DIY Wood Stove made from Car Rims
ฝัง
- เผยแพร่เมื่อ 18 มี.ค. 2020
- How to make a Wood Stove from Car Rims & Cast Iron Manhole Covers & Frames.
This stove is made from old 16" Car Rims and Upcycled Cast Iron Manhole Covers & Frames.
Hope you enjoy the video and always remember....Rust is Gold!
@RustisGold
Channel: / @rustisgold
Facebook Page: / rust.is.gold
Instagram : rust_is_gold - แนวปฏิบัติและการใช้ชีวิต
Hats off to all men’s with sheds and garages equipped with different types of tools.
😄😄🎩🎩🎩!! Are you one of us?? 😊👍👍
@@RustisGold pp
Quite wonderful ! No exotic tools - no exotic parts - no exotic shop - just raw skill, ingenuity, and no shortcuts. Great vid editing too! Wish I could give more than one like. A pleasure to watch.
Thank you very much for your comments! I am glad you liked it! 👍
Over my first cup of coffee, I enjoyed every minute of your video. Thank you for sharing. I've been making rolling garage stools out of old steel car rims, but thanks to your video, I have a new challenge.
Thank you very much for your comments! I am really glad you liked it! Also I am really glad it inspired you to try something new! 😊😊👍👍
That was the coolest set of hinges I ever seen anyone build I’m 49 years old good job. An ive seen a lot of welders make stuff I was a mechanic on strip job
Thank you very much for your comments! I am glad you liked it! 😊👍👍
This is not an instructional video.
This is art.
Thank you very much! I really appreciate it...
@@RustisGold It is an amazing video. I am never going to make this stove but I couldn't take my eyes off the film for a moment.
You are gifted, thanks.
That was one hell’uv a satisfying video! Thanks for making and posting it.
Thank you very much for your comments! I am glad you liked it! 😊👍
I think it’s great that folks like you have the imagination and artistic vision to make something like this. Not to mention the ability to fabricate it as well. Well done my friend this is outstanding!
Thank you very much for such positive comments!!! 😊👍👍
Master Craftsman thank you.... Great for a steam bath ..............my grandmother country home in Syria had a steam bath with a barrel shaped like the Jamaican drum ...with a faucet on top filling up with spring water.....on the bottom you feed the firewood ......and a spout coming out from the mid section of the barrel delivers the hot waters into a 25 galleons carved grant tub with a cold spring water faucet to adjust the temperature of the water ...........my favorite bath time .....I believe it's from the Ottoman empire time .
thank you.
Thank you very much for your comments! I am glad you liked it!😊👍
You are a genius the most beautiful creation I have seen in years. I was afraid to blink for fear of missing anything.a bonus was you didn't have the need to put you face on the screen no need to speak and you love dogs. The best te I spent on my phone for ages. You are amazing.
Wow!!! The best comments I have ever received!!! ❤️😊 Thank you so much! I am really glad you like my creations!! I appreciate! 😊👍👍
way-da-maka a video... no babble, no milkin', no BS... Thank you.
Thank you very much for your comments!!!!
add refractive bricks layer at the top and your heat will be 30% better...
also clean the soldering is a great possible esthetical aspect too. anyhow it's a great job you did guy!
I'm going to make one with tractor rims :D
Thank you very much for your comments! I know it would be much better if I had added the bricks.... I'll have it in mind for future projects!
Tractor rims are huge!!!
Why don't you use truck rims??
@@RustisGold I'm joking for the tractor rims, but can be interesting for a big restaurant pulled pork stove :D
I just watched a video from a couple weeks back, of some folks in one of the Baltic countries (Estonia, Latvia, Lithuania, one of them cannot remember) stockpiling scrap car wheels like these to turn into wood stoves for Ukraine. With so much of their infrastructure being targeted, the stoves provide comfort and warmth to civilians when needed. They were also filling them with humanitarian aid before shipping across their borders. All voluntary! The only difference I noted was they used smaller wheels as they stacked them, resulting in a narrower top. Such an intuitive design and easily replicated, I enjoyed watching this video as it was far more in depth on the manufacturing aspect than the one I watched previously.
