i saw your scrap pile...
My dad was a phenomenal pipe fitter...he never REALLY retired. You Tube was an up n commin concept...one he might have enjoyed If he had taken time to sit... He would have enjoyed watching this one for sure. He was like you; He "saw things" and made them. Lots of them. LOL we grew more pipe in our back yard than grass. As th lawn was one'a my chores, flying snakes and pipe was a saturday thing.
😅❤good job. Thanks for th memory😉👍
Мой отец, инженер, в 1956 году на целине обогрел такой бочкой ремонтный цех МТС площадью 400 кв. метров. Только у его "бочки" вентилятор прогонял воздух через трубы. В морозы цех прогревался за полчаса . . .
Ыы\ццц\²
Вот бы схему вашей бочки и системы отопления, у вас не сохранилась?
Enlightening, not only into metal design and work but most of all, exemplifing the function of the male brain. I could marry this man.
Increíble amigo.....lo que somos capaces de hacer ....por lo mismo cada ser humano debe respetar el trabajo de otra persona.....de esa forma se transmite el conocimiento y vamos adquiriendo sabiduría humana.... " felicitaciones " de mi país chile... gracias
Brave technician.
The heat will last dramaticaly longer when you place inside and around from bottom till up a layer of heavy bricks for fireplaces. This mass captures the heat and delays the cooling.
Best wishes!
from greece.
I am not a welder or metal worker, but your video heading caught my attention and peaked my curiosity as I watched you skillfully create this stove. At first I was baffled by your initial creation wondering what it was you were really making.. however, I stuck with you all the way through and was greatly impressed by the level of your hard work, ingenuity and professionalism. What an amazing skill and achievement sir. Also, now I understand what you have finally constructed, I'm inclined to agree with some of the other commenters suggestions, especially about lining the drum with fire bricks and adding a radiator or two filled with water, leading off left and right of your stove.
Nevertheless it's a great project and every bit worthy of the challenge. Thank you for demonstrating your skill and mastery of your craft. I loved every minute.
🙂🙌
Yeah, water filled radiators what I was thinking
Amazing video, I read below and agree that the photography is as good as the actual build itself. What an incredible use of recycled materials and turning scrap into something that will provide comfort to a workshop. It never stops amazing me how much we take for granted and the genius that is in us all. This is not only an enjoyable video to watch, but it teaches us many lessons. Don't complain about something...do something about it, and if you put your mind to it, you can accomplish anything! Really enjoyed watching this one...great job!
You are right! His use of simple techniques that save many errors was a real eye opener for me.
Хохол
Отлично сделано. Вот что значить обладать терпением, желанием, материалами и самое главное трудолюбием.
Классное видео. Без лишней болтовни . Всё ясно и понятно. Я для себя много чего взял на вооружение. Зачётный ролик!
It's amazing what some people can do without having to have access to thousands of $$$$ of equipment to work with. Great job, I was a welder fabricator for almost 50 years, "CraftMaster" did a real good job of building that heater.
M.
right he was outstanding with the wheels, measure, and had a sweet stock of steel there too lol. I had scrap yard for 30 years that allowed myself a insane amount of stock material[s] & unique shit to create from !!! /;^)
Always Forward ~ Godspeed
I think that one of the thing's that got me the most about your video was the simplicity in the complexity and the 'few' tools you used. Loved the video!!!
Актуально для всей Европы.... Молодец!
Зверь мужик! Я пока смотрел думал в конце появится ракета прогресс!😉👍
Задумка отличная, работа усердная. Но это всё не надолго. Бочка чрезвычайно крайне быстро прогарит. Нужно было сразу трубу использовать, вот тогда бы вообще огнище было👍
We have one like this and it's good since 10 years.
У него ушм аккумуляторная, 3мм пилить долго не говоря о трубе размером с эту бочку.
в этой печи не будет высокой температуры прогорать будет очень и очень долго. У меня из такой же мангал уже 7 лет не прогорел а там температура высокая
@@user-zx8zl5gk6o А мангал частный или в кафе? Он тоже сутками напролёт работает?
@@user-zx8zl5gk6o даже если долго "ТЛЕЕТ", один хрен прогорит!!! Не говорите глупостей. Что у меня бочек не было и нет на участке? Мангалов тонких, подобных бочке не было? Не надо смешить "Пи" она и так смешная... Если так заморачиваться, то делать надо сразу из трубы! И, как модно нынче, и принято говорить.... ИМХО! 😁 Через чур замороченная идея и работа, чтоб делать это из фольги.
