Making a guitar, even the best DIY guitar kits requires help from this jig!
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2019
- Making a guitar requires the guitar pro builder to get the acoustic guitar sides even. The acoustic guitar backside of the guitar is cut down perfectly and Monty makes a prototype bracing jig on this video to secure the guitar. Even with all guitar building kits, this guitar building jig is needed. The guitar pro builder uses a sanding to provide an easy solution to the problem of getting the sides level. Now, it's starting to look like a custom-built acoustic guitar.
Thanks for watching! Don't forget to SUBCRIBE, Like & Share this video if you enjoy it! II hope you have an outstanding day... Monty
Subscribe to free lessons on building acoustic guitars:
www.TH-cam.com/c/montymckinn...
Like & Share this video with your friends
Your comments are important and I thank you for your encouragement.
SAFETY FIRST!!!!!!
FIRE EXTINGUISHER (Don't Ignore This)
Stay safe, alert and work in a well ventilated area: This is a (MUST HAVE PROTECTION) for your workshop and home.
In Canada: amzn.to/38P2omn
In USA: amzn.to/2WvsNRl
FIRST-AID KIT (Don't Ignore This)
It is a good idea to be prepared for any emergency. Check out the first aid kit here:
In Canada: amzn.to/2OcFGuK
In USA: amzn.to/2ZdO7fJ
EYE PROTECTION
Always wear eye protection when working in your workshop. It is better to be safe than lose one's sight. (THIS IS A MUST HAVE ITEM)
In Canada: amzn.to/2WeRNvS
In USA: amzn.to/2ASCAZR
GUITAR BUILDING BOOKS/PRODUCTS/TOOLS I USE:
Guitarmaking: Tradition and Technology William R. Cumpiano: (MUST HAVE BOOK)
In Canada: amzn.to/3fgoNe4
In USA: amzn.to/2ZpNzlX
Classical Guitar Making:
In Canada: amzn.to/2AzXblv
In USA:amzn.to/2BVB49G
Making an Archtop Guitar:
In Canada: Robert Benedetto: amzn.to/2Y0GA3s
In USA: amzn.to/2NNnjN2
Digital Caliphers (MUST HAVE)
In Canada: amzn.to/2Y40aM4
In USA amzn.to/31Bzg03
Glues I Use:
Super Glue:
In Canada: www.starbond.com/?rfsn=370491... MCKINNON at checkout 15%
In USA: www.starbond.com/?rfsn=370491... MCKINNON at checkout 15% off
TiteBond
In Canada: TiteBond Glue: amzn.to/2V3KtCK
In USA: TiteBond Original Glue: amzn.to/2YlyiTX
TiteBond Hide Glue
In Canada: amzn.to/2YjSCoy
In USA: amzn.to/2YNpcOI
GUITAR FINISHING POLISH
Mequiar's Swirler Remover
In Canada: amzn.to/2YiAZ8J
In USA: amzn.to/2BZFIDj
CAMERA GEAR I AM USING:
DJI Osmo Mobile 3 Combo:
In Canada: amzn.to/2XVTVKi
In USA: amzn.to/2BZFWu9
Canon Rebel T7i:
In Canada: amzn.to/3cXgr9N
In USA: amzn.to/31AXWG0
Canon 6D Mark II:
In Canada: amzn.to/3dYxMAF
In USA: amzn.to/2NNaT7C
Sigma Lens 24-70mm for Canon:
In Canada: amzn.to/30Qiydl
In USAamzn.to/2BWqvTE
Rode Videomic Pro Plus
In Canada: amzn.to/2Yg7VPh
IN USA:amzn.to/2ZH1Rij
iPhone 11 Pro:
In Canada: www.apple.ca
In USA: www.apple.com
CURRENT REFRESHMENT OF CHOICE:
In Canada:
English Breakfast loose Tea: theteahaus.com
In USA:
English Breakfast loose Tea: theteahaus.com
Yorkshire Tea Decaf Tea: amzn.to/2BmgfnY
LET'S CONNECT:
Email: tryitnow1940@gmail.com (Send general inquires here)
Email: teawithmonty@gmail.com (Send your Questions here)
Email: ShopwithMonty@gmail.com (Send Shop Photos here)
Let's Connect with Social Media:
Follow along on Instagram: / montymckinnon
Follow along on Twitter: / @montymckinnon1
Follow on Facebook: / monty.mckinnon.77
MAILING ADDRESS
Address change:
Monty McKinnon
248 Avenue Road
Newmarket ON Canada L3Y 1N9
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#guitarcenter #guitar #music #Macdonald #martin - แนวปฏิบัติและการใช้ชีวิต
Damn the quality of this channel is getting better and better. 👏👏
I hope so.
Monty you have good energy and Peter is lucky to have you as his dad.