Thank you very much for your comments. Glad you liked it! 😊👍
Later that day the neighbor across the street comes over wondering why his car is sitting on blocks.
Hahaha!!! And there are no manhole covers left in his house!! 😂😂😂👍👍👍❤️
That was great! I was so impressed with the man's work - I missed the grin factor. Thanks!
Very funny
That's funny, great
These are manhole covers for private use. You can buy them brand new for around 20€ each, (price depends from the size) at any local plumbing store. I bought my rusty old manholes from a scrap yard for a ridiculous amount of money.
I love the ingenuity of materials and the honesty of the build. Don't take any notice of anyone trying to rubbish the welds or criticise how it should be constructed. You don't see them taking the time and effort to post their efforts on here. I think you did a brilliant job 👍🏻
Thank you very much!!! I really appreciate your comments!! I am glad you liked it!! 👍👍👍 Unfortunately people act as this is a TV show competition where we have to select a winner... I don't mind about positive criticism that helps you get better. But some comments are really bad...
If welds are rubbished just a little more air flow for slightly hotter burn when shut down. 😆
😄😄😊👍👍
Dude you didn’t have to say a word . And better than not speaking was the fact you Didn’t play music like some do . Love this video and a great job you did on the wood stove and creating this for us . Wish I new how to weld like you do great job .
Thank you very much for your comments! In the beginning I used to add music on my videos... I realized that it was impossible to find music that everybody likes... Since May 2019 I stopped adding music. Just the original sound of tools banging!! 😊👍👍
Regarding the quality of my weldings a lot of people criticise me that they are not good. I know it's not the best welding but I am not a professional welder and this is not a welding competition. Plus I use the grinding wheel and they look just fine. I am not trying to sell the objects I create. Just trying to show to other people how they can transform pieces of garbage into nice looking and functional objects... Take care! 👍👍
When you can create something useful from scrap that serves your needs that's a good thing .Those who said it was not a good project, must remember, he built that stove for him not you . Good job.
Thank you very much!! I appreciate your comments! 😊👍
A lot of people criticized the quality of my weldings... I know it's not the best welding but I am not a professional welder and this is not a welding competition. Plus I used the grinding wheel and they look just fine. I am not trying to sell the objects I create. Just trying to show to other people how they can transform pieces of garbage into nice looking and functional objects... Take care! Greetings from Greece!! 😊🇬🇷👍
91 a job at least a little too bad
A
9
81
Wow!!!!! I'm simply and thoroughly in awe! Well done. I figured at the onset you would have used a plasma cutter for all the wheel cutting, but you did it old school, showing us that you don't need a huge shop full of expensive tools to do stuff.👍👍👍
Thank you very much for your comments! I am very glad you liked my video! I don't have a plasma cutter or a Mig. It takes a little longer however the job is done! 👍👍
Loved this... A grinder and paint makes the welder you aint!!.." 😄😄😊👍👍
😄😄👍👍
I'm always amazed how they cut a small circle on a non flat metal using a grinder with a 5" blade! Great job!
Thank you very much!
The difficult part is to create the first full circle. Once you do it it's very easy. It just needs patience and to go around over and over again by slightly pressing the cutting disc.
This reminds me of the stove my grandfather made that we called the Martian, it was mad out of old bus rims and some plate steel, heated the house for 40years before they got a commercial stove. The thing looks like a vertical flying saucer and heats like it was some alien tech, love it! Thanks mate for showing the ingenuity of the human race to stay toasty!!!