Muy buena idea , gracias por compartir sus conocimientos...
As a fabricator with a decently equipped shop, I love the ingenuity and creativity! Getting things built with what you have is a truly awesome skill.
З
Que es eso ?
Que uso le das ?
@@herrbryjaz6680 es para calentar el aire de la casa
Having a plasma cutter would save a Fortune in production time
@@Butchsiek he he, yup I said it like 5x watching, ya must have heard me !!!
THaT SaID.........pro-LeVeL skills cutting, me impressed !!!
The one thing that warmed my heart was seeing him using the stick welder, I built everything I needed with the little old Lincoln WeLDeR aka → BuZZ BoX
Mesmerizing watching you work and that is one really hurky built stove! Enjoyed your build very much.
Хорошая конструкция, но думаю, если бы боковые стенки сразу были из труб, то эффект был бы на порядок выше, а если при этом низ труб объединить в общий короб и добавить вентилятор, то эффект был бы мгновенный
Охлаждение камеры сгорания приведет к неполному сгоранию топлива, не будут сгорать дымовые газы, это наоборот - топливо в трубу
@@user-tl4zj8ss7y если на колосниковой решётке есть жар, то никакое охлаждение стенок камеры сгорания уже роли не играет
Made a similar unit for my garage back in the 80's. I was loosing far too much heat out the stack, so I added a second barrel on top. It had baffles inside it to keep the exhaust heat from moving thru it too fast. It made an incredible difference, I would guess at over 45% increase in efficiency . It allowed for a serious savings of fuel.
Yep, a "smoke shelf" plate in top of burn chamber, retains heat for full combustion. Learnt that when I made a slow combustion stove from an old hot water system tank.
Excelente invento magnífico felicidades
Отдельное спасибо за картинку с тепловизора. Очень поучительно и понятно. Удачи Вам.
По картинке с тепловизором стало понятно, что трубы зря приварил. Если бы трубы согнуть буквой Г и верхнюю перекладину положить на печь сверху, то был бы
эффект Да и что мудрить с трубами? Уже есть печи булерьян, там все грамотно сделано.
@@user-jf8pw1ik6t боковых труб много, соответственно большой и быстрый съем тепла
I built a very controllable heater from 3/16 plate, 4 in exhaust, screw adjustable intake. Very good at long slow burns. Only real issue is the flue runs cool and creosote builds up in the pipe. I just happened to have a 4 in flue brush so I can go up about twice each season and brush out the buildup. I was thinking about a bread baking oven using a similar pipe design to yours where the pipes would be inside the drum running from the lower fire box up to a smoke chamber and out the flue. The pipes would carry the exhaust through the baking chamber to heat the oven from almost 360 degrees around to eliminate hot spots. Like your innovative designs.
Grandma used to save potato peels and dry them and once a week throw a handful into the stove and never had any creosote build up just a film of powdery dust in the spring.
An empty aluminum can once in a while does the same as those expensive creosote sticks they sell. Put one in the fire and you'll soon hear the creosote harden like glass and pop off the inside of the pipe like someone is dumping sand in there.
Up it to at least a 6 in flue and choke it slightly with a damper this will burn cleaner, your fuel/air mix is producing to much carbon, more air is needed
@@lightpropulsionguy the idea is to slow down combustion, not increase it. One of the reasons I built this stove was to control combustion. It probably not making any more combustion byproduct, it’s just cooling down and precipitating out of the smoke stream. Hotter flue gas carries the byproduct away to the atmosphere.
My friend had an oven like you describe in an ice shack for fishing in Maine. He built a tin box around the flue pipe, with a little door, and some adjustable vents, and an oven thermometer...you could cook a whole frozen pizza 🍕 in it.
This isn't just a how-to video on fabricating a super-efficient shop heater from scratch. It's a lesson in photography and editing. This fabricator is as good with his editing as he is with a welder. Attention to detail. Patient. A proud craftsman. He considers story-telling with a camera to be a part of his identity. No short-cuts. Every shot is like a sentence - camera positioned to explain the action with minimal movement and time. Steady shots, good exposure, focus, and short cuts with clean audio. Always interesting.
Reality is like an old cow. No one wants to watch it. He turns that ugly boring cow into delicious cuts of steak. Well done!