Thank you very much but I'm lucky to have him as my son! lol
I started with Tenor Ukes and have one finished, one a third of the way finished and a Baritone that I'll be starting in a week or so. It sure is both fun and in a sense compelling to build a stringed instrument whether guitar or Uke or...
I'd say anyone with fitting tools and patience can build one. Lots of patience because lots of jigs for various functions such as neck alignment are needed.
I chose the Ukes because, as is, my Band-Saw can only slice off up to 4 inch wide pieces that then are glued to form the soundboard or back. I like cutting off these slices myself because every 1 dollar piece of wood becomes $30 plus dollars when the adjective luthiers is applied to the piece. For example my first Uke has a Redwood top and back. It cost me nothing because it was formed from scrap material that came from a children's out door play ground set. On the other hand the Guitar Wizzard at Luthier Mercantile says the top is worth $200.
Well done!!!
The problem with building guitars and ukuleles is the fact that once you've built one by the time you finish it you were already starting to think about what would you want to use for the next one. At least that's what happened to me. And now I am about 26 or 27 guitars built or somewhere around there.
Love your Vids Dad
thank you so much. That is very kind. Now, please forward them to your friends. Thanks!!!
Yayyyyy, another Monty video! Time to grab some English Breakfast tea!
Thanks
The Ridgid floor drill press is the most true, square and straight. It has precisely ground cast iron castings, and it has the best rigidity. Got it at Home Depot and its been a solid tool.
thanks for the tip.
Monty we love you, you are always sooo positive, greetings from Manchester :)
Wow, thank you very much. I enjoy having you here.
Looking great. Monty.
Thanks
Tea time with Monty - bring it on! :-)
Yup, let's do it
You teach very well. I can finally gain some knowledge for a lifetime hobby i'd like to pursue. Don't have the fancy equipment, but for now, i only have a set of wood chisel, a drill, and a hand-held jigsaw. Thanks for the video! Subscribed-👌
Welcome, I'm happy you are here.
The more and more I watch these videos, the more and more I get a renewed interest in building acoustic guitars. (when I was younger, I was only brave enough for electric haha) - not a super simple process, I know, but looks so enjoyable and very rewarding, I bet!
for sure. You should build along with me.
Found your channel through Peter. I love your demeanor! It's calming. I think that maybe it's a good idea to "bring" us with you while you're shopping? I'm not into making guitars, but I noticed I enjoy watching behind the scenes of people I follow (like your son). Maybe your niche market would appreciate that! Greetings from the Philippines!
I want to do that. great idea.
At first I thought that sanding disk was a lazy susan 😂 That answered all my questions from the chatter video.
Enjoy the tea and thank you Monty.
Thank you sir!
thank you
I hate coffee blehhh lol 😂 thank you for the video. I share your love of tea. Have a great day.
You as well.
The jig is up!
Oh that is a good one. Lol
Ok. I now understand the speed of the videos. I love it! Anticipation is growing. I’ll keep watching! Good job Monty!
Thank you. Tuesday should help when you see the intro.
I'm really enjoying the intro sequence. A brief overview of whats to be covered, then roll the intro. Keep up the great work Monty, and thank you for your contribution.
It will happen on Tuesday morning.
Hah! OD on EB, I nearly spat my coffee out, love the one liners Monty. The guitar is looking awesome, it really does make you want to build your own. Thanks Mate! 👍
As long as you follow your passion, I'm happy. Do it! lol
Another great video! You really are innovative when it comes to jigs. I’m picking up lots of tips from you. As to drill presses - my Craftsman table top drill press has held up very well and takes little space.
Good suggestion I check it out.
BASED
Totally not sponsored by HomeDepot :)
Wouldn't that be nice.
I drink both tea and coffee, they both have a place in my life. Maybe it's because I'm English?
It looks like I do as well. Lol
I'm Australian and some time ago was doing some work in an English university for a few years. The staff lounge room served morning coffee and afternoon tea. It was immutable. If you wanted tea in the morning or coffee in the afternoon you went to the student cafeteria.
Oh that is too funny. I hope they had biscuits!!! lol
#LiveYourPassion Marty you are just the best, I really like your TH-cam channel !! Love the beautiful guitars. 🌞🚐🇺🇸
Thank you. Just wait until Tuesday.
I got behind on your vids Monty. I’ve been adventuring in the wilderness. I hope you will forgive me. Mountain season is about done though... 🤙🏻
I'm happy you are back.
I have never tried tea. Im curious now
Oh, you won't be disappointed. It is great.
End wedge next before the kerfed lining? I did this step out of order and it complicated things.
I will do the linings next week.
:D
I did it with the Woodglut plans.
Having a set of plans is always a help for me.
At first I thought that sanding disk was a lazy susan 😂 That answered all my questions from the chatter video.
Enjoy the tea and thank you Monty.