Also Jesus arc welding, man I didn’t know anyone still does it, so many booger welds but man they hold hard
Thank you very much for your comments! Glad you liked it! People write to me many negative comments about the welding, I know it was not the best welding but I am not a professional welder and this is not a welding competition. Plus I used the grinding wheel and they look just fine. I am not trying to sell the objects I create. Just trying to show to other people how you can transform pieces of garbage into nice looking and functional objects... Take care! 😊👍👍
That can be used in so many different ways I mean you get like a hundred thumbs up for me that's like a cooker oven Dutch oven smoker heater cook on the top of it and it got that beautiful colonial style look that is one gorgeous piece of work and just imagine it's made out of car rims congratulations you got a God's gift a challenge talent
Thank you very much for your comments! Glad you liked it!! Actually my son liked it so much that he took it to his apartment as a decorative item! 😊👍
thank you not backing up the video with mind numbing annoying crap-ass "music" like 99% of TH-cam posters tend to do. Built my first wood stove out of an old water heater tank core back in '75. Was very rewarding first time I built a fire in it to take away the chill.
Thank you very much for your comments!! I am glad you liked it. I used to put music in my videos but I decided to stop it.
There's nothing more fulfilling when you build something than the moment you first put it in use!
Thanks again! 👍👍
As the comments about the weld, agree, I used to do lots of welding, was the first thing I noticed, but the final product after paint? What the heck!! Looks beautiful.
Thank you very much for your comments! I know my weldings were not professional but after taking care of them with my grinding wheel they look pretty good now. And 100% sealed, no holes, not even a tiny one!
Rust, you do great work! Your work inspired me to learn how to weld. I am retired and thought the wood stove you made was awesome! You made it look easy, finding the material is the hard part for me, high temp glass and the 6 inch steel pipe for the portal. I am in the process of making one like yours now. Do not be discourage by some of these jerk's remarks. Keep on posting your project please!!!! Oh yeah, next time I go to Greece I want to see that stove! THX again
Thank you so much for such positive comments!!! You are very welcomed when you visit Greece to come and see the wood stove while drinking ouzo and eat seafood meze!! Take care my friend!!
Jason if you need metal parts visit your local scrap yard. They will have everything, from car parts, to old boilers and stuff like that. The rest, such as that glass can be bought online. :)
Anybody ever says anything about your welding again. You tell ‘em… “A grinder and paint, makes me the welder I ain’t”
😅👍
😄😄👍👍
Hahaha! This is so true! 😄👍
I call mine gorilla welding, it does the job
@@Shakingstevesallotment yes it does!!! 😊😊👍👍
I use to make rim stoves back in the 80's, there great! Made a version with a water jacket just above the door, made hot water fast!
Nice!! Very good idea!!! 👍👍👍
One of the best DIY car rim stoves I've ever seen on TH-cam .. big thumbs up for this comprehensive tutorial !! 👍👍✌
Thank you very much for your comments! I am glad you liked it!! 😊👍👍
Yes! I seing bunch, none compares to this! Neat, well detailed, no annoying back round music, just the beautiful sound of the grinder, love it! Q: How many hours and welder rods took to complete it? Also could this be done using a Mig welder, like a Lincoln 140?
Thank you very much for your comments! I am really honoured! It took me a month to build it but net time I would say it was 2 weeks 6-7 hours per day. Total cost 120€. If I had a Mig I believe the wood stove would look even better! I need to buy one... 😊👍
@@RustisGold I'm not a welder per se, need to starting practice. Reason I ask is not bashing the welder that you use, but because the only one I have is a Lincoln 140, and was wondering if the rims was too heavy for it. I think I can go up to 1/4" thick plate, probably need to do few passes. Appreciated!
WOW!!! Highly functional, beautiful, AND made from reclaimed materials!!? RIGHT ON!!! Thank you for being in this world, and sharing your gifts with us all!
Thank you very much! Glad you liked it!! 😊👍👍
That was amazing. THAT is MORE true ART than I have seen in forever.
I bet he has never had to pay any repair bills, ever.
Thank you very much for your comments! I am glad you liked it!! It's true, I rarely (almost never) pay for a repair man to come and fix something in my house! 😊👍
That was one of the best videos I’ve seen on TH-cam. I hit the like AND subscribe buttons. Also, thank you for not putting any distracting music to it. The video spoke for itself. 👍🏻👍🏻👍🏻 Great work!!!
Thank you VERY MUCH for your comments!! I am glad you liked it. I used to put music in my videos but I decided to stop it.
Thanks again! 👍👍
Fascinating...so creative. Enjoyed every minute without music or verbage.