Reality is like a old cow. I had to write it down.
And to you, well said! I agree 100% with your comment!
You said everything I wanted to say!!! A Very articulate account thank you!
He killed it
Мы на своем жзаводе по частным заказам и не такое делали , для дачи незаменима , быстро прогревает помещение , комфортно выглядит. А в данном случае молодец мужик умелец, сам варит , отрезает ,конструирует -- руки и голова на месте
Z
Muy buen trabajo amigo. Te felicito.👍
Классная печь получилась👍
I must admit that I didn't understand what you are building until three quarters of the way through the video. You have the love of the profession in your blood, that is obvious. Congratulations !
excelente trabajo profesor... saludos Rafael, Cusco, Perú...
You will drastically improve the heater’s performance if you run a pipe from the outside to the air intake. Right now, cold air is being pulled inside your building to make up for the combustion air and whatever air is going up the chimney. Pull the combustion air into the heater from outside so the cold air doesn’t mix with the air in the room.
Exactly.
while this is good, it is also nice to draw some fresh air into a building (regardless of outside temp)... so a balance of drawing outside air directly into the stove, and drawing a draft under your door (for instance) is actually better for air quality.
Agree. That's Ben Franklin's idea from year 1742.
pulling outside air through the room into the oven prevent monoxide build up, aside that, an workshop should be ventilated...
The hot exhaust is positive pressure so can escape into the room when nearly closed. Better is to put the restriction on the intake side and keep the whole stove negative pressure.
Awesome skills. Learned a few more tricks too. I wish I had half of your talent.
С чувством, с толком, с расстановкой, а главное с душой👍
Me gustan mucho ver estos videos, que talento de este hombre
What I especially like is no stupid music, redundant parts were sped up, and you emphasised pertinent details... Bravo... Excellent video and editing for us guys with short attention s[pan... Thanks
Лдвлчдввджвдвлв
Члвддвждвдвдвыддыыддыдыдыдыдыддызыддыжыдыыджыжыдыыджыдыдыжыдыддыдыдыдыддыдыыддыдыдвдвдыдыжыыдыдыжыжыды
People always chastised me for keeping odd bits of pipe and scrap metals around . I always laughed as I made a lot of needed tools and things useful for me and others. Now I’m an old guy and still keep my shop and do a lot of things when I’m able. This was a great video.
1
My next door neighbour just returned from an estate sale with a truck load of old steal pipe, angel iron, elbows, rod, and flat sections. One man's trash is another's treasure... For sure... It was beautiful...
Throwing away material is like throwing away the extra Legos pieces that come with a set. It costs nothing to store them if you're already maintaining shop space. Only people that don't build things would be so stupid as to criticize anyone for saving pipe, rod, plate, fasteners, etc. Part of inspiration comes from seeing the material you have available, and when you need something, you never know how long it will take and how much it will cost.
Yes same here :) but the cost of scrap metal was so low was not worth the cost to even haul it off was a big help!
Was raised around towns with refinerys so have seen all manner of ways to re-use that material my Great grandma's and grandma's shot gun houses were on foundations made of 3 in pipe and concrete;) and gma's garage was framed in 3 in pipe:) doesn't rattle when the wind blows:)
I spent over a yr.making rail road scrap angle iron into brackets to use in framing! built several out buildings a greenhouse and a full deck using fence posts and those heavy brackets and lag bolts! people who lol before,couldn't believe how fast and sturdy that stuff was(is) I still show people how to re frame fences using angle iron and deck screws is cheap,easy and never breaks:)Peace Rick
I laughed out loud when I saw the rusty old barrel. Around here Once used clean barrels, with paint still on them are $5 US each.....
Absolutely beautiful. Great video thankyou for the upload!!!!!
I respect your patients and knowledge of the craft. Awesome video dude.
And his patients have a lot of patience with him. 😊
Thank you sir for no annoying music and actual sound! Great build, I'm sure you'll get years out that stove!
Над8;
Он думает сделал откритие,глубоко ошибается.
At first, i imagine a strange musical instrument, but....simply a great and cool idea. God bless your hands, and thanks for this amazing vídeo.
You’re an extremely skilled craftsman.
So enjoyable to watch. Those drums don't last long term but you should get a couple of winters out of it. Definitely worth a couple of days work fabricating! Well done.
Just the fab' work alone is great, but the design AND filming/editing it all - BRILLIANT!
THIS kind of stuff is what TH-cam is all about.
nice workmanship. and love how you didnt bore me with details. you just did the work. thanks
And don't forget, he didn't put in any of that God awful music!
Мастер золотые руки! 🙏 🔥 🔥🔥👍😁👌
Love it! Thank you for the video.
Gives me some ideas!
Parabéns, ficou muito bom
È molto ingegnosa
Great skills and creativity. A respirator mask would help to protect your young lungs from grinding wheel dust and silicosis. Just some love from a retired welder's wife.💖
Good point
My husband has lung issues now. Mainly from grinding wheel dust. Please protect your lungs. You need them to breathe.😉😎🤗
Mommin it up in here! Gotta love it
There’s the goofy ass safety man.
9
Loved how you made your heater! God bless you brother..
I really enjoyed this video. Editing was perfect. Engineering was equally impressive. Well done.
My experience with drums of that type is that they don't handle fire and heat that well and therefore don't last. However with the bracing of the pipes outside it should last a little longer but the fire and chemical reactions due to burning cause the metal to rust and decay quickly.
Also commentary is needed for someone as inexperienced as myself to fully appreciate and enjoy. However it was still very interesting.
Yeah normally if you want them to last you have to coat them in refractory cement so they don't rust away. That thin steel just is not intended to take being used as a fire box.
З
@@Automedon2 Your standard burn barrel has no lid, and the lid is the part getting the most heat.
Other factors come into play as well with how long it takes them to oxidize through.
@@Automedon2 we are more clever , and we keep our guns and money , screw the UK.
Muy bueno,gran trabajo,,y buen manejo de las medidas,exelente,,.
Un surdoué ce Monsieur, bravo 👍👍👍
Excellent fabrication. Creativity at its best.
This takes special skills . Well done my man. I enjoyed watching this
Да , автору идеи большой респект! Не каждый так сможет заморочится!
Какое там не каждый ...никто это не повторит ...
@@alexburygin8560 зачем повторять? от труб почти толку нет: по тепловизионной съемке видно, что они намного холоднее самой бочки, следовательно дают не более 10-20% теплоотдачи. Сделать печку из бочки без труб по периметру в разы проще, причем даже сварку можно не использовать
Ну да, такие печьки пригодны только где температура воздуха до-5градусов. Если у нас в
сибири ,где минус 40 эта печь не пойдет
@@pavel6648 Да, от простой буржуйки уже в помещении была бы баня. Но отрицательный результат позволяет сделать правильный вывод. Спасибо автору за труд. Теперь знаем, что так делать не стоит.
Абсолютно верно потом ещё заморачиватся золу выгружать и как дрова подкидывать
Это какая то турбо Печь😃 столько труда вложено, здорово!
Nice build, i wish i had a workshop myself. And a scrapyard.
Просто молодец умничка,без лишних слов
I love working with metal. That is an excellent job on the build 👍
Хорошая работа! 👍
Menschen mit dieser Gabe nennt man im allgemeinen "Künstler". Ich bin fasziniert von der Fähigkeiten von Renat! Ein unbedingtes Muss zum Abo!👋
🙂🙌
Me encanta como usa las herramientas ,la precisión co q trabaja ,la seguridad eso sólo lo da la experiencia y el conocimiento felicitaciones
What a great job, not everyone does something like that
I'm so envious of welders so many feats of transportation and sculpture are within their reach
Please i don't want be mean
But this guy is not a welder it's a bricolage 🛠 man.
Those welding are not professionnel and to be true it's dangerous to make some welding amateur like this on a stove cause the carbone monoxyde can go out on this welding, you can died.
This guy is not bad but he need to learn how to make safe stick welding, there is a lot of vidéo on youtube to do that.
But iam agree with you welding its fantastique to create thing 👍
@@Quiwi707 huh okay
DUDE...THANK YOU SO MUCH for the wee bit of extra effort to show the number displayed on the angle finder. 99% of diy content neglects details like that and those can be the difference between a fun project or a frustrating marathon of trial and error, wasted material and time.
безусловно мастер!!! из чермета аккуратно и с толком сделал хорошую вещь!!!Единственно чего никогда не понимал это покупку и использование аккум инструмента(за исключением шуруповерта)-деньги на ветер!))