Thank you very much for your comments!! 😊👍
I think this is the prettiest homemade stove I've ever seen.
Thank you very much for your comments!!! Glad you liked it!! 😊👍👍
Watched your video over a cup of coffee this morning. This is very impressive. You show great skills in time, patience, creativity/art, the ability to think outside the box and use what is around you.
One of these days I have to get off my butt and get a welder instead of going down to my buddies shop all the time.
Thanks for sharing your ideas, it plants a seed in others and they grow into new ones!
Thank you very much for your positive comments!!! I am really glad you liked it!! I just love creating things out of the garbage!! I am not a great welder but what the heck!! It's all about having fun!!! Greetings from Greece my friend!! 😊🇬🇷👍
Came here because I have 6 old Mobile Home rims and have been wanting a wood stove for my shop. I like how yours takes up as little of the shop floor as ppossible. And the Mobile home rims have no center, so my build will be a lot easier.
Nice! Good luck with your project! 😊👍
Wow .... great job . Wouldn't mind something like that in my hunting cabin on my property
Thank you very much for your comments! Glad you liked it! 😊👍
اd
... молодец парень!-, отличная получилась печь -камин, ещё бы можно было сделать с верху комфорту, для приготовления пищи,дай бог тебе здоровья и благополучия, новых творческих успехов и хорошего настроения 👍👍👍🤓🛠️⚙️🔩🔗🦾👌🆗🇷🇺👈!!!
Большое спасибо за ваши добрые комментарии!!! Я рад, что вам понравилось! Привет из Греции!! 🇬🇷😊👍
This is a very handsome piece. Well done.
Thank you very much for your comments! I am glad you liked it! 😊👍
Awesome Art Bro. Thanks for sharing this video.....
Thank you very much for your comments!
You may not be a professional welder, but your creative skills are awesome.
Thank you very much for your comments!! You're right, I am not a professional welder...
This Guy's ! A WELDING !! FREAK !!!
Дорогой брат, создание данной печи фактически из, металлома подобно высокому искуству!!! Каждый шаг неповторим, а результат качество не хуже того что применяют на лучших заводах!!!! Живое горение огня завораживает!!! Многому научился у тебя, только немного практики и пойдёт!!! Как всегда большой лайк и море уважения!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
😊❤️👍👍
Beautiful, a masterpiece if you ask me! That kind of creativity can only come from heaven! Be proud of your self. Anyone who hates on this has got to be an envious narcissist .
Thank you very much for such a positive comment!!! 😊👍👍👍
I’m blown away at how good you’ve done this. Truly top class work. Well done
Thank you very much for your comments! I am glad you liked it 😊👍👍👍
Very interesting! I built a barrel stove for the shop using a length of thirty inch diameter pipe, (about 5/16 inch wall thickness) from the salvage yard and my own door with a draft on each end so I can control the burn.
Once I get a good bed of coals going, I can put a three foot long log in it fourteen inches in diameter. Depending on the weather, it will hold a fire for as much as two days.
Thank you very much for your comments! Your barrel stove looks really effective! 😊👍👍
An "A" for fitting & fabrication! The welding(?)... and somebody buy this poor guy a cutting torch or plasma cutter! LOL very cool!
Thank you very much! 😊👍
Very cool stove! It has kind of a steampunk vibe.
Thank you very much!! I agree about the steampunk vibe! It wasn't done intentionally but it turned out very cool! 😊👍👍
To all the keyboard critics. Step forward & make a video to prove your superiority.
Cha-ching
Thank you very much for your comment! Right to the point!
Wow! There's a lot of critics on this channel, maybe they should make one of their own and show us how to do it the right way! 🤷♂️ By the way nice job! You took a bunch of scrap and turned it into something functional!
Thank you very much for your comments! I am glad you liked my creation.
As we all know it is easier to criticize from the comfort of our couch...TH-cam is full of "keyboard experts"...
Either way I don't give an F about them. I will continue to have fun while building stuff from scrap! Take care, greetings from Greece!! 🇬🇷😊👍
We had one similar at the barn sized Chalet, made of Truck Drum Brakes. It had fewer doors, didn’t have window door but I was so effective. Stack it in the morning and when we got back late afternoon, stock it and it would keep the whole place warm. Very economical wood wise.💚👍🏼🇦🇺
Thank you very much for your comments!! Greetings from Greece!! 🇬🇷😊👍
My partner and I were building rim stoves 30 years ago and I still have one. Built one with a water jacket that made an abundance of hot water.
These wood stoves last for ever!! I didn't have a chance to use mine often because my son liked it so much that he took it and placed it in his apartment as a decorative item! 😊😄👍
@@RustisGold next video you make a wood stove for the sauna thank you so much
Thank you very much for your comments!
I just finished my next project.
It is not a wood stove, it is a fancy BBQ grill! I think you are going to like it! 😊👍
First I'll have to do a lot of video editing!
3:14 Preparing for the barbecue? Nice build indeed. :)
However, I think a flame deflector plate will improve efficiency. It's simply an angled plate where the gasses have to pass before entering the chimney pipe.
This means the gasses have to be in there for a longer time and will be burned more efficiently.
Thank you very much for your comments! I will definitely have a look on what you suggested. I wasn't aware of this detail. 👍
glad to see someone else who still stick welds
👍👍👍
I love how ya say, Thanks For Watching. Thanks for showing.. 😁
That was Awesome!
Thank you very much for your comments! Glad you liked it! 😊👍👍
Fascinating,watching the making of the stove. As it progressed along, began wondering , I sure hope to see it working. Finally , not disappointed, thanks!
Thank you very much for your comments! Glad you liked it! 😊👍
All that cutting and welding metals, my husband use to do that,drove our neighbors nuts!!
😄😄😄 Thank God I have very nice neighbors!! ... although I think I drive them crazy some times!
I could see myself “trying” to make this lol. It looks awesome! Great job
Thank you very much for your comments! 👍 You should try as well! Why not??
Huge labor investment! Cool (no, hot) finished product. Thumb up! Damper door seemed crude, I have not heated with wood for decades, I might not remember right, but I think my stove had slides that were able to fine tune incoming air for a really long burn time.
Thank you very much for your comments! I do the same thing with the lower door and adjusting the air flow...
Great idea of re-cycling usage. This stove also works like a room heater. Well done.
Thank you very much for your comments! 😊👍
Great Work ! You can also use a jam nut (second nut) on the inside, and control the tightness of the levers.
Thank you very much! Thanks for the tip!
Aqui Brasil , Fantástico, seu trabalho!!
Muito obrigado por seus comentários! Estou feliz que você gostou! Saudações da Grécia!! 🇬🇷😊👍
Best diy wood stove I seen so far great job. People that are hating on your welds well they’re just haters. As long if it holds. That’s why they’re grinders for
Thank you very much for your comments. A lot of people just love to sit on their comfortable couch and type negative comments while eating garbage food and drinking beer! I know it's not the best welding but I am not a professional welder and this is not a welding competition. Plus I used the grinding wheel and they look just fine. I am not trying to sell the objects I create. Just trying to show to other people how they can transform pieces of garbage into nice looking and functional objects... Take care! 😊👍
Excellent! This store would last more than a thousand years!
Thank you very much for your comments! I am sure it will last for a REALLY LONG TIME!!! 😊👍 Archaeologists from the future might find it one day and be confused! 😄😄
More than once I said "Ah, cool." For me that's the ultimate compliment and rarely, rarely said.
Thank you very much!! I am really glad you liked it!! 😊👍👍
This really matches with the name Rust is Gold. Bravo!
Thank you very much! 😊👍
It is hard to believe, someone who can stick weld & use the proper tool for the job on youtube!
Great Job, bet simi rims would have made one to heat a whole house, great job.
Thank you very much for your comments! I am glad you liked it! 😊👍👍👍
This guy is incredibly talented and gifted beyond imagination. He probably could create anything from metal if given the blueprints and equipment.
Thank you very much for your comments! I appreciate... 😊👍
I really like the wood stove. You're very talented.