Хорошая работа! Спасибо! Из металлолома рабочая вещь! Когда руки из правильного места растут!👍💪
Это когда металлолом есть.
А если ..........?
.... металлолом всегда есть
@@ya-Master если бы, да да кабы…)
It’s great seeing people actually making useful items from metal that often went to the scrap yard. I come from a family of certified welders, structural welding test isn’t a easy test. All 3 positions are tested, flat, vertical and overhead. Then a strip or coupon is cut out and the weld is Xrayed for air holes and then put into a bender to test Tensile Strength.
Being a plumber for years I tried stick welding but never got certified. Silver solder was tricky back then, getting the copper cherry red and trying to get a smooth clean solder. With all the new highly engineered welding equipment being either spool feed or using a stick, temperature is critical and these new machines are programmed to keep it correct.
I have always gauged a mechanic by their tools, for years it was thought to be a male dominated trade, but during WW2, women did most of the welding and riveting, aka ROSIE THE RIVETER.
I have amazing Trades people, many women who are great mechanics and Trades Persons.
I need to see who makes AEG tools ?
All the great trades people are using this brand.
Thanks for showing how scrap is one person’s gold.
I have repaired radiators made from black steel pipes which lasted for years on Steam boilers. Steam is easily understood when you know the basics, it rises and expands at 1700 % as it converts from water to steam, I always used Black steel pipes and black cast fitting, they are designed to split for replacement. On gas piping Black Malabar fittings have not casting holes.
All trades have their own tricks, which often takes years to learn, usually from an elder Trades person.
Few if anyone knows it all and TH-cam is a great resource to start learning ⭐️⭐️⭐️⭐️⭐️
Along with every Trade come the jokes associated to them, being a plumber for years I liked them all, there is brand of Suspenders that are colorful and are made with embroidered images of each Trades person, of course the plumbers suspenders were out of stock. With all the bending and movements through tiny places, dragging along a small MC Acetylene tank which’s flexible hose and turbo torch is attached keeps you alert to say the least … lol, it’s great exercise, mostly you need to know how to lift correctly with your knees and back straight, most of the muscles need upper body strength for turning wrenches Or threading pipe with a ratchet dye head , sorry kid the Rigid 300 is in the shop and this job is behind, so get moving. Oh the fun of being an apprentice under a Master Plumber, fetching coffee for that fat bastard in my case who sat in a chair with a school poker stick, like he was a Maestro leading his own quartets …lol
Humor is what keeps us all together, job pranks are seen as fun , such as disconnecting the Lead extension cord of the person drilling away 2 stories above you, and pretending to not be aware of how it happened, hey there’s a dozen people working on this floor, perhaps it got caught by someone walking around and tripped …
I f you do not have have the ability to learn and laugh at the same time, find a desk job somewhere. The trades are not for the weak hearted folks, we work hard and play hard, but without malice, again find another line of work … lol
I truly enjoy trades people, see when you enjoy whatever you’re doing, you’ll never work a day at all, meaning it’s fun.
Nicely done. Thank you for sharing. Have a blessed day.
Yeah that’s an awesome stove
Great build man!
This video is so underrated. There’s so many helpful time saving tricks of the trade here for sure. Thanks for the insight to your craft!
Absolutely awesome!
Holy hell. That's a lot of work and a 24+ minute video that feels like I've been watching it for hours. I would've just went on Craigslist and found a wood stove that someone was giving away for free.
Es un trabajo y un diseño excelente para calefaccionar un taller o una escuela. Felicitaciones. Te envío un cordial saludo desde la Ciudad Autónoma de Buenos Aires Argentina.
Olá amigos 👦👦👦. Ótimo trabalho. Nada é difícil e sim tudo é trabalhoso. Parabéns. SHOW Ok 👍
Очень полезная рациональная печь
One of the most awesome how to videos on TH-cam!
Homemade shop stove, good job.
Молодец, руки золотые и голова светлая.
Love it I clicked to get ideas for mine that I'm headed to fab up now . And as someone who uses a welder to pay the bills I gotta say good welds for a small stick such as that and slow your travel speed down just a hair and your Gravy my man . God bless ya my good sir
Вот это творчествО, все как часики тип топ и вуаля! Ни работает а чудеса творит .. Дело мастера боится, ведь ни даром говорится. Молодчинка.
I like your scrap yard. No such thing as useless junk. Nice work!
Unfortunately I agree, and my 'junk' collection confirms it.