Thank you very much for your comments! I am glad you liked it! 😊👍
Love the idea. I'm gonna use the same idea with semi rims that way I can put a bigger stick in.
Thank you very much for your comments! Good luck with your project! 😊👍👍
@@RustisGold okej
👍
Beautiful job! Just remember, it is the imperfection that makes it so perfect. I love the character of the stove! I would love to own it. Awesome job!
Not a bad design using wheel rims and I like the ideas of the drain covers being repurposed, as said it's a bit messy on the welding but if your happy then that's what matters a good enjoyable video thanks
Thank you very much for your comments! As I've said before, I am not a professional. Just having fun bringing back to life all kinds of old materials and objects! Take care 👍👍
This is a masterpiece of design and construction! I envy your many talents. Extremely well done. 👍
Thank you very much for such positive comments!!! I am glad you liked it!! 😊👍👍
Wow... watched this and gonna bang one of these out in an hour... 5 years later, the wife asking what the rims have been sitting here all this time for... Waiting till I have skills .. Nice work.
Thank you very much for your comments!! 😄😄😄👍👍👍
That's one heavy-duty stove, nice! Imagine using big rig rims, lol!
Thank you very much for your comments!! 😊👍
Maestro.......what a beauty........bravissimo...i dlove to have a smoker made like that....top class....
Thank you very much for your comments!! 😊👍
Bravo! And thank you so much , for a vid without music - rare!
Thank you very much for your comments. I used to put music on my videos but I decided it's not worth it... You cannot satisfy all these different music preferences... What one person thinks is cool music the other hates it.... Take care! 😊👍
@@RustisGold
1) Music, belongs only in music vids!
2) Who wants music, will find music.
3) Working vid - working sounds!
ONLY original sounds - never playback!. Be a purist!
What an insane amount of work!
It is the final outcome that matters!! 😊👍👍
Me encanta esta estufa. Chulísima!!! Gracias por compartir 😊
¡¡¡Muchas gracias por tus comentarios!!!
Manly perfection! I would love to know how many hours it took and your final cost for supplies. Hope you keep it in your family. Thanks for letting us watch.
Great to see ingenuity, and then sharing it!
Thanx!
Thank you very much for your comments!!! 😊👍
Nice stove a bit of fire rope to seal the doors and it’s spot on well done
Thank you very much for your comments! I did it . However when I was building the wood stove it was during the covid lockdown and it was impossible to buy some this is why it is not shown on the video... 😊👍👍
Whilst it did seem a lot of work you have made a fantastic job in creating a truly unique stove, well done
Thank you very much for your comments! Glad you liked it! It is true it involved a lot of work but still I had fun building it! 😊👍
American ingenuity at it's best! Far exceeds my skill set to even begin... Enjoyed watching, none the less!
Thank you very much for your comments, however, I am not American, I am Greek 🇬🇷😊👍👍
Well done 👍 NO MUSIC and PEOPLE TALKING ABOUT NOTHING,
ANYWAY VERY INTERESTING
Thank you very much! Glad you liked it! 😊👍
Very nice, it's actually beautiful. Wonderful Craftsmanship!!!
Thank you very much for your comments! I am glad you liked it! 😊👍
Experience and dedicated effort at work is this mans know how to industrial ingenuity. Thumbs up to You Sir!... You have talent and the tools needed to make life worth living for, with the ease of the needed comforts to happiness.
Thank you very much for such positive comments!! I am glad you liked my creations!! 😊👍👍
Para mí, ha sido el mejor trabajo de herrería en cuánto a estufas se refiere, has sido muy prolijo, profesional y pulcro en tu trabajo, has hecho una verdadera obra maestra, eres genial en los acabados y la selección de materiales y accesorios, muy buena terminación y gran técnica, de verdad, es una gran pieza, te felicito, ha sido placentero y edificante ver tu vídeo de principio a fin.
Mucha felicidades.
P. D. Mis comentarios los hice en español, por qué es mí lengua natal, y porque tú trabajo rebasa fronteras e idiomas, tu calidad rebasa límites.
Muchas gracias por tus comentarios. ¡Me siento realmente honrado por comentarios tan agradables y positivos! ¡¡¡Estoy muy contento de que te haya gustado mi proyecto !!! Saludos desde Grecia 😊🇬🇷👍 !!! (no hay problema con escribir en español, ¡uso el traductor de Google! 👍)
Dude that's awesome it's on another level .
Thank you very much! Glad you liked it!! 😊👍👍
You sir, are a fucking genius! Phenomenal idea and very well done. I love it when I come across fabrications like these especially sped up 2x. I set it on 2x on my end because I'm savage like that.
And to all you arm-chair critics with your "you should do this, you should do that" y'all should honestly gfys.
Thank you very much for such positive comments! Not a genius... just love to create things out of garbage! I a couple of weeks from now I'll finish a project I am working on for the last month. A very unique BBQ, completely made out of scrap metal! Stay tuned my friend! Greetings from Greece!! 🇬🇷😊👍
@@RustisGold Thanks for the reply and I look forward to more of your content. Have s blessed day all the way from Florida.
😊❤️👍👍
Now that's skill at it's finest
Wow, this little stove is way cool dude. I used to love to go to my dad's garage and sit with him near one that he had. His was made from a 50 gallon drum. He made it, laying it on its side. It was great when I was a kid! He did a lot of wood working and it got cold in Maine in winter back in the 70's. I liked your video and subscribed!❤
Thank you very much for your comments!!! I am glad you liked my video!! Thanks for subscribing! 😊👍👍
Fantastic job 👏👏👏....From a fellow fabricator in Scotland 👍
Thank you very much!!! Glad you liked it! Greetings from Greece! 🇬🇷😊👍
The rebar will not last in the fire chamber you need cast iron. You need to use harden bolds for all your hard ware. The low grade bolds will always loosen up. You should of used wood stove glass rope gasket behind your glass they sell it in all shapes and sizes the expanding and contracting might crack your glass I hope it’s tempered for wood stoves.
A lot of hard work and ingenuity went into this good looking little stove!
I could do this I’m sure 🙄 but I’d probably use it as a plant stand!🤣
Good job guy👍
Thank you very much for your comments!! 😊😊👍👍
To be honest my son... confiscated it and placed it to his apartment as a decorative item!! 😊
Me encanto!!! Qué buena idea para reciclar esas cosas!!! Divino trabajo ,inspirador gracias!!
¡¡Muchas gracias por tus comentarios!! ¡¡Me alegro de que te haya gustado!! 😊👍👍 Saludos desde Grecia !! 🇬🇷
Saludos desde mar del plata argentina
I love it , liked and subbed right away . painting the parts silver was a great touch , made it it look cooler than it already did in the first place . i love seeing good solid metal getting recycled into cool stuff , well done mate 👍👍👍
Thank you very much for your comments!! I am glad you liked my video!! 😊👍
Unless space is a concern, I would leave the cast sewer covers full size to help diffuse out the heat. Old two piece truck rims would make a nice fat stove, they're not street legal most places (and dangerous ass hell) so this would be a good way to retire them. Kudos, nice build sir.
Thank you very much for your comments! Glad you liked it! Truck rims would be a really cool idea! Not very easy to find...
Φίλε μου, είσαι πραγματικά φοβερός. Bravo.
Σε ευχαριστώ πολύ, να είσαι καλά! 😊👍
You made a very nice stove and can be very proud of your work and sharing.
Thank you very much!! 😊👍👍
I always enjoy watching creative videos I give a thumbs up!
Thank you very much for your comments! I am glad you liked it!! 😊👍
Awesome job. A beautiful & fun wood burner!
Thank you very much for your comments!!! Glad you liked it!! 😊👍👍
seemed like ALOT of work but the fact you have capability and knowledge of how to do this is amazing and great.
Thank you very much for your comments! It's true that it involved a lot of work but this is my hobby! It gives me great pleasure!! 😊👍👍
TRUE ARTIST
THANK YOU FOR SHARING THIS OUTSTANDING JOB
Thank you very much!! I am glad you liked it!! 😊👍